Benutzeranleitung / Produktwartung JAX-S8 des Produzenten Sony
Zur Seite of 27
Mini Hi-Fi Component System 4-247-532-21 030327AMI-NV -FM JAX-S8.
2 En W ARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 En T ABLE OF CONTENTS PRECAUTIONS .................................... 2 PREPARA TIONS ................................... 4 PAR TS AND CONTROLS ......................... 5 ADJUSTMENTS BEFORE OPERA TIONS ...... 10 CD OPERA TIONS ....................
4 En Connection Plug in the AC power cord to the AC power outlet after all other connections are made. 1 Connect the front speakers. Connect the right front speaker (marked with “R”) to the SPEAKER R terminals and place it on the right side of the unit.
5 En Main unit: rear Refer to the pages indicated in parentheses for details. 1 AM LOOP , FM 75 Ω terminals (4) Plug in the supplied AM and FM antennas here. 2 VIDEO (MD) jacks Accepts analog sound signals from external equipment. Connect using an optional connecting cable with RCA phono plugs (red plug to R jack, white plug to L jack).
6 En 1 DISC CHANGE/DISC SKIP (12) Rotates the CD trays. 2 POWER 6 ST ANDBY/ON (10) Switches the unit on and off (standby). The red indicator flashes when receiving a signal from the remote. 3 T APE A/B (18) Selects T ape function, and deck A or B. TUNER BAND (17) Selects T uner function and the radio band.
7 En # BASS (20) Adjusts low frequency sound. SURROUND (21) Switches surround on and off. i-Bass (20) Produces rich and clear low frequency sound. $ DISPLA Y (1 1, 12, 15) Displays the time and the remaining time for CD. When the unit is off, press DISPLA Y to switch between DEMO, Clock and ECO display modes.
8 En Buttons with the same or similar names with the main unit basically have the same function. 1 POWER (10) 2 1-0/10, +10 (12, 14, 15) Selects a CD track of the specified number . The numbered buttons take on these functions below when pressed together with SHIFT held down : EDIT (19) Enters Automatic CD dubbing mode when pressed in stop mode.
9 En 9 FUNCTION Switches the active function among CD, T APE, TUNER and VIDEO (MD). 0 DISC SKIP (12, 14) Select a disc. ! c / d (12–14) CD and T ape: starts playback. s CD and T ape: stops playback. f , g (12, 17, 18) CD: searches a track in fast forward or fast reverse playback when held down.
10 En ADJUSTMENTS BEFORE OPERA TIONS Power Tu rning the unit on Press POWER 6 ST ANDBY/ON (POWER on the remote). Pressing T APE A/B, TUNER/BAND, VIDEO (MD) or CD also turns the unit on (Direct Play Function.) Tu rning the unit off Press POWER 6 ST ANDBY/ON again.
11 En Dimmer Adjusts the brightness of the display . 1 Press MODE repeatedly until “ DIMMER ” appears in the display when the unit is turned on and then press ENTER. 2 Tu rn MUL TI JOG to select one of the four dimmer modes “ DIMMER 0 ” to “ DIMMER 3 ” and then press ENTER.
12 En This unit plays back finalized CD-R/RW discs as well as audio CDs. Playback 1 Press CD and load disc(s). Press z OPEN/CLOSE to open the disc compartment and place one or two disc(s) with the labelled side up. To place thr ee discs, press DISC CHANGE/DISC SKIP so that the trays rotate, then place the third one.
13 En Repeat playback Plays all the tracks or one track on the discs repeatedly . 1 Press MODE repeatedly until “ REPEAT ” appears in the display and then press ENTER. 2 T urn MUL TI JOG to select one of the two repeat modes as below or “ REP OFF ”, and then press ENTER.
14 En Programed playback Yo u can program the unit to playback selected tracks from one or more discs in any order you specify . 1 In the stop mode, press MODE repeatedly until “ PLAYMODE ” appears in the display and then press ENTER. 2 Tu rn MUL TI JOG to select “ PROGRAM ” and then press ENTER.
15 En Playback This unit plays back MP3-CDs: discs recorded with MP3 tracks (files). Basic operations for MP3-CDs are mostly the same as those in “CD OPERA TIONS”. This section explains MP3-CD OPERA TIONS where there is additional information or exceptions to the information in “CD OPERA TIONS”.
16 En Notes on display indications during play • Up to 32 characters are displayed for the title of an album or a track. If ID3T AG version 1.X was applied to record additional information for an MP3 track, up to 30 characters showing track title is displayed.
17 En TUNER OPERA TIONS Manual tuning 1 Press TUNER BAND (SHIFT+BAND on the remote) repeatedly to select a band (FM or AM.) 2 Press f or g to tune in to a station. “ TUNED ” appears when a station is tuned in. “ 1 ” lights up for FM stereo reception.
18 En T APE OPERA TIONS T APE A/B CD SYNC T APE A/B MUL TI JOG ENTER MODE Deck B PUSH EJECT/CLOSE Deck A REC P A USE/ ST ART PUSH EJECT/CLOSE EDIT SHIFT PLA Y MODE DISC DIRECT PLA Y 1-3 DISC CHANGE/ DISC SKIP DISC SKIP Playback Use only TYPE I (normal) tapes.
19 En Basic recording Use only type I (normal) tapes. Deck B is the recording deck. 1 Insert the recordable tape in deck B. Press z PUSH EJECT/CLOSE to open the outer cassette holder , and insert with the exposed side down and the side to be recorded on facing out from the unit.
20 En SOUND ADJUSTMENTS SOUND SURROUND TREBLE/ MIDDLE HEA VY , V OCAL, SALSA, TECHNO , HIP HOP , MANU AL SURROUND MUL TI JOG i-Bass BASS ENTER MODE GEQ SHIFT TREBLE and MIDDLE TREBLE enhances high frequency for sound clarity and MIDDLE enhances mid frequency for presence.
21 En Graphic equalizer Selects a sound equalization curve to match the music type. Press HEA VY , VOCAL, SALSA, TECHNO, HIP HOP or MANUAL. On the remote, press SHIFT+GEQ and then press r or t repeatedly within 2 seconds. The selected equalization curve is displayed.
22 En TIMER OPERA TIONS Sleep timer Tu rn s off the unit automatically after a specified time. Press SLEEP on the remote repeatedly . With each press, the timer duration changes cyclically as follows: “ AUTO ” * “ 90 ” “ 80 ” - - - “ 10 ” “ OFF ” The unit turns off after the selected time.
23 En Choosing a Timer function Y ou cannot use both Timer playback and T imer recording at the same time. If both have been set, choose one or the other . 1 Press CLOCK/TIMER/SELECT on the remote. “ SELECT ” is displayed. 2P r ess r or t to select “ DAIL Y ” (Timer playback) or “ REC ” (Timer recording) and press ENTER.
24 En Care and maintenance Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. To clean the cabinet Use a soft and dry cloth. If the unit surfaces are extremely dirty , use a soft cloth lightly moistened with mild detergent solution.
25 En Resetting the unit If an unusual condition occurs in the display window or the cassette deck, reset the unit as follows: 1P r ess POWER to turn off the power . If the power cannot be turned off, disconnect the AC power cord, then plug it in again.
26 En Specifications MAIN UNIT CX-JS8 TUNER FM tuning range 87.5 MHz to 108 MHz FM usable sensitivity (IHF) 13.2 dBf FM antenna terminal 75 ohms (unbalanced) AM tuning range 530 kHz to 1710 kHz (10 kH.
Printed in China Sony Corporation http://www .aiwa.com/.
Ein wichtiger Punkt beim Kauf des Geräts Sony JAX-S8 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony JAX-S8 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony JAX-S8 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony JAX-S8 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony JAX-S8 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony JAX-S8 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony JAX-S8 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony JAX-S8. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony JAX-S8 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
