Benutzeranleitung / Produktwartung HT-1800DP des Produzenten Sony
Zur Seite of 48
HT-1800DP 4-244-184-11(2) US Home Theater System 4-244-184- 11 (2) HT -1800DP Owner’s Record The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 US HT-1800DP 4-244-184-11 (1) US – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
3 US HT-1800DP 4-244-184-1 1 ( 2 ) US T able of Contents Other Operations Naming preset stations and program sources ........................................... 31 Recording ............................................ 31 Using the Sleep Timer .......
4 US HT-1800DP 4-244-184-1 1 ( 2 ) US A KERS IMPEDANCE USE 8 – 16 Ω CENTER SURROUND R R L L 4-XXX-XXX-XX AA Area code About This Manual The HT-1800DP consists of: – Receiver STR-K751P – Speake.
List of Button Locations and Reference Pages 5 US HT-1800DP 4-244-184-1 1 ( 2 ) US g ?/1 qd qf qg qh qj qk ql w; wa wd ws wf wh wg wj 17 8 4 0 qa qs 5 23 6 9 List of Button Locations and Reference Pages Main unit How to use this page Use this page to find the location of buttons that are mentioned in the text.
6 US HT-1800DP 4-244-184-11( 2 ) US Hooking Up the Components Before you get started • Turn off the power to all components before making any connections. • Do not connect the AC power cord until all of the connections are completed. • Be sure to make connections firmly to avoid hum and noise.
Hooking Up the Components 7 US HT-1800DP 4-244-184-11( 2 ) US Antenna hookups FM wire antenna (supplied) AM loop antenna (supplied) Notes on antenna hookups • To prevent noise pickup, keep the AM loop antenna away from the receiver and other components.
8 US HT-1800DP 4-244-184-11( 2 ) US y AM FM 75 Ω COAXIAL DIGIT AL ANTENNA MONITOR SUB WOOFER VIDEO 1 VIDEO 2 DVD MD/T APE CD OPTICAL VIDEO 2 IN DVD IN COAXIAL IN OUT IN AUDIO IN AUDIO IN AUDIO OUT A.
Hooking Up the Components 9 US HT-1800DP 4-244-184-11( 2 ) US y AM FM 75 Ω COAXIAL DIGIT AL ANTENNA MONITOR SUB WOOFER VIDEO 1 VIDEO 2 DVD MD/T APE CD OPTICAL VIDEO 2 IN DVD IN COAXIAL IN OUT IN AUD.
10 US HT-1800DP 4-244-184-1 1 ( 2 ) US y AM FM 75 Ω COAXIAL DIGIT AL ANTENNA MONITOR SUB WOOFER VIDEO 1 VIDEO 2 DVD MD/T APE CD OPTICAL VIDEO 2 IN DVD IN COAXIAL IN OUT IN AUDIO IN AUDIO IN AUDIO OU.
Hooking Up the Components 11 US HT-1800DP 4-244-184-1 1 ( 2 ) US Connecting the AC power cord Before connecting the AC power cord of this receiver to a wall outlet, connect the speaker system to the receiver (page 12). Connect the AC power cord(s) of your audio/ video components to a wall outlet.
12 US HT-1800DP 4-244-184-1 1 ( 2 ) US SPEAKERS IMPEDANCE USE 8 – 16 Ω MONITOR SUB WOOFER VIDEO OUT AUDIO OUT FRONT CENTER SURROUND R R L L R R L L E e E e A A INPUT AUDIO IN B E e A E e A E e A b.
Hooking Up and Setting Up the Speaker System 13 US HT-1800DP 4-244-184-1 1 ( 2 ) US Stripped cords are touching each other due to excessive removal of insulation.
14 US HT-1800DP 4-244-184-1 1 ( 2 ) US 45 ° 90 ° 20 ° B C C AA Performing initial setup operations Once you have hooked up the speakers and turned on the power, clear the receiver’s memory. Then specify the speaker parameters (size, position, etc.
Hooking Up and Setting Up the Speaker System 15 US HT-1800DP 4-244-184-1 1 ( 2 ) US 45 ° 90 ° 20 ° B C C A A continued When placing surround speakers behind you (wide room) Note Do not place the center speaker further away from the listening position than the front speakers.
16 US HT-1800DP 4-244-184-1 1 ( 2 ) US 60 30 A B A B Multi channel surround setup (continued) x Front speaker distance ( L R DIST. XX ft.) Set the distance from your listening position to the front speakers ( A on page 14). x Center speaker distance ( C DIST.
Hooking Up and Setting Up the Speaker System 17 US HT-1800DP 4-244-184-1 1 ( 2 ) US continued Tip The surround speaker placement parameter is designed specifically for implementation of the Digital Cinema Sound modes with virtual elements. With the Digital Cinema Sound modes, speaker placement is not as critical as other modes.
18 US HT-1800DP 4-244-184-1 1 ( 2 ) US Multi channel surround setup (continued) x Surround speaker size ( SL SR XXXXX) • If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE”. Normally, select “LARGE”.
Hooking Up and Setting Up the Speaker System 19 US HT-1800DP 4-244-184-1 1 ( 2 ) US LEVEL POWER POWER indicator Listening to the sub woofer First, turn down the volume on the receiver. The volume should be set to minimum before you begin playing the program source.
20 US HT-1800DP 4-244-184-1 1 ( 2 ) US Basic Operations Selecting the component Input Selector buttons Press the input selector button to select the component you want to use.
Basic Operations 21 US HT-1800DP 4-244-184-1 1 ( 2 ) US Changing the display DIMMER Press DIMMER repeatedly to adjust the brightness of the display (3 steps).
22 US HT-1800DP 4-244-184-1 1 ( 2 ) US Enjoying Surround Sound Enjoying higher fidelity sound The Auto Format Direct (A.F.D.) mode allows you to select the decoding mode you want for your audio sound.
Enjoying Surround Sound 23 US HT-1800DP 4-244-184-1 1 ( 2 ) US continued Selecting a sound field You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to. Press To select MOVIE C.
24 US HT-1800DP 4-244-184-1 1 ( 2 ) US Selecting other sound fields Press MUSIC repeatedly to select the sound field you want. The music indicator lights up and the current sound field is indicated in the display. x HALL Reproduces the acoustics of a rectangular concert hall.
Enjoying Surround Sound 25 US HT-1800DP 4-244-184-1 1 ( 2 ) US Understanding the multi channel surround displays STEREO D.RANGE COAX OPT MONO MEMORY DIGITAL SP PRO LOGIC II aa SLEEP DTS LCR SW SL SR S LFE 12 3 4 5 6 7 8 9 q; qa qs 6 Tuner indicators: Lights up when using the receiver to tune in radio stations, etc.
26 US HT-1800DP 4-244-184-1 1 ( 2 ) US qs Playback channel indicators: The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speakers settings).
Enjoying Surround Sound 27 US HT-1800DP 4-244-184-1 1 ( 2 ) US Front balance ( L R BAL. L/R XX) Lets you adjust the balance between front left and right speakers. Center level (CTR XXX dB) Lets you adjust the level of the center speaker. Surround left level (SUR.
28 US HT-1800DP 4-244-184-1 1 ( 2 ) US Receiving Broadcasts bbbb 1 0 2 5 0 bbb 1 3 5 0 Before receiving broadcasts, make sure you have connected FM and AM antennas to the receiver (page 7). Direct tuning You can enter a frequency of the station you want directly by using the numeric buttons on the supplied remote.
Receiving Broadcasts 29 US HT-1800DP 4-244-184-1 1 ( 2 ) US continued Automatic tuning If you don’t know the frequency of the station you want, you can let the receiver scan all available stations in your area. 1 Press TUNER FM/AM repeatedly to select the FM or AM band.
30 US HT-1800DP 4-244-184-1 1 ( 2 ) US Tuning to preset stations You can tune the preset stations by either of the following two ways. Scanning the preset stations 1 Press TUNER FM/AM. The last received station is tuned in. 2 Press PRESET TUNING + or PRESET TUNING – repeatedly to select the preset station you want.
Other Operations 31 US HT-1800DP 4-244-184-1 1 ( 2 ) US Other Operations 4 Press ENTER. 5 Repeat steps 2 to 4 to assign index name for another station or program source. Recording Before you begin, make sure you’ve connected all components properly.
32 US HT-1800DP 4-244-184-1 1 ( 2 ) US Recording (continued) Using the Sleep Timer You can set the receiver to turn off automatically at a specified time.
Other Operations 33 US HT-1800DP 4-244-184-1 1 ( 2 ) US x Decode priority (DEC. XXXX) Sets the appropriate decoding for incoming digital signals. • PCM priority mode (DEC. PCM) Use to enjoy playback from audio CD (PCM) and DVD. When used with media other than CD or DVD, you may experience noise.
34 US HT-1800DP 4-244-184-11( 2 ) US You can use the remote RM-PP412 to operate the components in your system. Before you use your remote Inserting batteries into the remote Insert R6 (size-AA) batteries with the + and – properly oriented in the battery compartment.
Operations Using the Remote RM-PP412 35 US HT-1800DP 4-244-184-11( 2 ) US Remote Operations Function Button VIDEO3 Receiver To watch VCR. (VTR mode 2) DVD Receiver To watch DVD. TV/SAT Receiver To watch TV programs or satellite receiver. MD/TAPE Receiver To listen to Minidisc or audio tape.
36 US HT-1800DP 4-244-184-11( 2 ) US Remote Button Description (continued) Remote Operations Function Button AUDIO TV/ VCR/ Changes the sound to DVD player Multiplex, Bilingual or Multi channel TV Sound. SWAP*/ TV Swaps the small and ANGLE large picture.
Operations Using the Remote RM-PP412 37 US HT-1800DP 4-244-184-11( 2 ) US Remote Operations Function Button CLEAR DVD player Press if you made a mistake when you press the number button or press to return to the continuous play etc. SEARCH DVD player Select searching mode.
38 US HT-1800DP 4-244-184-11( 2 ) US Programming the remote You can program the remote to control non- Sony components by changing the code. Once the control signals have been memorized, you can use those components as part of your system. Furthermore, you can also program the remote for Sony components that the remote is unable to control.
Operations Using the Remote RM-PP412 39 US HT-1800DP 4-244-184-11( 2 ) US The numeric codes corresponding to the component and the maker of the component Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control.
40 US HT-1800DP 4-244-184-11(2) US To control a TV Maker Code(s) SONY 501, 502 DAEWOO 504, 505, 506, 507, 515, 544 FISHER 508 GOLDSTAR 503, 511, 512, 515, 534, 544 GRUNDIG 517, 534 HITACHI 513, 514, 5.
Additional Information 41 US HT-1800DP 4-244-184-1 1 ( 2 ) US Additional Information If you encounter color irregularity on a nearby TV screen This speaker system is magnetically shielded to allow it to be installed near a TV set. However, color irregularities may still be observed on certain types of TV sets.
42 US HT-1800DP 4-244-184-1 1 ( 2 ) US Troubleshooting (continued) There is no sound from a specific component. • Check that the component is connected correctly to the audio input jacks for that component. • Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the component.
Additional Information 43 US HT-1800DP 4-244-184-1 1 ( 2 ) US The FM reception is poor. Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna as shown below. If you connect the receiver to an outdoor antenna, ground it against lightning.
44 US HT-1800DP 4-244-184-1 1 ( 2 ) US Sensitivity: – Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Sensitivity: – Impedance: – S/N: 100 dB (A, 20 kHz LPF) Inputs (Digital) DVD (Coaxial) VIDEO 2 (Optical) Outputs MD/TAPE (OUT), VIDEO 1 (AUDIO OUT) SUB WOOFER Tone Gain levels: ±6 dB, 1 dB step FM tuner section Tuning range 87.
Additional Information 45 US HT-1800DP 4-244-184-1 1 ( 2 ) US AM tuner section Tuning range Models of area code U, CA With 10-kHz tuning scale: 530 – 1710 kHz 4) With 9-kHz tuning scale: 531 – 171.
46 US HT-1800DP 4-244-184-1 1 ( 2 ) US Specifications (continued) Continuous RMS power output (6 ohms, 20 – 250 Hz) 100 W Reproduction frequency range 28 Hz – 200 Hz High frequency cut-off frequen.
Additional Information 47 US HT-1800DP 4-244-184-1 1 ( 2 ) US T ables of settings using the MAIN MENU button You can make various settings using the MAIN MENU, MENU / and MENU +/– buttons. The tables below show each of the settings that these buttons can make.
< LEVEL > FRONT CENTER SUR.L. SUR.R. S.W. D.RANGE EFCT. BAL LEVEL LEVEL LEVEL LEVEL COMP 1) LEVEL 2CH ST. zz A.F.D. AUTO zz zzz z DOLBY PL zzzzz z PLII MOV zzzzz z PLII MUS zzzzz z C.
Ein wichtiger Punkt beim Kauf des Geräts Sony HT-1800DP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony HT-1800DP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony HT-1800DP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony HT-1800DP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony HT-1800DP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony HT-1800DP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony HT-1800DP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony HT-1800DP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony HT-1800DP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
