Benutzeranleitung / Produktwartung LC-32DV22U des Produzenten Sharp
Zur Seite of 62
OPERA TION MANU AL MODE D’EMPLOI MANU AL DE OPERA CIÓN 1 COMBINA TION LIQUID CR Y S T AL TELEVISION AND D VD/CD PLA YER COMBINÉ TÉLÉVISEUR A CL ET LEC TEUR D VD/CD COMBINA CION TELEVISOR CON P A.
.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert .
IMPORTANT INFORMATION • “DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc. INFORMA TION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety . However , improper use can result in electric shock and/or fire.
4 IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand — Do not place the product on an unstable cart, stand, tripod or table.
5 CHAPTER 1 2 E L T I T 1 E L T I T DVD DISC CHAPTER 2 CHAPTER 2 CHAPTER 3 CHAPTER 1 1 ALL In this unit, use only discs that meet the standard, such as those bearing the below logo marks on the disc label surface. If you use a non-standard disc, we cannot guarantee playback.
6 Handling discs Removing the Disc from its case Be sure to hold the edge of disc. Do not touch the surface of the disc. Pick up the disc gently from the case. • Do not scratch the disc. • Do not get dirt on the surface of the disc. • Do not stick a label or adhesive tape on the disc.
7 NO TE • Always use the AC cord supplied with the TV/DVD. QUICK REFERENCE Short screws ( X 4) (used in step 2) Long screws ( X 4) (used in step 3) Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal. Before performing work spread cushioning over the base area to lay the TV on.
8 QUICK INSTALLATION TIPS 1. Attach your antenna to the back of the TV/DVD. (See page 13.) 2. Connect the AC plug for the TV/DVD into the wall outlet. • Place the TV/DVD close to the AC outlet, and keep the power plug within reach.
9 QUICK REFERENCE If the remote control fails to operate TV/DVD functions, replace the batteries in the remote control unit. 1 Open the battery cover. • Place the batteries with their terminals corresponding to the (+) and (–) indications in the battery compartment.
10 IMPORTANT INFORMATION ................................... 1 Trademarks .............................................................. 2 DEAR SHARP CUSTOMER ..................................... 3 IMPORTANT SAFETY INSTRUCTIONS .................. 3 Disc .
11 PLA Y STOP SKIP EJECT Part names POWER button TV/DVD (Front) Channel buttons ( CH / ) Volume buttons ( VOL – /+) INPUT button NOTE • INPUT, CH ( )/( ), VOL ( – )/( + ) and POWER on the main unit have the same functions as the same buttons on the remote control.
12 Part names Remote control unit 1 3 6 5 4 2 22 23 14 15 16 18 19 17 20 21 26 25 29 30 31 27 28 11 12 13 9 10 7 8 24 1 POWER : Switch the power on or enters standby mode. (See page 17.) 2 0–9: Set the channel. (See page 17.) 3 • (DOT) / SUBTITLE: To select 4-digit channel number.
13 F-type connector should be fingertightened only. When connecting the RF cable to the TV set, do not tighten F-type connector with tools. If tools are used, it may cause damage to your TV set.
14 You can connect many types of external equipment to your TV/DVD like a DVD player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the TV/DVD.
15 Using digital audio output It is possible to output audio through the COAXIAL DIGITAL AUDIO OUTPUT terminal. (See page 23 for details.) PCM audio outputs from the terminal.
16 Connecting HDMI equipment You can use the INPUT4 or 5 (LC-26DV22U/LC-26DV22U-W: INPUT 4 only) terminal when connecting HDMI equipment. HDMI cable (Commercially available) HDMI equipment When using an HDMI-DVI conversion cable, use INPUT4 and AUDIO terminal.
17 Simple operations for watching a TV program Watching TV Changing channels You can change channels in several ways. Turning on the power Press POWER on the TV/DVD, or POWER on the remote control. • POWER indicator (Green): The TV/DVDS is on. (“PLEASE WAIT” will appear for a few seconds on the screen.
18 Watching TV 1 SETUP LANGUAGE ENGLISH CLOCK SET 12:00AM AIR/CABLE CABLE AUTO CH MEMORY ADD/DELETE :SELECT :ADJUST Channel search AUTO CHANNEL MEMORY makes the TV look for all channels viewable in the set area.
19 Setting MTS/SAP stereo mode The TV/DVD has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The TV/DVD with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP).
20 :SELECT :ADJUST ENTER:SET EXIT :END Menu items List of menu items to help you with operations Basic adjustment settings AV MODE ................................................... Page 24 BRIGHTNESS ............................................ Page 22 CONTRAST .
21 Basic adjustment settings Labeling channels To create channel labels Select a channel you want to label. 1 Press TV MENU , then press ϵ / ϶ to select (OPTION). Press ϳ / ϴ to select “CH LABEL”, then press ϵ / ϶ . The CH LABEL menu will appear.
22 Basic adjustment settings PICTURE AV MODE SPORTS BRIGHTNESS 25 CONTRAST 50 COLOR 25 TINT 0 SHARPNESS 25 :SELECT :ADJUST Picture adjustments Adjusts the picture to your preference with the following picture settings.
23 Sound adjustments You can adjust the sound quality to your preference with the following settings. Basic adjustment settings Press ϵ / ϶ to adjust the item to the desired level. NO TE • For resetting all Audio adjustment items to the factory preset values, press ϳ / ϴ to select “RESET”, and then press ϵ / ϶ .
24 Selecting the digital audio language When two or more audio languages are included in a digital signal, you can select one of the audio languages. Press ϳ / ϴ to select your desired language, then press ENTER . Press ϳ / ϴ to select “AUDIO LANGUAGE”, and then press ϵ / ϶ .
25 Useful adjustment settings Press 0–3 to select each view mode directly while the View mode menu is still on the screen. • Each time VIEW MODE is pressed, VIEW MODE item toggles. • You can also select VIEW MODE item by pressing ϳ / ϴ . • You can sequentially select a view mode that has its own aspect ratio.
26 Closed captions and digital closed captions NO TE • Closed Caption might not appear according to the condition of the signal from the broadcasting station. Your TV/DVD is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV/DVD.
27 Caption setup This function allows you to adjust the closed caption screen appearance to suit your preference. Press ϳ / ϴ to select a specific adjustment item, then press ϵ / ϶ . The selectable parameter of each items will appear. Press ϳ / ϴ to select the desired parameter.
28 LOCKS V-CHIP OFF V-CHIP SET V-CHIP SET (DTV) NEW PASSWORD :SELECT :ADJUST Password setting for parental control Allows you to use a password to protect certain settings from being accidentally changed. IMPORTANT: Three conditions must be met to enable the V-Chip ① Password is registered.
29 Parental control (V-CHIP) NO TE V-CHIP might not function according to the condition of the signal from the broadcasting station. V-CHIP is an electronic filtering device built into your TV/DVD. This tool gives parents a great degree of control over broadcasts accessed by their children.
30 RATING SET G ON/ OFF PG OFF PG-13 OFF R OFF NC-17 OFF X OFF :SELECT :ADJUST Press EXIT to return to the normal screen. • See page 29 for setting details. Input the 4-digit password by using 0–9 , then press ENTER . The LOCKS menu displays. Press ϵ / ϶ to select (LOCKS).
31 Canadian rating systems • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming.
32 Input the 4-digit password by using 0–9 , then press ENTER . The LOCKS menu displays. Press ϵ / ϶ to select (LOCKS). Press ϳ / ϴ . The password entering menu displays. Press ϳ / ϴ to select “CAN ENG RATING”. Then press ϵ / ϶ to select the desired rating.
33 Other viewing options ENTER:RETURN SIGNAL METER CHANNEL (DIGITAL) 15.001 100 Signal meter In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the “SIGNAL METER” menu.
34 Connecting a PC (Personal computer) Viewing an image from a PC Use the INPUT6 (PC) terminals to connect a PC. • LC-26DV22U/LC-26DV22U-W : INPUT5. NO TE • The PC input terminals are DDC1/2B-compatible. • Refer to page 35 for a list of PC signals compatible with the System.
35 Selected Item Description BASS Press ϵ or ϶ to adjust the bass sound. TREBLE Press ϵ or ϶ to adjust the treble sound. BALANCE Press ϵ or ϶ to obtain an equal sound level from both speakers. SURROUND Press ϵ or ϶ to turn on or off the surround effect.
36 POWER indicator POWER Simple operations for watching a DVD. POWER (On/Standby) Turning on the power Press POWER on the TV/DVD, or POWER on the remote control. • POWER indicator (Green): The TV/DVD is on. (“PLEASE WAIT” will appear for a few seconds on the screen.
37 Playback procedure Place the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching its surface, align it with the guides, and place it in position. On the screen, “ ” changes to “Reading” and then playback will commence.
38 Special playback Fast Forward Playback Press FWD during normal playback. Each press of FWD will increase the speed of the search XX (x 2), XXX (x 4), XXXX (x 8), XX XXX (x 20). • To resume normal playback, press PLAY . • The above figure shown in parentheses indicates the average speed multiplier.
39 Press PLAY MODE during playback or stop mode. Press ENTER to select “Chapter” or “Title”. • The unit automatically starts repeat playback after finishing the current title or chapter. Play Mode Repeat : Off Press PLAY MODE again to make the screen disappear.
40 Changing angles When playing back a disc recorded with multi-angle facility, you can change the view angle. Press ANGLE during playback. The current angle will appear. 1/2 Press ANGLE repeatedly until the desired angle is selected. 2 NOTE • In case of JPEG-playback, the JPEG-image is rotated 90 degrees to the right.
41 Changing soundtrack language You can select the language when you play a multilingual disc. Press AUDIO during playback. The current soundtrack language will appear. 1/2 Eng Dolby Digital Press AUDIO repeatedly until the desired language is selected.
42 This TV/DVD can playback the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. Audio CD also can be played back. To produce the MP3/WMA/JPEG-data, you need a Windows-PC with CD-R/RW drive and a MP3/WMA/JPEG-encoding Software (not supplied).
43 MP3/WMA/JPEG and Audio CD operation Loading CD Load a disc on which MP3 or WMA files have been recorded in the disc slot. “Reading” will appear on the TV screen. Reading time will depend on the number of files on the disc. A file browser screen will appear on the TV screen.
44 MP3/WMA/JPEG and Audio CD operation JPEG playback In the file browser, press ϳ / ϴ to select the desired JPEG file. To display a thumbnail list, press DVD MENU . Press ϵ / ϶ / ϳ / ϴ to select the desired file. (To return to the file browser, press TOP MENU .
45 MP3/WMA/JPEG and Audio CD operation Repeat playback (CD) Random playback (CD) In the file browser, press ϳ / ϴ / ϵ / ϶ to select “Repeat” during stop mode. 1 Press ENTER repeatedly to select “Track” or “All”. 2 Press PLAY . • The unit automatically starts repeat playback after finishing the current track.
46 Function setup Menu items List of menu items to help you with operations Menu ........................................................... Page 47 Subtitle ....................................................... Page 47 Audio .......................
47 Function setup Setting the language You can select the language of the disc menu messages of DVDs. The same language can always be selected even if you replace the disc or turn the power off. Press SETUP and the SETUP screen displays. Press ϳ / ϴ to select (LANGUAGE), then press ϵ / ϶ or ENTER .
48 Setting the picture mode There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed.
49 Parental control setting Some discs are specified as not suitable for children. Playback of such discs can be restricted with this TV/DVD. Press SETUP and the SETUP screen displays. Press ϳ / ϴ to select (SETUP), then press ϵ / ϶ or ENTER . Press ϳ / ϴ to select “Parental”, then press ϶ or ENTER .
50 Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. Load a DVD disc. (See page 37.
51 Appendix Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see page 47). Language Name Code Language Name Code Language Na.
52 Removing the stand Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal. CA UTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching the stand • Before performing work make sure to turn off the TV.
53 Appendix Troubleshooting Cautions regarding use in high and low temperature environments • When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
54 Appendix Troubleshooting-DVD Problem Possible Solution • Playback doesn’t start. • No disc is inserted. (See page 37.) • The disc may be dirty. Clean up the disc. (See page 6.) • The TV/DVD cannot play CD-ROMs, etc. (See page 5.) • No picture.
55 Specifications Appendix • Typical time for power output decrease of about one-half assuming continuous use in a room with normal lighting, normal brightness and temperature at 77°F/25°C • As .
56 The password is NOTE • As a precautionary measure, make a note of your password above, cut it from this manual, and keep it in a safe place. . CLEARING THE PASSWORD If you forget the password, clear the password using the following procedure. Now the old password was cleared.
57 Model Specific Section Where to Obtain Service: From a Sharp Authorized Servicer located in the United States. T o find the location of the nearest Sharp Authorized Servicer , call Sharp toll free at 1-800-BE-SHARP . What to do to Obtain Service: Ship prepaid or carry in your Product to a Sharp Authorized Servicer .
58.
Dimensional drawings Unit: inch/(mm) 22 5 / 16 (567.5) 26 5 / 16 (663) 19 11 / 16 (500) 17 3 / 4 (451) 1 15 / 16 (49) 12 5 / 8 (320.5) 11 9 / 16 (293) 3 1 / 8 (79) 4 9 / 16 (116) 9 9 / 16 (243) 3 15 / 16 (100) 19 11 / 16 (500) 3 15 / 16 (100) 2 3 / 8 (60) 27 9 / 16 (700) 31 3 / 8 (797) 22 15 / 16 (583) 21 1 / 16 (534) 1 15 / 16 (49) 15 9 / 16 (394.
Printed in Thailand Imprimé en Thaïlande Impreso en T ailandia 9JDJ5Z20231E 07P06- TH-NO SHARP ELECTRONICS CORPORA TION SHARP CORPORA TION Sharp Plaza, Mahwah, New Jersey 07430-2135 J5Z20231E SH 07/.
Ein wichtiger Punkt beim Kauf des Geräts Sharp LC-32DV22U (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sharp LC-32DV22U noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sharp LC-32DV22U - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sharp LC-32DV22U reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sharp LC-32DV22U erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sharp LC-32DV22U besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sharp LC-32DV22U verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sharp LC-32DV22U. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sharp LC-32DV22U gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
