Benutzeranleitung / Produktwartung 14DLV75 des Produzenten Toshiba
Zur Seite of 54
14DL V75 OWNER’S MANUAL 2 14 21 31 34 43 Introduction Connections Basic setup Basic playback Advanced playback Function setup DIGITAL VIDEO 47 Others 23 TV operation ©2005 T oshiba Cor poration Before oper ating the unit, please read this manual thoroughly .
2 Introduction CAUTION: THIS DIGIT AL VIDEO PLA YER EMPLO YS A LASER SYSTEM. T O ENSURE PROPER USE OF THIS PRODUCT , PLEASE READ THIS OWNER'S MANU AL CAREFULL Y AND RET AIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONT A CT AN AUTHORIZED SER VICE LOCA TION.
3 Introduction 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RET AIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED W ARNINGS All warnings on the unit and in the operating instructions should be adhered to.
4 Introduction EXAMPLE OF ANTENNA GROUNDING AS PER THE NA TIONAL ELECTRICAL CODE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ANTENNA LEAD IN WIRE GROUNDING CONDUCT ORS (NEC SECTION 810-21) GROUND CLAMPS POWER SER VICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, P ART H) GROUND CLAMP ELECTRIC SER VICE EQUIPMENT 13.
5 Introduction 19. REPLA CEMENT P ARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
6 Introduction Notes on moisture condensation Moisture condensation damages the unit. Please read the follo wing carefully . Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day . Drops of water f orm on the outside of the glass.
7 Introduction Structure of disc contents Normally , D VD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks.
8 Introduction Playable discs This unit can play the following discs. • When you pla y an 8 cm disc, you need the adapter (not supplied). • Y ou cannot pla y discs other than those listed above . • Y ou cannot pla y discs of D VD-RAM, D VD-ROM, Photo CD , etc.
9 Introduction Contents Introduction IMPOR T ANT SAFEGU ARDS ............................ 2 Precautions ....................................................... 6 Notes on discs ................................................... 7 Contents ...........
10 Introduction To p Identification of controls See the page in for details. POWER button 21 31 STOP( ) button 32 EJECT ( ) button 23 VOLUME ( ) buttons PLAY ( ) button Remote sensor 31 POWER indicato.
11 Introduction Disc slot PHONES jack VIDEO IN/AUDIO IN (L/R) (LINE 2 IN) jacks DC input jack COAXIAL DIGITAL AUDIO OUT jack Antenna jack VIDEO IN/AUDIO IN (L/R) (LINE 1 IN) jacks S-VIDEO (LINE 1 IN) jack COMPONENT VIDEO IN (Y, P B /C B , P R /C R ) jacks Approx.
12 Introduction Remote control The instructions in this manual describe the function on the remote control. See the page in for details. *DVD MENU button Use the DVD MENU button to display the menu included on many DVD video discs. T o operate a menu, f ollow the instructions in “ DVD menu.
13 Introduction Replace the compartment cov er . Install two “ R03/AAA ” batteries (supplied), paying attention to the polarity indicated in the battery compar tment. Open the battery compar tment cover in the direction of the arrow . 1 23 • Aim the remote control at the remote sensor and press control buttons to operate.
14 Connections 75 ohm coaxial cable (not supplied) 300-75 ohm matching transformer (supplied) 300-75 ohm matching transformer (supplied) UHF 300 ohm twin-lead wire (not supplied) VHF 300 ohm twin-lead.
15 Connections For basic cable service not requiring a converter/descrambler box, connect the Cable TV 75 ohm coaxial cable directly to the Antenna jack on the back of the TV/DVD.
16 Connections To playback from the VCR, connect the VCR to the TV/DVD as shown. Select the “ LINE2 ” by pressing INPUT SELECT repeatedly. You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes. 1. Connect a TV Game to the TV/DVD.
17 Connections INPUT SELECT GAME Connecting to an optional equipment with S-video output If you connect a VCR with an S-VIDEO cable to the S-VIDEO IN jack on the rear lower left of the TV/DVD, you must also connect the audio cables to the AUDIO IN jacks on the rear lower left of the TV/DVD (LINE 1 IN).
18 Connections : Front speaker : Rear speaker : Sub woofer : Center speaker : Signal flow Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home .
19 Connections MPEG2 sound Y ou can enjoy motion picture and liv e concer t D VD video discs encoded via the MPEG2 recording system with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor .
20 Connections 2 3 1 T O USE A C PO WER 1. Connect the A C cord to the A C adapter . 2. Connect the AC adapter plug into the TV/D VD ’ s DC input jack. 3. Connect the A C cord into a wall outlet. Notes: • Make sure to insert the plug of each cord securely .
21 Basic setup Notes: • If the unit does not operate properl y , or No key operation (by the unit and/or the remote contr ol): Static electricity , etc., may aff ect the TV/D VD ’ s operation. In such case, disconnect the AC cord once , then connect it again.
22 / / / CH +/ – Press or to select “ TV/CABLE ” . 1 2 Press MENU in the TV mode, then press or to select option. Press MENU repeatedly until the menu screen is cleared.
23 TV operation TV operation Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases.
24 TV operation ■ CHANNEL UP/DOWN Press and release CH + or – . The channel automati- cally stops at the next channel set into memory . For proper operation, before selecting channels, they should be set into the memor y . See page 22 “ To memorize channels ” .
25 TV operation Closed captions Captions: This closed caption mode will displa y te xt on the screen in English or another language (depending on the setting of the closed captions CH 1/2). Generally , closed captions in English are transmitted on captions channel 1 and closed captions in other lan- guages are transmitted on captions channel 2.
26 TV operation T o register passw or d Notes: • If you f orget the password, you cannot set the V -Chip. • T o av oid f orgetting the pass word, write it down and keep in the safe place. Press or to select “ PASSWORD ” . 1 2 Press MENU, then press or to select option.
27 TV operation Press or to select “ MOVIE RATING ” . 1 3 Repeat steps 1 ~ 3 in “ T o register passwor d ” as left page, then press or to select “ V- CHIP SET ” , then press . Press or to select desired rating. After setting, press ENTER. 4 Press or to select “ V-CHIP ” .
28 TV operation 4 Press or to select the desired picture mode, then press ENTER. 3 PICTURE PREFERENCE ST ANDARD SPORTS MOVIE MEMORY // ENTER / MENU After your desired setting press MENU repeatedly until the menu screen is cleared. Press or to select “ PICTURE ” , then press .
29 TV operation Selecting the color temperature 4 Press or to select the desired color mode, then press ENTER. 3 After your desired setting press MENU repeatedly until the menu screen is cleared. Press or to select “ COLOR TEMPERA TURE ” , then press .
30 TV operation Sound control adjustment/ Stereo and Second A udio Program (SAP) Sound controls are factory preset but you can adjust them individually as follows: The TV/DVD is equipped with a feature known as multi-channel TV sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound.
31 Basic playback No Disc Reading Press ST OP to end playbac k. ■ Resuming facility • The unit records the stopped point, depending on the disc. “ ” appears on the screen. Press PLA Y to resume playbac k (from the scene point). • If you press ST OP again or un- load the disc ( “ ■ ” appears on the screen.
32 Basic playback T o pause playback (still mode) Press P AUSE during pla yback. T o resume nor mal pla yback, press PLA Y . • The sound is muted during still mode. T o stop playback Press ST OP . T o remove the disc Press EJECT . Remove the disc after the disc comes out.
33 Basic playback Playing frame by frame Playing in fast reverse or fast forward directions Press REV or FWD during playback. REV : Fast reverse playback FWD : Fast forward playback Each time you press REV or FWD button, the playback speed changes. T o resume normal playback Press PLA Y .
34 Advanced playback Press / / / to view a different part of the frame. You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction. In the zoom mode press ZOOM repeatedly to return to a 1:1 view ( Off). Zooming 1 2 Press ZOOM during playback.
35 Advanced playback [Audio CD, Video CD] Press to select “ Repeat ” . Press / or ENTER once or twice to select “ Track ” or “ All ” . The unit automatically starts repeat playback after finish- ing the current track. • If you set the repeat mode during stop mode, press PLA Y to star t Repeat pla yback.
36 Advanced playback Program playback/Random playbac k You can arrange the playback order of tracks or files on the disc. And also the unit selects tracks or files at random and playback them. These feature works for Audio CD, Video CD and MP3/WMA/JPEG CD.
37 Advanced playback 1/9 Changing angles Title selection DVD menu Press ANGLE during playback. The current angle will appear. When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. 1 Press ANGLE repeatedly until the desired angle is selected.
38 Advanced playback 1 2 Press AUDIO during playback. The current soundtrack language will appear. Press A UDIO repeatedly until the desired lan- guage is selected. • The on screen display will disappear after a few seconds. Changing soundtrack language/ Subtitles You can select the language when you play a multilingual disc.
39 Advanced playback A UDIO Karaok e playback/Disc status/ T o turn of f the PBC 1 RECALL ENTER With each press of RECALL, the status of the disc will appear on the screen and change as follows. DVD T o make status displa y disappear , press RECALL again.
40 Advanced playback MP3/WMA/JPEG CD operation This unit can play back the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. To produce the MP3/WMA/JPEG-data, you need a Windows-PC with CD-R/RW drive and a MP3/WMA/JPEG-encoding Software (not supplied).
41 Advanced playback ENTER ST OP PLA Y 0 – 9 T OP MENU MP3/WMA CD playback CD Notes: • During MP3/WMA/JPEG playbac k, you cannot use JUMP , A- B Repeat functions. • Y ou can use Repeat (T rack or All), Random functions and Program playback for MP3/WMA/JPEG CD playback (see pages 35 and 36).
42 Advanced playback ANGLE D VD MENU You can select your desired JPEG file on the file menu and picture menu. The selected JPEG file is automatically adjusted to the TV screen. (When the aspect ratio of the JPEG file is different to the TV screen, the black bar will appear at the top and bottom, or the both sides of the TV screen.
43 Function setup Section Option Menu Subtitle Audio Tv Screen Display JPEG Interval Select Files DRC Password Parental OSD Language Details T o select the language of “ Menu ” , “ Subtitle ” and “ Audio ” if more than one languages are recorded on the disc.
44 Function setup Setting details Menu, Subtitle, Audio You can select the language of “ Menu ” , “ Subtitle ” and “ Audio ” if more than one languages are recorded onto the disc. English, Francais, Espanol: The selected language will be heard or seen.
45 Function setup Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. 1) Press or to select “P arental”, then press or until the level y ou require appears. • Lev el Off: The parental control setting does not function.
46 Function setup Load a DVD disc. If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the “ Reading ” screen will change, depending on which disc is played. If you select “ YES ” with the ENTER key, “ Your disc exceeds the parental control level#.
47 Others Language code list Enter the appropriate code number for the initial settings “ Menu ” , “ Subtitle ” and/or “ Audio ” 44 . Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 .
48 Others SYMPTOMS POSSIBLE SOLUTIONS • Make sure the connection of the AC adapter and AC cord. • Try another AC outlet. • Unplug unit, then plug it back in. Poor reception on some channels. Horizontal or diagonal bars on screen. Poor sound or No sound.
49 Others Playback does not start when the title is selected. • Check the RATING LEVEL setup. Audio soundtrack and/or subtitle language is not changed when you play back a DVD. • Multilingual language is not recorded on the DVD disc. No subtitle. • Some discs have no subtitles.
50 Others Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results.
51 Others Power supply A C 120V 60Hz (with supplied AC adapter) P ower consumption Operation: 62 W , Stand by: 1 W (with supplied AC adapter) Weight 12.
52 Limited United States W arranty LCD TV/D VD Combination — Repair Warranty T oshiba Amer ica Consumer Products, L.L.C. ( “ TA C P ” ) makes the following limited warranties to original consumers in the United States .
53 Others How to Obtain W arranty Services If, after following all of the operating instructions in this manual and checking the section “T roub leshooting”, you find that service is needed: (1) F.
54 Printed in Thailand ColorStream ® is registered trademark of T oshiba America Consumer Products, L.L.C. J5N00621A [E] (P52-Back) 14/01/2005, 7:43 PM 54.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba 14DLV75 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba 14DLV75 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba 14DLV75 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba 14DLV75 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba 14DLV75 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba 14DLV75 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba 14DLV75 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba 14DLV75. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba 14DLV75 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
