Benutzeranleitung / Produktwartung CD-CH1500 des Produzenten Sharp
Zur Seite of 32
Thank you for purchasing this SHARP product. T o obtain the best performance from this product, please read this manual carefully . It will guide you in operating your SHARP product. CD-CH1500 Audio T ower System consisting of CD-CH1500 (main unit) and CP-RW5500 (speaker system).
2 Special Notes Caution - use of controls or adjustments or performance of proce- dures other than those specified herein may result in hazardous ra- diation exposure. W ARNING: T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
3 Important Safeguards Important Instruction – Important Safeguards – CAUTION All the safety and operating instructions should be read before the appliance is operated, and should be retained for future reference. Electrical energy can perform many useful functions.
4 Contents ■ General Information Page Accessories ............................................................................................. 4 Precautions ...........................................................................................
5 Precautions ■ General ● Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 8" (20 cm) of free space along the sides, top and back of the unit. 8" (20 cm) 8" (20 cm) 8" (20 cm) 8" (20 cm) ● Use the unit on a firm, level surface free from vi- bration.
6 Controls and Indicators ■ Front panel Reference page 0 1. Cassette Compartment ................................................................... 22 0 2. V olume Up/Demo Button .......................................................... 13, 14 0 3.
7 ■ Multi-function LCD display 0 1. Function Indicator 0 2. Extra Bass Indicator 0 3. Random Play Indicator 0 4. Memory Indicator 0 5. T otal Indicator 0 6. Remain Indicator 0 7. Timer Play Indicator 0 8. CD Indicators 0 9. Cassette Indicator 10. Sleep Indicator 11 .
8 Controls and Indicators (continued) ■ Remote control Reference page 0 1. Remote Control T ransmitter .............................................................. 12 0 2. T uner (Band) Button 0 3. CD Button 0 4. Auxiliary Button 0 5. CD Direct Play Buttons 0 6.
9 ■ Speaker system Power amplifier Mid-to-high range (200 Hz - 20 kHz) Ultra-low range (60 Hz - 200 Hz) Pre-amplifier Pre-amplifier Power amplifier L-ch Tweeter Woofer Subwoofer Speaker grilles are removable: Make sure nothing comes into contact with the speaker diaphragms when you remove the speaker grilles.
10 Preparation for Use – System Connections – System Connections FM antenna Right speaker Left speaker AM loop antenna AC outlet ( AC 120 V , 60 Hz ) (Not supplied) VCR, DVD, etc. (Not supplied) T ransport screw ■ Listening to the playback sounds from VCR, DVD, etc.
11 Preparation for Use – System Connections – ■ FM/AM loop antenna connection Connect the FM/AM loop antenna to the FM/AM loop antenna jack. Position the FM antenna wire and rotate the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, or attach it to a stand or a wall.
12 Preparation for Use – Remote Control – ■ Battery installation Use 2 “ AA ” size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included. 1. Remove the battery cover . 2. Insert the batteries according to the direction indicated in the bat- tery compartment.
13 Basic Operation – General Control – General Control ■ Display brightness (2 levels) Y ou can switch the display brightness by pressing the DIMMER button. DIMMER ON DIMMER OFF ■ Demonstration mode The first time the unit is plugged, the unit will enter the demonstration mode.
14 Sound Control ■ V olume control Press the VOLUME W button to increase the volume and the VOLUME X button for decreasing. ■ Bass control When the X-BASS button is pressed, the unit will enter the extra bass mode which emphasizes the bass frequencies, and “X-BASS” will appear .
15 Basic Operation – Setting the Clock – T o confirm the time display: [When the unit is in the stand-by mode] Press the DISPLA Y button on the remote control. The time display will appear for about 3 seconds. [When the power is on] Press the MENU button.
16 Listening to a CD (CDs) ■ T o play discs in turn (from Disc 1 to Disc 6) 1 Press the POWER button to turn the power on. 2 Press the CD button. 3 Press the DISC 1 7 7 7 7 7 button to open the disc tray 1. 4 Place a CD on the disc tray 1, label side up.
17 7 Press the 06 06 06 06 06 button to start playback. ● Playback will begin from track 1 on the DISC 1. After that disc finishes playing, the next disc will automatically start playback. ● When there is no CD in one of the disc tray 1 - 6 positions, that position will be skipped and the next CD will be played.
18 Advanced CD Playback – T o specify a disc to Play / Switching the time display / Repeat or Random Play – Y ou can select one of the CD playback mode; “Repeat play”, “Random play” and “Nor- mal play”. 1 Press the PLA Y MODE button repeatedly to select the playback mode.
19 Advanced CD Playback – Programmed Play – Up to 32 tracks can be programmed. 1 While in the stop mode, press the MEMOR Y button to enter the programming save mode. 2 Press one of the DISC 1 - DISC 6 buttons to select the desired disc. 3 T urn the jog dial to select the desired track.
20 Radio – Listening to the Radio – Listening to the Radio 1 Press the POWER button to turn the power on. 2 Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). 3 Press the TUNING ( X X X X X or W W W W W ) button to tune in to the desired sta- tion.
21 Radio – Listening to the memorized station – Listening to the memorized station ■ Memorizing a station Y ou can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 Perform steps 1 - 3 in the “Listening to the Radio” section on page 20.
22 T ape Playback – Listening to a Cassette T ape – Listening to a Cassette T ape 1 Press the POWER button to turn the power on. 2 Press the T APE button. 3 Open the cassette door by pushing the area marked “PUSH EJECT 7 7 7 7 7 ”. PUSH EJECT 7 4 Load a cassette into the compartment with side A facing you.
23 Recording from a CD Recording – Recording from a CD – ● When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. ● SHARP is not liable for damage or loss of your recording arising from malfunction of this unit.
24 Recording – Recording from the Radio – Recording from the Radio 1 T une in to the desired station. (See page 20.) 2 Load a cassette into the compartment with side A facing you. 3 Press the REVERSE MODE button to choose one side or both sides. 4 Press the REC P AUSE I6 I6 I6 I6 I6 button repeatedly to switch to the side you record on.
25 Continued to the next page Advanced Features – Timer and Sleep Operation – ■ Timer playback or T imer recording Before setting the timer: While the power is in the stand-by mode, press the DISPLA Y button on the remote control to check that the clock is on time.
26 6 T urn the jog dial to specify the minute and within 10 seconds, press the ENTER button. 7 T urn the jog dial to specify the hour to stop and within 10 sec- onds, press the ENTER button. 8 T urn the jog dial to specify the minute and within 10 seconds, press the ENTER button.
27 T imer and Sleep Operation (Continued) ■ Sleep operation Advanced Features – Timer and Sleep Operation – ■ T o use timer and sleep operation together Example: T o fall asleep and wake to the same radio station Y ou can play back the same source only (the function cannot be switched).
28 Enhancing Y our Stereo System T o the line output jack Red White Red White RCA cord The connection cord is not included. Purchase a commercially available cord as shown below . VCR, DVD, etc. Advanced Features – Enhancing Y our Stereo System – ■ Listening to the playback sounds from VCR, DVD, etc.
29 T roubleshooting Chart Many potential “problems” can be resolved by the owner without calling a service tech- nician. If something is wrong with this product, check the following before calling your autho- rized SHARP dealer or service center .
30 Maintenance ■ Cleaning the tape-handling parts ● Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. ● When cleaning the heads, pinch rollers, etc.
31 References – Specifications – Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
SHARP ELECTRONICS CORPORA TION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORA TION 0005 CONSUMER LIMITED W ARRANTY SHARP ELECTRONICS CORPORA TION warrants to the first consumer purchaser tha.
Ein wichtiger Punkt beim Kauf des Geräts Sharp CD-CH1500 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sharp CD-CH1500 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sharp CD-CH1500 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sharp CD-CH1500 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sharp CD-CH1500 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sharp CD-CH1500 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sharp CD-CH1500 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sharp CD-CH1500. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sharp CD-CH1500 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
