Benutzeranleitung / Produktwartung SK 5212-II des Produzenten Sennheiser
Zur Seite of 34
SK 5212-II Instruction manual.
Contents 1 Contents Important safety instructions ................ ..................... ................ .................... .................... ..................... 2 The SK 5212-II bodypack transmitter .. ..................... ................ .
Important safety instructions 2 Important safety instructions • Read this instruction manual. • Keep this instruction manual. Always in clud e this instruction manual when passing the product on to third parties. • Heed all warnings and foll ow all instructions in this ins truction manual.
The SK 5212-II bodypack transmitter 3 The SK 5212-II bodypack transmitter The SK 5212-II is a professional bo dypack transmitter that is easy to use and is easi ly adaptable to a wide va riety of appli cations.
The SK 5212-II bodypack tra nsmitter 4 The frequency bank system The transmitter is available in five UHF freq u e n c y r a n g e s w i t h u p t o 1 8 4 M H z s w i t c h i n g bandwidth: The transm.
Delivery includes 5 Suitable receivers • EM 1046 system • EM 3532, EM 3031, EM 3032 • EK 3041, EK 3241 • EM 3731, EM 3732, EM 3732 COM • EM 3731-II, EM 3732-II, EM 3732 COM-II Delivery includes Delivery of the body pack transmitter includes: 1 SK 5212-II bodypack tra nsmitter 1 AA size battery, 1.
Product overview 6 Product overview Overview of the SK 5212-II bodypack transm itter Microphone input Red LED for operation and battery status indication ( ON / LOW BATT / PEAK ) Antenna s.
Product overview 7 Overview of the displays Display backlighting When the lock mode is deactivated, the LC di splay remains backlit for approx. 20 seconds after pressing a button.
Putting the bodypack transmitter int o operation 8 Putting the bodypack transmitter into operation Inserting and changing the battery For powering the transmitter, use a 1.5 V AA size battery. Connecting the microphone The transmitter is designed for use with Sennhe iser lavalier micropho nes and headmics.
Putting the bodypack transmitter into operation 9 Connecting the antenna The transmitter is supplied with plug-on antennas: Choose t h e antenna that matches the frequency range used. Attaching the transmitter to cloth ing Connect the antenna to t he antenna socket of the transmitter.
Using the bo dypack tr ansmit ter 10 Using the bodypack transmitter Switching the transmitter on/off Open the battery compartment. T o switch the transmitter on: Briefly press the ON / OFF button .
Using the bodypack transmitter 11 Doing a frequency check The transmitter has a frequency check mode that prevents the transmitter transmitting on an unwanted frequency after switch-on. T o change the transmission freq uency, proceed as follows: Release the ON / OFF button .
Using the bo dypack tr ansmit ter 12 Deactivating the autolock function temporarily T o make changes to the settings via the op eratin g menu, you can temporarily deactiva te the lock mode. After you have exited the operati ng menu, the lock mode is automatically activated after 10 seconds.
Using operating menu 13 Using operating menu The buttons Button Mode Function of the button ON / OFF Switched off • Briefly pressing the button: Switches the transmitter on • Keeping the button pr.
Using operati ng menu 14 Overview of the operating menu : Menu Function of the menu “ CHAN ” Selects a channel “ TUNE ” Set s transmission frequencie s for the frequency bank “ VA R ” (var.
Using operating menu 15 W orking with the operating menu The operating menu has three m odes: •D i s p l a y m o d e : In display mode, you can display the current me nu settings one after the oth er – even when the lock mode is activated.
Using operati ng menu 16 After switch- on Af ter switch-on, the standard display is shown on the LC display panel. Depending on t he setting, the transmission frequency, the channel number or the name of the transmitter is displayed.
Using operating menu 17 Adjusting a setting Use the multi-function switch to adjust the setting of the selected menu. By briefly sliding the multi-fun ction switch to the position (UP) or (DOWN), the display jumps either forwards or ba ckwards to the next setting.
Using operati ng menu 18 Overview of the menus Deactivate the lock mode befo re adjusting the settings ( see “Deactivating the autolock function temporarily” on page 12 ). P ressing the ON / OFF button will cancel your en try (ESC function) and return you to the display mode.
Display mode Selection mode Setting mode CH SET SET SET SET SET SET Adjusting the low-cut frequency Current low-cut frequency setting FLA T Hz 120 Hz Selecting the standard display NAME VIEW FREQ Current standard display / : FREQ, NAME, CHAN Loading the factory-preset default settings RST .
Adjustment tips fo r the operating menu 20 Adjustment tips for the operating menu Selecting a channel – “ CHAN “ Via the “ CHAN ” menu, you can switch between the channels in the frequency b anks “ FIX ” and “ VA R ”. The RF signal is deactivat ed while this adjustment is being made.
Adjustment tips for the operating menu 21 The frequencies are tuneable in 5-kHz steps within a switching bandwidth of 184 MHz max. There are two options for setti ng the freque ncies: • You can set .
Adjustment tips fo r the operating menu 22 Entering a name – “ NAME ” Via the “ NAME ” menu, you can enter a freely selectable n ame for the transmitter.
Adjustment tips for the operating menu 23 Adjusting the bass roll -off frequency – “ LOW CUT ” To reduce unwanted low-frequency noise such as wind and hand ling nois e, you can activate a low-cut filter. The low-cut frequency is 120 Hz. If you do not want to redu ce low-frequency signal portions, select the setting “ FL A T ”.
Adjustment tips fo r the operating menu 24 Activating/deactivating the automatic lock mode – “ LOCK ” The transmitter has an autolock funct ion (aut omatic lock mode) that can be activated or deactivated via the “ LOCK ” menu.
Cleaning the bodypack transmitter 25 Exiting the operating menu – “ EXIT ” Via the “ EXIT ” menu, you can exit the operating me nu and return to the standard display.
If a problem occurs ... 26 If a problem occurs ... If a problem occurs that is not li sted in the ab ove table or if the proble m cannot be solved with the proposed solutions, please contact your local Sennheiser partner for assistance. T o find a Sennheiser partner in your country, search at www.
Accessories 27 Accessories ………… MKE 1 clip-on micropho ne, omni-directional, available in different versions ………… MKE 2 Gold clip-on microp hone, omni-direction al, available in differ.
Specifications 28 Specifications Modulation wideband FM Frequency ranges range L: 470 to 638 MHz range N: 614 to 798 MHz range N-US: 614.075 to 697.925 MHz ra ng e N-GB: 606 to 790 MHz range P: 776 to.
Specifications 29 Operating conditions Storage and transport conditions In compliance with Power consumption (without LC display illumination) PWR.LO: approx. 150 mA (10 mW) at 1.5 V PWR.HI: approx. 220 mA (50 mW) at 1.5 V PWR.LoI: approx. 220 mA (10 mW) at 1.
Specifications 30 Approved by Pin assignment of microphone socket Audio sensitivity The transmitter’s audio sensitivity can be adjusted over a range of 70 dB (+40 dB to –30 dB) in steps of 1 dB. The diagram below shows the sensit ivity range of the SK 5212-II in comparison to the earlier product generations SK 50 and SK 5012.
Manufacturer Declarations 31 Manufacturer Declarations W arranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner.
Manufacturer Declaration s 32 • Reorient or relocate the receiving antenna . • Increase t he separat i on between the equipment and receiver. • Connect the equipmen t into an outlet on a circui t different from that to which the receiver is conne cted.
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany, Publ. 11 /10, 5 42646 /A01.
Ein wichtiger Punkt beim Kauf des Geräts Sennheiser SK 5212-II (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sennheiser SK 5212-II noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sennheiser SK 5212-II - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sennheiser SK 5212-II reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sennheiser SK 5212-II erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sennheiser SK 5212-II besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sennheiser SK 5212-II verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sennheiser SK 5212-II. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sennheiser SK 5212-II gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
