Benutzeranleitung / Produktwartung FT-902S50 des Produzenten Sennheiser
Zur Seite of 40
INSTRUCTION FOR USE EM 203.
CONTENTS 1 TECHNICAL OVERVIEW 1.1 Computer Control 1.2 Diversity 1.3 HIDYN plus ® noise reduction system 1.4 Block diagrams 2 POSSIBLE TRANSMITTER/RECEIVER COMBINATIONS 2.1 EM 203 receiver/SK 2012 TV(HiDyn plus ® ) and SKM 4031 HiDyn plus ® 2.2 EM 203 receiver/SK 50/250 UHF and SKM 5000 (HiDyn plus ® ) 2.
Introduction The wireless Mikroport multi-channel sound transmission system EM 1046 is a transmitter/receiver system in a modular design. It offers comfortable handling and can be relied on for dependable service.
T echnical overview 1 Computer control 1.1 Diversity 1.2 HiDyn plus ® noise reduction 1.3 Block diagrams 1.4.
Every single EM 1046 RX receiver module has an in-built micro- processor for the RF section, the operating elements and all indicators. It serves to control the following components or parameters: •.
Diversity 1.2 Every EM 1046 RX receiver module operates on true diversity. An antenna splitter, integrated into the chassis, serves to route the antenna signals from both antennas to the three receiver modules.
HiDyn plus ® 1.3 »HIDYN plus ® « NOISE REDUCTION SYSTEM The »HIDYN plus ® « noise reduction system serves to reduce the effects of RF interference fields. It increases the signal-to-noise ratio and gets close to about 110 dB for peak modulation.
Block diagram EM 203 1.4.
Possible transmitter/ 2 receiver combinations EM 203 receiver/ 2.1 SK 2012 TV (HiDyn plus ® ) and SKM 4031 TV-HiDyn plus ® T ransmitters EM 203 receiver/ 2.
2.1 EM 203 receiver/ SK 2012 TV (HiDyn plus ® ) and SKM 4031 TV -HiDyn plus ® AB 1036 TV 2 GZA 1036 TV 450 - 800 MHz or 2 GZA 1036-9 140 -960 MHz SKM 4031 TV-HiDyn plus ® SK 2012 TV (HiDyn plus ® .
EM 1046/ SK 50 UHF / SK 250 UHF and SKM 5000 2.2 2 GZA 1036 TV 450 - 800 MHz or 2 GZA 1036-9 140 -960 MHz SK 50 UHF / SK 250 UHF AB 1036 TV MKE 10-4 MKE 2-4 MKE 102-4 SKM 5000 EM 203 receiver.
EM 203 receiver/ 2.3 SER 20 transceiver SER 20 transceiver with HiDyn plus © 2 GZA 1036 TV 450 - 800 MHz or 2 GZA 1036-9 140 -960 MHz Retrofitted SER 20 transceivers (change from HIDYN © to HIDYN plus © ) can be used in conjunction with EM 203 receivers.
MANIPULA TION FUNCTION DISPLA Y (RX) 13 EM 203, Publ. 10/94 engl Putting the EM 203 receiver 3 to work M ains connection 3.1 A ntenna connection 3.2 A F connection 3.
Power is supplied by a plug-in power supply unit. The power module is available as a 110, 230 or 240 V AC model. The unit can easily be adapted to changing power requirements by replacing the power module. Connection of the plug-in power supply unit is via socket P at the back panel of the EM 203.
MANIPULA TION FUNCTION DISPLA Y (RX) 15 EM 203, Publ. 10/94 engl This is how the channel module indicates that it is ready for operation (after power-up).
A vailable modules 4 EM 1046 RX 4.1 receiver module Monitor 4.2.
EM 1046 RX receiver module 4.1 Adjustment 4.1.1 Receiver frequencies 4.1.2 Squelch 4.1.3 Selection 4.1.4 RF Signal level/deviation/ battery condition Display 4.1.5 T ext/frequency/battery condition Entry of brief texts 4.1.6 System configurations and specifications 4.
OPERA TING ELEMENTS ON THE EM 1046 RX MODULE RACK CONNECTOR (invisible) 8 DIGIT ALPHANUMERIC LED DISPLAY KEYS TO CONTROL THE MENU AND TO PROGRAM THE MODULE INDICATOR FOR REMOTE MONITORING MONITOR KEY .
MANIPULA TION FUNCTION DISPLA Y (RX) 19 EM 203, Publ. 10/94 engl Adjustment 4.1.1 Y N SET ESC MENU AB DIVERSITY Depress an arbitrary menu key on the EM 1046 RX receiver module: Y N SET ESC The receiver switches to the menu mode. It is now ready for data entry.
MANIPULA TION FUNCTION DISPLA Y (RX) 20 EM 203, Publ. 10/94 engl Receiver frequencies 4.1.2 Y N SET ESC MENU AB DIVERSITY SET 24 MHz maximal 24 MHz maximal 24 MHz maximal Chose option "RX-Freq." ( chapter 4.1.1 ). Depress to allow the receiver frequencies to be selected.
MANIPULA TION FUNCTION DISPLA Y (RX) 21 EM 203, Publ. 10/94 engl Use keys to select a receiver frequency as per pre-programmed parameters. • Keeping the key depressed acdelerates selection. Depress to store new frequency. Y N • Freely selectable receiver frequencies can easily be adjusted in a 5 kHz grid.
MANIPULA TION FUNCTION DISPLA Y (RX) 22 EM 203, Publ. 10/94 engl Depress to store data or depress or to stop storage. Y Y = YES ! The new frequency is stored in the memory. The EM 1046 RX receiver module switches to the new frequency selected. For a short time the display indicates The program returns to the selection mode.
MANIPULA TION FUNCTION DISPLA Y (RX) 23 EM 203, Publ. 10/94 engl Squelch 4.1.3 Choose option „Squelch“ (see ch. 4.1.1 ) Depress to allow the squelch threshold to be set. Use keys to select the squelch threshold. • Keeping the key depressed accelerates adjustment.
MANIPULA TION FUNCTION DISPLA Y (RX) 24 EM 203, Publ. 10/94 engl Selection 4.1.4 RF signal level/deviation/batery condition SET Y N It is useful to have permanent settings to facilitate day-to-day applications.
MANIPULA TION FUNCTION DISPLA Y (RX) 25 EM 203, Publ. 10/94 engl Use or to select the parameters to be indicated. Depress and subsequently to store the latest setting or depress to stop storage.
MANIPULA TION FUNCTION DISPLA Y (RX) 26 EM 203, Publ. 10/94 engl Use or to select the parameters to be indicated. Depress and subsequently to store the latest setting or depress to stop storage. Y = YES ! Y SET N = NO ! N CONTINUED FROM PAGE 25, CH. 4.
MANIPULA TION FUNCTION DISPLA Y (RX) 27 EM 203, Publ. 10/94 engl Y N SET N = NO ! N CONTINUED FROM PAGE 26, CH. 4.1.4 SET ESC MENU AB DIVERSITY Y N DEV A DEV B DEVIATION CHANNELS A/B (DIVERSITY) to be indicated: The left-hand bargraph display indicates DEV (= deviation) in % for diversity channel A.
MANIPULA TION FUNCTION DISPLA Y (RX) 28 EM 203, Publ. 10/94 engl Use or to select the parameters to be indicated. Depress and subsequently to store the latest setting or depress to stop storage. Y N Y = YES ! Y SET N = NO ! N CONTINUED FROM PAGE 27, CH.
MANIPULA TION FUNCTION DISPLA Y (RX) 29 EM 203, Publ. 10/94 engl Y N SET ESC MENU AB DIVERSITY Choose option "DispConf" (see ch. 4.1.1 ). Depress to allow the display to be set. Use to select the parameters to be indicated. Depress and subsequently to store the latest setting or depress key to stop storage.
MANIPULA TION FUNCTION DISPLA Y (RX) 30 EM 203, Publ. 10/94 engl Entry of brief texts 4.1.6 SET Y N Y N SET ESC MENU AB DIVERSITY The display indicates the latest text entered.
MANIPULA TION FUNCTION DISPLA Y (RX) 31 EM 203, Publ. 10/94 engl System configurations 4.1.7 and identification data Y N SET ESC MENU AB DIVERSITY The receiver specifications are stored in every singl.
MANIPULA TION FUNCTION DISPLA Y (RX) 32 EM 203, Publ. 10/94 engl Remote monitoring of 4.1.7 transmitter battery Y N SET ESC MENU AB DIVERSITY Choose the option to indicate the condition of the transmitter battery (see ch. 4.1.1 ). Depress to select the display mode for the indication of the battery condition.
MANIPULA TION FUNCTION DISPLA Y (RX) 33 EM 203, Publ. 10/94 engl CONTINTUED FROM PAGE 32, CH. 4.1.8 CAPACITY OF RECHARGEABLE BATTERIES: Capacity of 100 % Capacity of about 80 % Capacity of about 60 % Capacity of about 40 % Capacity of about 20 %, the display starts blinking.
MANIPULA TION FUNCTION DISPLA Y (RX) 34 EM 203, Publ. 10/94 engl Monitoring of audio signals 4.1.8 It is only possible to monitor the active channel, i. e. one channel at a time. The LED on the monitor key lights up if the key is depressed, i. e. monitoring is possible.
MANIPULA TION FUNCTION DISPLA Y (RX) 35 EM 203, Publ. 10/94 engl Stand-by 4.1.9 Y N Y N SET ESC MENU AB DIVERSITY Y N In some situations it is useful not only to mute the audio signal at the mixing console but also to switch off the complete RF section of the EM 1046 receiver module.
Monitor 4.2 LED indicators 4.2.1 Monitor headphones 4.2.2 OPERA TING ELEMENTS MONITORING VOLUME 20 dB GAIN FOR MONITORING ON/OFF SWITCH POWER INDICATORS BOOSTER INDICATORS (INCL. OVERLOAD) REMOTE SWITCH (REMOTE CONTROL) WITHOUT FUNCTION! MONITOR HEADPHONES (STEREO, 6,3 mm Ø MIN.
MANIPULA TION FUNCTION DISPLA Y (RX) 37 EM 203, Publ. 10/94 engl LED indicators 4.2.1 REMOTE + 20 dB + 20 dBu + 12 V - 12 V + 5 V DC - A DC - B OL - A OL- B POWER LED DISPLA Y The three upper LEDs lig.
MANIPULA TION FUNCTION DISPLA Y (RX) 38 EM 203, Publ. 10/94 engl Monitor headphones 4.2.2 REMOTE + 20 dB + 20 dBu + 12 V - 12 V + 5 V DC - A DC - B OL - A OL- B POWER The monitor socket is suited to connect mono or stereo headphones with an impedance of about 50 to 300 Ω .
T echnical data 5 Frequency range 450 - 790 MHz with RX module item no. 03246 760 - 960 MHz with RX module item no. 03247 Bandwidth 24 MHz Channel spacing, min. 300 kHz Channel grid, min. 5 kHz 1st oscillator frequency (1st LO) 71 MHz below / above Fe 1st intermediate frequency (1st IF) 71 MHz 2nd oscillator frequency (2nd LO) 81.
SENNHEISER ELECTRONIC KG 30900 Wedemark Subject to alterations. Errors and omissions excepted! Publ.: 10/94 51104.
Ein wichtiger Punkt beim Kauf des Geräts Sennheiser FT-902S50 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sennheiser FT-902S50 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sennheiser FT-902S50 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sennheiser FT-902S50 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sennheiser FT-902S50 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sennheiser FT-902S50 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sennheiser FT-902S50 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sennheiser FT-902S50. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sennheiser FT-902S50 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
