Benutzeranleitung / Produktwartung PATL50707.0 des Produzenten ProForm
Zur Seite of 28
USER'S MANUAL Model No. PATL50707.0 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference.
T ABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. Before beginning any exercise program, con- sult your physician. This is especially impor- tant for persons over the age of 35 or per- sons with pre-existing health problems. 2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.
4 20. Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD A ND MOVE THE TREADMILL on page 17.) You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.
5 Thank you for selecting the PROFORM ® STYLE 4500 treadmill. The STYLE 4500 treadmill combines ad- vanced technology with innovative design to let you enjoy an exc ellent form o f cardiovascular exercise in t he convenience and privacy of y our h ome.
ASSEMBL Y A ssembly requires two persons. S et the treadmill in a cleared area and remove all packing materials; d o not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
7 2. Have a second person hold the B ase (5 2) in th e position shown. Identify the Left Upright (53) (the Right Upright [ 54] has a large hole near the lower end). Hold the L eft Upright (53) so the two small holes for the latch assembly are on top as shown.
8 5. See the left inset drawing. Identify the two Frame Spacers (11). Open the included packet o f grease, and apply grease to both sides of both Frame Spacers.
8. See the upper inset drawing. If there is a guard on the end of the Console Wire, press the indicated tab and remove the guard with needlenose pliers. Discard the guard. With the help of a second person, hold the Console (91) near the Right Upright (54).
10 11. Pivot the cylinder end of the Gas Spring (98) down to the position shown. Remove the Spring Clip (96) from the end of the Gas Spring. Next, align the cylinder end of the Gas Spring (98) with the bracket in the center of the Base (52). Press the end of the Gas Spring onto the ball on the bracket.
15. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place. The hex key is used to adjust the walking belt (see page 20). To protect the floor or carpet, place a mat under the treadmill.
12 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear.
13 FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective. While the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button.
14 HOW TO USE THE MANUAL MODE 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. 2. Select the manual mode. When the key is in- serted, the manual mode will be selected. If you have selected a speed workout, reselect the manual mode by pressing the Workout Select button repeatedly until only zeros appear in the displays.
15 To r ese t the dis pla ys, press the Stop button, re- move the key, and then reinsert the key. Note: The console can d isplay speed and dis- tance in either kilome- ters or miles. To see which unit of measure- ment is selected, first re- move the key, hold down the Stop button, reinsert the key into the console, and then release the Stop button.
16 HOW TO USE A SPEED WORKOUT 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. 2. Select one of the six speed workouts. To select a speed work- out, press the Workout Sel.
17 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the l owest position. If you do not do this, you may damage the treadmill when you fold it. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 lbs.
18 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Next, lower the frame until it is past the latch pin. Then, slowly release the latch knob.
19 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
20 P ROBLEM: The walking belt slows when walked on SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm 2 (14-gauge) cord that is no longer than 5 ft. (1.5 m). b . If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- c ome damaged.
21 These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results.
22 1 2 M10 x 60mm Patch Bolt 2 6 M10 x 58mm Bolt 3 2 M4.2 x 13mm Tek Screw 4 14 M4.2 x 16mm Screw 5 6 M8 Star Washer 6 1 Latch Warning Decal 7 2 M5 Star Washer 8 6 M8 x 15mm Bolt 9 6 M10 Star Washer 10 16 M4.
23 93 2 Belt Guide 94 1 5mm Hex Key 9 5 2 Frame Endcap 96 1 Gas Spring Clip Kit 97 1 Rear Foot, Right 98 1 Gas Spring 99 1 Receptical 100 1 Incline Motor Wire 101 2 Front Roller Washer 102 6 Cage Nut .
24 EXPLODED DRA WING A—Model No. P A TL50707.0 R 0907A 93 17 81 86 51 76 67 28 62 89 3 83 93 6 31 46 25 25 25 25 25 75 75 56 25 71 68 28 18 61 19 44 27 29 55 36 21 42 21 29 60 36 19 42 27 44 19 19 7.
25 EXPLODED DRA WING B—Model No. P A TL50707.0 R 0907A 34 38 44 79 34 30 59 38 107 106 11 5 11 2 11 4 111 11 3 11 0 111 116 11 0 37 11 3 66 90 20 20 20 99 65 47 47 47 57 21 21 42 42 21 109 87 2 23 2.
26 EXPLODED DRA WING C—Model No. P A TL50707.0 R 0907A 80 4 3 54 11 53 14 1 9 1 11 14 9 39 85 26 63 10 63 26 26 63 3 3 77 22 88 77 24 5 9 2 9 39 70 35 108 63 26 69 69 43 45 32 43 13 16 2 8 5 8 5 2 7.
27 EXPLODED DRA WING D—Model No. P A TL50707.0 R 0907A 15 91 73 4 12 9 4 4 4 4 4 4 4 4 4 21.
Part No. 260171 R1207A Printed in China © 2007 ICON IP, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, please see the dealer contact information on this page or on the included service card.
Ein wichtiger Punkt beim Kauf des Geräts ProForm PATL50707.0 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ProForm PATL50707.0 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ProForm PATL50707.0 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ProForm PATL50707.0 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ProForm PATL50707.0 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ProForm PATL50707.0 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ProForm PATL50707.0 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ProForm PATL50707.0. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ProForm PATL50707.0 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
