Benutzeranleitung / Produktwartung PR9030 des Produzenten Planar
Zur Seite of 47
PR9030 LCD Projector User's Manual Network Guide www .planar .com.
Impor tant R ecyc le Instruction Lamp(s) inside this product contain mercury . This product may contain other electronic waste that can be hazardous if not disposed of properly . Recycle or dispose i n a cco rd an ce w it h l oc al , s ta te , o r f ed er al L aw s.
1 Thank you for purchasing this projector . This projector has the network function that brings you the following main features. ►Before using this product, be sure to read all manuals for this product. After reading them, store them in a safe place for future reference.
2 Content Content Content .......................................................................................... 2 1. Main functions ........................................................................... 3 1.1 Conguring and controlling via a web browser .
3 1. Main functions 1. Main functions 1.1 Conguring and controlling via a web browser Y ou can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. Logon the network from the web browser and it offers the menus to congure the network settings, monitor the projector and so on.
4 2. Equipment connection and network setting 2.1 R equired equipment pr eparation 2. Equipment connection and network setting The following equi pments are required to connect the projecto r to your PC through the network.
5 2. Equipment connection and network setting 2.2 Manual network connection setting 2.2.1 Equipments connection Connect the projector and PC with a LAN cable. * Before connecting with an existing network, contact the network administrator . Next, please check the PC setting as explained below .
6 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 7) Set IP address, subnet mask and default gateway for PC. Fig. 2.2.2.d “Internet Protocol (TCP/IP) Properties” window 5) Open “Local Area Connection Properties” window you use for network device.
7 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) [About IP address] ■ Setting manually The Network address portion included in the IP address set into your PC should be common with projector ’ s one.
8 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 2) Click “Connections” tab and then click [LAN Settings] button to open “Local Area Network (LAN) settings”. (Fig. 2.2.3.c) Fig. 2.2.3.b “Internet Properties” window 2.
9 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) Fig. 2.2.4 “Logon Menu” 2.2.4 Check connection Check PC and projector are connected properly here. If it is not connected, check cable connections and settings are properly or not.
10 3. Management with Web browser softw are Conguring and Controlling the Pr ojector via a W eb Browser Y ou can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network.
11 3. Management with Web browser softw are 3.1 Conguring and contr olling the pr ojector via a we b browser Y ou can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. • Internet Explorer 5.
12 3. Management with Web browser softw are When conguring or controlling the projector via a web browser , an ID and password are required. There are two types of IDs, Administrator ID and User ID. The following chart describes the differences between Administrator and User IDs.
13 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.1 Logon Refer to the follo wing for conguring or c ontrolling the projector via a web browser . 1) Enter “http://192.168.
14 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.2 Network Infor mation All screen drawings in this manual are shown when you logon with the Administrator ID. Any functions that are available only for the Administrator will not be shown when you logon with the User ID.
15 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.3 Network Settings Displays and congures network settings. Item Description IP Conguration Congures network settings.
16 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.4 Port Settings Displays and congures communication port settings. Item Description Network Control Port1 (Port:23) Congures command control port 1 (Port:23).
17 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.5 Mail Settings Displays and congures e-mail addressing settings. Item Description Send mail Click [Enable] check box to use the e-mail function.
18 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.6 Aler t Settings Displays and congures failure & alert settings. Alert Item Description Cover Error The lamp cover has not been properly xed.
19 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) The Alert Items are shown below . Setting Item Description Alarm Time Congures the time to alert. (Only Lamp Time Alarm and Filter Time Alarm .
20 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.7 Schedule Settings Displays and congures schedule settings. Item Description Daily Congures the daily schedule. Sunday Congures the Sunday schedule.
21 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) The schedule settings are shown below . Item Description Schedule Click [Enable] check box to enable the schedule. Date (Month/Day) Congures the month and date.
22 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.8 Date/Time Settings Displays and congures the date and time settings. Item Description Current Date Congures the current date in year/month/day format.
23 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) Item Description Time difference Congures the time difference. Set the same time dif ference as the one set on your PC. If unsure, consult your IT manager .
24 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.9 Security Settings Displays and congures passwords and other security settings. Item Description Administrator authority Congures the Administrator ID and password.
25 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) Click [Apply ] button to save the settings. • The new conguration settings are activated after restarting the network connection.
26 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.10 Projector Contr ol Controls the projector . Item Description Main Power T urns the power on/off. Input Source Selects the input source.
27 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) Item Description Image Aspect Selects the aspect setting. Over Scan Adjusts the over scan setting. V Position Adjusts the vertical position.
28 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) Item Description Audio V olume Adjusts the volume setting. T reble Adjust the T reble setting. Bass Adjusts the Bass setting. SRS WOW Selects the SRS WOW setting.
29 3. Management with Web browser softw are Option Auto Search T urns the automatic signal search function on/off. Auto Keystone T urns the automatic keystone distortion correction function on/off. Auto on T urns the auto on function on/off. Auto off Congures the timer to shut of f the projector when no signal is detected.
30 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.11 Projector Status Displays the current projector status. Item Description Error Status Displays the current error status Lamp Time Displays the usage time for the current lamp.
31 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.12 Network Restar t Restarts the projector ’ s network connection. Item Description Restart Restarts the projector ’ s network connection in order to activate new conguration settings.
32 3. Management with Web browser softw are 3.2 E-mail Aler ts The projector can automatically send an alert message to the specied e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error .
33 3. Management with Web browser softw are 3.2 E-mail Alerts (continued) 8) Click [Alert Settings] on the main menu to congure the E-mail Alerts settings. 9) Select and congure each alert item. Refer to the item 3.1.6 Alert Settings ( 18 ) for further information.
34 3. Management with Web browser softw are 3.3 Projector Mana gement using SNMP The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function.
35 3. Management with Web browser softw are 3.4 Ev ent Scheduling The scheduling function enables to setup scheduled events including power on / power off. It enables to be “self-management” projector . • Y ou can schedule the following control events: Power ON/OFF , Input Source and T ransferred Image Display .
36 3. Management with Web browser softw are • In Standby mode the power indicator will ash green for approx. 3 seconds when at least 1 “Power ON” schedule is saved. • When the schedule function is used, the power cord must be connected to the projector and the outlet and the power switch must be turned on, [ | ].
37 3. Management with Web browser softw are • A Network Restart is required after the Daylight Savings Time or SNTP conguration settings have been changed. • The battery for the built in clock may be dead if the clock loses time even when the date and time have been set correctly .
38 3. Management with Web browser softw are 3.5 MY IMAGE (Still Image T r ansf er) Display The projector can display still images that are transferred via the network. • It is possible to allocate the image le up to 4 in the maximum. • The image le also can be displayed by using schedule function from the web browser .
39 3. Management with Web browser softw are 3.5 MY IMAGE (Still Image T ransfer) Display (continued) Congure the following items from a web browser when MY IMAGE is used. Example : If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.
40 3. Management with Web browser softw are 3.6 Command Control via the Networ k Y ou can congure and control the projector via the network using RS-232C commands.
41 3. Management with Web browser softw are 3.6 Command Control via the Network (continued) When the authentication setting is enabled, the following settings are required. ( 24 ) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password.
42 3. Management with Web browser softw are 3.6 Command Control via the Network (continued) Command F or mat Command formats differ among the dif ferent communication ports. ● TCP #23 Y ou can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands.
43 3. Management with Web browser softw are R epl y Da ta for mat The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data.
44 3. Management with Web browser softw are 3.6 Command Control via the Network (continued) Automa tic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. The projector does not accept commands without authentication success when authentication is enabled.
Planar Systems, Inc. Corporate Headquarters 1 195 NW Compton Drive Beaverton, OR 97006-1992 Planar Customer Suppor t T elephone: US: 1-866-PLANAR1 (866) 752-6271 Outside US: (503) 748-5799 E-mail: PlanarSupport@planar .com Online T echnical Library: http://www .
Ein wichtiger Punkt beim Kauf des Geräts Planar PR9030 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Planar PR9030 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Planar PR9030 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Planar PR9030 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Planar PR9030 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Planar PR9030 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Planar PR9030 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Planar PR9030. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Planar PR9030 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
