Benutzeranleitung / Produktwartung A02-IPCAM4-W54 des Produzenten Atlantis Land
Zur Seite of 85
Where solution s beg in ISO 9001:200 0 Certifi ed Company NetCamera NVW IP Security Wireless Night Vision Camera A02-IPCAM4-W54 MANUAL A02-IPCAM4-W54_ME01.
NetC amera NVW ITALI ANO Questo prodotto è coper to da garanzi a Atlantis Land Fast-S wap della durata di 3 anni. Per maggiori dettagli in meri to o per accedere alla docu mentazione comple ta in Italiano fare riferi mento al sito www .atlantis- lan d.
NetC amera NVW The award of the i nformation is facultative, but its lack will preven t ATLANTIS LA ND® from starti ng the Guarantee pro cess r equested. Copy right The Atlantis Land logo i s a registered trad emark of Atlantis Land S .p.A. All other names men tioned mat be trade marks or registered trademarks o f their r especti ve owners.
NetC amera NVW A02-I PCAM4-W54 5 INDEX Chapter 1 ...................................................................................................... 9 1.1 An Overview of NetCamera NVW ........................................................... 9 1.
NetC amera NVW A02-I PCAM4-W54 6 4.1.4 Video ....................................................................................... 44 Video ................................................................................................ 45 Audio ...
NetCamera NVW A02-I PCAM4-W54 7 Copyright Statem ent No part of this p ublication may be reproduced, stor ed in a retrieval system, or transmitted in an y form or by a ny means, whether electronic, mechani cal, photocopying , recording or otherwi se wit hout the prior writi ng of the publishe r.
NetCamera NVW A02-I PCAM4-W54 8 CE Mark Warni ng This is a Clas s B product. In a domesti c en viron ment, this product ma y cause radio interference , in which ca se the user ma y be re quired to take a dequate measures.
NetCamera NVW A02-I PCAM4-W54 9 Chapter 1 Introduction This manual is thin k for an advanced utili za tion of Ne tCamera NVW; for thi s reason, you can find e xplanation of any fu nctions su p ported by pr oduct. For fast con figuration , please re feree to Quick Star t Guide .
NetCamera NVW A02-I PCAM4-W 54 10 1.2 System Re quirements Before in stalling the device , your P C should mee t the follo wing: Local Area Network: 10 Base-T Etherne t or 100Base TX Fa st Ethernet CPU: Intel Celeron 1.
NetCamera NVW A02-I PCAM4-W 54 11 Chapter 2 Using NetCamera NVW 2.1 Cautions for NetCamera NV W Read thi s section to learn how to set u p your IP came ra and u se its ba sic fun ctions. Do not place the NetCamera NVW u nder high humidity a nd high temperature .
NetCamera NVW A02-I PCAM4-W 54 12 2.2 The Front LEDs LED Mea ning Power Lights when power ON Lan Network acti vity ind icator Flashes when sending/re ceiving data WLan Network acti vity ind icator Fla.
NetCamera NVW A02-I PCAM4-W 54 13 Night Vi sion Furthermore, tha nks its 8 integrated Infrared sensors, the Net Camera NV W’s auto ma tic Day/ Night functionality wil l change to In frared mode as i.
NetCamera NVW A02-I PCAM4-W 54 14 2.3 The Re ar Ports Port Mea ning Network Ca ble Ethernet por t with 10/100 Mbps Fa st Ethernet connections, con nect this por t to swi tch/hub GPIO Connector s Its b.
NetCamera NVW A02-I PCAM4-W 54 15 DC-IN Connect the Power Adapte r DC plug to the AP’s power jack Please check the at tached pi rcture in o rder to obtain more info abou t GPIO port.
NetCamera NVW A02-I PCAM4-W 54 16 2.4 Assem bling the Stand a nd Connecting to a Netw ork The camera can be assembled in two different ways; either fro m the top o f the uni t or the bo ttom .
NetCamera NVW A02-I PCAM4-W 54 17 The IP ca mera ca n be conne cted to an E thernet ne twork using the RJ-45 port as shown. Conne ct the ca mera to an Eth ernet hub or switch using a standard cable. You can also conne ct the camera directl y to a computer using the supplied cable.
NetCamera NVW A02-I PCAM4-W 54 18 Chapter 3 Config uratio n The NetCamera NVW can be configured wi th your Web browser. The web browser i s included a s a standard appl ication in the following o peration syste ms, UNIX, Linux, Mac OS, Windows 95/98 /NT/2000/Me, and etc.
NetCamera NVW A02-I PCAM4-W 54 19 3.1.1 Windows 95/98/ME 1. Go to Star t / Setti ngs / Co ntrol Pa nel . In the Con trol Panel, double-click on Network and choo se the Configur ation tab. 2. Select TCP / IP -> NE2000 Compatible , or the na me of an y Network Inter face Car d (NIC ) in your PC.
NetCamera NVW A02-I PCAM4-W 54 20 3.1.4 Windows XP 1. Go to Start / Co ntrol Pane l (in Clas sic View). In t he Control Panel , double-click on Netw ork Con necti ons. 2. Double-cli ck Local Area Conn ection 3. In the LAN Area Connection Statu s window, click Properti es.
NetCamera NVW A02-I PCAM4-W 54 21 3.3 Browser configuration Open the web bro wser, enter the lo cal port IP address o f this NetCamera NV W, which default a t 192.
NetCamera NVW A02-I PCAM4-W 54 22 instal l... . • Click Install Act iveX Control... . • In the Securi ty Warning window clic k Instal l . • The live video will now be strea med. Use the menu bar on the left side of the screen to perfor m actions and ente r the sub- menus: • Sn ap I mage : Click to save the current image.
NetCamera NVW A02-I PCAM4-W 54 23 The computer’s IP address must correspond with the camera’s IP addr ess in the same segment fo r the two devices to co mmunicate (E.
NetCamera NVW A02-I PCAM4-W 54 24 Chapter 4 Advanced Configura tion Read this chapter to learn how to ope rate the IP camera and take advanta ge of the advanced features such as alerting, and ftp transfer s. Open the web bro wser, enter the lo cal port IP address o f this NetCamera NV W, which default a t http ://192.
NetCamera NVW A02-I PCAM4-W 54 25 Enter your User Name and password. The default are adm in / at lant is. The computer’s IP address mu st correspond with the camera’s IP address in the same segment for the two de vices to comm unicate .
NetCamera NVW A02-I PCAM4-W 54 26 There are 3 sub menus in the men u sidebar: Home , Basic Setting and Advanced Setting. Home Pa g e Basic Settin g s Advanced Sett in g s.
NetCamera NVW A02-I PCAM4-W 54 27 4.1 Basic Settings Read this section to learn about all the se ttings and options under the Basi c Setting sub menu. There are five main screen s, access ed via the tabs at th e top of the screen: • System • Network • User • Video • Video Player 4.
NetCamera NVW A02-I PCAM4-W 54 28 Status Clic k the Statu s t ab to ac cess t he syst em st atus screen: Here is displa yed all camera, ethe rnet and wirel ess status infor mation, including firmware ver sion and ca mera n ame and type .
NetCamera NVW A02-I PCAM4-W 54 29 Log Clic k the Log tab to access the log list scr een. Here you can view a lo g of all recent syste m acti vity . Click the PrePage and NextPage buttons to move to the previou s or next page of the log and the Clear button to clear the log li st.
NetCamera NVW A02-I PCAM4-W 54 30 Time Click th e Time tab to access the date and time settings screen . Choose to either Syn cronize with Time Server , Synchroni ze with compu ter time or Set manua lly . If you select Sync hronize with Time Serve r , check the che ck-box , choose your time zone, and enter NTP server details.
NetCamera NVW A02-I PCAM4-W 54 31 If You meet pro blems, please follow these instru ctions: NTP Se rver = pool.ntp .org or 128.138 .140.44 Click the Save button to sa ve your settings and the Refr esh button to update th e system da te and time .
NetCamera NVW A02-I PCAM4-W 54 32 Click the Sfoglia(Brows e) button an d locate th e folder where the fir mwar e update is stored. Click the Upgrad e button to u pgrade the firmware . Do NOT upgrade firmware on any Atlantis Land product over a wireless conne ction.
NetCamera NVW A02-I PCAM4-W 54 33 4.1.2 Network The Network sub menu allows you to configu re al l sy ste m-r elat ed s etti ngs. The re a re four main screens, accessed via th e ta bs at the top of t.
NetCamera NVW A02-I PCAM4-W 54 34 Ethernet Clic k the Eth ernet tab to acc ess the ethernet sett ings screen: Here you can configure all setting s relat ed to your eth ernet, wireless, an d DNS & HTTP port se tup.
NetCamera NVW A02-I PCAM4-W 54 35 specify an alterna tive if, for e xample, they are running a web server on a PC within their LA N. For Example: User A changes HTTP port nu mber to 808 1. The NetCamera NV W will only allow User A acce ss typing : http://192.
NetCamera NVW A02-I PCAM4-W 54 36 Wireless Click the Wire less tab to access the wireless se ttings screen: • Conne cti on Type : Use this option to deter mine the type o f wireless communication for the ca mera. There are two choi ces: Infrastructure mode and Ad-Hoc mode.
NetCamera NVW A02-I PCAM4-W 54 37 connected in thi s box. Thi s default settin g will let the camera connect to ANY access po int under the infrastru cture network mode . • Ad-Hoc Type: Please select be tween 802.11g or 802 .11b if You are using a AD-Hoc network.
NetCamera NVW A02-I PCAM4-W 54 38 How to con figu re WE P secur it y: If you sel ect 64bit in He x format, you must type 10 valu es in the followi ng range (0~F, hexade cimal), or 64bi t in ASCII format, you must type 5 values in the following range (0~9, A~Z and a~z Alpha numeric).
NetCamera NVW A02-I PCAM4-W 54 39 bandwidth u tilization. Addi tionally, th e Access Poi nt ena bles users on a wirele ss LAN to access an existing wi red netwo rk, allowing wire less users to take advan tage of the wired networks reso urce s, such as In ternet, e mail, file transfe r, and printer sharing.
NetCamera NVW A02-I PCAM4-W 54 40.
NetCamera NVW A02-I PCAM4-W 54 41 PPPoE Clic k the PPPo E tab to access th e PPPoE settings screen: Here you can confi gure all PPPoE co nnection se ttings.If you connect to you r network via PPPoE, check the E nab le PPPoE che ckbox and enter your User Name and password.
NetCamera NVW A02-I PCAM4-W 54 42 DDNS Clic k the DDNS tab to ac cess t he DDNS sett ings sc reen: Here you can confi gure al l DDNS connection se ttings. DDNS allows PPP oE or DHCP dynami c IP users to access the IP camera using a single domain name.
NetCamera NVW A02-I PCAM4-W 54 43 4.1.3 User The User submenu enables you to set up us ers and admini stra-tors for the system. Th ere ar e two mai n scre ens, acc ess ed vi a the tab s at the top of the screen: • User • Password User Clic k the Use r tab to access the user set tings s creen.
NetCamera NVW A02-I PCAM4-W 54 44 4.1.4 Video The Video submenu enable s you to configure all video settin gs. There are two main screen s, accessed via the ta bs at th e top of the scr een: • Video.
NetCamera NVW A02-I PCAM4-W 54 45 Video Clic k the Video ta b to acc ess the video settings screen. Under Netw ork Tr affic Contro l , you can alter various op tions: • Connection Speed: Select the Hig h, Medium or Low radio button s depending on the speed of your netwo rk connection .
NetCamera NVW A02-I PCAM4-W 54 46 Under Ima ge Para meters , you can alter i mage output op tions. Make any adju stments for brigh tness, cont rast, saturation, and h ue of the im age using the + or - buttons. Clic k the Defa ult butto n to reset to the parameters to their default value.
NetCamera NVW A02-I PCAM4-W 54 47 • Hori zontal Flip: Check to flip the d isp lay image horizonta lly. • Show Camera Na me: Check to di splay the came ra name in the viewing window. • Show Time Labe l: Check to display a time and date label in the viewi ng window.
NetCamera NVW A02-I PCAM4-W 54 48 4.1.5 Video Player The Video Player submenu enables you to playba ck and con-vert recorded video clips to differen t for mats. Click the Sfoglia(Bro wse) button to l ocate th e file yo u wish to play. Cli ck t he Play and the Stop button s to star t and stop play-back.
NetCamera NVW A02-I PCAM4-W 54 49 4.2 Advanced The camera will fu nction fine after the Basic config uration, howe ver, you may wish to explore more advanced option s. This se ction explains each para meter and setting procedures for advanced configura tion of the camera.
NetCamera NVW A02-I PCAM4-W 54 50 4.2.2 Mail The Mai l submenu enables you to configure all mail serve r se t-ting s: When mail alerting is enabled, the camera sends a still image to a specified email address every ti me the alert is triggered (see “ C onf iguri ng B reac h Ma nager Settings ” for detail s on ho w to a ctiva te thi s option) .
NetCamera NVW A02-I PCAM4-W 54 51 4.2.3 GPIO The GPIO submenu enable s you to co nfigure all DI se nsor and DO se ttings: External DI sensors can be attache d via the GPIO port at the rear of the camera . The external sensor ca n be normally open , or normall y close d.
NetCamera NVW A02-I PCAM4-W 54 52 4.2.4 Breach Manager The Brea ch Ma nage r submenu enab les you to configur e all breach aler t and motion det ect ion s etti ngs: You can configure the syste m to capture im ages whe n either the motion se nsors, DI1 or DI2 sensors are acti vated .
NetCamera NVW A02-I PCAM4-W 54 53 • Enable m oti on detec ti on, if it i s not ena bled : The system will automatically enable motio n dete ction when the de vice is trig-gered.
NetCamera NVW A02-I PCAM4-W 54 54 Chapter 5 Support 5.1 Suppor t If you have an y problems with the IP Wirele ss Night Vision Camera, plea se con sult this manual.
NetCamera NVW A02-I PCAM4-W 54 55 APPENDIX A: Frequently Asked Questions A.1 Usin g LE Ds t o Dia gnose P roble ms The LEDs are useful aide s for finding possible proble m causes.
NetCamera NVW A02-I PCAM4-W 54 56 A.2 WE B I cannot acce ss the web con figurator. Steps CORRECTI VE ACTION 1 Make sure you a re using the co rrect IP address of the NetCamera NVW. Check the IP address of the NetCamera NVW (192.168.1.1) . 2 Ping the devi ce (ping 192 .
NetCamera NVW A02-I PCAM4-W 54 57 A.4 Ge neral Q uestions Question What is an IP Wi reless Security Nig ht Visi on Cam era? Answer The IP Wireless Securi ty Night Vision Camera is a standalone system connecting directly to an E thernet or Fast Ethernet network and suppo rted by the wirele ss transmissi on based on the IEEE 802.
NetCamera NVW A02-I PCAM4-W 54 58 Frequency (RF) noise in yo ur home or busine ss and the configuration se tting of your network environmen t. Question Can the IP Wireless Security Night Vision Camera be used outdoors? Answer The IP Wireless Security Night Vision Camera is not weatherproof.
NetCamera NVW A02-I PCAM4-W 54 59 Answer If a firewall e xists on the network, port 80 is open for ordinary data co mmunicatio n. Question What is S pread Spect rum? Answer Spread Spectrum technolog y is a wideband radio frequency technique developed by the military fo r use in re liable, se cure, mission-criti cal co mmunications systems.
NetCamera NVW A02-I PCAM4-W 54 60 Question Woul d the inform ation be inte rcep ted while trans mitting on a ir? Answer WLAN features two- fold prot ection in securi ty. On the hardware side , as with Direct Sequ ence Spread Spectr um technolog y, it has the inherent secu rity feature of scrambling.
NetCamera NVW A02-I PCAM4-W 54 61 the globe..
NetCamera NVW A02-I PCAM4-W 54 62 APPENDIX B : Trouble Shoo ting This chapter covers potential proble ms and the correspo nding remedies . Question I cannot access the IP Wireless Security Night Vision Camera from a we b b rowser .
NetCamera NVW A02-I PCAM4-W 54 63 Address of the IP Wirele ss Security Nigh t Vision Came ra is within the same subnet as your workstation . Click “Start”, “Settin g”, “Contro l Panel”, and the “Networ k” icon.
NetCamera NVW A02-I PCAM4-W 54 64 Question Why does the Link LED n ot light up properl y? Answer • There might be a problem with the n etwork cable. To confir m that the cable s are wor king, PING the address of a know devi ce on the ne twork.
NetCamera NVW A02-I PCAM4-W 54 65 Question Why does a series of bro ad vertical white line appears through out th e image? Answer A likely issue i s that the CM OS sensor beco mes overloaded when the light so urce is to o bri ght such as direct exposur e to sunlight or halogen light.
NetCamera NVW A02-I PCAM4-W 54 66 Vision Camera image display is inco rrect. Throug h the Web Configura tion Image section you need to adjust the image related para meter for improve images su ch as bri ghtness, con trast, hue and light frequency. Please refer to the Web Configuration section for detail information.
NetCamera NVW A02-I PCAM4-W 54 67 APPENDIX C: Adjust ing the Cam era Foc us To help you get the be st image quality, keep in mind that while ad justi ng the NetCamera NV W (Adjust by turnin g clockw ise or counter-clo ckwise ) focus you can preview the image quality from your Web bro wser.
NetCamera NVW A02-I PCAM4-W 54 68 APPENDIX D : GPIO Its back pane l contain s 3 pairs o f connectors (2 in put and 1 ou tput) all owing the camera to commu nicate with di fferen t elements of a building, such as elec tric doors and light swi tches or secur ity related d evices such as alarms.
NetCamera NVW A02-I PCAM4-W 54 69.
NetCamera NVW A02-I PCAM4-W 54 70 A normally open se nsor (NO/CO M ) is like an open switch that close s when triggered . In this ca se the Motion Dete ction switch on a spot. Please check the maxi mum Voltag e/Ampere ( DO): Max 24VDC/1A Max 125VA C /0 .
NetCamera NVW A02-I PCAM4-W 54 71 For example, entr ance guarding (DO).
NetCamera NVW A02-I PCAM4-W 54 72 For example, entr ance guarding (DO and DI).
NetCamera NVW A02-I PCAM4-W 54 73.
NetCamera NVW A02-I PCAM4-W 54 74 APPENDIX E: G lossary of Terms NUMB ERS 10BASE-T 10BASE-T i s Ethernet o ver UTP Ca tegory III,IV, o r V unshielded twisted-pai r media. 100BASE-TX The two-pair twisted-media i mplementati on of 100BASE-T is called 100BASE- TX .
NetCamera NVW A02-I PCAM4-W 54 75 B BOOTP Bootstrap Protocol is an Interne t protocol that can auto matically configure a ne twork devi ce in a di s kless work station to give its own IP address. C Communication Communication has four components: sender , recei ver, message, and me dium.
NetCamera NVW A02-I PCAM4-W 54 76 DNS Domain Name Syste m is an Intern et ser vice tha t tr anslates domain names into IP ad dresses. Since domain na mes are alphabetic, the y're easier to reme mber.
NetCamera NVW A02-I PCAM4-W 54 77 intranet pa ss through the fi rewall, which exa mines each message and blocks those th at do not me et th e specifie d security criteria . G Gateway A gateway links co mputers that use different data formats together .
NetCamera NVW A02-I PCAM4-W 54 78 addresses IP Internet Pro tocol is the standard tha t describes the layout of the basic unit of in formation on the In ternet (the packe t ) and also details the n umerical a ddressin g fo rmat used to route the information.
NetCamera NVW A02-I PCAM4-W 54 79 LAN Local Are a Networ k a computer ne twork that span s a relativel y small area sharing co mmon resour ces. Most LANs are confined to a single building or group o f buildings.
NetCamera NVW A02-I PCAM4-W 54 80 to troublesho ot Inte rnet connection s. PPPoE Point- to-Point Protocol over Eth ernet. PPP oE is a spe cification for connecting the user s on an Ethernet to th e Internet th rough a common broa dband medium, such as DSL or cable modem.
NetCamera NVW A02-I PCAM4-W 54 81 routing pa ckets between ne tworks. S Server It is a simple computer that pro vid es resource s, such as file s or other informatio n. SMTP The Simple Mail Transfer Protocol is used for Internet mail . SNMP Simple Ne twork Management Protocol.
NetCamera NVW A02-I PCAM4-W 54 82 U UDP The User Datagra m Protocol is a connectionless protocol th at resides abo ve IP in the TCP/ IP sui te ULP The upper-layer p rotocol refers to Application Layer protocol s such as FTP,SNMP , and SMTP. User Name The USERNAME is the unique name assi gned to each person who has a ccess to the LAN.
NetCamera NVW A02-I PCAM4-W 54 83 APPENDIX F : Technical Featur es TECHNICAL FEATUR ES CMOS Se nsor Number of e ffective pixels: 307200 pi xels (VGA) Resolution: 640 x 480 pi xel Lens Type: C3 Mou nt Lens (re movable) Focal length : f=6.0m m F-number: F1.
NetCamera NVW A02-I PCAM4-W 54 84 System CPU: A RM9/ MPEG4 encode chip (V GA) System Re quirements Local Area Network: 10 Base-T Ethernet or 100Base TX Fa st Ethernet CPU: I ntel Celeron 1.5GHz or above (Intel Pentium 4 i s preferred) Memory Size : 128 MB (256 MB reco mmended) VGA card resolutio n: 800x6 00 or abo ve Internet E xplorer 5.
NetCamera NVW A02-I PCAM4-W 54 85 *available with new firm ware release.
Where solutions begin ISO 9001:200 0 Certifi ed Company Atlantis Land S. p.A. Viale De Gasperi, 122 Mazzo di Rho – MI – It aly info@atlan tis-land.
Ein wichtiger Punkt beim Kauf des Geräts Atlantis Land A02-IPCAM4-W54 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Atlantis Land A02-IPCAM4-W54 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Atlantis Land A02-IPCAM4-W54 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Atlantis Land A02-IPCAM4-W54 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Atlantis Land A02-IPCAM4-W54 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Atlantis Land A02-IPCAM4-W54 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Atlantis Land A02-IPCAM4-W54 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Atlantis Land A02-IPCAM4-W54. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Atlantis Land A02-IPCAM4-W54 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
