Benutzeranleitung / Produktwartung ISB7005 des Produzenten AT&T
Zur Seite of 32
Installation Manual for Cisco IP TV R eceiv ers for use with y our A T&T U-v erse TV service Model ISB7005.
2.
3 Contents Notice for Installers ......................................................................................................... .4 IMPORT ANT SAFETY INSTRUCTIONS.............................................................................. 4 Change the Wa y Y ou Watch TV .
4 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions . 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7 ) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
5 V erify the Pow er Source from the On/O Po wer Light When the on/o power light is not illuminated, the apparatus ma y still be connected to the power source. The light ma y go out when the apparatus is turned o , regardles s of whether it is still plugged into an AC pow er source.
6.
7 Change the W ay Y ou W atch TV Welcome to U- v erse TV . The I SB7005 devices, known as U-verse receivers, bring a rich, new set of interactive services directly to you through your TV and your in-home IP network. The receiver uses wireless technology 802.
8 Fr ont Panel 1 Power T urns the receiver on or places it in standby . T o restart the receiver , press and hold the POWER button for 10 seconds . The LED is green 2 Model Number Identi es the mod.
9 Back Panel 1 T o TV (Video Out) Connect to TV . Y ou must set the channel on your TV to the channel designated by y our service provider (usually channel 3).
10 Because the connections for a high-de nition (HD) or standard-de nition (SD) TV are di erent, you must determine if your TV is HD or SD . Y our TV must receive HD signals for you to enjo y the bene ts of HDTV . Refer to the manual that came with y our TV for more information.
11 ISB7005 Wireless Netw ork Connection The ISB7005 receiver allo ws for easy and secure connection to U-v erse services. The signal strength indicator on the front panel of the receiver identi es the strength of the wireless connection and aids in the proper placement of the receiv er .
12 Connecting the Wireless A ccess Point to the Wir eless Gatewa y 1.Connect the 12 VDC Pow er Supply plug on the access point to the wall power outlet. Use only the po wer adapter provided with the pr oduct. 2. Connect the power plug to the pow er receptacle on the wireless acces s point.
13 Connections for a High-De nition TV (HDTV) T o use the receiver with an HD TV , you must make one of the follo wing connections to view the HD content. Refer to the owner’s manual for y our TV and the cabling diagrams in this manual for more detailed connection information.
14 Connections for a Standard-De nition TV (SD TV) When using the receiver with an SD TV , you must mak e one of the following connections to view content. Some SDTVs ma y not have all these connections . Refer to the owner’s manual for your TV and the cabling diagrams in this manual for more detailed information.
15 Connections for a V CR or D VD Recorder When using the receiver with a V CR or DVD r ecorder , you must mak e one of the following connections to view content. Although all connections provide y ou with quality service, we list the connections in our recommended order .
16 Connecting to an HD TV with an HDMI Connector Cable Used in this Con guration • 1 HDMI Cable Notes: • The HDMI port on the TV must support high-bandwidth digital content protection (HDCP). • The HDMI interface supports Dolby ™ Digital 5.
17 Connecting to an HD TV with a D VI Connector Cables Used in this Con guration • 1 HDMI-to-DVI Cable or 1 HDMI Cable and 1 HDMI-to-D VI Adapter • 1 Audio Left/Right Cable (Y ou can also use a.
18 Connecting to an HD TV with Component (YPbPr) Connectors Cables Used in this Con guration • 1 Component Video Cable (YPbPr) • 1 Audio Left/Right Cable (Y ou can also use an optical cable [indicated by the dotted line] instead of the Audio Left/Right Cable as shown in the diagram, dependent upon y our TV’s capabilities.
19 Connecting to an SD TV with Component (YPbPr) Connectors Cables Used in this Con guration • 1 Component Video Cable (YPbPr) • 1 Audio Left/Right Cable Note: The receiver must be set t o the proper standard-de nition mode.
20 Connecting to an SD TV with an S- Video Connector Cables Used in this Con guration • 1 S-Video Cable • 1 Audio Left/Right Cable W ARNING: Electric shock hazard! Unplug all electronic de vices before connecting or disconnecting any device cables to the r eceiver .
21 Connecting to an SD TV with an RCA - Type Connector Cables Used in this Con guration • 1 RCA-type Video Cable • 1 Audio Left/Right Cable W ARNING: Electric shock hazard! Unplug all electronic de vices before connecting or disconnecting any device cables to the r eceiver .
22 Connecting to an SD TV with a Coaxial Cable Cable Used in this Con guration • 1 Coaxial Cable Note: Y ou must set the channel on your TV to the channel designated b y your service pro vider (usually channel 3). Contact your service pro vider for the channel information.
23 Connecting to a Home Theater S ystem with Component (YPbPr) Connectors Cables Used in this Con guration • 1 Component Video Cable (YPbPr) • 1 Audio Left/Right Cable (Y ou can also use an optical cable [indicated by the dotted line] instead of the Audio Left/Right Cable as shown in the diagram.
24 Connecting to a Stereo V CR or D VD Recor der (optional) The diagram below shows ho w to connect a recording device to y our receiver . Although it is possible to watch TV using a connection thr ough your VCR or D VD recorder to the TV , this connection may not pro vide the best picture, and HDTV users ar e restricted to an SD format.
25 T roubleshooting If the receiver does not perform as expect ed, the following tips may help. If y ou need further assistance, contact your service pr ovider . No Picture • V erify that the power to your TV is turned on. • V erify that your wireless receiv er and wireless access point are po wered on.
26 Fr equently Ask ed Questions What Is Digital T elevision? Digital television (D TV) is a huge leap forward in television technology compar ed to analog television that has been widely av ailable since the 1940s. DTV is deliv ered and display ed using digital encoding, similar to the way a PC operates .
27 Picture F ormats What Is the Di erence Between a Standar d-Screen and a Wide- Screen HDTV? The type of screen your HD TV has (wide-screen or standard-screen) det ermines how the receiver displays programs on the scr een.
28 A AC P ower input 9 Arrow k eys 8 Aspect ratio 27 Audio Out 9, 13, 14, 15 B Back panel 9 Burn-in of screen 25 Buttons See Front P anel C Cables 9, 10, 12, 16-24 CA T -5 See Ethernet Coaxial Cable Input 22 Compliance, FC C 30 Component video connection.
29 Index, continued P Picture formats 27 Ports. See Connectors Pow er 8, 9 Programs, view 26 Progressiv e screen resolution 27 R RGB connector 13, 25 S S- Video Out 9, 14, 15 S- Video In 14, 15 Safety 4, 5 Scan rates.
30 United States FC C Compliance This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the F CC Rules. These limits are designed to provide r easonable protection against such interference in a residential installation.
31 Federal Communication Commis sion Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital de vice, pursuant to Part 15 of the FC C Rules. These limits are designed to provide r easonable protection against harmful interference in a residential installation.
© 2011 Cisco and/or its a liates. All rights reserved. May 2011 4024566 Rev A Cisco Systems, Inc. 678 277-1120 5030 Sugarloaf Parkway , Box 465447 800 722-2009 Lawrenceville, GA 30042 www .
Ein wichtiger Punkt beim Kauf des Geräts AT&T ISB7005 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AT&T ISB7005 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AT&T ISB7005 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AT&T ISB7005 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AT&T ISB7005 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AT&T ISB7005 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AT&T ISB7005 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AT&T ISB7005. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AT&T ISB7005 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
