Benutzeranleitung / Produktwartung 555-600-736 des Produzenten AT&T
Zur Seite of 38
AT&T MERLIN LEGEND™ COMMUNICATIONS SYSTEM APPLICATION NOTES MERLIN LEGEND™ COMMUNICATIONS SYSTEM Applications Note On Basic Trunking Concepts Abstract This Application Note describes the various types of trunks that link the MERLIN LEGEND Communications System with the telephone network.
Issued January 1992 Copyright 1991. AT&T 555-600-736 Jim Pastorius Kevin Lyons Writers/Editors Contributors: A. Cohen D. Guerro V. Illuzzi R.G. Koppenheffer D.
MERLIN LEGEND TRUNKING CONCEPTS APPLICATION NOTE INDEX Introduction Tip & Ring Explained Lines & Trunks Loop-Start Trunks Operations Potential Problems When to Use L/S Ground-Start Trunks Oper.
-2- INTRODUCTION TO TRUNKING CONCEPTS The way lines and trunks have been used to meet customers’ needs over past decades is rapidly changing. T-1, ISDN technology, fiber optics, and other advances in telecommunications are forcing us to rethink what lines and trunks should be used for a PBX or Key system.
-3 - LINES AND TRUNKS Telephone lines and telephone trunks are facilities that carry voice or data communications. They are similar in form and function, and the two terms are usually treated as if they are interchangeable.
-4 - LOOP-START TRUNKS: OPERATIONS Loop-start facilities are the simplest and most common end-user facilities in the nation-wide telephone network. Loop-start facilities provide virtually no supervision between the central office and the customer premises equipment (CPE).
-5 - LOOP-START TRUNKS: POTENTIAL-PROBLEMS The most common application for loop-start facilities is single line residential service. Many of the disadvantages of a loop-start trunk in a PBX environment can be inferred from the operation of a loop-start residential telephone line, like the one you have at home.
-6 - The ARS feature also isolates the station user from the specific trunk, and even the group of trunks. that carries each outgoing call. Other features.
-7 - LOOP-START TRUNKS: WHEN TO USE LOOP-START TRUNKS There are two times when you consider the use of loop-start facilities: when you should use loop-start facilities and when you must use loop-start facilities.
-8 - Cost Unfortunately, the most common reason for using loop-start trunks is the least valid. This reason is cost. If a customer currently has a key system, service at that location is undoubtedly supplied by loop-start lines.
-9 - GROUND-START TRUNKS: OPERATIONS Ground-start facilities were specifically introduced to solve the problems that PBXs encounter on loop-start trunks. A ground-start facility provides an immediate signal when it is seized and it provides a positive signal when one party disconnects.
-10- GROUND-START TRUNKS: POTENTIAL PROBLEMS There are very few problems that can occur when properly functioning ground-start trunks serve a properly administered PBX, since modem PBXs and ground-start trunks were literally made for each other.
-11- DIRECT INWARD DIALING (DID) TRUNKS: OPERATIONAL CHARACTERISTICS Loop-start trunks and ground-start trunks are simple, two-way local facilities, i.e., they can handle incoming and outgoing calls. The operation of loop-start and ground-start trunks can be understood by analogy to the residential service in your your home.
-12- Once a trunk has been seized -- the PBX has been alerted to the incoming DID call, and the addressing information has been sent -- there are three possible responses from the PBX.
-13- Outpulsing methods, it seizes a trunk by closing the loop and allowing current to flow. When the PBX recognizes the trunk seizure from the CO it responds by reversing the battery and ground on the Tip and Ring leads. On delay-dial trunks this signal is called the delay-dial signal.
The options for each trunk group are as follows: * DID Trunk Protocol *Wink start (default) -14- ● immediate start * Dial Mode * pulse (default) ● tone * Expected Number of Digits * 3 (default) *0.
-15- WHEN TO USE DID TRUNKS DID trunks provide fast access to specific individuals. DID trunks should be considered when a customer has sales people who work with assigned territories, service people who work with ‘assigned accounts, or any other organization seeking personal accountability.
-16- (There will be some Of course, these tie ordinary tie trunks. In special cases, tie trunks are used to join one PBX directly to another PBX. This may occur if multiple PBXs serve a single-customer at a single location.
-17- TIE LINES: Transferring Calls The MERLIN LEGEND CS supports trunk calls that come into the system and go out on another trunk without any operator assistance. However, the transmission code in the system does not permit multiple hops, and there is no automatic routing system which can be used for tandem trunking.
-18- In order to approach a.LEGEND system implementation with tie trunks it is really only necessary to know which signaling formats are supported and to determine which of these supported formats are required. The LEGEND system with the 400EM module supports Type 1 E&M Standard, Type 1 E&M Compatible, and Type 5 tie trunks.
-19- OFF PREMISES STATIONS On occasion, customers need to locate telephones away from the principal area of the PBX or Key system terminal concentration. The telephone can use an off-premises or out-of-building arrangement. There is a major difference between the two types.
-20 - When an Off-Premises telephone is connected to the LEGEND system via the 008 OPT module certain accessories must be used for grounding and protecting the system from power surges, electromagnetic interferences, and electrostatic discharges. These components are specified in Section 5 of the LEGEND System Reference Manual.
-21- T-1 (DS1) SERVICE OVERVIEW AND OPERATIONS The goal of the T-1 (DS1) section is to present basic information about T- 1 networking, what it is, how it operates, and what it means to the customer. The section does not explain how the MERLIN LEGEND Communications System interfaces with ISDN-PRI.
-22- service, quickly and efficiently. In the past it was necessary to establish a new circuit for virtually every application a customer wished to use. Whether it was teleconferencing, facsimile, hifi audio, video, or computer transmissions, generally a new line or trunk had to be run.
-23- The technology for T-1 is moving rapidly. The encoding system and components are not always upgradable to the newer innovations. ● If the customer application requires maximum network reliability, automatic dialing back-up in case of digital facility failure could prove costly.
-24- CHANNEL SERVICE UNIT (CSU) The Channel Service Unit (CSU) provides the interface between the 100D module and the DS1 facilities. T WO AT&T models are available for use on the Legend system: the ESF T1 CSU and the 551 T1 L1 CSU. ● Model 551-T1L1 Reg.
-25- MULTIPLEXER (MUX) Multiplexer are devices that combine several individual information-carrying channels for transmission over an aggregate link. This is done by allotting this aggregate link to multiple users, in turn to constitute different intermittent channels or time slots (time division multiplexing for digital transport.
-26- The following table identities the AT&T DS1 services available to customers. DS1 FACILITY SERVICES Digital Signal 1 Service Description ISDN T-1 Megacom (Megacom An outgoing x x WATS) Service domestic long- distance service used in place of WATS service.
-27- Digital Signal 1 Service Description ISDN T-1 Multiquest Service An incoming 900 x With DNIS number that provides callers with voice and data information service on an interactive basis. software Defined A virtual private x x Network (SDN) networking service Service for voice and circuit switched data calls (Up to 56 Kbps).
-28- Digital Signal 1 Service Station Number Identification/ Automatic Number Identification (SID/ANI) Service Description A caller identification service for systems with display telephones, call report systems, etc. ** SID allows the called station t o display the station number of the caller.
-29- SPECIAL HOTEL/MOTEL TRUNKS OPERATION OVERVIEW In certain areas of the country there are special trunks for hotels and motels about which you should be aware. At one time they were widely used but today they are found generally in rural areas. The trunks generally are called HOBIC lines by telephone company personnel.
-30- HARDWARE The Legend system hardware most directly connected with Lines/Trunks are the Control Unit Modules. The specifications for each module are presented later in this section. Also the system uses different types of lines/trunks for the different individual functions of each operating mode.
-31- LEGEND SYSTEM CONTROL UNIT MODULES MODULE 008 008 MLX LINE/TRUNK TYPE n/a n/a 008 OPT n/a STATION TYPE Analog multiline telephone; Call Management System; analog data with a general purpose adapt.
- 32 - MODULE 012 (T/R) 100D DSI 400/TTR* 400 E&M 400 GS/LS/TTR LINE/TRUNK TYPE n/a T-1 or PRI Loop-start and TTR Tie trunk Loop-start or ground-start and STATION TYPE Single-line telephone; MERLI.
-33 - MODULE LINE/TRUNK STATION TYPE SPECIFICATIONS TYPE 408* L00p-start Analog multiline Capacity: 4 lines/trunks, 8 stations. telephone; Call IPFT telephone Management System; Station signaling: analog multiline PFT telephone telephone (40 kbps) Line/trunk signaling: Loop-start line/ trunk: analog voice Loop range: 1000 ft.
-34- This section lists the LEGEND system trunk and off-premises modules and the appropriate PEC and Comcodes. More complete code information can be found in Section A of the Systems Manual (555 -610- 200).
-35- ADMINISTRATION To properly administer a MERLIN LEGEND system at the time of initialization requires that care be taken during the planning phase of the sales activity. This is especially true if the system is to connect to a number of different trunks and lines, such as DID, Tie, or ISDN.
-36- REFERENCES GBS SCAN Competitive Newsletter, “Everything You Need to Know About ISDN”, Nov/Dec 1988. MERLIN LEGEND Key System Planning Manual (555-610-112) MERLIN LEGEND PBX System Planning Ma.
Ein wichtiger Punkt beim Kauf des Geräts AT&T 555-600-736 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AT&T 555-600-736 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AT&T 555-600-736 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AT&T 555-600-736 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AT&T 555-600-736 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AT&T 555-600-736 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AT&T 555-600-736 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AT&T 555-600-736. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AT&T 555-600-736 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
