Benutzeranleitung / Produktwartung FR85041 des Produzenten Pelco
Zur Seite of 33
ADDENDUM Pelco Worldwide Headquarters 3500 Pelco W ay • Clovis, California 93612 USA USA & Canada • T el: 800/289-9100 • Fax: 800/289-9150 International • T el: 1-559/292-1981 • Fax: 1-559/348-1120 www .pelco.com ® Pelco and the Pelco logo are registered trademarks of Pelco.
® INST ALLA TION FT85041/FR85041 Fiber T ransmitter and Receiver Four -Channel Digitally Encoded V ideo with Bidirectional Data C1645M-A (9/06) C1645M-A.
C1645M-A.book Page 2 Wednesday, September 13, 2006 3:07 PM.
C1645M-A (9/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C1645M-A (9/06) List of T ables A Data Selection Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 B Data Connector Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 C Troubleshooting with Front-Panel Indicators .
C1645M-A (9/06) 5 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
6 C1645M-A (9/06) The product and/or manual may bear the following marks: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
C1645M-A (9/06) 7 Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
8 C1645M-A (9/06) Product Overview DESCRIPTION The FT85041/FR85041 fiber transmitter and receiver provide the ability to transmit four unidirectional composite video channels and one bidirectional data channel over one optical fiber (refer to Figure 1 ).
C1645M-A (9/06) 9 MODELS The FT85041/FR85041 fiber transmitter and receiver consist of the following series of m odels: Multimode Models: * FT85041MSTR Four -channel fiber optic video transmitter/si.
10 C1645M-A (9/06) FRONT PANEL The front panel of the FT 85041 transmitter and the FR85041 receiver provides LED indicators that allow you to monitor data activity, signal status, laser status, a nd operating power . The following sections provide a view of the front panel of the FT 85041 transmitter and the FR 85041 receiver .
C1645M-A (9/06) 11 FRONT PANEL - FR85041 RECEIVER Figure 3 illustrates the front panel of the FR 85041 receiver . Figure 3. Front Panel of FR850 41 Receiver For detailed information about the front-panel indicators, refer to the T roubleshooting section.
12 C1645M-A (9/06) REAR PANEL Connections to the FT 85041 transmitter and the FR85041 receiver are made to the rear panel of the module. The following sections provide a view of the rear panel of the FT 85041 transmitter and the FR85041 receiver . REAR PANEL - FT85041 T RANSMITTER Figure 4 illustrates the rear panel of the FT 85041 transmitter .
C1645M-A (9/06) 13 REAR PANEL - FR85041 RECEIVER Figure 5 illustrates the rear panel of the FR 85041 receiver . Figure 5. Rear Panel of FR850 41 Receiver For additional information about rear-panel connections and about the Data Selection switch, refer to the Installation section.
14 C1645M-A (9/06) Installation PACKAGE CONTENTS The following items are supplied: 1 FT85041 transmitter or FR85041 receiver 1 Regulated switching power supply with four plug adapters (North American, Australian, U.K., and European configurations); 100-240 VAC, 50-60 Hz input, 12 VDC output 1 Wall clip with two 4-40 x 0.
C1645M-A (9/06) 15 With the FT85041 transmitter/FR85041 receiver powered off, turn the Data Selection switch using a screwdriver until the number representing the required data communication is selected. Refer to T able A for Data Selection switch settings.
16 C1645M-A (9/06) MOUNTING The FT85041 transmitter/FR85041 receiver can be mounted into a rack or can be used as a stan d- alone module. As a stand -alone module, the unit can be placed on a desktop or can be mounted to a wall.
C1645M-A (9/06) 17 Mounting the T ransmitter/Receiver Using the W all Clip NOTE: Before mounting the FT 85041 transmitter/FR85041 receiver to a wall, ensure that there is adequate space at both ends for viewing the front-panel LEDs and for m aking the various rear-panel cable connections.
18 C1645M-A (9/06) CONNECTIONS Connections to the FT 85041 transmitter and the FR85041 receiver are made on the rear panel of the modules and consist of the following: • Power connection NOTES: – A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a stand-alone module.
C1645M-A (9/06) 19 T able B. Data Connector Pin Assignment s Pin Number RS-232 RS-422 RS-485 2-Wire RS-485 4-Wire Manchester Bi-Phase 1 — TX+ (Out+) T+/R+ (Out+/In+) TX+ (Out+) — — 2 — TX- (Ou.
20 C1645M-A (9/06) Figure 9. RS-232 Data Communication Wiring R S -232 D ATA S ELE C TION RS-232 DA T A CONNECTIONS BETWEEN DEVICE A AND FR85041 RECEIVER FR 8 5041 RE C EIVER – DA T A C ONNE C TOR 1.
C1645M-A (9/06) 21 Figure 10. RS-422 Data Communication Wiring R S -422 DA T A S ELE C TION RS-422 DA T A CONNECTIONS BETWEEN DEVICE A AND FR85041 RECEIVER 1 TX+ 2 TX- 3 RX+ 4 RX- (DA T A OUT+) (DA T .
22 C1645M-A (9/06) Figure 11. RS-485 2-Wire (Half Duplex) Data Communication Wiring R S -4 8 5 2-WIRE D ATA S ELE C TION RS-485 2-WIRE DA T A CONNECTIONS BETWEEN DEVICE A AND FR85041 RECEIVER FR 8 504.
C1645M-A (9/06) 23 Figure 12. RS-485 4-Wire (Full Duplex) Data Communication Wiring R S -4 8 5 4-WIRE DA T A S ELE C TION RS-485 4-WIRE DA T A CONNECTIONS BETWEEN DEVICE A AND FR85041 RECEIVER FR 8 50.
24 C1645M-A (9/06) Figure 13. Manchester Data Communication Wiring MAN C HE S TER MAN C HE S TER DA T A S ELE C TION MANCHESTER DA T A CONNECTIONS BETWEEN DEVICE A AND FR85041 RECEIVER FR 8 5041 RE C .
C1645M-A (9/06) 25 Figure 14. Bi-Phase Data Communication Wiring BI-PHASE DA T A CONNECTIONS BETWEEN DEVICE A AND FR85041 RECEIVER BI-PHASE DA T A CONNECTIONS BETWEEN DEVICE B AND FT85041 TRANSMITTER .
26 C1645M-A (9/06) T roubleshooting LED indicators on the front panel of the FT 85041 transmitter/FR85041 receiver allow you to monitor signal status, laser status, data activity , and operating power . T able C provides information about the front-panel indicators and associated troubleshooting guidelines.
C1645M-A (9/06) 27 Optic Fault LED - Optical Signal Status Green The optical signal is being received. — No action required. Red The optical signal is not being received. Remote fiber module is n ot powered on. Check power connections. Replace power supply if necessary .
28 C1645M-A (9/06) Data Tx LED Flashing amber Data is being trans- mitted onto the fiber by the data port. — No action required. Red Data Selection switch is set to an invalid setting. Data Selection switch is set to setting 5, 6, 7, 8, or 9. Set Data Selection switch to the correct setting for the desired data communication (refer to T able A).
C1645M-A (9/06) 29 Specifications VIDEO Number of Channels 4 Modulation T ype Pulse code modulation, 8-bit resolution Video Input (FT85041)/ 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM Video Output (FR85041) Bandwidth 6.5 MHz Gain Unity Crosstalk -50 dB typical at 3.
30 C1645M-A (9/06) OPTICAL POWER BUDGET , TRANSMISSION DISTANCE, AND LASER CLASS 1 LIMIT Model No. Wavelength Optical Power Budget Maximum T ransmission Distance Laser Class 1 Limit* T ransmitter Compatible Receiver Multimode (62.5/125 µm) FT85041MSTR FR85041MSTR 1310 nm (video) 20 dB † 2 km (1.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FR/FT/FS Series fiber optic products.
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www.
Ein wichtiger Punkt beim Kauf des Geräts Pelco FR85041 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pelco FR85041 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pelco FR85041 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pelco FR85041 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pelco FR85041 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pelco FR85041 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pelco FR85041 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pelco FR85041. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pelco FR85041 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
