Benutzeranleitung / Produktwartung FR85011 des Produzenten Pelco
Zur Seite of 32
® INST ALLA TION FT85011/FR85011 Fiber T ransmitter and Receiver Single-Channel Digitally Encoded V ideo with Bidirectional Data C1642M-A (1/05) C1642M-A FT85011.
C1642M-A FT85011.book Page 2 Wednesday, January 19, 2005 12:46 PM.
C1642M-A (1/05) 3 Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C1642M-A (1/05) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C1642M-A (1/05) 5 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
6 C1642M-A (1/05) CAUTION: These servicing instructions are for use by qualifi ed service personnel only. T o reduce the risk of electric shock do not perform any servicing other that contained in the oper - ating instructions unless you are qualifi ed to do so.
C1642M-A (1/05) 7 Product Overview DESCRIPTION The FT85011/FR85011 fi ber transmitter and receiver provide the ability to transmit one unidirectional composite video channel and one bidirectional data channel over one optical fiber .
8 C1642M-A (1/05) • Standalone and rack-mountable modular design • LED indicators for monitoring of signal status, data activity , and operating power NOTES: • The FT85011 transmitter/FR85011 receiver is a Class 1 laser product that complies with FDA radiation performance standard 21CFR Subchapter J and with IEC 60825-1 Edition 1.
C1642M-A (1/05) 9 MODELS The FT85011/FR85011 fi ber transmitter and receiver consist of the following series of m odels: Multimode Models: FT85011MSTR Single-channel fi ber optic video transmitter/d.
10 C1642M-A (1/05) FRONT PANEL The front panel of the FT85011 transmitter and the FR85011 receiver provides LED indicators that allow you to monitor data activity, signal status, and operating power (refer to Figure 2).
C1642M-A (1/05) 11 REAR PANEL All connections to the FT85011 transmitter and FR85011 receiver are made to the rear panel of the modules (refer to Figure 3).
12 C1642M-A (1/05) Installation PACKAGE CONTENTS The following items are supplied: • With the FT85011 transmitter: 1 Regulated switching power supply with four plug adapters (North American, Australian, U.K., and European configurations); 100-240 V AC input, 12 VDC output 1W all clip with two 4-40 x .
C1642M-A (1/05) 13 With the FT85011 transmitter/FR85011 receiver powered off, set the Data Selection switch to the required data communication using a small screwdriver.
14 C1642M-A (1/05) MOUNTING THE T RANSMITTER/RECEIVER INTO A RACK Optional fiber rack mount chassis, which can be mounted into an industry-standard 19-inch (48.26 cm) equipment rack, are designed for installation of multiple modules: • The RK5000PS-3U fiber rack mount chassis provides 12 module slots and a power supply .
C1642M-A (1/05) 15 Figure 5. Mounting the FT85011 T ransmitter/FR85011 Receiver Using the W all Clip TRANSMITTER/ RECEIVER WALL CLIP LOWER FLANGE SCREW, PHILLIPS PAN HEAD WITH LOCK WASHER (2) HORIZONTAL MOUNTING HOLE (2) UPPER FLANGE VERTICAL MOUNTING HOLE (2) C1642M-A FT85011.
16 C1642M-A (1/05) CONNECTIONS Connections to the FT85011 transmitter and the FR85011 receiver are made on the rear panel of the modules and consist of the following: • Power connection NOTE: A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a standalone module.
C1642M-A (1/05) 17 T able B. Data Connector Pin Assignments Pin Number RS-232 RS-422 RS-485 2-Wire RS-485 4-Wire Manchester Bi-Phase 1— Out+ In+/Out+ Out+ — — 2— Out- In-/Out- Out- — — 3.
18 C1642M-A (1/05) Figure 7. RS-232 Data Communication Wiring 0 1 2 3 4 5 6 7 8 9 RS-232 DATA SELECTION RS-232 DATA CONNECTIONS BETWEEN DEVICE A AND FR85011 RECEIVER FR85011 RECEIVER – DATA CONNECTO.
C1642M-A (1/05) 19 Figure 8. RS-422 Data Communication Wiring 0 1 2 3 4 5 6 7 8 9 RS-422 DATA SELECTION RS-422 DATA CONNECTIONS BETWEEN DEVICE A AND FR85011 RECEIVER 1 (TX+) DATA OUT+ 2 (TX-) DATA OUT.
20 C1642M-A (1/05) Figure 9. RS-485 2-Wire (Half Duplex) Data Communication Wiring 0 1 2 3 4 5 6 7 8 9 RS-485 2-WIRE DATA SELECTION RS-485 2-WIRE DATA CONNECTIONS BETWEEN DEVICE A AND FR85011 RECEIVER.
C1642M-A (1/05) 21 Figure 10. RS-485 4-Wire (Full Duplex) Data Communication Wiring 0 1 2 3 4 5 6 7 8 9 RS-485 4-WIRE DATA SELECTION RS-485 4-WIRE FR85011 DATA CONNECTIONS BETWEEN DEVICE A AND RECEIVE.
22 C1642M-A (1/05) Figure 11. Manchester Data Communication Wiring MANCHESTER 0 1 2 3 4 5 6 7 8 9 MANCHESTER DATA SELECTION MANCHESTER DATA CONNECTIONS BETWEEN DEVICE A AND FR85011 RECEIVER FR85011 RE.
C1642M-A (1/05) 23 Figure 12. Bi-Phase Data Communication Wiring BI-PHASE DATA CONNECTIONS BETWEEN DEVICE A AND FR85011 RECEIVER BI-PHASE DATA CONNECTIONS BETWEEN DEVICE B AND FT85011 TRANSMITTER FT T.
24 C1642M-A (1/05) T roubleshooting LED indicators on the front panel of the FT85011 transmitter/FR85011 receiver (refer to Figure 2) allow you to monitor signal status, data activity, and operating power. T able C pro- vides information about the front-panel indicators and associated troubleshooting guidelines.
C1642M-A (1/05) 25 Video Present LED (Continued) Red on receiver Incoming video signal is not present on the channel. Optical signal is not being received from the transmitter . Carrier Detect LED is also red. Refer to the Carrier Detect LED troubleshooting section below .
26 C1642M-A (1/05) Carrier Detect LED (Continued) Red on transmitter (continued) A problem exists with the optical power budget. V erify that losses in fiber optic cable do not exceed the optical power budget specification of the fiber optic link. If the losses do exceed the optical power budget, contact Product Support.
C1642M-A (1/05) 27 Data Tx LED Flashing amber Data is being transmitted onto the fiber by the data port. — No action required. Red Data Selection switch is set to an invalid setting. Data Selection switch is set to setting 6, 7, 8, or 9. Set Data Selection switch to the correct setting for the desired data communication (refer to T able A).
28 C1642M-A (1/05) Specifications VIDEO Number of Channels 1 Modulation T ype Pulse code modulation, 8-bit resolution Video Input 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM Bandwidth 6.
C1642M-A (1/05) 29 OPTICAL POWER BUDGET , TRANSMISSION DISTANCE, AND LASER CLASS 1 LIMIT Fiber Wavelength Optical Power Budget Maximum T ransmission Distance Laser Class 1 Limit* Multimode 1310 nm (video) 20 dB † 6 km (3.7 mi) ‡ <15.6 mW 850 nm (data) 20 dB † 6 km (3.
C1642M-A FT85011.book Page 30 Wednesday, January 19, 2005 12:46 PM.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
® United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
Ein wichtiger Punkt beim Kauf des Geräts Pelco FR85011 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pelco FR85011 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pelco FR85011 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pelco FR85011 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pelco FR85011 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pelco FR85011 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pelco FR85011 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pelco FR85011. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pelco FR85011 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
