Benutzeranleitung / Produktwartung C3433M (3/07) des Produzenten Pelco
Zur Seite of 24
IP110 Series Camclosure ® W eb Browser C3433M (3/07) OPERA TION.
2 C3433M (3/07) Contents Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C3433M (3/07) 3 VIDEO QUALITY—CAUTION REGARDING USER SELECTED OPTIONS Pelco systems are capable of providing high quality video for both live viewing and playback. However , the systems can be used in lower quality modes, which can degrade picture quality , to allow for a slower rate of data transfer and to reduce the amount of video data stored.
4 C3433M (3/07) W elcome This manual explains how to interface with the IP110 Camclosure ® using a standard Web browser (example Microsoft ® Internet Explorer). The IP110 can also be used with an Endura ® system as an Endura Enabled ™ device or a third party system with Pelco’ s API interface.
C3433M (3/07) 5 Using a W eb Browser The following are the minimum system requirements to use a Web browser with the IP110: • PC (Pentium ® 4 microprocessor , 1.6 GHz) with Windows 98/2000/XP (or higher) or Mac OS X 10.3.9 (or higher) • RAM: 512 Mbyte • Ethernet Card: 100 Mbit • Microsoft ® Internet Explorer 5.
6 C3433M (3/07) IP110 Main Menu HOME SCREEN The following features are available from the Home Screen: • Live Stream View: Live video is displayed in the center of the screen. • Image Rate Setting: The image rate can be set to 15, 10, 5, 2, or 1 ips; 15 is the default setting.
C3433M (3/07) 7 IMAGE RATE SETTING The image rate for the IP110 can be set to 15, 10, 5, 2, or 1 ips. 15 ips is the default setting. T o change the image rate do the following: 1. Open the Image Rate drop-down box by clicking the down arrow . 2. Select a image rate from the drop-down box.
8 C3433M (3/07) SETTINGS SCREEN Use the Settings screen to set the name and language of the IP110; configure network settings; and add, change, or delete users and roles (permissions). GENERAL T AB Use the general tab to change the device name to a user -friendly name.
C3433M (3/07) 9 NETWORK T AB Use the Network tab to change network settings including the host name, turn DHCP (Dynamic Host Configuration Protocol) setting on/off, or set a static IP address. Figure 4. Network T ab How to Change the Network Settings 1.
10 C3433M (3/07) USERS T AB The User tab allows the administrator to create, modify , or delete user accounts (which can contain one or more roles). The User tab includes default accounts for the following: • Administrator: This is the only defined user that cannot be deleted.
C3433M (3/07) 11 How to Add a New User 1. Click Settings in the main menu, the IP110 settings menu opens. 2. Click the Users tab. The Create a New User form opens. 3. Fill in the form fields. (User name, Password and Role are required fields.) Do not use spaces when entering the user name in the User Name field.
12 C3433M (3/07) ROLES T AB Use the Roles tab to create, change, or delete roles (permissions). Multiple permissions can be assigned to a role. The following are the available permissions that can be assigned to a role: • Edit Users Profile: Gives a user permission to edit his/her user profile.
C3433M (3/07) 13 How to Modify an Existing Role 1. Click Settings in the main menu, the IP110 settings menu opens. 2. Click the Roles tab. All defined roles are located in the box on the left side of the screen. 3. Click on a defined Role. The Create a New Role form changes to the Editing Role form.
14 C3433M (3/07) EDIT PROFILE SCREEN The Edit Profile screen gives a user permission to modify his/her account. They can change/edit the information in the following fields: • First Name • Last Name • Password Figure 9. Edit Profile Screen HELP SCREEN For help with the system select the Online help menu.
C3433M (3/07) 15 How to Use the Device Utility Use the Device Utility software to identify the IP address, check the status of the device, and update firmware. Figure 10. Pelco Device Utility Software INSTALLING THE IP110 DEVICE UTILITY T o install the IP110 Device Utility software, complete the following steps: 1.
16 C3433M (3/07) UPDATING FIRMWARE IMPORT ANT : Perform system upgrades only when necessary . Firmware upgrades do not need to be performed if the system is operating properly . Updated firmware and language files can be uploaded to the IP110 Camclosure.
C3433M (3/07) 17 4. Select the file to upload and then click the open button. Figure 12. Select File 5. The Perform Update dialog box opens, do one of the following: • Click OK to accept. • Click Cancel to close the dialog box. Figure 13. Perform Update 6.
18 C3433M (3/07) DEVICE UTILITY: ACCESSING THE CAMERA T o access the IP110 using the Device Utility , do the following: 1. Open the Pelco Device Utility . 2. Select the device to view , and then double click on the listed device. The Login screen opens.
C3433M (3/07) 19 T roubleshooting Problem Possible Cause Suggested Remedy No video PoE power issue • Check CA T 5 cable connection. • Check PoE injector power .
20 C3433M (3/07) Image quality Image not focused Adjust the field of view and the focus. 15 ips quality bad In some networks with high latency , the maximum frame rate may not be attainable. 30 ips not available The IP110 only supports MJPEG at rate up to 15 ips for NTSC camera modules where applicable.
C3433M (3/07) 21 Specifications GENERAL Pan/T ilt Adjustment Manual Pan 360° T ilt 80° (20° to 100° range) Rotation 360° Construction Aluminum with steel camera mounting bracket and polycarbonate dome Cable Entry One 0.75-inch (1.91 cm) NPT threaded opening on side; two 0.
22 C3433M (3/07) ENVIRONMENT AL Environment Low temperature, indoor/outdoor Operating T emperature -50° to 122°F (-46° to 50°C); de-ices to 25°F (-4°C) Thermostat Operation Heater is thermostatically controlled to activate <41°F (<5°C) CAMERA Service Connector 3-conductor , 2.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
Australia | Canada | Finland | France | Germany | Italy | Macau | The Netherlands | Russia | Singapore South Africa | Spain | Sweden | United Arab Emirates | United Kingdom | United States Worldwide H.
Ein wichtiger Punkt beim Kauf des Geräts Pelco C3433M (3/07) (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pelco C3433M (3/07) noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pelco C3433M (3/07) - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pelco C3433M (3/07) reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pelco C3433M (3/07) erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pelco C3433M (3/07) besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pelco C3433M (3/07) verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pelco C3433M (3/07). Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pelco C3433M (3/07) gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
