Benutzeranleitung / Produktwartung Z70A des Produzenten Asus
Zur Seite of 74
E1825c / Dec 2004 Notebook PC Hardware User ’ s Manual.
Safety Statements Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undes- ired operation.
3 Safety Statements Nordic Cautions (for Notebook PC with Lithium-Ion Battery) CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer . Dispose of used batteries according to the manufacturer ’ s instructions.
4 Safety Statements Safety Statements The following safety precautions will increase the life of the Notebook PC. Follow all precautions and instructions. Except as described in this manual, refer all servicing to qualified personnel. Do not use damaged power cords, accessories, or other peripherals.
5 T ransportation Precautions T o prepare the Notebook PC for transport, you should turn it OFF and disconnect all external periph- erals to prevent damage to the connectors . The hard disk drive’ s head retracts when the power is turned OFF to prevent scratching of the hard disk surface during transport.
6 Danish Dutch English Finnish French German Greek Italian Portuguese Spanish Swedish CTR 21 Approval (for Notebook PC with built-in Modem) Safety Statements.
7 Safety Statements UL Safety Notices Required for UL 1459 covering telecommunications (telephone) equipment intended to be electrically connected to a telecommunication network that has an operating .
8 Contents 1. Introducing the Notebook PC ................................................................ 1 1 About This User ’s Manual ........................................................................................ 12 Notes For This Manual .
9 Instant Launch Keys and Status Indicators .............................................................. 36 Instant Launch Keys ............................................................................................ 36 Status Indicators (above keyboard) .
10 Appendix ..................................................................................................... 59 Optional Accessories ................................................................................................ 60 USB Hub (Optional) .
11 1. Introducing the Notebook PC About This User’s Manual Notes For This Manual Preparing your Notebook PC.
12 1 Introducing the Notebook PC About This User ’ s Manual Y ou are reading the Notebook PC User ’ s Manual. This User ’ s Manual provides information on the various components in the Notebook PC and how to use them. The following are major sections of this User ’ s Manuals: 1.
13 Introducing the Notebook PC 1 Preparing your Notebook PC These are only quick instructions for using your Notebook PC. Read the later pages for detailed infor - mation on using your Notebook PC. 1. Install the battery pack 3. Open the Display Panel 4.
14 1 Introducing the Notebook PC.
15 2. Knowing the Parts Top Side Bottom Side Right Side Left Side Rear Side Front Side.
16 2 Knowing the Parts T op Side Refer to the diagram below to identify the components on this side of the Notebook PC. Details are given starting from the top and going clockwise. Display Panel Latch A spring-loaded latch on the front of the Notebook PC locks the display panel in the closed position when the Notebook PC is not in use.
17 Knowing the Parts 2 Status Indicators See Section 3 for details.. Touchpad and Buttons The touchpad with its buttons is a pointing device that provides the same functions as a desktop mouse. A software-controlled scrolling function is available after setting up the included touchpad utility to allow easy W indows or web navigation.
18 2 Knowing the Parts Bottom Side Refer to the diagram below to identify the components on this side of the Notebook PC. Details are given starting from the top and going clockwise. IMPORT ANT! The bottom of the Notebook PC can get very hot. Be careful when han- dling the Notebook PC while it is in operation or recently been in operation.
19 Knowing the Parts 2 Hard Disk Drive Compartment The hard disk drive is secured in a compartment. Hard disk drive upgrades are to be done by authorized service centers or dealers only . Battery Lock The spring loaded latch automatically locks the battery pack when inserted.
20 2 Knowing the Parts Right Side Refer to the diagram below to identify the components on this side of the Notebook PC. Electronic Eject, Emergency Eject The optical drive eject has an electronic eject button for opening the tray .
21 Knowing the Parts 2 Left Side Refer to the diagram below to identify the components on this side of the Notebook PC. 1394 Port IEEE1394 is a high speed serial bus like SCSI but has simple connections and hot-plugging capabilities like USB. The interface IEEE1394 has a bandwidth of 100-400 Mbits/sec and can handle up to 63 units on the same bus.
22 2 Knowing the Parts Rear Side Refer to the diagram below to identify the components on this side of the Notebook PC. 2 .0 USB Port (2.0/1.1) The Universal Serial Bus is compatible with USB 2.
23 Knowing the Parts 2 Modem Port The RJ-1 1 modem port with two pins is smaller than the RJ-45 LAN port and supports a standard telephone cable. The internal modem supports up to 56K V .90 transfers. The built-in connector allows convenient use without additional adapters.
24 2 Knowing the Parts Front Side Refer to the diagram below to identify the components on the front side of the Notebook PC. CD Control Buttons See Section 3 for details. Display Panel Latch A spring-loaded latch on the front of the Notebook PC locks the display panel in the closed position when the Notebook PC is not in use.
25 3. Getting Started Using the Battery Pack Operating Systems Power Connection Powering ON The Notebook PC Power Management Restarting or Rebooting Powering OFF The Notebook PC Using the Keyboard Ins.
26 3 Getting Started Using the Battery Pack Installing and Removing the Battery Pack Y our Notebook PC may or may not have its battery pack installed. If your Notebook PC does not have its battery pack installed, use the following procedures to install the battery pack.
27 Getting Started 3 Charging the Battery Pack Before you use your Notebook PC on the road, you will have to charge the battery pack. The battery pack begins to charge as soon as the Notebook PC is connected to external power . Fully charge the battery pack before using it for the first time.
28 3 Getting Started 3 2 1 W ith the AC power cord connected to the AC-DC converter , connect the AC power cord to an AC outlet (preferably with surge-protection) and then connect the DC plug to the Notebook PC.
29 Getting Started 3 The Power-On Self T est (POST) When you turn ON the Notebook PC, it will first run through a series of software-controlled diagnostic tests called the Power-On Self T est (POST). The software that controls the POST is installed as a permanent part of the Notebook PC’ s architecture.
30 3 Getting Started Power Management - “Stand By” & “Hibernate” Power management settings can be found in the W indows control panel. The following shows the power options properties in W indows. Y ou can define “Stand By” or “Shut down” for closing the display panel, pressing the power button, or activating sleep mode.
31 Getting Started 3 Restarting or Rebooting After making changes to your operating system, you may be prompted to restart the system. Some installation processes will provide a dialog box to allow restart. T o restart the system manually: Click the Start button and select Shut Down | and choose Restart .
32 3 Getting Started Powering OFF the Notebook PC In W indows XP , the Notebook PC can be powered OFF by using Start | Shut Down... | T urn off (or Shut down) .
33 Getting Started 3 Using the Keyboard Colored Hot Keys The following defines the colored hot keys on the Notebook PC’ s keyboard. The colored commands can only be accessed by first pressing and holding the function key while pressing a key with a colored command.
34 3 Getting Started Keyboard as a Numeric Keypad The numeric keypad is embedded in the keyboard and consists of 15 keys that make number intensive input more convenient. These dual-purpose keys are labeled in orange on the key caps. Numeric as- signments are located at the upper right hand corner of each key as shown in the figure.
35 Getting Started 3 Keyboard as Cursors The keyboard can be used as cursors while Number Lock is ON or OFF in order to increase navigation ease while entering numeric data in spreadsheets or similar applications. With Number Lock OFF , press and one of the cursor keys shown below .
36 3 Getting Started Instant Launch Keys Email Launch Key Pressing this button will launch your Email application while W indows is running. Internet Launch Key Pressing this button will launch your Internet browser application while W indows is running.
37 Getting Started 3 Status Indicators (above keyboard) Drive Activity Indicator Indicates that the Notebook PC is accessing one or more storage device(s) such as the hard disk. The light flashes proportional to the access time. Number Lock Indicates that number lock [Num Lk] is activated when lighted.
38 3 Getting Started Status Indicators (top cover) Power Indicator The green LED lights to indicate that the Notebook PC is turned ON and blink when the Notebook PC is in the Suspend-to-RAM (Standby) mode. This LED is OFF when the Notebook PC is OFF or in the Suspend-to-Disk (Hibernation) mode.
39 Getting Started 3 CD Player Control Buttons and Indicator There are several CD control buttons integrated externally on the Notebook PC for convenient CD playing. The buttons activate and control your operating system’ s audio player when the Notebook PC is ON.
40 3 Getting Started.
41 4. Using the Notebook PC Pointing Device Optical Drive Flash Memory Card Reader PC Card (PCMCIA) Socket Modem and Network Connections IR Wireless Communication AC Power System Battery Power System .
42 4 Using the Notebook PC Using the T ouchpad Light pressure with the tip of your finger is all that is required to operate the touchpad. Because the touchpad is electrostatic sensitive, objects cannot be used in place of your fingers.
43 Using the Notebook PC 4 Double-clicking/Double-tapping - This is a common skill for launching a program directly from the corresponding icon you select. Move the cursor over the icon you wish to execute, press the left button or tap the pad twice in rapid succession, and the system launches the corresponding program.
44 4 Using the Notebook PC Caring for the T ouchpad The touchpad is pressure sensitive. If not properly cared for , it can be easily damaged. T ake note of the following precautions. • Make sure the touchpad does not come into contact with dirt, liquids or grease.
45 Using the Notebook PC 4 Optical Drive Inserting an optical disc 1. While the Notebook PC’ s power is ON, press the drive’ s eject button and the tray will eject out partially . 2. Gently pull on the drive’ s front panel and slide the tray completely out.
46 4 Using the Notebook PC A CD drive letter should be present regardless of the presence of a CD disc in the drive. After the CD is properly inserted, data can be accessed just like with hard disk drives; except that nothing can be written to or changed on the CD.
47 Using the Notebook PC 4 PC Card (PCMCIA) Socket The Notebook PC supports PC Cards (or sometimes referred to as PCMCIA cards) to allow expansion like PCI cards on desktop computers. This allows you to customize your Notebook PC to meet a wide range of application needs.
48 4 Using the Notebook PC Inserting a PC Card (PCMCIA) 1. Press in the toggle eject button and release. The recessed spring loaded toggle button will extend when pushed in and released. 2. Press the extended button again to eject the PC Card. Carefully pull the ejected PC card out of the socket.
49 Using the Notebook PC 4 Flash Memory Card Reader Normally a PCMCIA memory card reader must be purchased separately in order to use memory cards from devices such as digital cameras, MP3 players, mobile phones, and PDAs.
50 4 Using the Notebook PC NOTE: The built-in modem and network cannot be installed later as an upgrade. Mo- dem and/or network can be installed as a PC card (PCMCIA). Modem and Network Connections The built-in modem and network model comes with both an RJ-1 1 and an RJ-45 port.
51 Using the Notebook PC 4 CAUTION: For electrical safety concerns, only use telephone cables rated 26A WG or higher . (see Glossary for more information) NOTE: When you are connected to an online service, do not place the Notebook PC in suspend (or sleep mode) or else you will disconnect the modem connection.
52 4 Using the Notebook PC Network Hub or Switch Network cable with RJ-45 connectors This is an example of the Notebook PC connected to a Network Hub or Switch for use with the built-in Ethernet controller .
53 Using the Notebook PC 4 AC Power System The Notebook PC power is comprised of two parts, the power adapter and the battery power system. The power adapter converts AC power from a wall outlet to the DC power required by the Notebook PC. The battery pack consists of a set of battery cells housed together .
54 4 Using the Notebook PC W ARNING! Suspend-to-RAM (STR) does not last long when the battery power is de- pleted. Suspend-to-Disk (STD) is not the same as power OFF . STD requires a small amount of power and will fail if no power is available due to complete battery deple- tion or no power supply (e.
55 Using the Notebook PC 4 Power Management Modes The Notebook PC has a number of automatic or adjustable power saving features that you can use to maximize battery life and lower T otal Cost of Ownership (TCO). Y ou can control some of these fea- tures through the Power menu in the BIOS Setup.
56 4 Using the Notebook PC Thermal Power Control There are three power control methods for controlling the Notebook PC’ s thermal state. These power control cannot be configured by the user and should be known in case the Notebook PC should enter these states.
57 Using the Notebook PC 4 Notebook PC Upgrades System Memory Expansion Additional memory will increase application performance by decreasing hard disk access.
58 4 Using the Notebook PC.
59 Appendix Optional Accessories Optional Connections Internal Modem Compliancy Glossary Notebook PC Information.
60 A Appendix Optional Accessories These items, if desired, come as optional items to complement your Notebook PC. USB Hub (Optional) Attaching an optional USB hub will increase your USB ports and allow you to quickly connect or disconnect many USB peripherals through a single cable.
61 Appendix A Optional Accessories (Cont.) These items, if desired, come as optional items to complement your Notebook PC. Wireless LAN Cardbus Card or USB The SpaceLink™ Cardbus Card is a dual band (IEEE 802.11a/b) wireless LAN adapter that fits into a Notebook PC’ s PCMCIA T ype II slot with Cardbus support.
62 A Appendix W ARNING! T o prevent system failures, use (Safely Remove Hardware) on the taskbar before disconnecting the USB floppy disk drive. Eject the floppy disk before transporting the Notebook PC to prevent damage from shock. USB Keyboard and Mouse Attaching an external USB keyboard will allow data entry to be more comfortable.
63 Appendix A Monitor Out Connection Attaching an optional VGA/LCD monitor is just like that of a standard desktop PC (some configu- rations may require additional display driver set- tings. Y ou can view the Notebook PC display panel while simultaneously allowing others to view the external monitor .
64 A Appendix Optional Connections (Cont.) These items, if desired, may be purchased from third-parties. IEEE1394 Connection 1394 is a high speed serial bus like SCSI but has simple connections and hot-plugging capabilities like USB.
65 Appendix A DVD-ROM Drive Information The Notebook PC comes with an optional DVD-ROM drive or a CD-ROM drive. In order to view DVD titles, you must install your own DVD viewer software. Optional DVD viewer software may be purchased with this Notebook PC.
66 A Appendix Internal Modem Compliancy The Notebook PC with internal modem model complies with JA TE (Japan), FCC (US, Canada, Korea, T aiwan), and CTR21. The internal modem has been approved in accordance with Council Decision 98/ 482/EC for pan-European single terminal connection to the public switched telephone network (PSTN).
67 Appendix A This table shows the countries currently under the CTR21 standard. Country Applied More T esting Austria 1 Ye s N o Belgium Y es No Czech Republic No Not Applicable Denmark 1 Ye s Ye s F.
68 A Appendix Glossary ACPI (Advanced Configuration and Power Management Interface) Modern standard for reducing power usage in computers. APM (Advanced Power Management) Modern standard for reducing power usage in computers.
69 Appendix A BIOS (Basic Input/Output System) BIOS is a set of routines that affect how the computer transfers data between computer components, such as memory , disks, and the display adapter . The BIOS instructions are built into the computer’ s read-only memory .
70 A Appendix DVD is essentially a bigger , faster CD that can hold video as well as audio and computer data. W ith these capacities and access rates, DVD discs can provide you with dramatically-enhanced high-color , full-motion videos, better graphics, sharper pictures, and Dolby ® Digital Surround for a theater -like experience.
71 Appendix A Laser Classifications As lasers became more numerous and more widely used, the need to warn users of laser hazards be- came apparent. T o meet this need, laser classifications were established.
72 A Appendix POST (Power On Self Test) When you turn on the computer , it will first run through the POST , a series of software-controlled diagnostic tests. The POST checks system memory , the motherboard circuitry , the display , the key- board, the diskette drive, and other I/O devices.
73 Appendix A.
74 A Appendix Notebook PC Information This page is provided for recording information concerning your Notebook PC for future reference or for technical support.
Ein wichtiger Punkt beim Kauf des Geräts Asus Z70A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Asus Z70A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Asus Z70A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Asus Z70A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Asus Z70A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Asus Z70A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Asus Z70A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Asus Z70A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Asus Z70A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
