Benutzeranleitung / Produktwartung C10DN des Produzenten Pelco
Zur Seite of 32
INSTALLATION/OPERATION C2944M-G (6/09) Day/Night, Ultra High Resolution C10DN Series Camera.
2 C2944M-G (6/09) Contents Important Safe ty Instruct ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Regulatory Notices .
C2944M-G (6/09) 3 List of Illustrations 1 C10DN Series Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2 DC Drive Auto Iris Lens Connector .
4 C2944M-G (6/09) WAR N I NG : TO PREVENT RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS CA MERA TO RAIN OR MOISTURE. PRECAUTION: DO NOT REMOVE ANY COVER WHIL E THE CAMERA IS OPERA TING. P AL: USE ONL Y RECOMMEN DED POWER SUPPL Y , 220 TO 240 VAC, 50 Hz. CAUTION: LENS MOUNT OF THE CAMERA IS “CS” MOUNT .
C2944M-G (6/09) 5 Important Safety Instructions 1. Read Instruct ions. All the safety and oper ating instructions should be read before the camera is oper ated. 2. Retain Instruct ions. The safety and operating instructions should be ret ained for future referen ce.
6 C2944M-G (6/09) Regulatory Notices This device co mplies with Pa rt 15 of th e FCC Rules. Oper ation is subjec t to the following two co nditions: (1) this device may n ot cause ha rmful interference, and (2 ) this device must accept any interfere nce received, including interfere nce that may cause undesired operat ion.
C2944M-G (6/09) 7 Description The C10DN Ser ies camera is Pelco’ s smallest da y/night camera. It s day/ni ght technology provides ou tstanding performance over a wid e range of lighting conditions.
8 C2944M-G (6/09) Camera Layout Figure 1. C10DN Series Camera ì Camera Mount: Use the top or botto m mount hole. The maximum thread dept h is 0.25 inches (6.4 mm); refer to Camera Mounting on page 10. î Back Focus Locking Screw: Use a 1.5-mm Alle n wrench t o adjust th e back focus (refer to Lens Focusing on page 25).
C2944M-G (6/09) 9 Installation LENS MOUNTING The C10DN Series ca mera supports both manu al and auto iris lenses, e ither fix ed focal len gth or vari focal. It als o supports bot h DC and video drive lenses. It automatically se nses an auto iris lens a s soon as you plug in the connector .
10 C2944M-G (6/09) CAMERA MOUNTING The C10DN Serie s camera can b e mounted fro m either the t op or bottom, depending on the type of camera mount u sed in your in stal lation. U se a standard 1 /4-20 screw. The maximum thread dept h (top) is 0.1 88 inches (4 .
C2944M-G (6/09) 11 CONNECTING POWER The C10DN-6 and C1 0DN-6X are designed to ope rate from either a 12 VDC or a 24 VA C power source. The camera auto matically senses power type. Use only a Class 2 isolated powe r source th at can supply 12 VDC ±15% or 24 VAC ±15%, 50/60 Hz.
12 C2944M-G (6/09) CONNECTING AC POWER The C10DN Series camer a requires a power sup ply of 24 VAC ±15% 20.4–27.6 V AC, 50/60Hz. Make sure the power supply has a minimum rating of 270 mA.
C2944M-G (6/09) 13 CONNECTING DC POWER The C10DN Series camer a requires a power supp ly of 12 VDC ±15 % 10.2–13.8 VD C. Make sure the power sup ply has a mi nimum rating o f 390 mA. T o co nnect DC power refer t o Figure 5, and then complete th e followi ng steps: 1.
14 C2944M-G (6/09) CONNECTING DAY/NIGHT FILTER CONTROL In some installations, high in frared (IR) illuminati on or other light sources may interfere with th e camera’ s automatic day/nig ht mode operation. Use an externa l day/night f ilter switch, such as a ph otosensor , to keep the c amera from co nstantly switching filter s.
C2944M-G (6/09) 15 Accessing the Setup Menus Use the five-position butt on controller on the side panel of the camera to ac cess and navigate the on-screen display (OSD) men u s (refer to Figure 7 and T able D). Figure 7. Side Panel Button Options T o display a menu, comple te the following s teps: 1.
16 C2944M-G (6/09) Setup Menus The C10DN Series ca mera uses set up menus inst ead of har dware switches for config uring the ca mera. As a re sult, you h ave more o p tions for customizing the camera for its specific application. NOTE: After you cust omize any as pect of the C10DN Series camera , be sure to save your custom settings.
C2944M-G (6/09) 17 MAIN MENU The following sections de scribe each menu and the sett ings assoc iated with tha t menu. The sa mple screens in each section show the de fault sett ings.
18 C2944M-G (6/09) PROFILES Use this opt ion to select a profile or save custom s ettings. U se profiles for faster installatio n or to adjust came ra settings q uickly for changing lig ht conditio ns. The defa ult sett ing is DA Y&NIGHT . The C10DN Series camera offers three predefin ed profiles and one custom, or user -defin able, profile.
C2944M-G (6/09) 19 EXPOSURE SETTINGS Select this option to config ure the exposure settings for th e C10DN Series camera. AUTO EXPOSURE The automat ic exposure feature au tomaticall y adjusts th e electronic shutter an d mechanical iris to set the correct exposu re.
20 C2944M-G (6/09) DC IRIS LEVEL Select this opt ion to adjust th e electron ic propertie s of the DC drive au to iris lens to th e auto iris ele ctronic prop erties of the camera . Perform this procedure be fore using th e camera or each time you cha nge the lens.
C2944M-G (6/09) 21 DETECT T IME The camera regular ly checks the bright ness level. When the br ig htness level crosses th e switch threshold a nd lasts long er than th e D&N DETECTION setting, th e ca mera switches the filter .
22 C2944M-G (6/09) WHITE BALANCE The C10DN Se ries camer a offers th ree white ba lance opt ions. White bal ance setting s define how the came ra proces ses video image s to rend er true colors in a scene. White ba lance is especially effective in scenes wi th changi ng color temperatures.
C2944M-G (6/09) 23 MASKING Masking lets you bl ock certain areas of a came ra scene. A maximum of eight masks can b e defined. NOTE: If you add a ninth mask , the camera erases the first mask. Y ou cannot config ure mor e than eight masks. MASK: Use this option to enable or disab le masking; the default setting is OFF .
24 C2944M-G (6/09) SAVE AS CUSTOM Select this o ption to cr eate and sa ve a custom profile. Wh enever you open and make changes to the EXPOSURE SET and FUNCTI ON SET menus, the camera stores the setti ngs. These sett ing can be saved as a custom profile.
C2944M-G (6/09) 25 Lens Focusing After mounting the lens, you must focus your C10D N Series camera. Y ou will ad just both the back focus (on th e camera) and the f ine focus (on the lens). NOTE: The back fo cus has alrea dy been adju sted using a standard CS- mount len s.
26 C2944M-G (6/09) 6. V arifocal lens only: a. Set the varifocal to wide (W) and the lens fo cal length to far ( ∞ ). b. Adjust the back focu s: (1) Use a 1.5-mm Allen wrench to lo osen th e back fo cu s locking screw . (2) T urn the lens until the image is focused .
C2944M-G (6/09) 27 Camera Synchronization Camera synchr onization may aff ect installat ions that u se two or more AC power supplies for multiple cameras. Due to differe nt p ower phas es, a brief ver tical roll may appear o n the moni tor when s witching be tween camera s.
28 C2944M-G (6/09) Manual White Balance Calibration In some installations, use manu al white balance to render the most accur ate image color possible. Mixed color applications may affect the amount of colo r adjustme nt. For examp le, a small wh ite object o n a large bl ue surface may have a r eddish tint .
C2944M-G (6/09) 29 Specifications GENERAL Day/Night Operatio n Day Infrared (IR) cut filte r Night BK-7 glass, same optical displacement as day Imaging Device 1/3-inch interline tr ansfer CCD Picture Elements NTSC 768 (H) x 494 (V) (approx. 380 k) P AL 752 (H) x 582 (V) (approx.
30 C2944M-G (6/09) ENVIRONMENT AL Operating T emperature 14° to 122°F (-1 0° to 50°C) Storage T emperature -4° to 140°F (-20° to 60°C) Operating H umidity 20% to 80% (nonconden sing) Storage Humid ity 20% to 90% (nonconden sing) PHYSICAL Dimensions C10DN-6/C10DN-6X 2.
The materials used in the manufacture of this documen t and it s components are compliant to the requirements of Directive 2002/9 5/EC. This equipment contains elec trical or electronic components tha.
Pelco, Inc. Worldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el (800) 289-9100 Fax (800) 289-9150 International T el +1 (559) 292-1981 Fax +1 (559) 348-1120 www .
Ein wichtiger Punkt beim Kauf des Geräts Pelco C10DN (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Pelco C10DN noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Pelco C10DN - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Pelco C10DN reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Pelco C10DN erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Pelco C10DN besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Pelco C10DN verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Pelco C10DN. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Pelco C10DN gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
