Benutzeranleitung / Produktwartung 3086FR des Produzenten Patton electronic
Zur Seite of 172
Model 3086FR G.SHDSL Frame Relay over AT M IAD User Guide Sales Office: +1 (301) 97 5-1000 Techni cal Su ppor t: +1 (301) 97 5-1007 E-mail: suppor t@patton.com WWW: www .patton.com Part Number: 07M3086FR-UG, Rev . C Revised : February 16, 2012 Impor tant This is a Class A de vice and is intended for use in a light ind ustrial environment.
Patton Electronics Company , Inc. 7622 Ric kenbacker Drive Gaithersburg , MD 20879 USA tel: +1 (301) 97 5-1000 fax: +1 (301) 869 -9293 support: +1 (301) 975-10 07 web: www.patton .com e-mail: support@p atton.com Copyright © 2012, Patton Electr onics Company .
3 Contents Con tent s .... ...... ...... ...... ......... ..... ...... ...... ...... ........ ...... ...... ...... ......... ..... ...... ...... ...... ......... ..... ...... ...... ...... ......... 3 About this guide ....... ...... ...... ........ ..
4 Model 3086FR ATM IAD User Guide Conte nts V.35 and X. 21 port s ................. ........... ........... ................. ........... ............ ........... ........... ................. ........... ............ . 39 Connecting t he 3086F R serial p ort to a DTE .
5 Model 3086FR ATM IAD User Guide Conte nts Frame Relay (E thernet- based) op erations ........ ........... ................. ............ ........... ........... ........... ................. ............ . 74 Frame Rel ay Con figurat ion O ptions ..
6 Model 3086FR ATM IAD User Guide Conte nts 12 Monitoring Status ........ ...... ..... ...... ...... ......... ...... ..... ...... ......... ...... ...... ..... ...... ......... ...... ..... ...... ...... ......... ..... 135 Status LEDs ............. .
7 Model 3086FR ATM IAD User Guide Conte nts Management ..... ........... ............ ................ ............ ........... ........... ............ ................. ........... ......... .. ........... ...........156 Security .. ................
8 Model 3086FR ATM IAD User Guide Conte nts.
9 About this guide This guid e descri bes inst alling and co nfiguring a Pat ton Electroni cs Model 3 086FR Frame Relay to ATM Conv erter. Th e inst ructio ns in thi s guid e are bas ed on th e foll o.
10 Model 3086FR ATM IAD User Guide About this guide Precau tions Notes and ca ution s, wh ich hav e the fol lowin g mean ings, are used throughout this guide to help you become aware of potential Frame Relay to ATM C onverter problems. Warnings relate to pe rsonal injury issues, and Cautions refer to potential propert y damage.
11 Model 3086FR ATM IAD User Guide About this guide Safety when working wi th electricity Factory default parameters The M odel 3086FR Frame Relay to AT M Converter has the following fac tory default parameters. • Ethernet IP add ress: 192.168. 200.
12 Model 3086FR ATM IAD User Guide About this guide T ypographical con ventions used in this d ocument This section de scribes th e typographical con ventions and terms use d in this guide.
13 Chapter 1 General I nformation Chapter cont ents Model 3086FR Frame Rel ay over ATM IAD overvi ew .......... ........... ........... ............ ................ ............ ........... .......14 General attributes ............... ........... ...
Model 3086FR Frame Relay over ATM IAD overview 14 Model 3086FR ATM IAD User Guide 1 • Ge nera l Info rma tion Model 3086FR Frame Relay over A TM IAD over view The Mode l 3086FR is a G.SHDSL Int egrated Access Devi ce that combines hi gh speed IP routing and access via ATM /PPP.
Model 3086FR Frame Relay over ATM IAD overview 15 Model 3086FR ATM IAD User Guide 1 • Ge nera l Info rma tion • Twelve fro nt panel LE Ds ind icate , DSL WAN , Sync Ser ial , Ethe rnet LAN speed an d sta tus, and Tes t mode status. • Convenient and standard RJ connectors for Ethernet, Line, and Console.
Model 3086FR Frame Relay over ATM IAD overview 16 Model 3086FR ATM IAD User Guide 1 • Ge nera l Info rma tion • DHCP relay agent (RFC 2132/RFC 1542) with 8 ind ividual add ress pools . • DNS Relay with primary and secondary Name Server selection.
Model 3086FR Frame Relay over ATM IAD overview 17 Model 3086FR ATM IAD User Guide 1 • Ge nera l Info rma tion • uPNP control led de vice fo r seamle ss netw orked de vi ce int erconnectiv ity and Windows XP integrat ion. • IGMPv2 Proxy support (RFC 22 36).
Model 3086FR Frame Relay over ATM IAD overview 18 Model 3086FR ATM IAD User Guide 1 • Ge nera l Info rma tion Front Panel Status LED s, T e st Mode Switche s, and Conso le Por t The IpRocketLink routers have all status LEDs and console port on the front panel of the un it, and all other electrical connections are located on the rear panel.
Model 3086FR Frame Relay over ATM IAD overview 19 Model 3086FR ATM IAD User Guide 1 • Ge nera l Info rma tion The t est m ode switches are : • Normal, Local, and Remote Loopbacks • Normal, 511, and 511E pse udo-random bi t patte rns Table 3. Status LED descriptions Powe r Green ON indicates that pow er is applied .
Model 3086FR Frame Relay over ATM IAD overview 20 Model 3086FR ATM IAD User Guide 1 • Ge nera l Info rma tion Console po rt (outline d in red) The unshie lded RJ-45 RS-232 c onsole DCE po rt (E IA-5.
Model 3086FR Frame Relay over ATM IAD overview 21 Model 3086FR ATM IAD User Guide 1 • Ge nera l Info rma tion Ethernet por t (outlined in gr een) Shielded RJ-45 10B ase-T/100Base-T X Ethernet port using pins 1,2,3, & 6. See MDI-X switch f or hub or trans - ceiver configuration.
Model 3086FR Frame Relay over ATM IAD overview 22 Model 3086FR ATM IAD User Guide 1 • Ge nera l Info rma tion.
23 Chapter 2 Product Over view Chapter cont ents Product Overview ..................... ................ ............ ........... ........... ............ ................. ........... ........... ................. .......24 Applica tions Ov erview ..
Product Overview 24 Model 3086FR ATM IAD User Guide 2 • Pro duct Ove rview Product Overview The Model 3086FR IAD operates as a Frame Relay to ATM co nverter (via serial port), as a bridge or a router and has three ports f or communicati on: • The Et hernet port—C onnects to the LAN side of the c onnection • The Line port—Pro vides the G.
Product Overview 25 Model 3086FR ATM IAD User Guide 2 • Pro duct Ove rview FR over ATM The Model 3086FR primary function is the conversion of legacy ports r unning FR traffic to ATM. In many instan ces, cust omers h ave old er but func tionin g equipm en t, and need to connect to newer technology offer - ings fro m service provid ers or t elcos.
Product Overview 26 Model 3086FR ATM IAD User Guide 2 • Pro duct Ove rview.
27 Chapter 3 Quick Star t Installation Chapter cont ents Har dw ar e in s tal la ti on ............... ........... ........... ........... ............ ................. ........... ........... ........... ................. ............ . 28 What you wi ll need .
Hardware installation 28 Model 3086FR ATM IAD User Guide 3 • Quick Start Installation Hardware instal lation If you are already famil iar with Mo del 3086FR Frame Relay to ATM Convert er installati on and configurat ion, this chapter will enab le you to finish the job qui ckly.
Hardware installation 29 Model 3086FR ATM IAD User Guide 3 • Quick Start Installation 2. Verify that the AC po wer cord i ncluded w ith your 3 086FR is compat ible with local st andards. If it is not, refer to C hapter 14, “Contacting Patton for assistance” on page 27 to find out ho w to replace it with a comp atible power cord.
Hardware installation 30 Model 3086FR ATM IAD User Guide 3 • Quick Start Installation IP ad dres s Quic k Sta rt modif ic ati on The first parame ter to change is the IP ad dress from the default IP addres s of 1 92.168.1.1/24 ( for the CP units) or 192.
Hardware installation 31 Model 3086FR ATM IAD User Guide 3 • Quick Start Installation The Mode l 3086FR home p age dis plays (se e figure 3 ). SS Figure 3. Model 3086FR ho me page The Model 3086FR menu struct ure for models RIC and RID is sho wn in figu re 4 on page 32, the menu struc - ture for Model RIK is sho wn in figure 5 on page 33 .
Hardware installation 32 Model 3086FR ATM IAD User Guide 3 • Quick Start Installation Figure 4. Model 3086FR Menu Structure ( Models RIC and RID).
Hardware installation 33 Model 3086FR ATM IAD User Guide 3 • Quick Start Installation Figure 5. Model 3086F R Menu Structure (Mode l RIK).
Hardware installation 34 Model 3086FR ATM IAD User Guide 3 • Quick Start Installation.
35 Chapter 4 Connecting the DSL and data por ts Chapter cont ents Introd ucti on ...... ................. ........... ........... ............ ................. ........... ........... ............ ........... ........... ........... ............ . 36 DSL port .
Introduction 36 Model 3086FR ATM IAD User Guide 4 • Connecting the DSL and data ports Intr oduction The model 308 6FR comes with a DSL port, 2 data ports: serial (V.
TDM Port 37 Model 3086FR ATM IAD User Guide 4 • Connecting the DSL and data ports To functi on properly, t he Model 3086FR needs one twisted p air of me tallic wire. Th is twist ed pair must be unconditioned, dry, metall ic wire, betwee n 19 (. 9mm) and 26 AWG (.
TDM Port 38 Model 3086FR ATM IAD User Guide 4 • Connecting the DSL and data ports Figure 8. Rear panel power and interface c onnectors.
V.35 and X.21 ports 39 Model 3086FR ATM IAD User Guide 4 • Connecting the DSL and data ports V .35 and X.21 ports The ser ial port in the 308 6FR is simple to confi gure. The V. 35 interf ace is wired as a DCE, t he X.21 int erface can be configured as a DCE (factory default), or as a DTE via internal configur ation jumper.
V.35 and X.21 ports 40 Model 3086FR ATM IAD User Guide 4 • Connecting the DSL and data ports 2. Locate th e small dau ghter board on the 308 6FR board between the DSL p ort (RJ- 45) connect or and the seria l port connect or ( Figure 10 shows locati on of DTE/D CE daughter board ).
T1 Interface 41 Model 3086FR ATM IAD User Guide 4 • Connecting the DSL and data ports T1 Inte r face The 3086FR e nables T 1 or E1 d evice located at custome r locati ons t o access a car rier’ s networ k over t wo wire , long reach DSL links.
E1 Interface 42 Model 3086FR ATM IAD User Guide 4 • Connecting the DSL and data ports Line Bui ld Out: Select f rom 100 ohm ( 0dB), 100 o hm (-7.5dB ), 100 ohm ( -15dB), and 10 0 ohm (-22.5 dB). For CSU/DSU appl ication u se 100 0dB option, co nsult your T1 servi ce provid er for mor e informat ion.
E1 Interface 43 Model 3086FR ATM IAD User Guide 4 • Connecting the DSL and data ports Figure 12. E1 interface with RJ-48C jack (120–ohm) and dual BNC (75-ohm) connec tors E1 Int erface Conn ectio n The 3086FR w ill usuall y connect ei ther to a l ocal E1 d evice, or to a Telco te rminated E1 line j ack.
E1 Interface 44 Model 3086FR ATM IAD User Guide 4 • Connecting the DSL and data ports Web Interface Co nfiguration Launch Inter net Explorer or s imilar web bro wser, type the IP address of the 2 603, enter username ‘ superuser’ and p assword ‘super user’.
45 Chapter 5 Configuring the DSL and serial por ts Chapter cont ents Introd ucti on ...... ................. ........... ........... ............ ................. ........... ........... ............ ........... ........... ........... ............ .
Introduction 46 Model 3086FR ATM IAD User Guide 5 • Configuring the DSL and serial ports Intr oduction Configur ation of t he 3086FR can be broken down into t he fol lowing st eps: • Confi guring .
Configur ing the DSL in terface 47 Model 3086FR ATM IAD User Guide 5 • Configuring the DSL and serial ports Intended DSL Da ta Rate DSL line rate at which you wish to connect. In a CPE to DSLAM configuration, the 3086FR (CPE) will have the DSL r ate dict ated by th e DSLAM (CO).
Configuring the DSL interface using the CLI 48 Model 3086FR ATM IAD User Guide 5 • Configuring the DSL and serial ports Line Probe Line pro be is a tool us ed to d etermine maxi mum achievabl e rate when ini tially co nnecting 3 086 to a cop per line of unknow n quality.
Configuring the DSL interface using the CLI 49 Model 3086FR ATM IAD User Guide 5 • Configuring the DSL and serial ports To enter annex B type: --> gshdsl set ghsannex AnnexB For Annex A type: --> gshdsl set ghsannex AnnexA Line Probe Thi s is no t a re qui red st ep.
Configuring the seri al port 50 Model 3086FR ATM IAD User Guide 5 • Configuring the DSL and serial ports Refer to sectio n “Config uring th e seri al port” on page 50. Configuring th e serial port This section defines the co nfiguration options availab le for the serial interface on the Model 3086FR.
Configuring the seri al port 51 Model 3086FR ATM IAD User Guide 5 • Configuring the DSL and serial ports Rx Clk Inv : normal Gain help about th e Serial Interf ace Command: seri al help This command w ill request that the system pro vide help about each of the configuration variables that are available in the serial interface.
Configuring the seri al port 52 Model 3086FR ATM IAD User Guide 5 • Configuring the DSL and serial ports W eb Inter fac e Confi guration s The seria l in terfac e ca n be co nfig ured usin g the web in terface by f ollowing the “Serial” hyper link on the web management sc reen.
53 Chapter 6 Configuring FR and A TM features Chapter cont ents Introd ucti on ...... ................. ........... ........... ............ ................. ........... ........... ............ ........... ........... ........... ............ . 55 Frame Relay N etwork (F RN) Interwo rking (FR F.
6 • Config uring FR and ATM features Model 3096RC G.SHDSL T- DAC Administrators’ Reference Guide 54 Build a new Frame Relay Transp ort ......... ........... ........... ................. ............ ........... ........... ................. .....
Introduction 55 Model 3096RC G.SHDSL T-DAC Administra tors’ Reference Guide 6 • Configur ing FR and ATM fea tures Intr oduction This chapter explains the three basi c Frame Relay (F R)/ATM config urations of the 3086FR IAD and how to configure th em.
6 • Config uring FR and ATM features Model 3096RC G.SHDSL T- DAC Administrators’ Reference Guide 56 Introduction Figure 14 is a va riation upon the previousl y describe d applicatio n. Here one end has FR equipm ent but the other l ocatio n has spe cial AT M equip ment w hich re cogniz es FR.
Frame Rel ay Netwo rk (F RN) Int erworki ng (FRF. 5) 57 Model 3096RC G.SHDSL T-DAC Administra tors’ Reference Guide 6 • Configur ing FR and ATM fea tures Observe from th e stack that a true conversion has oc curred betw een the FR and ATM networ ks.
6 • Config uring FR and ATM features Model 3096RC G.SHDSL T- DAC Administrators’ Reference Guide 58 Frame Relay Network (F RN) Interworking (FRF.5) FRN co nfigurati on optio ns The Frame Relay Netw ork Interwor king functions on the Patton Electronics Model 3086FR are def ined by ports an d channel s.
Frame Rel ay Netwo rk (F RN) Int erworki ng (FRF. 5) 59 Model 3096RC G.SHDSL T-DAC Administra tors’ Reference Guide 6 • Configur ing FR and ATM fea tures Figure 18. FRN Setup (FRF.5) link location Once FRN Setup (FRF.5) is selected (s ee figur e 18 ), the Port Level Configuration screen is displa yed (see figu re 19 ).
6 • Config uring FR and ATM features Model 3096RC G.SHDSL T- DAC Administrators’ Reference Guide 60 Frame Relay Network (F RN) Interworking (FRF.5) The screen gives an overview of the FRN connections that are available.
Frame Rel ay Netwo rk (F RN) Int erworki ng (FRF. 5) 61 Model 3096RC G.SHDSL T-DAC Administra tors’ Reference Guide 6 • Configur ing FR and ATM fea tures Pack et In form atio n scre en Figure 21 shows the pack et information that is available f or ea ch c hannel.
6 • Config uring FR and ATM features Model 3096RC G.SHDSL T- DAC Administrators’ Reference Guide 62 Frame Relay Network (F RN) Interworking (FRF.5) - Conver t : The system will conv ert the DE field receiv ed from the Fram e Relay packet into the CLPI field of the outgoin g ATM cell that is generated by the segmentati on process.
Frame Rel ay Netwo rk (F RN) Int erworki ng (FRF. 5) 63 Model 3096RC G.SHDSL T-DAC Administra tors’ Reference Guide 6 • Configur ing FR and ATM fea tures – Mgt_Port_UP : Currently the LMI on the.
6 • Config uring FR and ATM features Model 3096RC G.SHDSL T- DAC Administrators’ Reference Guide 64 Frame Relay Network (F RN) Interworking (FRF.5) CLI Configu ration Methods f or Po rt Le vel Ma nageme nt The follow ing information c an be used to con figure the Port Level information ass ociated with the FRN con- nections.
Frame Rel ay Netwo rk (F RN) Int erworki ng (FRF. 5) 65 Model 3096RC G.SHDSL T-DAC Administra tors’ Reference Guide 6 • Configur ing FR and ATM fea tures Channel Level Information: ---------------.
6 • Config uring FR and ATM features Model 3096RC G.SHDSL T- DAC Administrators’ Reference Guide 66 Frame Relay Service Inte rworking (FRF.8) port nu mber that is being c onfigu red an d then th e chan nel nu mber that is b eing c onfigu red.
Frame Relay Service Inte rworking (FR F.8) 67 Model 3096RC G.SHDSL T-DAC Administra tors’ Reference Guide 6 • Configur ing FR and ATM fea tures FRS C onfiguratio n Option s The Mode l 3086FR supp orts 64 FRF.8 connecti ons (div ided into 8 groups of 8 channels each).
6 • Config uring FR and ATM features Model 3096RC G.SHDSL T- DAC Administrators’ Reference Guide 68 Frame Relay Service Inte rworking (FRF.8) Each Group i n the le ft col umn is a hype rlink th at wi ll disp lay th e Group X Configuratio n win dow ( whe r e x is the group s elected) (se e figu re 23 ).
Frame Relay Service Inte rworking (FR F.8) 69 Model 3096RC G.SHDSL T-DAC Administra tors’ Reference Guide 6 • Configur ing FR and ATM fea tures specif ication. Se e figure 24 fo r the encaps ulation types and includes an exam ple where a Rou ted IP packe t is receiv ed on both the Fr ame Relay and ATM s ides of the co nnection.
6 • Config uring FR and ATM features Model 3096RC G.SHDSL T- DAC Administrators’ Reference Guide 70 Frame Relay Service Inte rworking (FRF.8) DE Mapping The DE Ma pping variable is u sed to determi ne how the Frame Re lay DE field (Di scard Eligi-bil ity) will be mapped to the ATM CL PI (Cell Loss Priority Indication) and vise versa.
Frame Relay Service Inte rworking (FR F.8) 71 Model 3096RC G.SHDSL T-DAC Administra tors’ Reference Guide 6 • Configur ing FR and ATM fea tures work and a VPI/VCI on the ATM netwo rk. The follo wing confi guration options are available for each channel in th e system.
6 • Config uring FR and ATM features Model 3096RC G.SHDSL T- DAC Administrators’ Reference Guide 72 Frame Relay Service Inte rworking (FRF.8) The frs set group command allows the user to setup the configuration of the group var iables. The followi ng example could be use d to set the DE Mapping variable to “co nvert”.
Frame Relay Service Inte rworking (FR F.8) 73 Model 3096RC G.SHDSL T-DAC Administra tors’ Reference Guide 6 • Configur ing FR and ATM fea tures Figure 26.
6 • Config uring FR and ATM features Model 3096RC G.SHDSL T- DAC Administrators’ Reference Guide 74 Frame Relay (Ethernet-based) operations Frame Relay (Ethernet-based) operations Ethernet-based (or basic) Frame R elay is also avai lable within the Model 3086FR.
Frame Relay (Etherne t-based) operations 75 Model 3096RC G.SHDSL T-DAC Administra tors’ Reference Guide 6 • Configur ing FR and ATM fea tures • DLCI : Thi s variable c an be set t o any positive.
6 • Config uring FR and ATM features Model 3096RC G.SHDSL T- DAC Administrators’ Reference Guide 76 Frame Relay (Ethernet-based) operations.
77 Chapter 7 Local Management Inter face Chapter cont ents Introd ucti on ...... ................. ........... ........... ............ ................. ........... ........... ............ ........... ........... ........... ............ . 78 LMI Con figurat ion Op tions .
Introduction 78 Model 3086FR ATM IAD User Guide 7 • Local M anagement Int erface Intr oduction The Frame Relay Local Management Interface ( LMI) is a mechanism that enables two separate frame relay sys - tems to co mmunicate the status of the i nterface.
LMI Configuration Options 79 Model 3086FR ATM IAD User Guide 7 • Local M anagement Int erface • ANSI_Both: The ANSI T1.617 pr otocol will be used. T he unit will o perate as both the N etwork and Us er side of the con nection. • Cisco_Network: The Cisc o LMI impleme ntation will be use d.
CLI Co nfigu rati on Meth ods 80 Model 3086FR ATM IAD User Guide 7 • Local M anagement Int erface CLI Con figurat ion Method s The fol lowing de scri bes how to c onfigure the LMI us ing the CLI. Al l LMI comma nds are co ntained unde r the “lmi” directive of the CLI interface.
Web Configuration Methods 81 Model 3086FR ATM IAD User Guide 7 • Local M anagement Int erface W eb Configuration Methods The follow ing describes how to configure the L MI using the web inter face. All LMI confi guration variabl es are contained under the “LMI Manageme nt” window found through the IWF link.
Web Configuration Methods 82 Model 3086FR ATM IAD User Guide 7 • Local M anagement Int erface.
83 Chapter 8 3086FR routed and bridged AT M connections Chapter cont ents Introd ucti on ...... ................. ........... ........... ............ ................. ........... ........... ............ ........... ........... ........... .........
Introduction 84 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s Intr oduction In addition to FR to ATM conversion and transport over DSL, the 3086FR is a full feature ATM router, allowi ng routed or br idged serv ices between the DSL int erface and t he 10/100Base -T.
DSLAM Connections with remote CPE uni ts 85 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s RFC 1483 Bridged Configuration. N o a d di t io n al I P a d d re s se s ar e ne e d ed o t he r th a n th e IP a dd r e ss c ho s en e ar l ie r .
DSLAM Connections with remote CPE uni ts 86 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s Change Terminal Type to Remote and Interface Type to atm . C lick on the Configure button. In the Action submenu und er G.SHDSL, ch ange Action to Deactivate , then cli ck on Action.
DSLAM Connections with remote CPE uni ts 87 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s 3. Go to G.SHDSL in the Config uration Menu, then the submenu Configur ation. Leave Terminal Type as Remot e , but change Interface Ty pe to atm .
DSLAM Connections with remote CPE uni ts 88 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s 2. On the Me nu, go to Co nfiguration, then to WAN Conn ections.
DSLAM Connections with remote CPE uni ts 89 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s One IP interf ace is cal led ip1 wi th an IP addres s of 192.16 8.1.1 Change the IP add ress so it i s in the same subnet as both PCs.
DSLAM Connections with remote CPE uni ts 90 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s RFC 14 83 Routed RFC 1483 provi des the s implest met hod of connecting e nd stations over an AT M network. Use r data in the form of Ethernet p ackets i s encapsul ated into AAL-5 PDUs for t ranspor t over ATM.
DSLAM Connections with remote CPE uni ts 91 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s In the Descri ption field, enter the description you wish. In this exam ple, it is called RFC 14 83 Routed . Change the configuratio n parameters to match the fo llowing.
DSLAM Connections with remote CPE uni ts 92 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s 3. Configuration Menu > Configur ation > IP Routes > Click on Cr .
DSLAM Connections with remote CPE uni ts 93 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s One IP inte rfa ce wa s call ed ip 1 wi th an IP address o f 192.168.1.1 Change the IP address so it is in the same subnet as the laptop PC.
DSLAM Connections with remote CPE uni ts 94 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s Click on Action > Select de activate fo r Action > Cl ick on the Acti on button. 2. On the Menu, go to Configuration, then to WAN C onnections.
DSLAM Connections with remote CPE uni ts 95 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s 3. Configuration Menu > Configur ation > IP Routes > Click on Cr .
DSLAM Connections with remote CPE uni ts 96 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s 4. Go to G.SHDSL in the Configurati on Menu, then the submenu Stat us. The Modem S tate sh ould be “deactivated.” (If not, go to the Action and chan ge it to deactivate .
DSLAM Connections with remote CPE uni ts 97 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s Model 3086FR (Remote—Client) Co nfiguration Steps (PPPoA Routed) 1. From the co mmand line interf ace (CLI) v ia the RS- 232 control port, fi ip list interfaces One IP interface was called ip1 with an IP ad dress of 192.
DSLAM Connections with remote CPE uni ts 98 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s In the Descri ption field, enter the description you wish. In this exam ple, it is called PPPoA Route d . Change the configuratio n parameters to match the fo llowing.
DSLAM Connections with remote CPE uni ts 99 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s –L c p M a x T e r m i n a t e : 2 –D i a l i n A u t h : n o n e – .
DSLAM Connections with remote CPE uni ts 100 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s 4. Click on E dit ‘ATM Channel.
DSLAM Connections with remote CPE uni ts 101 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s One IP interface was called ip1 with an IP ad dress of 192.16 8.1.1 Change it to an IP address whi ch is in the same su bnet as t he Deskto p PC.
DSLAM Connections with remote CPE uni ts 102 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s 2. On the Menu, go to Configuration, then to WAN Connections Delete both default W AN services already defi ned. Click on Create a new service in the main window, select PPPoA Ro uted and click o n the Confi gure button.
DSLAM Connections with remote CPE uni ts 103 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s Clic k on Conf igure . 3.
DSLAM Connections with remote CPE uni ts 104 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s –D i a l i n A u t h : pap – Dialout Username: [blank] – Dialout Password: [bla nk] – Confi rmation Pa sswor d: [blank] – Dialout Auth: none – Interface ID: 2 – Remote IP: 192.
DSLAM Connections with remote CPE uni ts 105 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s Clic k on Chang e button.
DSLAM Connections with remote CPE uni ts 106 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s 4. Click on E dit ‘ATM Channel.
DSLAM Connections with remote CPE uni ts 107 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s 5. Click on E dit ‘IP Inte rface.’ Verif y or ch ange if necess ary th e foll owing O ptions para meter s. – Ipaddr:1 92.
DSLAM Connections with remote CPE uni ts 108 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s 7. From the Con figuration Menu, click on Configuration > Authenticati on > Create a new user > enter the information fo r the following parameters in the web p age Details for the new user .
DSLAM Connections with remote CPE uni ts 109 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s 1. Now you can br ing up the web-page management syst em on your br owser by ent ering th e IP addres s of the 3086 FR. 2. On the Me nu, go to Co nfiguration, then to WAN Conn ections.
DSLAM Connections with remote CPE uni ts 110 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s 3. Retu rning t o the 308 6FR C onfigu ratio n Menu , click on Con figura tion , then IP Rout es. – Click on “Create new Ip V4 Route.
DSLAM Connections with remote CPE uni ts 111 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s 4. Go to G.SHDSL in the Config uration Menu, then the submenu Configur ation. Change Terminal Type to Centra l and Interface Type to atm .
DSLAM Connections with remote CPE uni ts 112 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s Return to Action, select S tart and click on Actio n .
DSLAM Connections with remote CPE uni ts 113 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s 3. Retu rning t o the 308 6FR C onfigu ratio n Menu , click on Con figura tion , then IP Rout es. Click on “Create new Ip V4 Route.
DSLAM Connections with remote CPE uni ts 114 Model 3086FR ATM IAD User Guide 8 • 3 086FR routed and bridged ATM connection s.
115 Chapter 9 IP Configurations Chapter cont ents IP Con figur atio ns ..................... ................ ............ ........... ........... ................. ............ ........... ........... ..... ............ .....116 Router ... ..........
IP Conf igurat ions 116 Model 3086FR ATM IAD User Guide 9 • IP Confi guration s IP Configuratio ns This chapter des cribes how to use the w eb page management pages to conf igure the router’s RIP ver sions, cre - ate a static Ip V 4Route, and confi gure the DHC P Server or Relay.
IP Conf igurat ions 117 Model 3086FR ATM IAD User Guide 9 • IP Confi guration s 1. Click on > Configuration, then > IP Routes on the Configuration Menu. 2. On the main web page en titled “Edit Routes,” click on Create new Ip V4 Route . 3. Enter the destin ation IP address in the Value field of “Destination.
IP Conf igurat ions 118 Model 3086FR ATM IAD User Guide 9 • IP Confi guration s 2. Clic k on Config ure on t he D HCP Ser ver w eb page to c han ge th e c onf igura tio n fo r any of the D HCP par am - eters.
IP Conf igurat ions 119 Model 3086FR ATM IAD User Guide 9 • IP Confi guration s 4. The Frame Relay to ATM Converter may be used as a DHCP Relay Agent if de sired. Go to > Co nfigura - tion Menu > Configurat ion > DHCP Server. Se lect DHCP Relay Agent at the botto m of the web page and click on Co nfigure.
IP Conf igurat ions 120 Model 3086FR ATM IAD User Guide 9 • IP Confi guration s DNS Relay Mode In the DNS Relay we b page, up t o 10 DNS ser ver addre sses may be added to utilize the DNS servers already being use d by the net work. 1. Select Enab led .
121 Chapter 10 Security Chapter cont ents Introd ucti on ...... ................. ........... ........... ............ ................. ........... ........... ............ ........... ........ ... ........... ...........122 Conf iguring the IA D ...
Introduction 122 Model 3086FR ATM IAD User Guide 10 • Security Intr oduction Security provides the ability to setup and enforce se curity policie s. The policies define the typ es of traffic per - mitted to pass th rough a gateway, either inbound, outb ound, or both, and from whi ch origins the traffic may be allowed to enter.
Configuring the security interface s 123 Model 3086FR ATM IAD User Guide 10 • Security The next step in configuring the Frame Rela y to ATM Converter is adding the default gateway rou te. Since the WAN IP ad dress o f the 308 6FR modem at the CO site i s 192.
Configuring the security interface s 124 Model 3086FR ATM IAD User Guide 10 • Security 4. Add one more se curity interf ace by rep eating s tep 2. 5. Selec t Name of t he LAN p ort ( ip1 ) and Interface Type to be inte rnal . Click on Apply . Now the F irewall policies wi ll be added b etween the secur ity interfaces.
Enabling the Firewall 125 Model 3086FR ATM IAD User Guide 10 • Security Firewall Po licies: ID | Name | Type 1 | Type 2 | Validator Allow Only -------------------------------------------------------.
Security Triggers 126 Model 3086FR ATM IAD User Guide 10 • Security To allow pings betwe en the two PCs: 1. From the Configuration Menu, > Config uration > Security > Firewall Policy Configuration > Port Filters > Add Raw IP Filter 2.
Security Triggers 127 Model 3086FR ATM IAD User Guide 10 • Security After co nfiguring t he FTP po rtfilt er, you can open an ft p sessi on from Re mote to Local, however you c an issue ftp commands (e.g., login, cd, etc.) but transfer data (e.g., ls, dir, get, put commands).
Intrusion Det ection System (I DS) 128 Model 3086FR ATM IAD User Guide 10 • Security Int rusio n Det ecti on S ystem ( IDS) The security fe ature in the 3086FR Frame Re lay to AT M Conv ert er p rov ides pr ote cti on fro m a n umber of attacks. Some attacks c ause a host to be blackliste d (i.
Intrusion Det ection System (I DS) 129 Model 3086FR ATM IAD User Guide 10 • Security Sets the dur ation for blo cking all suspic ious hosts . The fire wall dete cts when the system is being scanned by a suspicious host attemp ting to identify any open ports.
Intrusion Det ection System (I DS) 130 Model 3086FR ATM IAD User Guide 10 • Security.
131 Chapter 11 NA T (Network Address T ranslation) Chapter cont ents Introd ucti on ...... ................. ........... ........... ............ ................. ........... ........... ............ ........... ........ ... ........... ...........132 Enabl ing NA T .
Introduction 132 Model 3086FR ATM IAD User Guide 11 • NA T (Network Address Transl ation) Intr oduction The basi c step s for co nfigur ing NAT are : 1. Enable NAT betwe en the internal and external in terfaces of the fi rewall. 2. Create global addresses which will be added to the global pool of IP addresses on the WAN interface.
Introduction 133 Model 3086FR ATM IAD User Guide 11 • NA T (Network Address Transl ation) Global address pool and rese rved ma p 1. Clic k on Adva nced NAT Configuration… on the web page, “Securi ty Interface Configuratio n.” 2. Click on the hyperlink Add Global Address Pool .
Introduction 134 Model 3086FR ATM IAD User Guide 11 • NA T (Network Address Transl ation) 6. Set the parameters to the following values: – Glo bal IP Addres s:100.
135 Chapter 12 Monitoring Status Chapter cont ents Status LEDs ............. ........... ........... ........... ................. ............ .......
Status LEDs 136 Model 3086FR ATM IAD User Guide 12 • M onit oring St atus Status LEDs The LE Ds indic ate the s tatus of the Power , the WAN ( DSL) i nter-mode m link, Sync Se rial or T1/E1 por t, the Ethernet connection, and Status. All LED indica tors will pres ent the same looking profi le (e.
137 Chapter 13 Diagnostics Chapter cont ents Introd ucti on ...... ................. ........... ........... ............ ................. ........... ........... ............ ........... ........ ... ........... ...........138 Ping ............. ...
Introduction 138 Model 3086FR ATM IAD User Guide 13 • Diagn ostic s Intr oduction The Model 30 86FR offe rs t hree se ts of dia gnostics : Loca l Analo g Loop back (s eria l por t loop ), Remo te Dig ital Loopback (DSL loop ), and T 1/E1 Loops f or th e Model 30 86FR/K.
Operating Local Analog Loopback (LAL) —Serial Port Loop 139 Model 3086FR ATM IAD User Guide 13 • Diagn ostic s –N p i m a g e –K e y –I n i t b u n –I m . c o n f –T f t p u p d t . r b t –T f t p u p d t . e n d –S c r i p t . b a t 2.
T1/E1 Diagnostics 140 Model 3086FR ATM IAD User Guide 13 • Diagn ostic s typed on the keyboard of the loca l terminal will appe ar on the local terminal scr een after hav ing been p assed to the remo te Model 308 6FR and looped b ack). See Figu re 30 .
T1/E1 Diagnostics 141 Model 3086FR ATM IAD User Guide 13 • Diagn ostic s To set the 3086FR T1/E1 port in Network Loopb ack test, d o the follo wing: 1. Go to the 3086FR Main page , select E1 /T1 . Next, click on Test Modes , select network Loop using the dr op down me nu, clic k on the Activate T est Mode butt on.
T1/E1 Diagnostics 142 Model 3086FR ATM IAD User Guide 13 • Diagn ostic s 1. Go to the 3086FR Main page, sel ect E1/T1 . Next, c lick on Test Modes , sele ct local L oop using the dro p down me nu, clic k on the Activate T est Mode butt on. 2. Perform a BE R (bit erro r rate) test.
T1/E1 Diagnostics 143 Model 3086FR ATM IAD User Guide 13 • Diagn ostic s T1/E1 connection Status The 3086FR E1/T1 status page d isplays a number of al ar ms cond itions, Tr ansceive r status, and statis tics.
BIT Error Rate (V.52) Diagnostics 144 Model 3086FR ATM IAD User Guide 13 • Diagn ostic s BIT Error Rate (V .52) Diagnostics The Model 3086FR o ffers a V.52 Bit Erro r Rate (BER) 511 test patte rn. This test patter n may be invoked along wi th the LAL and RDL tes ts to eval uate the un it(s) and the DSL communic ation li nks.
145 Chapter 14 Contacting Patton for assistance Chapter cont ents Introd ucti on ...... ................. ........... ........... ............ ................. ........... ........... ............ ........... ........ ... ........... ...........146 Contact inf ormati on .
Introduction 146 Model 3086FR ATM IAD User Guide 14 • Contac ting Pat ton for assista nce Intr oduction This chapte r contains t he foll owing info rmation: • “Contact information” —des cribes how to c ontact PATTON tec hnical support fo r assistance.
Warranty Service and Returned Merch andise Authorizations (RMAs) 147 Model 3086FR ATM IAD User Guide 14 • Contac ting Pat ton for assista nce Return for cr edit policy • Less than 30 days: No Charge. Your credit will be issu ed up on rec eip t and i nspe cti on of the e qui pment .
Warranty Service and Returned Merch andise Authorizations (RMAs) 148 Model 3086FR ATM IAD User Guide 14 • Contac ting Pat ton for assista nce.
149 Appendix A Compliance information Chapter cont ents Comp liance .................. ................. ........... ............ ........... ........... ................. ............ ........... ....... .... ................. .....150 EMC ..........
Compl iance 15 0 Model 3086FR ATM IAD User Guide A • C omplianc e info rmation Complia nce EMC • FCC Pa rt 1 5, Cl ass A • EN55022, Clas s A • EN55024 Safety • UL60950-1 /CSA C22.
Authorized European Representative 151 Model 3086FR ATM IAD User Guide A • C omplianc e info rmation Authorized Eur opean R epresentative D R M Green European Co mpliance Ser vices Limited.
Industry Canada N otice 152 Model 3086FR ATM IAD User Guide A • C omplianc e info rmation some si tuations. Re pairs t o some c ertifie d equi pment sh ould be made by an authori zed maintenance facility designated by the supplier .
153 Appendix B Specifi cations Chapter cont ents Gener al Cha racteri stics .................. ........... ............ ........... ................. ........... ............ ........... ........... ............. .... .....154 G.SHDSL Character istics .
General Characteris tics 154 Model 3086FR ATM IAD User Guide B • Specif icati ons General Characteristic s • Compact low-cost plug and play IAD • 10/100 Etherne t • Unlimited h ost suppor t. • Com prehens ive har dware diag nostics , works with any op erating system , easy m aintenan ce and eff ortless installation.
Sync Serial Interface 155 Model 3086FR ATM IAD User Guide B • Specif icati ons Sync Serial Interface • ITU X.21 or V.35 interf ace • Available with Female M34, DB-25, and DB-15 connecto rs • User configurable DTE/DC E for X.21 T1/E1 In terface (30 86FR/RIK and RIT models o nly) • Line Rate 1.
PPP Suppor t 156 Model 3086FR ATM IAD User Guide B • Specif icati ons • uPNP control led de vice fo r seamle ss netw orked de vi ce int erconnectiv ity and Windows XP integrat ion. • IGMPv2 Proxy support (RFC 22 36). • Frame Relay with Annex A/D/LMI, RFC 1490 MpoFR and FRF.
Security 157 Model 3086FR ATM IAD User Guide B • Specif icati ons Secu rity • Packet filt ering fir ewall fo r cont rolled acces s to and from LAN/WAN. S upport for 25 5 rule s in 3 2 fil ter set s. 16 indivi dual connection prof iles. • DoS Dete ction/protection.
Pow er an d P ower Su pply Spe cif icat io ns 158 Model 3086FR ATM IAD User Guide B • Specif icati ons • Fuse rating: 250 Volt s, 400 mA, time delay Connect the equipment to a 36–60 VDC source that is electri - cally isolated from the AC source.
159 Appendix C Cable Recommendations Chapter cont ents DSL Cable ............... ........... ........... ................. ........... ............ ........... ................. ........... ........... ............ ........... .....160 Ethernet Cable .
DSL Cable 160 Model 3086FR ATM IAD User Guide C • Cable Recommendations DSL Cabl e 10 foot (3 m), RJ-1 1/RJ- 11 (ref er to “RJ-11 non-shielded port” on page 162) Ethernet C able Ether net cabl e.
161 Appendix D Physical Connectors Chapter cont ents RJ-45 shiel ded 10/ 100 Ethernet port .............. ........... ............ ........... ................. ........... ........... ............ ........... .....162 RJ-11 non- shield ed port ......
RJ-45 shielded 10/100 Ethern et port 162 Model 3086FR ATM IAD User Guide D • P hysic al Connec tors RJ-45 sh ielded 10/100 Ethernet por t Assuming the MD I-X switch is in the out pos ition. RJ-11 non-sh ielded port Single twisted-pai r (TP) for full-duplex transm issi on.
Serial port 163 Model 3086FR ATM IAD User Guide D • P hysic al Connec tors Serial port V. 3 5 ( M / 3 4 C o n n e c t o r ) V .35 (DB- 25 Fe male Conn ector) Pin # Signal A GND (Earth Ground/S hield.
Powe r in put 164 Model 3086FR ATM IAD User Guide D • P hysic al Connec tors X.21 (DB- 15 Connector) E1/T1 (RJ -48C Co nnector ) Power input IEC 320 co nnector (two pr ong).
165 Appendix E Command Line Interface (CLI) Operati on Chapter cont ents Introd ucti on ...... ................. ........... ........... ............ ................. ........... ........... ............ ........... ........ ... ........... .........
Introduction 166 Model 3086FR ATM IAD User Guide E • Command Line Interface (C LI) Operation Intr oduction The modem configuration and status ca n al so be view and m odified through the consol e, which is acc essible through the RS-232 seri al port o r through a Telne t sessio n over Ether net.
CLI T ermi nolo gy 167 Model 3086FR ATM IAD User Guide E • Command Line Interface (C LI) Operation Using the Console The cons ole c ommands neede d for the v ario us modes o f operatio n are des cribed in l ater sections . In this sub - section are the most basi c command s n eed ed fo r cons ol e oper at ion.
Administ ering user acco unts 168 Model 3086FR ATM IAD User Guide E • Command Line Interface (C LI) Operation clear list Æ ip interface ip1 list ? secondaryipaddresses Æ ip interface ip1 list seco.
Administ ering user acco unts 169 Model 3086FR ATM IAD User Guide E • Command Line Interface (C LI) Operation Enter the new pas sword tw ice as prompt ed: Enter new password: *** Again to verify: *** fi Note No che ck is mad e for any curr ent passwo rd which m ay have b een set for th e user.
Administ ering user acco unts 170 Model 3086FR ATM IAD User Guide E • Command Line Interface (C LI) Operation Example: To read the attribut e ‘Vers ion’: gshdsl show Version To set da ta rate to.
Administ ering user acco unts 171 Model 3086FR ATM IAD User Guide E • Command Line Interface (C LI) Operation Default Setting of the unit Termin al: Remot e Interface: Hdlc DataRateN: 24 DataRateI: .
Administ ering user acco unts 172 Model 3086FR ATM IAD User Guide E • Command Line Interface (C LI) Operation.
Ein wichtiger Punkt beim Kauf des Geräts Patton electronic 3086FR (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Patton electronic 3086FR noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Patton electronic 3086FR - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Patton electronic 3086FR reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Patton electronic 3086FR erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Patton electronic 3086FR besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Patton electronic 3086FR verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Patton electronic 3086FR. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Patton electronic 3086FR gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
