Benutzeranleitung / Produktwartung VCR2120 des Produzenten Palsonic
Zur Seite of 25
Instruction manual Video cassette recorder VCR 2120 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.
WORTH knowing Please keep the video machines guarantee card and receipt safe for warranty purposes. Precautions Read carefully through this manual to familiarize yourself with this high-quality video recorder. Make sure the rating of your household electricity supply matches that shown on the back of the video recorder.
Tuning in new stations Contnets WORTH knowing Before doing anything with the machine, please read the chapter “Initial installation". Controls The remote control unit .............................................................................
The remote control unit CONTROLS The remote control is the principle means of control, but the main playback and record functions are also available on the front of the machine. Press any button to turn on the power. The buttons to use are marked on the following pages.
2x On screen display The machine CONTROLS Press any button to turn on the power . standby/on playback stop and ejecting the cassette front input sockets for connecting a camcorder programme (station) .
Fitting the remote control's batteries Connecting up the video recorder Place your video horizontally on a flat, steady base so that air can circulate around it for ventilation away from humidity and heat, magnetic fields, such as those from loudspeakers etc and with no heavy objects placed on top Initial INSTALLATION , 1.
Setting up the video recorder Switch the TV on You can also start "Auto Search" in the menu "PR PRESET" "Auto Search" To tune in new stations (manual tuning) and to enter.
PLAYING Your TV and your video recorder are switched on. To see the picture from your video, press the station button on the TV reserved for video input or the AV (Audio/Video) button cassettes Start playback. Stop playback Fast forward or rewind the cassette from stop When you load a protected cassette (e.
CM Skip Accessing new recordings (index scan) Variable slow motion Variable picture search Still PLAYING cassettes Still picture from playback. Each press of the button advances the picture one frame.
Simple recording The TV stations on the video have been tuned in (page 5). The video is switched on. You can either watch the picture from the video on the TV by pressing the station button reserved for video input or the AV button, watch another TV station or switch off the TV altogether.
One touch recording - OTR RECORDING cassettes For timer recordings, clock, date, and stations must be set correctly Load a cassette with its safety tab in place (see page 13) and with sufficient free space for the recording Choose the station you want and press the button once for every 30 minutes of programme you wish to record.
Normal timer recording For timer recordings, clock, date, and stations must be set correctly. Load a cassette with its safety tab in place (see page 13) and with sufficient free space for the recording. Call the video's "MAIN MENU", choose "Timer Program".
Setting time and date Call the video's "MAIN MENU", choose "T imer Program Select the programming to change or erase. If you want to erase this programming press button 0, confirm with OK. If you wish to make changes: Move to the position you want to change using the buttons.
Accessing counter zero position Remaining time and cassette length Clock / counter display The counter counts in real time from the point you load the cassette This does not have to be its beginning! The counter does not count unrecorded parts of the tape If you rewind beyond the zero position, the counter counts in negative values (e.
Child Lock and... Cassettes Menu languages Call the video's "MAIN MENU", choose "VCR Setup", then "Language Set" Select your language Confirm.
Tuning The TV and video recorder are switched on. To see the picture from your video, press the station button on the TV reserved for video input or the AV (Audio / Video) button. "AV" should not be selected with the AV button on the video. Call the video's "MAIN MENU", choose "PR Preset".
Station names Tuning in N E W STATI 0 N S If your video is showing no station name or is showing a station name incorrectly, you can correct this. Select " : name correct" on the "MANUAL SET" menu. Call this menu (just see the left page), if it isn't displayed.
Clearing programme locations Sorting programme locations Tuning in NEW STATIONS If the location numbers used for programmes stored in your TV and video are different, you can change them on the video. To do this, move the stations to the right numbers, until they are arranged the way you want.
To the TV via antenna cable (if you are not using a RCA cable) If you are using a RCA cable, select the AV input on the TV to see the picture from the video If you are not using a RCA cable, select th.
Assembling To copy to your video from another video machine, connect the two machines with a cable between their RCA sockets and select as programme "AV" using the AV button. Set the other video machine to playback and your machine to record.
for experienced users BRIEF INSTRUCTION Playing back Your TV and your video recorder are switched on To see the picture from your video, press the station button on the TV reserved for video input or the AV (Audio/Video) button. Start playback Stop playback Fast forward or rewind the cassette from stop Still picture from playback.
Call the video's "MAIN MENU", Confirm, choose "Timer Program". for experienced users BRIEF INSTRUCTION For timer recordings, clock, date, and stations must be set correctly. Load a cassette with safety tab in place (page 13) and with sufficient free space for the recording.
Before you ask a specialist Mains supply thevideo's display does not light the video doesn't work Recording doesn't start the cassette starts playback or is ejected Playback no picture .
12 5/14-17 13 7 Precautions 12 Cassette length .................................... Channel ....................................... Child lock ............................................. CM Skip ............................................... Condensation .
Instruction Manual Pages 4-5 VCR 2120 Unplug the aerial cable from your TV and plug it into the socket "ANT.IN" of the video. Plug the short coaxial cable provided into the "ANT.OUT" socket of the video and the aerial socket of the TV.
Ein wichtiger Punkt beim Kauf des Geräts Palsonic VCR2120 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Palsonic VCR2120 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Palsonic VCR2120 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Palsonic VCR2120 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Palsonic VCR2120 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Palsonic VCR2120 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Palsonic VCR2120 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Palsonic VCR2120. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Palsonic VCR2120 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
