Benutzeranleitung / Produktwartung M2A690G des Produzenten Asus
Zur Seite of 108
V-Series M2A690G ASUS PC (Desktop B ar ebone) Installation Manual R R.
i i Copyright © 2007 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a r.
iii Table of contents Notices ................................................................................................ vi Safety information ..............................................................................vii About this guide ...
i v Table of contents Chapter 3: Starting up 3.1 Installing an operating system .............................................. 3-2 3.2 Powering up .......................................................................... 3-2 3.3 Support CD information .
v Table of contents 5.3 Main menu ........................................................................... 5-14 5.3.1 System Time ........................................................ 5-14 5.3.2 System Date ......................................
v i Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vii Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
viii About this guide Audience This guide provides general information and installation instructions about the ASUS Vintage V-Series M2A690G barebone system. This guide is intended for experienced users and integrators with hardware knowledge of personal computers.
i x Conventions used in this guide WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task.
x System package contents Check your V-Series M2A690G system package for the following items. If any of the items is damaged or missing, contact your retailer immediately. Item description 1. ASUS V-Series M2A690G barebone system with • ASUS motherboard • Power supply unit • ASUS chassis 2.
R R Chapter 1 System introduction This chapter gives a general description of the ASUS V-Series M2A690G. The chapter lists the system features including introduction on the front and rear panel, and internal components.
1-2 Chapter 1: System introduction 1.1 Welcome! Thank you for choosing the ASUS V-Series M2A690G! The ASUS V-Series M2A690G is an all-in-one barebone system with a versatile home entertainment feature.
1-3 ASUS V-Series M2A690G 1. Two empty 5.25-inch bays. These bays are for IDE optical drives. 2. 3.5-inch drive bays. These slots are for 3.5-inch oppy or hard disk drives. 3. Power button. Press this button to turn the system on. 4. Reset button. Press this button to reboot the system without turning off the power.
1-4 Chapter 1: System introduction 1.3 Rear panel The system rear panel includes the power connector and several I/O ports that allow convenient connection of devices. 1. Power connector. This connector is for the power cable and plug. 2. Voltage selector.
1-5 ASUS V-Series M2A690G 8. USB 2.0 ports 1, 2, 3 and 4. These 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 9. Microphone port (pink). This port connects a microphone. 10. Line Out port (lime). This port connects a headphone or a speaker.
1-6 Chapter 1: System introduction Voltage selector The PSU has a 115 V/230 V voltage selector switch located beside the power connector. Use this switch to select the appropriate system input voltage according to the voltage supply in your area. If the voltage supply in your area is 100-127 V, set this switch to 115 V.
1-7 ASUS V-Series M2A690G 1.4 Internal components The illustration below is the internal view of the system when you remove the top cover and the power supply unit. The installed components are labeled for your reference. Proceed to Chapter 2 for instructions on installing additional system components.
1-8 Chapter 1: System introduction.
R R Chapter 2 Basic installation This chapter provides step-by-step instructions on how to install components in the system..
2-2 Chapter 2: Basic installation 2.1 Preparation Before you proceed, make sure that you have all the components you plan to install in the system. Basic components to install 1. Central Processing Unit (CPU) 2. DDR2 Dual Inline Memory Module (DIMM) 3.
2-3 ASUS V-Series M2A690G 2.3 Removing the side cover and front panel assembly 1. Remove the cover screws on the rear panel. 2. Pull the side cover toward the rear panel until its hooks disengage from the chassis tab holes. Set the side cover aside. 3.
2-4 Chapter 2: Basic installation 2.4.1 Installing the CPU To install a CPU: 1. Locate the CPU socket on the motherboard. Make sure that the socket lever is lifted up to a 90º angle; otherwise, the CPU will not t in completely. 2. Unlock the socket by pressing the lever sideways, then lift it up to a 90º angle.
2-5 ASUS V-Series M2A690G 3. Position the CPU above the socket such that the CPU corner with the gold triangle matches the socket corner with a small triangle. 4. Carefully insert the CPU into the socket until it ts in place. 5. When the CPU is in place, push down the socket lever to secure the CPU.
2-6 Chapter 2: Basic installation 2.4.2 Installing the heatsink and fan Make sure that you use only AMD-certied heatsink and fan assembly. Follow these steps to install the CPU heatsink and fan. 1. Place the heatsink on top of the installed CPU, making sure that the heatsink ts properly on the retention module base.
2-7 ASUS V-Series M2A690G 2. Attach one end of the retention bracket to the retention module base. 1 3 4 5 2 3. Align the other end of the retention bracket (near the retention bracket lock) to the retention module base. A clicking sound denotes that the retention bracket is in place.
2-8 Chapter 2: Basic installation 2.5 Installing a DIMM The system motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Module (DIMM) sockets.
2-9 ASUS V-Series M2A690G Qualified Vendors Lists (QVL) Size Vendor Model S i d e ( s ) Component A B C D D R 2 - 5 3 3 256MB KINGSTON E5116AF-5C-E SS KVR533D2N4/256 V V V 512MB KINGSTON HYB18T512800AF37 SS KVR533D2N4/512 V V V 1024MB KINGSTON 5YDIID9GCT DS KVR533D2N4/1G V V V 512MB Qimonda HYB18T512800BF37 SS HYS64T64000HU-3.
2-10 Chapter 2: Basic installation Side(s): SS - Single-sided DS - Double-sided CL: CAS Latency DIMM support: A - Supports one module inserted into either slot, in Single-cha nnel memory conguration. B - Supports one pair of modules inserted into both slots as one pair of Dual-channel memory conguration.
2-11 ASUS V-Series M2A690G 2.5.3 Removing a DDR2 DIMM Follow these steps to remove a DIMM. 1. Simultaneously press the retaining clips outward to unlock the DIMM. 2. Remove the DIMM from the socket. Support the DIMM lightly with your ngers when pressing the retaining clips.
2-12 Chapter 2: Basic installation 2.6 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. 2.6.1 Installing an expansion card To install an expansion card: 1.
2-13 ASUS V-Series M2A690G * These IRQs are usually available for ISA or PCI devices. When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that the cards do not need IRQ assignments. Otherwise, conicts will arise between the two PCI groups, making the system unstable and the card inoperable.
2-14 Chapter 2: Basic installation 2.6.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specications.
2-15 ASUS V-Series M2A690G 4 4 3 2.7 Installing an optical drive Refer to the instructions in this section if you wish to install a new optical drive. Follow these steps to install an optical drive: 1. Place the chassis upright. 2. Remove the drive slot metal plate cover.
2-16 Chapter 2: Basic installation 7. Connect the other end of the IDE ribbon cable to the primary IDE connector (labeled PRI_IDE) on the motherboard. 8. Remove the dummy drive slot cover from the front panel. 9. Replace the front panel. 2.8 Installing a hard disk drive To install a Serial ATA hard disk drive: 1.
2-17 ASUS V-Series M2A690G 4. Connect a 15-pin Serial ATA power plug from the power supply unit to the 15-pin power connector at the back of the drive. - OR - Connect a 4-pin (female) power plug from the power supply unit to the 4-pin (male) power connector at the back of the drive.
2-18 Chapter 2: Basic installation 3. Connect the gray interface of the IDE ribbon cable to the IDE connector on the drive. 4. If you install two IDE hard disk drives, connect the black interface of the IDE ribbon cable to the IDE connector on the second (Slave) IDE hard disk drive.
2-19 ASUS V-Series M2A690G To install the card reader module: 1. Remove the drive slot metal plate cover. 2. Carefully insert the card reader module into the 3.5-inch bay until the screw holes align with the holes on the bay. 3. Secure the card reader module with two screws on both sides.
2-20 Chapter 2: Basic installation 2.10 Installingaoppydiskdrive The Vintage2-PE2 system comes with one 3.25-inch drive bay for a oppy disk drive.
2-21 ASUS V-Series M2A690G 2.11 Re-connecting cables You may have disconnected some cables when you were installing components. You must re-connect these cables before you replace the chassis cover.
2-22 Chapter 2: Basic installation 2.12 Reinstalling the cover If you installed an optical and/or oppy disk drive, remove the bay cover(s) on the front panel assembly before reinstalling it to the chassis. To do this: 1. Locate the bay cover locks.
2-23 ASUS V-Series M2A690G.
R R Chapter 3 Starting up This chapter helps you power up the system and install drivers and utilities from the support CD..
3-2 Chapter 3: Starting up R 3.1 Installing an operating system The barebone system supports Windows ® 2000/XP operating systems (OS). Always install the latest OS version and corresponding updates so you can maximize the features of your hardware. 3.
3-3 ASUS V-Series M2A690G 3.3.1 Running the support CD To begin using the support CD, place the CD in your optical drive. The CD automatically displays the Drivers menu if Autorun is enabled in your computer. If Autorun is NOT enabled in your computer, browse the contents of the support CD/DVD to locate the le ASSETUP.
3-4 Chapter 3: Starting up 3.3.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll - Drivers Installation Wizard Launches the ASUS InstallAll driver installation wizard.
3-5 ASUS V-Series M2A690G 3.3.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS InstAll - Installation Wizard for Utilities Launches the ASUS InstallAll utilities installation wizard. ASUS Cool ‘n’ Quiet Utility This item installs the ASUS Cool ‘n’ Quiet utility.
3-6 Chapter 3: Starting up 3.3.4 Make Disk menu The Make Disk menu allows you to make a RAID driver disk. Make ATI RAID/AHCI Driver Allows you to create an ATI ® Serial ATA (SATA) RAID/AHCI driver disk. Make ATI RAID/AHCI Vista Driver Allows you to create an ATI ® Serial ATA (SATA) RAID/AHCI driver disk for Windows ® Vista Operating System (OS).
3-7 ASUS V-Series M2A690G 3.3.6 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also nd this information on the inside front cover of this user guide.
3-8 Chapter 3: Starting up 3.4 Software information Most of the applications in the support CD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software for more information.
3-9 ASUS V-Series M2A690G Button Function Opens the Conguration window Opens the Report window Opens the Desktop Management Interface window Opens the Peripheral Component Interconnect window Opens.
3-10 Chapter 3: Starting up Hardware monitor panels The hardware monitor panels display the current value of a system sensor such as fan rotation, CPU temperature, and voltages. The hardware monitor panels come in two display modes: hexagonal (large) and rectangular (small).
3-11 ASUS V-Series M2A690G Monitoring sensor alert The monitor panel turns red when a component value exceeds or is lower than the threshold value. Refer to the illustrations below. Large display Small display WMI browser Click to display the WMI (Windows Management Instrumentation) browser.
3-12 Chapter 3: Starting up PCI browser Click to display the PCI (Peripheral Component Interconnect) browser. This browser provides information on the PCI devices installed on your system. Click the plus sign (+) before the PCI Information item to display available information.
3-13 ASUS V-Series M2A690G Memory usage The Memory tab shows both used and available physical memory. The pie chart at the bottom of the window represents the used (blue) and the available physical memory. Configuring PC Probe II Click to view and adjust the sensor threshold values.
3-14 Chapter 3: Starting up.
Chapter 4 Motherboard introduction This chapter gives information about he motherboard that comes with the system. This chapter includes the motherboard layout, jumper settings, and connector locations.
4-2 Chapter 4: Motherboard info 4.1 Introduction The Vintage V-Series M2A690G barebone system comes with an ASUS motherboard. This chapter provides technical information about the motherboard for future upgrades or system reconguration. 4.2 Motherboard layout 23cm (9.
4-3 ASUS V-Series M2A690G 4.3 Jumpers 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
4-4 Chapter 4: Motherboard info • The USB device wake-up feature requires a power supply that can provide 500 mA on the +5VSB lead for each USB port; otherwise, the system would not power up. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode.
4-5 ASUS V-Series M2A690G 4.4 Connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided oppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the oppy disk drive.
4-6 Chapter 4: Motherboard info 2. IDE connectors (40-1 pin PRI_IDE) The onboard IDE connectors are for Ultra DMA 100/66/33 signal cables. There are three connectors on each Ultra DMA 100/66/33 signal cable: blue, black, and gray.
4-7 ASUS V-Series M2A690G 3 . Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives.
4-8 Chapter 4: Motherboard info 5. CPU, Power and Chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN,3-pin PWR_FAN) The fa n co nnecto rs sup port c ooling fans of a t otal o f 1A~2.
4-9 ASUS V-Series M2A690G 7. ATX power connectors (24-pin EATXPWR and 4-pin ATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t.
4-10 Chapter 4: Motherboard info 8. Optical drive audio connector (4-pin CD1) This connector is for the 4-pin audio cable that connects to the audio connector at the back of the optical drive. Enable the CD-IN function in the audio utility when using this connector.
4-11 ASUS V-Series M2A690G 11. Front panel audio connector (10-1 pin AAFP1) Th is con nec tor is fo r a ch ass is- mou nte d f ron t p ane l a udi o I /O mod ule th at sup por ts HD Aud io sta nda rd.
4-12 Chapter 4: Motherboard info 13. System panel connector (12-pin PANEL) This connector supports several chassis-mounted functions. R System Panel Connector P ANEL PLED- +5V Speaker SPEAKER PLED Gro.
4-13 ASUS V-Series M2A690G 14. Ports on the HDMI module This module contains four ports, allowing you to connect any kind of video/audio source to your system. Connect the HDMI module to the onboard PCI Express x16 slot and the HDMI module cable to the onboard YUV/SPDIF_OUT connector.
4-14 Chapter 4: Motherboard info Playback of HD DVD and Blu-Ray Discs The speed and bandwidth of the CPU/Memory, DVD player, and drivers will affect the playback quality.
1 R R Chapter 5 BIOS setup This chapter tells how to change system settings through the BIOS Setup menus and describes the BIOS parameters..
5-2 Chapter 5: BIOS setup 5.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS EZ Flash 2 (Updates the BIOS using a oppy disk, USB Flash, or the motherboard support CD during POST.
5-3 ASUS V-Series M2A690G 2. Co py the or igi nal or th e l ate st mot her boa rd BIO S le to the bo ota ble o ppy di sk. To update the BIOS using EZ Flash 2: 1. Visit the ASUS website (www.asus.com) to download the latest BIOS le for the motherboard.
5-4 Chapter 5: BIOS setup Message: Do You Want To Save Bios (Y/N) 5.1.3 Award BIOS Flash Utility The Basic Input/Output System (BIOS) can be updated using the AwardBIOS Flash Utility. Follow these instructions to update the BIOS using this utility. 1.
5-5 ASUS V-Series M2A690G 7. Press <N> when the utility prompts you to save the current BIOS le. The following screen appears. 8. The utility veries the BIOS le in the oppy disk and starts ashing the BIOS le. Do not turn off or reset the system during the ashing process! AwardBIOS Flash Utility for ASUS V8.
5-6 Chapter 5: BIOS setup 5.1.4 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process.
5-7 ASUS V-Series M2A690G 4. The utility automatically checks the devices for the BIOS le. When found, the utility reads the BIOS le and starts ashing the corrupted BIOS le. 5. Restart the system after the utility completes the updating process.
5-8 Chapter 5: BIOS setup Installing ASUS Update To install ASUS Update: 1. Place the support CD in the optical drive. The Drivers menu appears. 2. Click the Utilities tab, then click Install ASUS Update. 3. The ASUS Update utility is copied to your system.
5-9 ASUS V-Series M2A690G 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select. Click Next. Updating the BIOS through the Internet To update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate.
5-10 Chapter 5: BIOS setup Updating the BIOS through a BIOS file To update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears.
5-11 ASUS V-Series M2A690G 5.2 BIOS setup program 5.2.1 BIOS menu screen 5.2.2 Menu bar The menu bar on top of the screen has the following main items: Main For changing the basic system conguratio.
5-12 Chapter 5: BIOS setup 5.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting M a i n shows the Main menu items. The other items (Advanced, Power, Boot, and Exit) on the menu bar have their respective menu items.
5-13 ASUS V-Series M2A690G 5.2.7 Pop-up window Select a menu item then press <Enter> to display a pop-up window with the conguration options for that item. 5.2.8 General help At the top right corner of the menu screen is a brief description of the selected item.
5-14 Chapter 5: BIOS setup F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit Phoenix-Award BIOS CMOS Setup Utility Main Advanced Power Boot Tools Exit Select Menu Item Specic Help Change the day, month, year and century.
5-15 ASUS V-Series M2A690G 5.3.4 Primary IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information.
5-16 Chapter 5: BIOS setup Capacity Displays the auto-detected hard disk capacity. This item is not congurable. Cylinder Shows the number of the hard disk cylinders. This item is not congurable. Head Shows the number of the hard disk read/write heads.
5-17 ASUS V-Series M2A690G 5.3.5 SATA 1-4 While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press <Enter> to display the SATA device information.
5-18 Chapter 5: BIOS setup Head Shows the number of the hard disk read/write heads. This item is not congurable. Landing Zone Shows the number of landing zone per track. This item is not congurable. Sector Shows the number of sectors per track. This item is not congurable.
5-19 ASUS V-Series M2A690G 5.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction.
5-20 Chapter 5: BIOS setup 5.4.2 CPU Configuration Phoenix-Award BIOS CMOS Setup Utility Advanced CPU Conguration CPU Type AMD Sempron(tm) Processor 3400+ CPU Speed 1800MHz Cache RAM 256K AMD Live! [Disabled] AMD Cool’n’Quiet Function [Auto] AMD Live! [Disabled] Enables or disables the AMD Live! technology.
5-21 ASUS V-Series M2A690G Select Menu Item Specic Help DRAM timing and control Phoenix-Award BIOS CMOS Setup Utility Advanced Chipset DRAM Conguration LDT & PCI Bus Control UMA Frame Buffer Size [64MB] Current UMA Size 64 MB X Surroundview Disabled Spread Spectreum [Autoz] 5.
5-22 Chapter 5: BIOS setup Plug & Play O/S [No] When set to [No], the BIOS congures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system congures the Plug and Play devices not required for boot.
5-23 ASUS V-Series M2A690G PCI Latenct Timer (CLK) [64] Use <+> and <-> to adjust the value. The value ranges from 0 to 255. Maximum Payload Size [4096] Sets maximum TLP payload size for the PCI Express devices.
5-24 Chapter 5: BIOS setup IDE DMA transfer access [Enabled] Allows you to enable or disable the IDE DMA transfer access. Conguration options: [Disabled] [Enabled] OnChip IDE Channel 0 [Enabled] Allows you to enable or disable the onchip IDE channel 0 controller .
5-25 ASUS V-Series M2A690G OnBoard LAN Boot ROM [Disabled] Allows you to enable or disable the onboard LAN boot ROM. Conguration options: [Disabled] [Enabled] Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address.
5-26 Chapter 5: BIOS setup 5.5.1 ACPI Suspend Type [S1&S3] Allows you to select the Advanced Conguration and Power Interface (ACPI) state to be used for system suspend.
5-27 ASUS V-Series M2A690G Power On By External Modem [Disabled] This allows either settings of [Enabled] or [Disabled] for powering up the computer when the external modem receives a call while the computer is in Soft-off mode.
5-28 Chapter 5: BIOS setup Date of Month Alarm [xx] To set the date of alarm, highlight this item and press <Enter> to display the Date of Month Alarm pop-up menu. Key-in a value within the specied range then press <Enter>. Conguration options: [Min=0] [Max=31] Alarm Time (hh:mm) [xx:xx:xx] To set the time of alarm: 1.
5-29 ASUS V-Series M2A690G CPU Temperature, MB Temperature The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures.
5-30 Chapter 5: BIOS setup 1st ~ 4th Boot Device [Removable] These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system.
5-31 ASUS V-Series M2A690G 1. SATA Allows you to assign a hard disk drive attached to the system. 5.6.3 Hard Disk Drives Select Menu Item Specic Help Hard Disk Drives 1.
5-32 Chapter 5: BIOS setup Typematic Rate (Chars/Sec) [6] Allows you to select the rate at which a character repeats when you hold a key. Conguration options: [6] [8] [10] [12] [15] [20] [24] [30] Typematic Delay (Msec) [250] Allows you to set the delay before keystrokes begin to repeat.
5-33 ASUS V-Series M2A690G 2. Press any key to continue. The password eld setting is changed to Clear. A note about passwords The Supervisor password is required to enter the BIOS Setup program preventing unauthorized access. The User password is required to boot the system preventing unauthorized use.
5-34 Chapter 5: BIOS setup 5.7 Tools menu The Tools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the sub-menu. Phoenix-Award BIOS CMOS Setup Utility Main Advanced Power Boot Tools Exit Select Menu Item Specic Help Press [Enter] to Set.
5-35 ASUS V-Series M2A690G Alarm Time (hh:mm) 0 : 0 Allows you to set the alarm time. Press <Tab> to select the eld, then use <+> or <-> to change the value.
5-36 Chapter 5: BIOS setup 3. Enter BIOS setup program. Go to the “Tools” menu to sel ect “Load from File”. Press <Enter> then the setup screen will appear. 4. Press <Tab> to switch between drives before the correct “xxx.CMO” le is found.
5-37 ASUS V-Series M2A690G Select Menu Item Specic Help Save current BIOS Prole to Prole 1. Save BIOS Prole Save to Prole 1 Save to Prole 2 Save to File Save BIOS Profile Save to Profile 1/2 Allows you to save the current BIOS le to the BIOS Flash.
5-38 Chapter 5: BIOS setup 5.7.3 ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press <Enter>, a conrmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to conrm your choice.
5-39 ASUS V-Series M2A690G Exit & Save Changes Once you are nished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM. An onboard backup battery sustains the CMOS RAM so it stays on even when the PC is turned off.
Ein wichtiger Punkt beim Kauf des Geräts Asus M2A690G (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Asus M2A690G noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Asus M2A690G - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Asus M2A690G reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Asus M2A690G erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Asus M2A690G besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Asus M2A690G verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Asus M2A690G. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Asus M2A690G gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
