Benutzeranleitung / Produktwartung CUW-RM des Produzenten Asus
Zur Seite of 128
® CUW -RM Intel ® 810 microA TX Motherboard USER ’ S MANUAL.
2 ASUS CUW -RM User’s Manual USER'S NOTICE Product Name: ASUS CUW -RM Manual Revision: 1.01 E487 Release Date: December 1999 No part of this manual, including the products and software describe.
ASUS CUW -RM User’s Manual 3 ASUS CONT ACT INFORMA TION ASUST eK COMPUTER INC. (Asia-Pacific) Marketing Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 1 12 T elephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.
4 ASUS CUW -RM User’s Manual CONTENTS 1. INTRODUCTION ............................................................................. 7 1.1 How This Manual Is Or ganized .................................................. 7 1.2 Item Checklist .........
ASUS CUW -RM User’s Manual 5 CONTENTS 4.5 Power Menu .............................................................................. 70 4.5.1 Power Up Control ............................................................ 72 4.5.2 Hardware Monitor ....
6 ASUS CUW -RM User’s Manual FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: .
ASUS CUW -RM User ’ s Manual 7 1. INTRODUCTION Sections/Checklist 1.1 How This Manual Is Organized This manual is divided into the following sections: 1) INTRODUCTION Manual information and checklis.
8 ASUS CUW -RM User ’ s Manual 2. FEA TURES Specifications 2. FEA TURES 2.1 The ASUS CUW -RM Motherboard The CUW -RM motherboard from ASUS is carefully designed for the demanding PC user who wants many smart features in a small package.
ASUS CUW -RM User ’ s Manual 9 2. FEA TURES 2. FEA TURES Optional Components • Around-the-Clock Intrusion Detection! Supports chassis intrusion monitor - ing through the ASUS ASIC.
10 ASUS CUW -RM User ’ s Manual 2. FEA TURES Performance 2. FEA TURES 2.1.3 Performance • UltraPerformance! O nboard IDE Bus Master controller with two connectors that support four IDE devices in two channels.
ASUS CUW -RM User ’ s Manual 11 2.1.4 Intelligence • Fan Status Monitoring and Alarm! T o prevent system overheat and system damage, the CPU, power supply , and system fans can be monitored for RPM and failure. All the fans are set for its normal RPM range and alarm thresholds.
12 ASUS CUW -RM User ’ s Manual 2. FEA TURES 2.2 CUW -RM Motherboard Components See opposite page for locations. MB Components 2. FEA TURES Location Processor Support Socket 370 for Coppermine/Mendocino Processors ................ 3 Feature Setting DIP Switches .
ASUS CUW -RM User ’ s Manual 13 2. FEA TURES 2. FEA TURES Component Locations 17 8 6 5 3 2 24 21 20 19 13 15 11 7 9 10 23 22 4 16 18 12 14 1 2.3 CUW -RM Component Locations.
14 ASUS CUW -RM User ’ s Manual 3. HARDW ARE SETUP Motherboard Layout 3. H/W SETUP NOTE: Grayed items are optional at the time of purchase. 3.1 Motherboard Layout 01 DIMM Socket 2 (64/72-bit, 168-pi.
3.2 Layout Contents Motherboard Settings 1) JEN p.18 JumperFree ™ Mode (Enable/Disable) 2) VIO p.18 I/O V oltage Setting (Normal/+3.66V) 3) CODEC p.19 Onboard Audio Codec Setting (Enable/Disable) 4) PCI3VSEL p.20 PCI 3V olt Setting (Enable 3 VSB/Disable 3 VSB) 5) SAFE_MD p.
16 ASUS CUW -RM User ’ s Manual 3. HARDW ARE SETUP Layout Contents 3. H/W SETUP 23) JTPWR p.41 Thermal Sensor Connector (2 pins) 24) PLED (P ANEL) p.42 System Power LED Lead (3-1 pins) 25) KEYLOCK (P ANEL) p.42 Keyboard Lock Switch Lead (2 pins) 26) SPEAKER (P ANEL) p.
ASUS CUW -RM User ’ s Manual 17 3. HARDW ARE SETUP Motherboard Settings 3. H/W SETUP 3.3 Hardware Setup Procedure Before using your computer , you must complete the following steps: • Check Mother.
18 ASUS CUW -RM User ’ s Manual 3. HARDW ARE SETUP Motherboard Settings 3. H/W SETUP 1) JumperFree ™ Mode Setting (JEN) This jumper allows you to enable or disable the JumperFree ™ mode. The JumperFree ™ mode allows processor settings to be made through the BIOS setup ( see 4.
ASUS CUW -RM User ’ s Manual 19 3. HARDW ARE SETUP Motherboard Settings 3. H/W SETUP 3) Onboard Audio Codec Setting (CODEC) on audio model only The onboard audio codec may be enabled or disabled using all of these jumpers.
20 ASUS CUW -RM User ’ s Manual 3. HARDW ARE SETUP Motherboard Settings 3. H/W SETUP 4) PCI 3 V olt Setting (PCI3VSEL) This jumper allows you to select the voltage supplied to PCI devices. If you have PCI devices that require auxiliary power , set this jumper to Enable 3 VSB .
ASUS CUW -RM User ’ s Manual 21 3. HARDW ARE SETUP Motherboard Settings 3. H/W SETUP 6) Automatic T imeout Reboot Setting (NO_REBOOT) The motherboard is set so that when the BIOS detects a hang (timeout) during bootup, the motherboard will automatically reboot.
22 ASUS CUW -RM User ’ s Manual 3. HARDW ARE SETUP 7) CPU External Frequency Setting (DSW) This option tells the clock generator what frequency to send to the CPU, DRAM, and the PCI bus. This allows the selection of the CPU ’ s External frequency .
ASUS CUW -RM User ’ s Manual 23 3. HARDW ARE SETUP Motherboard Settings 3. H/W SETUP External Frequency T able for Socket 370 Processors The following table is for use by experienced motherboard installers only . Overclock- ing can result in system instability or even shortening the life of the processor .
24 ASUS CUW -RM User ’ s Manual 3. HARDW ARE SETUP System Memory 3. H/W SETUP NOTE: At the time this User ’ s Manual was written, 256MB DIMMs are only avail- able as Double-Sided registered memory . Using 2x2x2 SDRAM can greatly im- prove the onboard graphics ’ performance.
ASUS CUW -RM User ’ s Manual 25 3. HARDW ARE SETUP System Memory 3. H/W SETUP 3.5.2 Memory Installation Insert the module(s) as shown. Because the number of pins are dif ferent on either side of the breaks, the module will only fit in the orientation shown.
26 ASUS CUW -RM User ’ s Manual 3. HARDW ARE SETUP CPU 3. H/W SETUP 3.6 Central Processing Unit (CPU) The motherboard provides a ZIF Socket 370. The CPU that came with the mother - board should have a fan attached to it to prevent overheating. If this is not the case, then purchase a fan before you turn on your system.
ASUS CUW -RM User ’ s Manual 27 3. HARDW ARE SETUP Expansion Cards 3. H/W SETUP 3.7 Expansion Cards W ARNING! Make sure that you unplug your power supply when adding or removing expansion cards or other system components. Failure to do so may cause severe damage to both your motherboard and expansion cards.
28 ASUS CUW -RM User ’ s Manual 3. HARDW ARE SETUP 3.7.2 Assigning IRQs for Expansion Cards Some expansion cards need an IRQ to operate. Generally , an IRQ must be exclu- sively assigned to one use. In a standard design, there are 16 IRQs available but most of them are already in use, leaving 6 IRQs free for expansion cards.
ASUS CUW -RM User ’ s Manual 29 3. HARDW ARE SETUP IMPORT ANT : If using PCI cards on shared slots, make sure that the drivers support “ Share IRQ ” or that the cards do not need IRQ assignments. Conflicts will arise between the two PCI groups that will make the system unstable or cards inoperable.
30 ASUS CUW -RM User ’ s Manual 3. HARDW ARE SETUP Expansion Cards 3. H/W SETUP 3.7.3 Audio Modem Riser (AMR) Slot This connector supports a specially designed audio and/or modem card called an AMR. Main processing is done through software and controlled by the motherboard ’ s Intel I / O Controller Hub (ICH).
ASUS CUW -RM User ’ s Manual 31 3. HARDW ARE SETUP Connectors 3. H/W SETUP 3.8 External Connectors W ARNING! Some pins are used for connectors or power sources. These are clearly distinguished from jumpers in 3.1 Motherboard Layout . Placing jumper caps over these connector pins will cause damage to your motherboard.
32 ASUS CUW -RM User ’ s Manual Connectors 3. H/W SETUP 3. HARDW ARE SETUP 3) Universal Serial Bus Ports 1 & 2 (T wo Black 4-pin USB) T wo USB ports are available for connecting USB devices.
ASUS CUW -RM User ’ s Manual 33 3. HARDW ARE SETUP Connectors 3. H/W SETUP 6) Monitor Output Connector (Blue 15-pin VGA) This connector is for output to a VGA-compatible device.
34 ASUS CUW -RM User ’ s Manual Connectors 3. H/W SETUP 3. HARDW ARE SETUP 9) Primary / Secondary IDE Connectors (40-1 pin PRIMAR Y/SECONDAR Y) These connectors support the provided UltraDMA/66 IDE hard disk ribbon cable.
ASUS CUW -RM User ’ s Manual 35 3. HARDW ARE SETUP Connectors 3. H/W SETUP 1 1) W ake-On-LAN Connector ( 3 -pin WOL_CON) This connector connects to a LAN card with a W ake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (not required for onboard LAN model).
36 ASUS CUW -RM User ’ s Manual Connectors 3. H/W SETUP 3. HARDW ARE SETUP 13) IDE Activity LED Lead (2-pin IDELED) This connector supplies power to the cabinet ’ s IDE activity LED. Read and write activity by devices connected to the Primary or Secondary IDE connectors will cause the LED to light up.
ASUS CUW -RM User ’ s Manual 37 3. HARDW ARE SETUP Connectors 3. H/W SETUP 15) Standard and Consumer IR Connector (10-pin IR_CON) This connector supports an optional wireless transmitting and receiving infra- red module. This module mounts to a small opening on system cases that sup- port this feature.
38 ASUS CUW -RM User ’ s Manual Connectors 3. H/W SETUP 3. HARDW ARE SETUP 17) SMBus Connector (5-1 pin SMB) This connector allows you to connect SMBus (System Management Bus) de- vices. SMBus devices communicate by means of the SMBus with an SMBus host and/or other SMBus devices.
ASUS CUW -RM User ’ s Manual 39 3. HARDW ARE SETUP Connectors 3. H/W SETUP 19) Internal Audio Connectors ( 4 -pin VIDEO, AUX, CD, T AD ) only on audio model These connectors allow you to receive stereo audio input from such sound sources as a CD-ROM, TV tuner , or MPEG card.
40 ASUS CUW -RM User ’ s Manual Connectors 3. H/W SETUP 3. HARDW ARE SETUP 21) Chassis Intrusion Lead (2-pin ACHA) This lead is for a chassis designed for chassis intrusion detection. After -market toggle switches may also be installed to the chassis panel or on any removable components.
ASUS CUW -RM User ’ s Manual 41 3. HARDW ARE SETUP Connectors 3. H/W SETUP 23) Power Supply Thermal Sensor Connector (2-pin block JTPWR) If you have a power supply with thermal monitoring, connect its thermal sensor cable to this connector .
42 ASUS CUW -RM User ’ s Manual Connectors 3. H/W SETUP 3. HARDW ARE SETUP 24) System Power LED Lead (3-1 pin PLED) This 3-1 pin connector connects the system power LED, which lights when the system is powered on and blinks when it is in sleep mode.
ASUS CUW -RM User ’ s Manual 43 3. HARDW ARE SETUP Powering Up 3. H/W SETUP 3.9 Starting Up the First T ime 1. After all connections are made, close the system case cover .
ASUS CUW -RM User ’ s Manual 44 3. HARDW ARE SETUP Powering Up 3. H/W SETUP 7. During power-on, hold down <Delete> to enter BIOS setup. Follow the instructions in 4. BIOS SETUP . * Powering Off your computer: Y ou must first exit or shut down your operating system before switching of f the power switch.
4. BIOS SETUP 4.1 Managing and Updating Y our BIOS 4.1.1 Upon First Use of the Computer System It is recommended that you save a copy of the original motherboard BIOS along with a Flash Memory W riter utility (AFLASH.EXE) to a bootable floppy disk in case you need to reinstall the BIOS later .
ASUS CUW -RM User ’ s Manual 46 4. BIOS SETUP 4. BIOS SETUP Updating BIOS 5. Select 1. Save Current BIOS to File from the Main menu and press <Enter>. The Save Curr ent BIOS T o File screen appears. 6. T ype a filename and the path, for example, A:XXX-XX.
ASUS CUW -RM User ’ s Manual 47 4. BIOS SETUP 4. BIOS SETUP 6. When prompted to confirm the BIOS update, press Y to start the update. 7. The utility starts to program the new BIOS information into the flash ROM. The boot block will be updated automatically only when neces- sary .
ASUS CUW -RM User ’ s Manual 48 4. BIOS SETUP 4. BIOS SETUP Updating BIOS (This page was intentionally left blank.).
ASUS CUW -RM User ’ s Manual 49 4. BIOS SETUP 4. BIOS SETUP 4.2 BIOS Setup Program This motherboard supports a programmable EEPROM that can be updated using the provided utility as described in 4.
ASUS CUW -RM User ’ s Manual 50 4. BIOS SETUP 4. BIOS SETUP 4.2.1 BIOS Menu Bar The top of the screen has a menu bar with the following selections: MAIN Use this menu to make changes to the basic system configuration. ADV ANCED Use this menu to enable and make changes to the advanced features.
ASUS CUW -RM User ’ s Manual 51 4. BIOS SETUP 4. BIOS SETUP General Help In addition to the Item Specific Help window , the BIOS setup program also pro- vides a General Help screen. This screen can be called up from any menu by sim- ply pressing <F1> or the <Alt> + <H> combination.
ASUS CUW -RM User ’ s Manual 52 4. BIOS SETUP 4. BIOS SETUP System Time [XX:XX:XX] Sets your system to the time that you specify (usually the current time). The format is hour , minute, second. V alid values for hour , minute and sec- ond are Hour: (00 to 23), Minute: (00 to 59), Second: (00 to 59) .
ASUS CUW -RM User ’ s Manual 53 4. BIOS SETUP 4. BIOS SETUP NOTE: Before attempting to configure a hard disk drive, make sure you have the configuration information supplied by the manufacturer of the drive. Incorrect settings may cause your system to not recognize the in- stalled hard disk.
ASUS CUW -RM User ’ s Manual 54 4. BIOS SETUP 4. BIOS SETUP IMPORT ANT : If your hard disk was already formatted on an older previous system, incorrect parameters may be detected. Y ou will need to enter the correct parameters manually or use low-level format if you do not need the data stored on the hard disk.
ASUS CUW -RM User ’ s Manual 55 4. BIOS SETUP 4. BIOS SETUP Master/Slave Drives Head This field configures the number of read/write heads. Refer to your drive documenta- tion to determine the correct value to enter into this field.
ASUS CUW -RM User ’ s Manual 56 4. BIOS SETUP 4. BIOS SETUP Other options for “ Type: ” are: [CD-ROM] - for IDE CD-ROM drives [LS-120] - for LS-120 compatible floppy disk drives [ZIP-100] - for .
ASUS CUW -RM User ’ s Manual 57 4. BIOS SETUP 4. BIOS SETUP Main Menu Forgot the password? If you forgot the password, you can clear the password by erasing the CMOS Real Time Clock (R TC) RAM. The RAM data containing the password information is powered by the onboard button cell battery .
ASUS CUW -RM User ’ s Manual 58 4. BIOS SETUP 4. BIOS SETUP 4.4 Advanced Menu CPU Internal Frequency [Manual] When the motherboard is set to JumperFree ™ mode, this field allows you to select the internal frequency of your CPU. Select [Manual] if you want to make changes to the subsequent 3 fields.
ASUS CUW -RM User ’ s Manual 59 4. BIOS SETUP 4. BIOS SETUP Advanced Menu CPU Vcore This field displays the core voltage supplied to the CPU. If you want to set it manually , always refer to the CPU docu- mentation.
ASUS CUW -RM User ’ s Manual 60 4. BIOS SETUP 4. BIOS SETUP Notes for JumperFree Mode CPU Upgrade/Reinstallation T o ensure that your system can enter BIOS setup after the processor has been changed.
ASUS CUW -RM User ’ s Manual 61 4. BIOS SETUP 4. BIOS SETUP System Hangup If your system crashes or hangs due to improper frequency settings, power OFF your system and restart. The system will start up in safe mode running at a bus speed of 66MHz and enter BIOS setup.
ASUS CUW -RM User ’ s Manual 62 4. BIOS SETUP 4. BIOS SETUP Chip Configuration SDRAM Configuration [By SPD] This sets the optimal timings for items 2 – 4, depending on the memory mod- ules that you are using. Default setting is [By SPD], which configures items 2 – 4 by reading the contents in the SPD (Serial Presence Detect) device.
ASUS CUW -RM User ’ s Manual 63 4. BIOS SETUP 4. BIOS SETUP SDRAM RAS Precharge Time This controls the idle clocks after issuing a prechar ge command to the SDRAM. NOTE: T o make changes to this field, the SDRAM Configura- tion field must be set to [User Define].
ASUS CUW -RM User ’ s Manual 64 4. BIOS SETUP 4. BIOS SETUP Onboard AC97 Modem Controller, Audio Controller [Auto] [Auto] allows the motherboard ’ s BIOS to detect whether you are using any modem/ audio device.
ASUS CUW -RM User ’ s Manual 65 4. BIOS SETUP 4. BIOS SETUP I/O Device Config UART2 Use Standard Infrared [Disabled] When enabled, this field activates the onboard standard infrared feature and sets the second serial UAR T to support the infrared module connector on the motherboard.
ASUS CUW -RM User ’ s Manual 66 4. BIOS SETUP 4. BIOS SETUP Slot 1, Slot 2, Slot 3 IRQ [Auto] These fields set how IRQ use is determined for each PCI slot. The default setting for each field is [Auto], which utilizes auto-routing to determine IRQ use.
ASUS CUW -RM User ’ s Manual 67 4. BIOS SETUP 4. BIOS SETUP PCI Configuration USB Function [Enabled] This motherboard supports Universal Serial Bus (USB) devices.
ASUS CUW -RM User ’ s Manual 68 4. BIOS SETUP 4. BIOS SETUP DMA x Used By ISA [No/ICU] These fields indicate whether or not the displayed DMA channel for each field is being used by a legacy (non-PnP) ISA card.
ASUS CUW -RM User ’ s Manual 69 4. BIOS SETUP 4. BIOS SETUP Shadow Configuration Video ROM BIOS Shadow [Enabled] This field allows you to change the video BIOS location from ROM to RAM. Relocating to RAM enhances system performance, as information access is faster than the ROM.
ASUS CUW -RM User ’ s Manual 70 4. BIOS SETUP 4. BIOS SETUP 4.5 Power Menu The Power menu allows you to reduce power consumption. This feature turns of f the video display and shuts down the hard disk after a period of inactivity . Power Management [User Define] This option must be enabled to use any of the automatic power saving features.
ASUS CUW -RM User ’ s Manual 71 4. BIOS SETUP 4. BIOS SETUP Power Menu Video Off Option [Suspend -> Off ] This field determines when to activate the video of f feature for monitor power management. Configuration options: [Always On] [Suspend -> Of f] Video Off Method [DPMS OFF] This field defines the video of f features.
ASUS CUW -RM User ’ s Manual 72 4. BIOS SETUP 4. BIOS SETUP AC PWR Loss Restart [Disabled] This allows you to set whether you want your system to reboot after the power has been interrupted. [Disabled] leaves your system off and [En- abled] reboots your system.
ASUS CUW -RM User ’ s Manual 73 4. BIOS SETUP 4. BIOS SETUP Power Up Control Wake On PS2 KB/PS2 Mouse/CIR [Disabled] Set this field to [Enabled] if you wish to use your PS2 keyboard, PS2 mouse, or Consumer IR device to power up your computer . This feature requires an A TX power supply that can supply at least 300mA on the +5VSB lead.
ASUS CUW -RM User ’ s Manual 74 4. BIOS SETUP 4. BIOS SETUP 4.5.2 Hardware Monitor MB Temperature, CPU Temperature [xxxC/xxxF] The onboard hardware monitor is able to detect the MB (motherboard) and CPU temperatures. Set to [Ignore] only if necessary .
ASUS CUW -RM User ’ s Manual 75 4. BIOS SETUP 4. BIOS SETUP Boot Menu Boot Sequence The Boot menu allows you to select among the four possible types of boot devices listed using the up and down arrow keys. By using the <+> or <Space> key , you can promote devices and by using the <-> key , you can demote devices.
ASUS CUW -RM User ’ s Manual 76 4. BIOS SETUP 4. BIOS SETUP Plug & Play O/S [No] This field allows you to use a Plug-and-Play (PnP) operating system to con- figure the PCI bus slots instead of using the BIOS. When [Y es] is selected, interrupts may be reassigned by the OS.
ASUS CUW -RM User ’ s Manual 77 4. BIOS SETUP 4. BIOS SETUP Exit Menu Exit Saving Changes Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM. The CMOS RAM is sustained by an onboard backup battery and stays on even when the PC is turned of f.
ASUS CUW -RM User ’ s Manual 78 4. BIOS SETUP 4. BIOS SETUP Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When this option is selected or if <F5> is pressed, a confirmation is requested.
ASUS CUW -RM User ’ s Manual 79 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5. SOFTW ARE SETUP 79 5.1 Operating Systems Although ASUS motherboards passed testing on several operating systems, the op- erating system shown in these sections will be that of Microsoft ’ s W indows 98.
80 ASUS CUW -RM User ’ s Manual 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 (This page was intentionally left blank.).
ASUS CUW -RM User ’ s Manual 81 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5.3 ASUS Smart Motherboard Support CD NOTE: The support CD contents are subject to change at any time without notice. T o begin using your support CD disc, just insert it into your CD-ROM drive and the support CD installation menu should appear .
82 ASUS CUW -RM User ’ s Manual 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5.4 INF Update Utility for 810 Chipset Insert the Support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the setup screen.
ASUS CUW -RM User ’ s Manual 83 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5.5 VGA Driver Setup Insert the Support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the setup screen.
84 ASUS CUW -RM User ’ s Manual 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5.6 Audio Driver Setup Insert the Support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the setup screen.
ASUS CUW -RM User ’ s Manual 85 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5.7 Intel Security Driver Insert the Support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the setup screen.
86 ASUS CUW -RM User ’ s Manual 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5.8 LDCM Local Setup System Requirements • Intel ® Pentium ® microprocessor or higher . • Operating system: Microsoft W indows 95 (can be OEM Service Release 2), or W indows 98, or W indows NT 4.
ASUS CUW -RM User ’ s Manual 87 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 (7) Click her e. (8) Click her e. (9) Click her e. (10) Click here and then follow the online instruction to finish installation.
88 ASUS CUW -RM User ’ s Manual 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5.9 LDCM Administrator Setup System Requirements • Intel ® Pentium ® microprocessor or higher . • Operating system: Microsoft W indows 95 (can be OEM Service Release 2), or W indows 98, or W indows NT 4.
ASUS CUW -RM User ’ s Manual 89 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 (1 1) Click her e. (12) Click here. (8) Click her e. (7) Click here. (5) Click here only after you have car efully read the license agr eement. ( 6) Click here. (9) Click her e.
90 ASUS CUW -RM User ’ s Manual 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5.10 ASUS PC Probe Insert the Support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the setup screen.
ASUS CUW -RM User ’ s Manual 91 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 (7) Click her e. ( 8) Click here. (9) Click here. (10) Click here..
92 ASUS CUW -RM User ’ s Manual 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5.1 1 ASUS LiveUpdate Insert the Support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the setup screen.
ASUS CUW -RM User ’ s Manual 93 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5.12 Y AMAHA S-YXG50 Insert the Support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the setup screen.
94 ASUS CUW -RM User ’ s Manual 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5.13 Y AMAHA XGStudio Insert the Support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the setup screen.
ASUS CUW -RM User ’ s Manual 95 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5.14 PC-cillin 98 Insert the Support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the setup screen. (2) Click here.
96 ASUS CUW -RM User ’ s Manual 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5.15 Adobe Acrobat Reader V4.0 Insert the Support CD that came with your motherboard into your CD-ROM drive or double-click the CD drive icon in My Computer to bring up the setup screen.
ASUS CUW -RM User ’ s Manual 97 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 5.16 Uninstalling Programs Add/Remove Programs is a basic component within W indows. Y ou may use this function if a program does not provide its own uninstall program. (1 ) Double-click here to open the Add/Remove Programs Properties dialog box.
98 ASUS CUW -RM User ’ s Manual 5. SOFTW ARE SETUP 5. S/W SETUP Windows 98 (This page was intentionally left blank.).
6. SOFTW ARE REFERENCE 6. S/W REFERENCE Windows 98 6.1 Display Properties The motherboard ’ s built-in 2D/3D AGP VGA supports professional graphics de- sign, gaming, learning, and business applications.
ASUS CUW -RM User ’ s Manual 100 6. SOFTW ARE REFERENCE 6. S/W REFERENCE Windows 98 Monitor Shows what type of monitor you are currently using. T o install the software for a new moni- tor , click Change . Performance Specifies the degree of acceleration you want for your graphics hardware.
ASUS CUW -RM User ’ s Manual 101 6. SOFTW ARE REFERENCE 6. S/W REFERENCE Windows 98 Information Gives information on your graphics device such as chipset, memory , BIOS, and drivers. Internet links are also available for easy ac- cess to the ASUS W eb page for new updated drivers and notices.
ASUS CUW -RM User ’ s Manual 102 6. SOFTW ARE REFERENCE 6. S/W REFERENCE Windows 98 Adjustment Allows you to adjust the display position, size, and refresh rate. Change current r efr esh rate Allows you to adjust the currently displayed resolution refresh rate.
ASUS CUW -RM User ’ s Manual 103 6. SOFTW ARE REFERENCE 6. S/W REFERENCE Windows 98 6.2 ASUS PC Probe ASUS PC Probe is a convenient utility to continuously monitor your com- puter system ’ s vital components, such as fan rotations, V oltages, and tem- peratures.
ASUS CUW -RM User ’ s Manual 104 6. SOFTW ARE REFERENCE 6. S/W REFERENCE Windows 98 6.2.2 Using ASUS PC Probe Monitoring Monitor Summary Shows a summary of the items being monitored.
ASUS CUW -RM User ’ s Manual 105 6. SOFTW ARE REFERENCE 6. S/W REFERENCE Windows 98 Information Settings Lets you set threshold levels and polling intervals or refresh times of the PC ’ s tem- perature, fan rotation, and voltages. History Lets you record the current monitoring activity of a certain component of your PC for future reference.
ASUS CUW -RM User ’ s Manual 106 6. SOFTW ARE REFERENCE 6. S/W REFERENCE Windows 98 Device Summary Shows a summary of devices in your PC. DMI Explor er Shows information pertinent to the PC, such as CPU type, CPU speed, and in- ternal/external frequencies, and memory size.
ASUS CUW -RM User ’ s Manual 107 6. SOFTW ARE REFERENCE 6. S/W REFERENCE Windows 98 6.2.3 ASUS PC Probe T ask Bar Icon When the ASUS PC Probe senses a problem with your PC, portions of the ASUS PC Probe icon changes to red, the PC speaker beeps, and the ASUS PC Probe monitor is displayed.
ASUS CUW -RM User ’ s Manual 108 6. SOFTW ARE REFERENCE 6. S/W REFERENCE Windows 98 6.3 ASUS LiveUpdate ASUS LiveUpdate is a utility that allows you to update your motherboard ’ s BIOS and drivers. The use of this utility requires that you are properly con- nected to the Internet through an I nternet S ervice P rovider (ISP).
ASUS CUW -RM User ’ s Manual 109 6. SOFTW ARE REFERENCE 6. S/W REFERENCE Windows 98 Closes the player . NOTE: Y ou can also close the player by pressing <Alt>+<F4>. Minimizes the player to an icon. Displays the Set Play List dialog box where you can create a list of songs to play auto- matically .
ASUS CUW -RM User ’ s Manual 110 6. SOFTW ARE REFERENCE 6. S/W REFERENCE Windows 98 Smart Arranger Image Switcher Assign Slider Master V olume Slider Exit Song Image Display Area Minimize T ranspose Display Panel T empo Display Panel Select Previous Play Pause Stop Song Name Display Panel Slider Function Realtime Slider V oice Select 6.
ASUS CUW -RM User ’ s Manual 111 6. SOFTW ARE REFERENCE 6. S/W REFERENCE Windows 98 Smart Arranger The Smart Arranger allows you to easily change the mood of a song. Y ou can switch between seven ensemble voice sets with these buttons. T o return to the original voice set, click .
ASUS CUW -RM User ’ s Manual 112 6. SOFTW ARE REFERENCE 6. S/W REFERENCE Windows 98 6.6 Hardware Information (1) Click her e..
7. APPENDIX 7.1 PCI-L101 Fast Ethernet Card LAN Activity Output Signal RJ45 LEDs Motherboard type Wake on LAN Output Signal ASUS Other Intel Chipset If you are using the ASUS PCI-L101 on an ASUS motherboard, leave the jumper on its defaut setting of “ ASUS.
ASUS CUW -RM User ’ s Manual 114 7. APPENDIX 7.1.1 Features • Intel 82558 Ethernet LAN Controller (Fully integrated 10BASE-T/100BASE-TX) • W ake-On-LAN Remote Control Function Supported • PCI Bus Master Complies to PCI Local Bus Rev . 2.1 specifications • Consists of MAC & PHY (10/100Mbps) interfaces • Complies to IEEE 802.
ASUS CUW -RM User ’ s Manual 115 7. APPENDIX 7. APPENDIX Modem Riser 7.2.3 Hardware Installation Procedure 7.2 Modem Riser 7.2.1 56K Software Modem The Modem Riser (MR) is a high-speed PC communication peripheral which works with AMC ’ 97/MC ’ 97 compliant codecs.
ASUS CUW -RM User ’ s Manual 116 7. APPENDIX 7. APPENDIX Modem Riser 7.2.4 Software Setup in Windows 98 The Modem Riser supports the Plug and Play feature. It allows your computer to automatically set the optimal configurations for the MR and communication soft- ware.
ASUS CUW -RM User ’ s Manual 117 7 . APPENDIX Glossary 7. APPENDIX 7.3 Glossary 1394 1394 is the IEEE designation for the high performance serial bus at 12.5, 25 or 50MBytes/sec speeds. This serial bus defines both a back plane physical layer and a point-to-point cable-connected virtual bus.
ASUS CUW -RM User ’ s Manual 118 7. APPENDIX 7. APPENDIX Glossary AUTOEXEC.BA T AUTOEXEC.BA T is a special-purpose file that is automatically executed by DOS whenever the computer is turned ON or restarted. This file contains important com- mands that help configure the system to work with certain software and devices.
ASUS CUW -RM User ’ s Manual 119 7 . APPENDIX Glossary 7. APPENDIX Device Driver A device driver is a special set of instructions that allows the computer ’ s operating system to communicate with devices such as VGA, audio, printer , or modem.
ASUS CUW -RM User ’ s Manual 120 7. APPENDIX 7. APPENDIX Glossary Peripherals Peripherals are devices attached to the computer via I/O ports. Peripheral devices allow your computer to perform an almost limitless variety of specialized tasks.
ASUS CUW -RM User ’ s Manual 121 7 . APPENDIX Glossary 7. APPENDIX SPD for SDRAM module Serial Presence Detect (SPD) is most like an ID detect for SDRAM module, it using a EEPROM component on DIMM module for storing module configuration infor - mation inside.
ASUS CUW -RM User ’ s Manual 122 7. APPENDIX 7. APPENDIX Glossary (This page was intentionally left blank.).
ASUS CUW -RM User ’ s Manual 123 INDEX A AC PWR Loss Restart 72 Adobe Acrobat Reader 97 ASUS LiveUpdate Setup 92 Using 108 ASUS PC Probe Setup 91 Using 103 A T API CD-ROM 75 A TX Power Supply Connec.
124 ASUS CUW -RM User ’ s Manual F Fan Connectors 36 Floppy 3 Mode Support 52 Floppy Disk Access Control 64 Floppy Disk Drive Connector 34 Full Screen Logo 76 G Glossary 1 17 H Halt On 57 Hardware I.
ASUS CUW -RM User ’ s Manual 125 Onboard Serial Port 1 64 Onboard Serial Port 2 64 Onboard VGA 63 Operating Systems 79 OS/2 Onboard Memory > 64M 59 Other Boot Device Select 75 P Parallel Port Con.
126 ASUS CUW -RM User ’ s Manual INDEX System Memory 24 System T ime 52 T Thermal Sensor Connector 41 T ranslation Method 54 T ype 53 U UAR T2 Use Standard Infrared 65 Ultra DMA Mode 55 Uninstalling.
® Goes Mobile! Goes Mobile! Goes Mobile! Goes Mobile! Goes Mobile! F7400 Series Professional Notebook PC 14.1 ” TFT Color Display 300/333/366/400+MHz Built-in DVD/MPEG2 Decoder L7300/7200 Series All-in-One Compact Notebook PC 13.3 ” or 12.1 ” TFT Color Display 300/333/366/400+MHz M8300/8200 Series Thin & Light Convertible Notebook PC 13.
® Ultra-Fast CD-ROM Drive Interface T ype: A T API/Enhanced IDE supporting PIO mode 4, multi- word DMA mode 2, UltraDMA/33 Disc Formats: Audio CD, CD-ROM (mode 1 & mode 2), Mixed mode, CD-ROM/XA .
Ein wichtiger Punkt beim Kauf des Geräts Asus CUW-RM (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Asus CUW-RM noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Asus CUW-RM - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Asus CUW-RM reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Asus CUW-RM erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Asus CUW-RM besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Asus CUW-RM verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Asus CUW-RM. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Asus CUW-RM gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
