Benutzeranleitung / Produktwartung LCD4000 des Produzenten Mitsubishi
Zur Seite of 37
LCD4000 40" LCD Colour Monitor User’ s Man ual.
Index Declaration of conf ormity ...................................................................................................... .......................... English-1 Impor tant Inf or mation .....................................................
English -1 English DECLARA TION OF CONFORMITY This device complies with P ar t 15 of FCC Rules. Operation is subject to the f ollowing two conditions. (1) This device ma y not cause har mful interference , and (2) this device must accept an y interference received, including interf erence that may cause undesired operation.
English-2 Dec laration Declaration of the Man ufacturer We hereb y cer tify that the colour monitor LCD4000 is in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC.
English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NO TE THE FOLLO WING WHEN SETTING UP AND USING THE LCD4000 LCD COLOUR MONIT OR: • DO NO T OPEN THE MONITOR . There are no user ser viceable parts inside and opening or removing cov ers may e xpose you to dangerous shoc k hazards or other risks.
English-4 REMOTE CONTROLLER RU-M104 Contents P ower Cord User ’ s Man ual PC - Video Signal Cable (D-SUB to D-SUB Cable) Wireless Remote Control and AA Batteries Clamper x 2 Y our new LCD4000 LCD mo.
English-5 English 7 DO WN ( ) button Activates the OSM men u when the OSM menu is turned-off. Acts as button to mo ve the highlighted area down to select the adjustment with OSM menu. 8 EXIT button Activates the OSM men u when the OSM menu is turned-off.
English-6 T erminal Panel 6 A UDIO IN 1, 2, 3 T o input audio signal from e xternal equipment such as a computer , VCR or D VD player . 7 A UDIO OUT T o output the audio signal from the A UDIO IN 3 jack. 8 VIDEO VIDEO IN connector (BNC and RCA): T o input a composite video signal.
English-7 English 1 PO WER button Switches the pow er on/off. * If P ower Indicator is not glo wing, then none of the controls will work. 2 INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [D VD/HD], [VIDEO]. 3 A UDIO INPUT button Selects from input audio signal, [A UDIO1], [A UDIO2], [A UDIO3].
English-8 P oint the top of the remote control toward the LCD monitor ’ s remote sensor during button operation. Use the remote control within a distance of about 7 m from the front of the LCD monitor ’ s remote control sensor and at a horizontal and ver tical angle of within 30 ° within a distance of about 3 m.
English-9 English 1. Determine the installation location CA UTION: DO NOT A TTEMPT TO INST ALL THE LCD MONIT OR BY Y OURSELF Installing your LCD displa y must be done by a qualified technician. Contact your dealer f or more information. CA UTION: MO VING OR INST ALLING THE LCD MONIT OR MUST BE DONE BY TW O OR MORE PEOPLE.
English-10 T o av oid falling down F asten the LCD monitor to wall or pillar with a cord or chain which is sufficient to suppor t the weight of the LCD monitor (appro x.
English-11 English Hole of stand Claw of Monitor Stand Screw M5 x 40 How to install stand 1. Please turn monitor off. 2. Inser t claws of monitor to stand holes until clicks . 3. F asten 2 screws (M5 x 40) of both side. T orque 280 ~ 300N cm How to remo ve the stand 1.
English-12 Mounting P osition of Ferrite Core F errite Core T o connector of PC T o A UDIO 1 of monitor Attaching the Ferrite Core Attach the Ferrite Core to PC A udio Cable and S-VIDEO Cable. Use of the cable without mounting the f err ite core will result in the occurrence of noise.
English-13 English Connecting a P ersonal Computer Connecting your computer to y our LCD monitor will enable you to displa y your computer ’ s screen image.
English-14 Connecting your Macintosh ® computer to y our LCD monitor will enable y ou to display your computer ’ s screen image. Some video cards or drivers ma y not display images correctly .
English-15 English LCD monitor Equipment with a digital interface such as a personal computer with RGB output (TMDS) D VI-D connector D VI-D connector T o D VI output T o audio output Connections can be made with equipment that is equipped with a digital interface compliant with the D VI (Digital Visual Interf ace) standard.
English-16 T o VIDEO IN BNC RCA VCR or Laser disc play er T o VIDEO IN LCD monitor (second monitor) BNC RCA DIN 4 pin DIN 4 pin T o VIDEO OUT T o S-VIDEO OUT LCD monitor T o audio right output Connecting your VCR or laser disc play er to your LCD monitor will enable y ou to display your VCR ’ s or laser disc play er ’ s video .
English-17 English Connecting your D VD pla yer to your LCD monitor will enab le you to display D VD video. Ref er to your D VD player user ’ s manual f or more inf ormation. Connect the LCD Monitor to a D VD Play er • T o connect the RGB 3 D VD/HD In connector (BNC) on the LCD monitor , use a separately av ailable BNC connector cable .
English-18 Y ou can connect your stereo amplifier to your LCD monitor . Refer to y our amplifier user ’ s manual f or more information. Connect the LCD Monitor to a Stereo Amplifier • T urn on the LCD monitor and the amplifier only after all connections have been made .
English-19 English Basic Operation P ower ON and OFF Modes The LCD monitor power indicator will turn green while pow ered on, or red when in off mode. The monitor can be powered on or off using the f ollowing three options: 1. Pressing the power b utton.
English-20 P ower Indicator Using P ower Management The LCD monitor follo ws the VESA appro ved DPMS P ower Management function. The power management function is an energy sa ving function that automatically reduces the power consumption of the display when the k eybord or the mouse has not been used for a fix ed period.
English-21 English OSM (On-Screen-Manager) Contr ols - Computer Input Press UP or DOWN b utton to select sub-menu Press SET button to decide Press UP or DOWN, and PLUS or MINUS button to select functi.
English-22 T o adjust the colour temperature of entire screen. COLOR Adjusting power colour temper ature make the screen TEMPERA TURE reddish and adjusting higher colour temperature make the screen bluish. Selecting Picture reset allows you to reset all OSM settings related to PICTURE.
English-23 English Main-Menu PICTURE IN PICTURE Sub-Menu Selecting the size of picture inserted at the “ Picture-in Picture ” (PIP) mode. PIP SIZE “ Large ” , “ Middle ” , “ Small ” and “ REMOTE-PIP ” are av ailable. Selecting the sound source in PIP mode.
English-24 Selecting the power management ON/OFF mode . PO WER SA VE OSM control menus are av ailable in se ven languages. LANGU A GE In the OSM Time menu, you can select how long the OSM information will sta y after Display ke y push. OSM TIME A time between 3 and 30 seconds, is a vailable .
English-25 English OSM (On-Screen-Manager) Contr ols - D VD&HD Input Main-Menu A UDIO Sub-Menu T o accentuate or quiet the high frequency sound. TREBLE Press + button to increase TREBLE sound. Press - button to decrease TREBLE sound. T o accentuate or quiet the low frequency sound.
English-26 Main-Menu PICTURE IN PICTURE Sub-Menu Selecting the size of picture inserted at the “ Picture-in Picture ” (PIP) mode. PIP SIZE “ Large ” , “ Middle ” , and “ Small ” are av ailable.
English-27 English OSM (On-Screen-Manager) Contr ols - A V Input Main-Menu PICTURE Sub-Menu Adjusts the over all image and background screen brightness. BRIGHTNESS Press + button to increase brightness. Press - button to decrease brightness. Adjusts the image brightness in relation to the back ground CONTRAST Press + button to increase contrast.
English-28 Main-Menu A UDIO Sub-Menu T o accentuate or quiet the high frequency sound. TREBLE Press + button to increase TREBLE sound. Press - button to decrease TREBLE sound. T o accentuate or quiet the low frequency sound. BASS Press + b utton to increase BASS sound.
English-29 English T o select OFF TIMER mode ON/OFF . OFF TIMER In the OFF TIMER menu, you can select monitor auto turn off time after monitor has been tur ned on. A time between 1 and 24 hours, is a vailable . T o select SCREEN SA VER mode, select ON/OFF .
English-30 Contr olling the LCD monitor via RS-232C Remote Control This LCD monitor can be remote controlled by connecting a computer with RS-232C interf ace. The follo wing functions can be controlled by a computer : • T urn the monitor ON or OFF .
English-31 English 3) Control sequence (1) The command from a computer to the LCD monitor will be sent within 400ms. (2) The LCD monitor will send a return command 400ms* after it has received and e x ecuted a code. If the command isn ’ t received correctly , the LCD monitor will not send the return command.
English-32 Features Reduced Footprint: Provides the ideal solution f or environments requiring superior image quality but with size and weight limitations. The monitor ’ s small footprint and low weight allow it to be mo v ed or transpor ted easily from one location to another .
English-33 English T r oubleshooting No picture • The signal cable should be completely connected to the displa y card/computer. • The display card should be completely seated in its slot. • F ront P ower Switch and computer po wer switch should be in the ON position.
English-34 Specifications f or LCD4000 Product Specifications Analog Input Digital Input LCD Module (40" / 101.6cm diagonal) Pixel Pitch: 0.681mm Resolution: 1280 x 768 dots (WXGA) Colour : 16,777,216 Brightness: 450cd/m 2 (T yp.
English-35 English Pin Assignment 1) Analog RGB input (MiniDsub15p): R G B 2 Pin No Name 1 Video Signal Red 2 Video Signal Green 3 Video Signal Blue 4 GND 5 DDC-GND 6 Red-GND 7 Green-GND 8 Blue-GND 9N.
Ein wichtiger Punkt beim Kauf des Geräts Mitsubishi LCD4000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mitsubishi LCD4000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mitsubishi LCD4000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mitsubishi LCD4000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mitsubishi LCD4000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mitsubishi LCD4000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mitsubishi LCD4000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mitsubishi LCD4000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mitsubishi LCD4000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
