Benutzeranleitung / Produktwartung HRIGODH des Produzenten Makita
Zur Seite of 20
Cordless Rotary Hammer Equipped with electric brake 16 mm (5/8”) MODEL HRIGODH 16 mm (518”) MODEL HRl6ODWH With Fast Charger INSTRUCTION MANUAL 13 mm (112”) SPEC I FI CAT1 0 N S Model HRIGODH 20 mm 16 mm ~ 950 ~~ 3,600 296 mm x 70 mm x 232 mm 2.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. 2.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch. Be sure switch is OFF when plugging in.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage to the tool.
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGE Length of Cord (Feet) AWG Size of Cord I. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
ADDITIONAL SAFETY RULES 1. Wear a hard hat (safety helmet), safety glasses and/or face shield. It is also highly recommended that you wear a dust mask, ear protectors and thickly padded gloves. 2. Be sure the bit is secured in place before operation. 3.
Installing or removing the battery cartridge Always switch off the tool before insertion or removal of the battery cartridge. To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool.
Side grip (auxiliary handle) The side grip swings around to either side, allowing easy handling of the tool in any position. Loosen the side grip by turning it counterclockwise, swing it to the desired position and then tighten it by turning clockwise.
Turn the change ring in the direction of the arrow until the 1 mark on the change ring is aligned with 0 mark on the rubber cap to secure the bit. Depth gauge The depth gauge is convenient for drilling holes of uniform depth. Insert the depth gauge into the hole in the grip base.
Reversing switch action I This tool has a reversing switch to change the direction of rotation. Move the lever to the ' position for clockwise rotation or the * position for counterclockwise rotation u Switch trigger ~ CAUTION: Always check the direction of rotation before operation.
Torque limiter The torque limiter will actuate when a certain torque level is reached. The motor will disengage from the output shaft. When this happens, the bit will stop turning. CAUTIO N : As soon as the torque limiter actuates, switch off the tool immediately.
6. Rotate the chisel so that the chisel faces toward the direction suitable for your work. Then secure the chisel and chisel dapter to the tool using the clamp screw on the chisel adapter. 7. Set the action mode changing knob to "hammering only".
CAUTIO N : Never use "rotation with hammering" when the drill chuck assembly is installed on the tool. The drill chuck assembly may be damaged. Also, the drill chuck will come off when reversing the tool. NOTE: If you need assembled the drill chuck and chuck adapter assembly, proceed as follows.
MAINTENANCE CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replace- ment parts.
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Bit grease 100 g; 3.5 oz Part No 181 573-3 Dust cup Part No. 421342-3 Dust extractor attachment Part No. 1921 76-8 Plastic carrying case Part No. 824445-6 Stopper pole Part No. 321 144-6 Safety goggle Grey lens: Part No. 191684-A Clean lens: Part No. 191685-A Fast charger Model DC1201 Part No.
Sep -08-'94 US CORDLESS ROTARY HAMMER Model HRIGODH Note: The switch and other part configurations may differ from country to country. 18.
MODEL HHlGODH Sep -08-'94 US ~~ MACHINF 11 158 37 431 __ 7:' , 1 OR~nqli IFOM ED DESCRIPTION MhE 37 1 38 I 1 39 j 1 40 1 41 1 42 ~ 1 43 ~ 1 44 1 45 ~ 1 48 , 1 46 1 41 1 49 1 50 1 51 1 52 ~ 1.
The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. i Ni-Cd To recycle the battery: 1. Remove the battery from the tool 2.
Ein wichtiger Punkt beim Kauf des Geräts Makita HRIGODH (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Makita HRIGODH noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Makita HRIGODH - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Makita HRIGODH reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Makita HRIGODH erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Makita HRIGODH besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Makita HRIGODH verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Makita HRIGODH. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Makita HRIGODH gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
