



















1 Rear cover 2 Battery Cartridge 3 Switch 4 Nozzle 5 Cleaner body
6 Extension wand (Straight pipe) 7 Corner nozzle 8 Front cover 9 Depress 10 Open
11 Dust bag 12 Hook front cover onto front lip 13 Close 14 Front lip
Model 4073D Capacity 500 ml Continuous use
Battery 7000 High: Approx. 10 min.
Low: Approx. 20 min. Battery 7002 High: Approx. 15 min.
Low: Approx. 30 min. Overall length 383 mm Net weight 1.1 kg Output D.C. 7.2 V
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum battery life 1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the bat- tery cartridge when you notice less tool power. 2. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. 3. Charge the battery cartridge with room tempera- ture at 10°C – 40°C (50°F – 104°F). Let a hot bat- tery cartridge cool down before charging it. 4. Charge the Nickel Metal Hydride battery car- tridge when you do not use it for more than six months.
Intended use The tool is intended for collecting dry dust.
Safety hints For your own safety, please refer to enclosed safety instructions.
ADDITIONAL SAFETY RULES FOR CLEANER 1. Do not pick up wet materials, lit cigarettes or the like. 2. Stop operation immediately if you notice any- thing abnormal. 3. If you drop or strike the cleaner, check it care- fully for cracks or damage before operation. 4. Do not charge the cleaner close to dangerous flammable materials such as gasoline, gas, paint or adhesives. 5. Do not charge the cleaner on papers, cloth, car- pet, vinyl, etc. This may cause a fire. 6. Do not charge the cleaner in a dusty place. 7. Be sure no one is below when using the cleaner in high locations. 8. Do not bring close to stoves or other heat sources. 9. Do not block the intake hole or vent holes.
ENC004-1 1. Before using battery cartridge, read all instruc- tions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 2. Do not disassemble battery cartridge. 3. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. 4. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. 5. Always cover the battery terminals with the bat- tery cover when the battery cartridge is not used. 6. Do not short the battery cartridge: (1) Do not touch the terminals with any conduc-
tive material. (2) Avoid storing battery cartridge in a container
SAVE THESE INSTRUCTIONS.
with other metal objects such as nails, coins, etc. (3) Do not expose battery cartridge to water or
rain. A battery short can cause a large current flow, overheating, possible burns and even a break- down.

Installing dust bag Place the dust bag into the cleaner cavity. (Fig. 11)
Insert the holder of the dust bag all the way into the slots in the cleaner cavity. (Fig. 12)
Hook the front cover onto the front lip of the cleaner. Then close the front cover. (Fig. 13)
After use (Fig. 14) When storing the cleaner, hang it from a nail using the convenient hanger in back.
This cleaner can be operated in “standard” and “strong” suction. For standard suction, slide the switch forward to the LOW position. For strong suction, slide the switch fur- ther to the HIGH position. To stop the cleaner, slide the switch back to the OFF position.
Cleaning (Fig. 15) From time to time wipe off the outside (cleaner body) of the cleaner using a cloth dampened in soapy water. Never use gasoline, thinner or the like. Discoloration or cracks may result. Wash the dust bag in soapy water occasionally. Dry it out thoroughly before use. An insufficiently dried bag may cause poor suction and shorten the service life of the motor.
Nozzle (Fig. 4) Attach the nozzle to clean off tables, desks, furniture, etc. Nozzle slips on easily.
Nozzle + Extension wand (Straight pipe) (Fig. 5) The extension wand fits in between the nozzle and the cleaner itself. This arrangement is convenient for clean- ing a floor while standing erect.
To maintain product safety and reliability, repairs, mainte- nance or adjustment should be carried out by Makita Authorized Service Center.
Corner nozzle (Fig. 6) Fit on the corner nozzle for cleaning corners and crevices of a car or furniture.
Corner nozzle + Extension wand (Straight pipe) (Fig. 7) In tight quarters where the cleaner itself cannot squeeze in, or in high places hard to reach, use this arrangement.
If you need any assistance for more details regarding these accessories, ask your local Makita service center.
Depress the buttons and open the front cover. (Fig.8)
Take the dust bag out of the cleaner carefully so that the contents will not spill out. Empty the contents out of the dust bag. (Fig. 9)
Also empty out the dust inside the cleaner itself. Failure to do so may cause the sponge filter to be clogged or the motor to be damaged. (Fig. 10)
Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.
Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.