Benutzeranleitung / Produktwartung QLR1660 des Produzenten LOREX Technology
Zur Seite of 75
16 CHANNEL DIGITAL NETWORK SURVEILLANCE SYSTEM Instruction Manual English Version1.0 MODEL: QLR1660 www.lorexcctv.com Copyright © 2007 Lorex Technology In c.
QLR1660 User Manual 2 IMPORT ANT SAFEGUARDS AND W ARNINGS W ARNING: T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. NOTE: This equipment has been tested and found to comply with t he limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
DIGIT AL VIDEO RECORDER 3 Import ant Safety Inst ructions 1) Read & Retain Instructions All the safety and operating instructions s hould be read before the appliance is operated. The safety and operating instructions s hould be retained for future reference.
QLR1660 User Manual 4 CONTENTS SECTION 1 - PRODUCT IN FORMA TI ON 1. 2. 3. Video Capture Card S pecifications ….……………………………..…...…………..………………............. . System Requirement …..………………………… …………………………………….
DIGIT AL VIDEO RECORDER 5 SECTION 1 - PRODUCT INFORMA TION 1 . V i d e o C a p t u r e C a r d S p e c i f i c a t i o n s Product Video Card Video Input Recording Rate (NTSC / PAL) Audio Input Sensor.
QLR1660 User Manual 6 2. System Requirement QLR1660 QLR1660-2 OS Windows 98SE / ME / 2000 / XP CPU P-IV 1.6GHz or higher P-IV 3.0GHz or higher Memory more than 256MB HDD 5Gbyte or higher VGA 32MB or h.
DIGIT AL VIDEO RECORDER 7 SECTION 2 - INST ALLA TION INSTRUCTIONS 1. QLR1660 Hard ware Installations [NOTE] Before installing the video capture card, turn off the computer’s power, unplug the po wer cable and d isconnect all other cables attached to the back of the computer.
QLR1660 User Manual 8 1.1.5 W atch- dog Installation for QLR1660 If the system is stopped by abnormal operation, watchdog w ill automatically reboot the computer. The watchdog will restart the computer automatically if it did not re ceiv e any response from the system for more than 5 minutes.
DIGIT AL VIDEO RECORDER 9 1.2 Camera Installation Cameras must be attached to the BNC connectors of the D-sub t ype video input/output cable connected to the video capture cards in a specific order to avoid transmission problems. Cameras need to be installed according to the numerical order marked on the BNC connector.
QLR1660 User Manual 10 2. QLR1660 Driver Inst allations : Applied only to the QLR1660 Server Installation * The screenshots show n below are taken from Windows XP and may vary slightly depending the O.
DIGIT AL VIDEO RECORDER 11 3) The system will then find the video driver in the Software CD. Sel ect the driver for your QLR1660 c ard from the list. Click also Next button here. Video driver for QLR1660, QLR1660-2: "WJ2160 Video Capture Device Ver5.
QLR1660 User Manual 12 5) After the video driver installation finished, click the Finish button. 6) You need to continue installing the audio driver. Select Install the sof tware automaticall y (Recommended) and click the Next button. Audio driver for QLR1660, QLR1660-2: "WJ2160 Audio Capture Device Ver5.
DIGIT AL VIDEO RECORDER 13 8) When the driver is located, the below screen will be shown. Click the Continue Anywa y button to proceed. 9) After the audio driver installation finished, click the Finish button. For QLR1660 you are asked to r epeat the procedures 4 times and for QL R1660-2, 8 times.
QLR1660 User Manual 14 If you have installed QLR1660 , you will find the syst em’s device manager looking like the following figure. 3. QLR1660 Sof t ware Installations (S erver , Client, Search) [NOTE] Y ou will need the product’s serial number to complete the installation of the software.
DIGIT AL VIDEO RECORDER 15 2) In “VIST APRO Version 1.0” dialog, click the Next button. 3) “Select Component” dialog appears. Choose one among 4 o ptions that you want to install. Click Next button. 4) “Customer Information” dialog appears.
QLR1660 User Manual 16 5) “Choose Destination Location” dialog appears. Sele ct folder where Setup will inst all files. Click Next button. [CUA SE] The default installation directory is C:Program Files VIST APRO.
DIGIT AL VIDEO RECORDER 17 6) “Select Program Folder” dialog appears. Choose a progr am folder name for thi s QLR1660 server system and click Next button. 7) “S tart Copying Files” dialog appears. Click the Next button. 8) If installing the files is finished, you choose whether or not register the QLR1660 Server on Startup Menu.
QLR1660 User Manual 18 10) Click also Ye s button here. 1 1) Click also Ye s button he re. 12) Click OK button. Now you have successfully installed the DirectX8.1 for QLR1660 s ystem. [REFERENCE] If DirectX 8.1 software is first inst alled, your computer with Windows 98 or ME will be rest arted.
DIGIT AL VIDEO RECORDER 19 13) Before you use this QLR1660 program, must restart your computer. Choose Yes, I want to restart my computer now and click OK button to finish setup. 14) Af ter a moment, computer restarts and operates the QLR1660 Server system.
QLR1660 User Manual 20 SECTION 3 - HOW TO USE QLR1660 SERVER 1. Main Interface Windo w When entering the Server Program, the main int erface screen will open as shown below . There are several view modes for efficient monitoring such as single channel, division screen (multi c hannel), and auto rotation view modes.
DIGIT AL VIDEO RECORDER 21 ■ Minimize button Click to minimize the screen to the taskbar . ■ System St atus ▶ Date and T ime S t atus Display (Current) ▶ HDD S torage S tatus (% Used) : The Recycle HDD icon ( ) is shown if in overwrite mode. ▶ Client Connection S tatus : Displays the Client connection status.
QLR1660 User Manual 22 ■ Shutdown button Click this button to shutdown the main server application. [NOTE] The default ID and password of administra tor are ‘ admin ’ and ‘ master ’ ■ Relay On buttons If you click ‘RELA Y’ tap, the relay on buttons appear .
DIGIT AL VIDEO RECORDER 23 If you click ‘OK’, the audio setup of the QLR1660 Server pro gram is enabled. - A udio Speaker button: On - A udio recording a nd transferring: audio but tons are enable.
QLR1660 User Manual 24 ▪ 9-division screen (9-channels display) : T wo 9-division screens of A(1~9ch), B(8~16ch) are alternated by clicking *By double-clicking a channel on the screen, One channel screen of the channel and 9-division screen are changed alternately.
DIGIT AL VIDEO RECORDER 25 2. Local Setup Mode This section discusses the system setup mode of QLR1660 Server . In the setup m ode, some dialogs will be displayed for the system configuration including the changing passwords, scheduling recordi ngs, programming motion detection, and so on.
QLR1660 User Manual 26 2-1. System Setup ▶ Camera On/Off : Enable / Disable each camera. (16cameras) ▶ Syst em ▪ Auto switching interval : Setup the interval time for the auto switching. All cameras will be displayed sequentially with this interval time.
DIGIT AL VIDEO RECORDER 27 . ▪ Record drive : Setup the drive used for recording. ▪ PTZ Port number : Select the COM Port that the PTZ camera will be connected to. (Refer to ‘Appendix -1.Pan/Tilt/Zoom Camera Installation’.) ▶ Audio recording and transfer ring - Enable / Disable each audio to be recorded and transferred.
QLR1660 User Manual 28 ▪ Watch-dog : If this is checked, during the system stop by abnormal operation of QLR1660, computer will be rebooted automatically if it did not receive any response from the system for more than 5 minutes. And you can monitor continuously by this function during absence.
DIGIT AL VIDEO RECORDER 29 [NOTE] If you want to be closed to the public for protection of your information (product number , IP address), you must not check and then your information (product number , IP address) is not registered to IP Server . (But, Network connection by Product number is impossible.
QLR1660 User Manual 30 ▪ Filtering : Setup the network filtering. You can appoint IP addr ess that will be denied connection. Also, within the IP address range, you can appoint specific IP addresses to accept. - Denied IP address : Input the IP address that will be denied.
DIGIT AL VIDEO RECORDER 31 2-2. Camera Setup ▶ Camera select : Select a camera to setup. ▶ For each camera ▪ Camera location : Describe the location where the selected camera is installed. This name will be displayed on screen when viewing this camera.
QLR1660 User Manual 32 2-3. Schedule Record Setup ▶ Camera select : Select a camera to setup Recording Schedule. If y ou click ‘All Camera’, the Reco rding Schedule is applied to all cameras ▶ Record mode : Appoint the time by dragging on the timetable and click a record mode.
DIGIT AL VIDEO RECORDER 33 ▶ Setup holiday : On selected holidays no recording will take place unless manually initiated. Y ou can specify the holiday as desired. Select the date and click ‘Add’. T hen, the date lists in the holiday list. T o remove the date, Select the date at the holiday list and click ‘Remove’.
QLR1660 User Manual 34 ▶ For each camera ▪ Region Viewer : On this viewer , you can set the region and tes t. The active region is shown with a red grid. ▪ Sensitivity : Setup the sensitivity of brightness in the motion-detection region. ▪ Min.
DIGIT AL VIDEO RECORDER 35 2-5. Sensor Setup ▶ Sensor select : Select the sensor input to configure. ▶ For each sensor ▪ Sensor Enable : If checked, this sensor is enabled. ▪ Normally Closed : Choose this option if using a Normall y Cl osed sensor rather than Normally Open.
QLR1660 User Manual 36 2-6. Speaker , Relay out Setup ▶ Speaker out ▪ Speaker out Enable : If checked, speaker output is enabled. ▪ W ave file : Setup the wave file for speaker output. (Use ‘Pla y’ to hear the file in advance.) ▪ Working time : Schedule the time frame during which the speaker will be able to activate.
DIGIT AL VIDEO RECORDER 37 2-7. Mail Setup Captured images can be sent to specified reci pients via e-mail when event upon alarm conditions. ▶ Mail Information ▪ Mail Enable : Check to enable the e-mail function. ▪ Sender information : Enter the name, mail address, and SMTP Server of sender .
QLR1660 User Manual 38 ▪ Working time : Schedule the time frame during while the e-mail function will be able to activate. ▪ Minimum interval betw een two consecutive mails : Sets the minimum interval between two consecutive e-mails.
DIGIT AL VIDEO RECORDER 39 2-8. User registration Setup ▶ User List : Displays users registered to use this system. Y ou can add, modify, or delete user using this menu. The registered ID/password is used when accessing the system remotely from the Client or Search program.
QLR1660 User Manual 40 < Password Authority Le vels > ▶ Administrator p assword : Changes the administrator password by clicking ‘Change’. ▶ Confi rm p assw ord : Check to confirm password bef ore you execute the following – Setup, Search, S top Schedule Record, Shut-down.
DIGIT AL VIDEO RECORDER 41 SECTION 4 - HOW TO USE QLR1660 SEARCH The Search Mode is divided into two m odes - Local Search and Remote Search. The Local Search mode retrieves video stored locally on the machine running the Server pr ogram.
QLR1660 User Manual 42 ■ Minimize button Click to minimize the screen to the taskbar . ■ Search Path Viewer Displays the present path on searching. (Search mode: Directory or Serv er ID) ■ Calendar / Zoom ▶ Calendar Use the calendar to find dates that has a recorded data.
DIGIT AL VIDEO RECORDER 43 ■ Playback buttons Fast Backward Play (x5) Backward Play Stop Play Fast Forward Pl ay (x5) Go to First frame Backward one frame Jump (Shifts to specific time) Forward one .
QLR1660 User Manual 44 ■ Channel Select b u t t o n s Individual channels may be display ed full screen via these buttons *On playing, you c an’t change the channel. *In case of displaying by screen division mode, plays pursuant to the recording data of selected channel.
DIGIT AL VIDEO RECORDER 45 ■ Store to AVI button Use this button to save the recording as an A VI video clip. ■ Panorama button Using this button, video will be able to be played back image-by-image. ■ Capture button Use the Capture button to save or print individual images.
QLR1660 User Manual 46 2. Local Search Mode * During local search, the Local Search button ( ) is disabled . (1) Selecting Director y for local searching Click the ‘Setup’ button ( ). The follow ing window will open: In the Directory section, select the drive and directory for local searching.
DIGIT AL VIDEO RECORDER 47 (3) Selecting the recordi ng data for playback on timetable The recorded information of the selected date is shown on a timetable. You can see the recorded information by channel, time and event. Select a channel for playback and click the point of time on recording bar.
QLR1660 User Manual 48 Pause ▶ t o o l : Backward one frame Go to First frame Forward one fram e Go to Last fram e Jump * Play images frame by frame using Pause tool * Use the Jump button to go to a specific time. : Click the ‘Jump’ button, specify time to search, and click ‘OK’ .
DIGIT AL VIDEO RECORDER 49 c) Click ‘ok’ button to save the changes and close the setup panel. d) Click smart search button to enable the smart search function. ( ) *If the selected channel has not the recording data for smart search, smart search button is disabled and not clicked.
QLR1660 User Manual 50 ▶ Store to AVI Here, a file can be converted to an AVI file , which will be able to be played back on any PC. ▪ Af ter clicking the ‘S tore to A VI’ button, select the compression type and click ‘S ta rt’. Then, the conversion to A VI file will be progress ed until you click ‘Done’ or the file is end.
DIGIT AL VIDEO RECORDER 51 ▶ Capture Images are able to be saved or printed using this function. The following optio ns are available in regards to the captured image : Zoom : Y ou can e nlarge or shrink the current capture image using Zoom In/Out buttons.
QLR1660 User Manual 52 3. Remote Search Mode * If connected, in the Remote Search, Remote Search ( ), Setup ( ), Bookmark ( ), Panorama ( ), S tore to A V I ( ), Smart Sea rch ( ) buttons are disabled and Local Search & Download buttons are enabled .
DIGIT AL VIDEO RECORDER 53 (3) Selecting date to search In calendar , select the date you want to search by clicking the day in the window . ▶ Calendar The Calendar shows dates that have recorded data. ▪ Blue date: Has recorded data. ▪ Green date: Currentl y selected date.
QLR1660 User Manual 54 ▶ Select by Event : Use to see the recorded data b y event. ▪ A = Display all ty pes of recording. ▪ C = Display only Continuous Recording data. (Green) ▪ M = Display only Motion Detection Recording data. (Red) ▪ S = Display only Sensor Recording data.
DIGIT AL VIDEO RECORDER 55 ▶ Download Use this button to download selected video from the remote server to the client PC. If you click, the ‘Setup download’ window appears. T ime has a recorded data is specified by red block. Select the time to download by clicki ng the desired block and then click ‘Download’.
QLR1660 User Manual 56 ▶ Panorama: In the Remote Sea rch, ‘Panorama’ button is disabled . ▶ Capture Images are able to be saved or pr inted using this function. The following optio ns are available in regards to the captured image : Zoom : Y ou can e nlarge or shrink the current capture image using Zoom In/Out buttons.
DIGIT AL VIDEO RECORDER 57 SECTION 5 - HOW TO USE QLR1660 CLIENT The Client software allows for remote surveillanc e of the DVR via LAN, Internet, or Dial-up. 1. Main Interface Windo w Launch the QLR1660 Client program b y doubl e-clicking the QLR1660 Client icon ( ) on the desktop.
QLR1660 User Manual 58 ■ Setup butt on Click here to enter the Setup Mode. [NOTE] The default password for user of Client is ‘1111’. ■ Search button Click here to enter the Search mode. Y ou can search recordings by camera number, date, time and event.
DIGIT AL VIDEO RECORDER 59 ■ Channel Select b u t t o n s ▶ Group buttons (A,B) : By clicking each group button (A,B), displa ys 8 channel select buttons belongs to each group ▶ Channel Select b.
QLR1660 User Manual 60 ■ Call button Use when try to do audio communication wi th the QLR16 60 Server connected. Click this button to call the server for an audi o session.
DIGIT AL VIDEO RECORDER 61 2. Remote View Mode 2-1. Local Setup M ode The Local Setup Mode allows configurat ion changes to be made to the remote PC running the Client softw are. These settings only affect the PC running the client soft ware and do not affect the server in any way .
QLR1660 User Manual 62 (1) System Setup ▶ Camera On/Off : Enable / Disable each camera. (16 cameras) ▶ Syst em ▪ Auto switching interval : Setup the interval time for the auto switching. All cameras will be displayed sequentially with this interval time.
DIGIT AL VIDEO RECORDER 63 ▶ Audio recording and transpo rt - Enable / Disable audio to be recorded and transferred. : If enabled, you can record the audio signal transmitt ed from the QLR1660 Server .
QLR1660 User Manual 64 4. Check ‘Select’ of ‘Microphone’ secti on in the ‘Recording Control’ window show n. And, click ‘Advanced’ and check ‘2. Microphone Boost’ of ‘Other Controls’ section in the ‘Advanced Controls for Microphone’.
DIGIT AL VIDEO RECORDER 65 (2) Camera Setup ▶ Camera Select : Select a camera to setup. ▶ For each camera ▪ Prerecording duration : Enter the pre- recording duration (time) of the camera when event occurs at selected camera.
QLR1660 User Manual 66 (3) Schedule Record Setup ▶ Camera select : Select a camera to setup Recording Schedule. If y ou click ‘All Camera’, the Reco rding Schedule is applied to all cameras. ▶ Record mode : Appoint the time by dragging on the timetable and click a record mode.
DIGIT AL VIDEO RECORDER 67 ▶ Setup holiday : On selected holidays no recording will take place unless manually initiated. Y ou can specify the holiday as desired. Select the date and click ‘Add ’. Then, the date lists in the holiday list. T o remove the date, Select the date at the holida y list and click ‘Remove’.
QLR1660 User Manual 68 (4) Server Registration Setup Register the network information and User ID/Passw ord of QLR16 60 Server you want to connect to. If you click ‘Add’, the ‘Server Registration’ window appears as follow. ▪ Server Information : Enter t he information of QLR1660 Server you want to connect to.
DIGIT AL VIDEO RECORDER 69 [NOTE 1] 1. In case of the QLR1660 Server Network is set with Static IP address , you should enter ‘ Static IP address ’ of QLR1660 Server to connect in ‘ IP/Product No’ section.
QLR1660 User Manual 70 2-2. Connecting to th e QLR1660 Server ▶ Clicking the ‘Connect’ button ( ) on the main screen of the Client app lication opens the ‘Remote connection’ window below. ▪ Server Information: Select the server to connect to.
DIGIT AL VIDEO RECORDER 71 3. Remote Setup Mode * This setup mode is avail able only to the administrator. Y ou can setup remotely the system configuration of QLR1660 Serv er system using Remote Setup mode of Client program. ▪ After clicking the ‘Setup’ button ( ), click the ‘Remote’ option.
QLR1660 User Manual 72 APPENDIX 1. Pan/Tilt/Zoom Camera Inst allation If you want to use P/T/Z camera with QLR1 660, you need to connect with ‘RS-232C to RS -485 Converter ’ .
DIGIT AL VIDEO RECORDER 73 2. External Sensor and Relay Inst allation (1) Selection of sensor t ype Choose Anode type (When it works, 0 ohm is remained) as a sensor and NO type (Normal Open t ype.
QLR1660 User Manual 74 3. T rouble shooting 1. What is the produc t number? The product number is provided with QLR1660 main pr oduct. Please check this num ber in the license document provided with the item. Especially , it is necessa ry to connect to server of QL R1660 by networking.
It’s all on the web Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades Lorex Technology I nc.
Ein wichtiger Punkt beim Kauf des Geräts LOREX Technology QLR1660 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie LOREX Technology QLR1660 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für LOREX Technology QLR1660 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von LOREX Technology QLR1660 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über LOREX Technology QLR1660 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon LOREX Technology QLR1660 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von LOREX Technology QLR1660 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit LOREX Technology QLR1660. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei LOREX Technology QLR1660 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
