Benutzeranleitung / Produktwartung NuLOOQ des Produzenten Logitech
Zur Seite of 88
Welcome to Logitech NuLOOQ navigator Congratulations on acquiring your new Logitech NuLOOQ navigator control device. This innovative new device is truly your mouse's best friend. Off load navigation and many other actions from the mouse onto the NuLOOQ navigator.
Configuring Adobe Photoshop CS2 for 1st Time Use Before NuLOOQ navigator can be used with Adobe Photoshop CS2, you must first configure Adobe Photoshop CS2 and then restart CS2 for proper operation. To get started, first ensure that the NuLOOQ navigator driver has been installed on your system and your system has been restarted, if required.
A dialog box appears with options on configuring shortcut keys for virtually any command in Photoshop. Click on "File" menu command. This will expand all the "File" menu commands. Scroll down the list till you fine "NuLOOQ Plug-in.
Click on OK once complete and then exit out of Photoshop. You may now start Photoshop and start using NuLOOQ navigator. No other configuration changes are required from within the NuLOOQ navigator panel. If you change your workspace or load a different workspace, you may need to reconfigure the shortcut key for NuLOOQ Plug-in.
Getting Started Logitech NuLOOQ navigator is a powerful device with a great deal of functionality and flexibility. Click on links below to quickly get to a different section.
● click triggerpoints: The 4 triggerpoints within the tooltuner dial groove. Triggerpoints labeled I, III and the circle and square buttons are click triggerpoints. ● touch triggerpoint: The single button located in the center labeled triggerpoint II.
limits your access to the tooltuner dial and the built-in triggerpoints. Back to top > Using the navring The navring is a gentle moveable gray ring encircling the device. This ring can be moved in all horizontal directions and twisted, as shown in animated image below.
In most applications, the navring is used to pan and zoom around documents and images. However in timeline based apps, such as video editing or audio applications, the navring can be configured to navigate the timeline, such as moving forward or backwards or adjusting resolution.
Using the triggerpoints The surface of the tooltuner dial also contains five triggerpoints; 4 triggerpoints require a click to activate, while one is touch sensitive. All 5 triggerpoints are fully programmable and configurable. Triggerpoint II is touch sensitive and doesn't require a click to activate.
Back to top > © 2006 Logitech. All rights reserved. Logitech, the Logitech logo and other Logitech marks are owned by Logitech and may be registered.
Installing / Uninstalling Logitech NuLOOQ navigator In the Package The package containing NuLOOQ navigator contains the control device, an installation CD and other marketing collateral. The CD contained in the package is the latest version of software available at that time.
The first screen above asks you to confirm the license agreement. Check next to "Yes" if you agree with the agreement and then click on "Next>" to proceed to next screen.
The second screen above allows you to confirm location of driver. We recommend selecting the default location. If you desire the driver to be installed at another location, type in the new location in the text box or select browse to bring up the "Select Folder" window to select the folder.
The last screen confirms your installation configuration. Once you click on "Next>" the installation for NuLOOQ navigator will begin..
The installation will take between 10-30 seconds depending on your processor speed. Once complete you'll be ready to use NuLOOQ navigator. No reboot is required after installation of Logitech driver.
The above screen offers two options, one to uninstall and the other to repair. Select Uninstall and then "Next>" to continue the uninstall process.
. The above confirmation screen asks you to reconfirm uninstall of NuLOOQ navigator. Note when you uninstall NuLOOQ navigator, only driver and plug-in files will be deleted. All user configuration files will NOT be deleted from your system. After you click on "Next>", the uninstall process will start and be completed in a few seconds.
Select Repair NuLOOQ navigator from screen above to start repair process. And then click on "Next>" to continue to next screen..
The repair process will reinstall drivers and plug-ins. Note any configuration files will not be removed in the process. Click "Next>" to start process. The repair process will take about 10-30 seconds and NuLOOQ navigator will be fully functional upon completion of the process.
Using NuLOOQ navigator with Adobe Photoshop CS2 Let's get started using NuLOOQ navigator in Adobe Photoshop CS2. Click on any link to quickly get to see how you can use the navring, tooltuner and triggerpoints in Adobe Photoshop CS2.
Pan and Zoom Navigation in Adobe Photoshop CS2 using navring The gray ring encircling the device, called the navring is used to smoothly navigate around your current Photoshop image. Gently nudge the ring in all directions to navigate the image. Note, the device stays stationary.
Gently move the navring to the left to scroll the image to the right till the end is reached. If the window size is at or larger than the image size, than you may not be able to scroll to the right. Resize window or adjust zoom value to scroll to the right.
Gently twist the navring clockwise to zoom into the image. Place the cursor anywhere on the image and the image will continue to zoom in towards the cursor. The image will continue to zoom in, in fine increments until you get to 1600%. Note, if you want to modify zoom to zoom in, at set increments, i.
1. Using too much. The navring moves a very small amount and requires just a light force. 2. Tilting instead of sliding. Tilting the navring will result in no or little activity. Slide the navring parallel to the desk to get the best results. © 2006 Logitech.
Changing Pan and Zoom Orientation If while moving the navring, the image movement doesn't feel comfortable or correct, you may want to reorient how the navring interacts with the image. You may want to swap how the navring interacts with the image.
4. Change default setting from zoom in to zoom out. Go back to control and now select Twist Counterclockwise to set that assignment to zoom in. 5. Click on apply to make the changes effective. Now your settings have changed. This change will be effective every time until you change the settings again.
Changing Zoom in and Zoom out Settings to Fixed Resolutions (33%, 50%, etc.) By default, zooming in and zooming out using NuLOOQ navigator is set to provide you with the smoothest experience. This will result in zooming in and out at zoom resolutions that provide the smoothest feel.
4. Under Assignment, select Type Keystroke. Click here to learn more about Assignment types . 5. Click in the keystroke field and press and hold CTRL key, followed by "=" key. This will display an "=" sign in keystroke and "Control" check box to the right will be checked.
6. Under Mode, select the ideal rate. We recommend using 20 times per second, but experiment to see which setting works best for you. 7. Click on Apply to make changes effective immediately. © 2006 Logitech. All rights reserved. Logitech, the Logitech logo and other Logitech marks are owned by Logitech and may be registered.
NuLOOQ navigator Global Settings ("All applications") The "All Applications" configuration in NuLOOQ navigator is a unique configuration setting that applies to all unconfigured applications.
Navring – Push Up Sends mouse wheel up commands; would typically move the scroll bar up in many apps. Navring – Push Down Sends mouse wheel down commands; would typically move the scroll bar down in many apps.
Navring – Twist Counterclockwise Not Assigned Tooltuner – Tune Clockwise Increase Volume Tooltuner – Tune Counterclockwise Decrease Volume Triggerpoint I Not Assigned Triggerpoint II Not Assigne.
Triggerpoint III Not Assigned Triggerpoint [] Not Assigned Triggerpoint O Not Assigned © 2006 Logitech. All rights reserved. Logitech, the Logitech logo and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners.
Adjusting Brush Size and other Options in Adobe Photoshop CS2 using tooltuner dial The circular disk (tooltuner dial or tooltuner) located at the top of NuLOOQ navigator is used to make fine adjustments to brush size and other option values in increments of 1 pixel in any brush based tool within Adobe Photoshop CS2.
Gently gliding your finger clockwise on the tooltuner dial will increase the current option value in increments of one. The faster you glide you finger on the tooltuner dial, the faster the value will change. For example, if you are adjusting the brush size, place your brush directly on the object for proper sizing.
1. Once you are in the mode to adjust value, you don't need to exit the value mode. If you switch tools, your NuLOOQ device will automatically make the right option values available to you. If you change focus to another application, the dialog box will disappear and then reappear when you come back to Photoshop.
Quick Shortcut and Command Execution in Adobe Photoshop CS2 using triggerpoints Any of the 5 triggerpoints on the NuLOOQ navigator device can be configured to execute a shortcut command or even modifier keys.
Triggerpoint III is set to Step Forward (SHIFT +CTRL+Z). Triggerpoint "Square" at 12 o'clock position is set to enable static value adjustment mode to make adjustments to brush size. Triggerpoint "Circle" at 6 o'clock position is set to CTRL key.
frequency use commands or keys. Things to Avoid 1. Pressing down on triggerpoint II. This is a very common error. Triggerpoint II is unique and only requires you to just rest your finger on the button. If you push down on triggerpoint II, then you could press multiple triggerpoints, possibly generating an unexpected result.
Configuring triggerpoints The triggerpoints can be configured to execute virtually any keyboard shortcut command or modifier key. Note, as of this time, only a single keystroke or modifier key(s) + keystroke can be executed. To configure any of the triggerpoints, just follow these steps: NuLOOQ navigator Control Panel Description 1.
4. Select assignment of choice. Click here to learn more about all assignment options. For this demonstration, we'll select "Type Keystroke". 5. Type in any shortcut key desired. 6. Click on apply for changes to be effective. © 2006 Logitech.
Pan and Zoom Navigation in Adobe Photoshop Elements 4 using navring The gray ring encircling the device, called the navring is used to smoothly navigate around your current Photoshop image. Gently nudge the ring in all directions to navigate the image.
you can reconfigure NuLOOQ navigator. Gently move the navring to the left to scroll the image to the right till the end is reached. If the window size is at or larger than the image size, than you may not be able to scroll to the right. Resize window or adjust zoom value to scroll to the right.
Gently twist the navring clockwise to zoom into the image. Place the cursor anywhere on the image and the image will continue to zoom in towards the cursor. The image will continue to zoom in, in fine increments until you get to 1600%. Note, if you want to modify zoom to zoom in, at set increments, i.
1. Using too much force. The navring moves a very small amount and requires just a light force. 2. Tilting instead of sliding. Tilting the navring will result in no or little activity. Slide the navring parallel to the desk to get the best results. © 2006 Logitech.
Other Applications NuLOOQ navigator can be easily configured for use in many other applications. This section shows how NuLOOQ navigator has been configured in some non-Adobe CS2 applications.
Using NuLOOQ navigator in Adobe Flash Professional NuLOOQ navigator Action Application Reaction Navring – Push Up Scroll to the top of the Stage Navring – Push Down Scroll to the bottom of the Sta.
Navring – Twist Clockwise Zoom into the Stage Navring – Twist Counterclockwise Zoom out of the Stage Tooltuner – Tune Clockwise Scrub timeline forward Tooltuner – Tune Counterclockwise Scrub t.
Triggerpoint II Not Assigned Triggerpoint III Display Actions Panel Triggerpoint [] Lasso Tool Triggerpoint O Not Assigned © 2006 Logitech. All rights reserved. Logitech, the Logitech logo and other Logitech marks are owned by Logitech and may be registered.
Using NuLOOQ navigator in Adobe After Effects 7.0 Professional Unlike other document, spreadsheet or image based apps, in which NuLOOQ navigator is used to move around images, Adobe After Effects is an example of how NuLOOQ navigator can be configured to navigate timelines, rather than images.
NuLOOQ navigator Action Application Reaction Navring – Push Up Frame to Full Screen on currently selected tab Navring – Push Down Save Navring – Push Right Next Keyframe Navring – Push Left Pr.
Navring – Twist Counterclockwise Zoom out timeline Tooltuner – Tune Clockwise Scrub timeline forward Tooltuner – Tune Counterclockwise Scrub timeline reverse Triggerpoint I Control Triggerpoint .
Triggerpoint III Alt Triggerpoint [] RAM Preview Triggerpoint O Pre-Compose © 2006 Logitech. All rights reserved. Logitech, the Logitech logo and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners.
Using NuLOOQ navigator with Adobe Illustrator CS2 NuLOOQ navigator Action Application Reaction Navring – Push Up Scroll Up Navring – Push Down Scroll Down Navring – Push Right Scroll Right Navri.
Navring – Twist Clockwise Zoom In Navring – Twist Counterclockwise Zoom Out Tooltuner – Tune Clockwise Use Global Settings Tooltuner – Tune Counterclockwise Use Global Settings Triggerpoint I .
Triggerpoint II Not Assigned Triggerpoint III Not Assigned Triggerpoint [] Not Assigned Triggerpoint O Not Assigned © 2006 Logitech. All rights reserved. Logitech, the Logitech logo and other Logitech marks are owned by Logitech and may be registered.
Using NuLOOQ navigator in Adobe Premiere Pro NuLOOQ navigator Action Application Reaction Navring – Push Up Go to next edit point Navring – Push Down Go to previous edit point Navring – Push Rig.
Navring – Twist Clockwise Zoom into timeline Navring – Twist Counterclockwise Zoom out of timeline Tooltuner – Tune Clockwise Scrub frame forward Tooltuner – Tune Counterclockwise Scrub frame .
Triggerpoint II Play / Stop Triggerpoint III Track Select Tool Triggerpoint [] Not Assigned Triggerpoint O Not Assigned © 2006 Logitech. All rights reserved. Logitech, the Logitech logo and other Logitech marks are owned by Logitech and may be registered.
Using NuLOOQ navigator in Microsoft Word NuLOOQ navigator Action Application Reaction Navring – Push Up Move scroll bar up; document scrolls down Navring – Push Down Move scroll bar down; document.
Navring – Twist Clockwise Zoom into the document Navring – Twist Counterclockwise Zoom out of the document Tooltuner – Tune Clockwise Increase font size Tooltuner – Tune Counterclockwise Decre.
Triggerpoint II Use Global Settings Triggerpoint III Use Global Settings Triggerpoint [] Not Assigned Triggerpoint O Not Assigned © 2006 Logitech. All rights reserved. Logitech, the Logitech logo and other Logitech marks are owned by Logitech and may be registered.
Using NuLOOQ navigator in Microsoft Excel NuLOOQ navigator Action Application Reaction Navring – Push Up Moves scroll bar up; spreadsheet scrolls down Navring – Push Down Moves scroll bar down; sp.
Navring – Twist Clockwise Zoom into the spreadsheet Navring – Twist Counterclockwise Zoom out of the spreadsheet Tooltuner – Tune Clockwise Use Global Settings Tooltuner – Tune Counterclockwis.
Triggerpoint II Use Global Settings Triggerpoint III Use Global Settings Triggerpoint [] Not Assigned Triggerpoint O Not Assigned © 2006 Logitech. All rights reserved. Logitech, the Logitech logo and other Logitech marks are owned by Logitech and may be registered.
Using NuLOOQ navigator in Firefox NuLOOQ navigator Action Application Reaction Navring – Push Up Scroll up Navring – Push Down Scroll down Navring – Push Right Go to next page (if one exists) Na.
Navring – Twist Clockwise Go to next tab (if multiple tabs exist) Navring – Twist Counterclockwise Go to previous tab (if multiple tabs exist) Tooltuner – Tune Clockwise Use Global Settings Tool.
Triggerpoint II Use Global Settings Triggerpoint III Use Global Settings Triggerpoint [] Not Assigned Triggerpoint O Not Assigned © 2006 Logitech. All rights reserved. Logitech, the Logitech logo and other Logitech marks are owned by Logitech and may be registered.
Using NuLOOQ navigator in Google Earth NuLOOQ navigator navigation in Google Earth is dependent on where your mouse is located and where your input focus is set within Google Earth window. The image below is a sample of a Google Earth window. To navigate around the world in Google Earth, ensure that your input focus is set on the graphical image.
Navring – Push Up Moves the view up Navring – Push Down Moves the view down Navring – Push Right Moves the view to the right Navring – Push Left Moves the view to the left Navring – Twist Cl.
Navring – Twist Counterclockwise Rotates the view clockwise Tooltuner – Tune Clockwise Fine zoom into view Tooltuner – Tune Counterclockwise Fine zoom into view Triggerpoint I Quick Zoom out of .
Triggerpoint III Quick Zoom into view Triggerpoint [] Tilt up Triggerpoint O Tilt down © 2006 Logitech. All rights reserved. Logitech, the Logitech logo and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners.
Building Application Configurations Creating new application configurations is an easy process. Virtually any application located and installed on the system can be configured for use with NuLOOQ navigator.
Step 3: Set an assignment to the control. The assignment menu for all controls are identical. Assignment Definition Unassigned No action will take place when that control surface is moved. Use Global Settings Use settings associated with "All Application" for that control surface movement.
Type Special Key System commands, such as Mute, volume up, browser forward, back, etc. can be mapped. Mouse Wheel Up Send mouse wheel up commands when NuLOOQ navigator control surface is moved. Mouse Wheel Down Send mouse wheel down commands when NuLOOQ navigator control surface is moved.
Mode Setting Definition Press and Hold Equivalent to pressing keyboard key and holding. The exact rate is set by the system. Press and Release A single event or keystroke is sent and then stopped. So even if navring is used, only one event is sent even if the navring is continuously moved.
NuLOOQ navigator Application Configuration Chart Application Name: Platform: Application Version #: NuLOOQ navigator Action Application Reaction Shortcut or Scroll Wheel Navring – Push Up Navring .
Navring – Twist Clockwise Navring – Twist Counterclockwise Tooltuner – Tune Clockwise Tooltuner – Tune Counterclockwise Triggerpoint I.
Triggerpoint II Triggerpoint III Triggerpoint [] Triggerpoint O © 2006 Logitech. All rights reserved. Logitech, the Logitech logo and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners.
Configuring NuLOOQ navigator for Internet Explorer The filled out chart below shows how we may want to configure NuLOOQ navigator to interact with Internet Explorer.
Navring – Twist Counterclockwise Decrease font size CONTRL+Mouse wheel up Tooltuner – Tune Clockwise Use Global Settings Use Global Settings Tooltuner – Tune Counterclockwise Use Global Settings.
Triggerpoint III Not configured Triggerpoint [] Not configured Triggerpoint O Not configured Using the desired configuration above, the following steps outline how you may configure NuLOOQ navigator to control Internet Explorer. NuLOOQ navigator Control Panel Description 1.
2. Find the application you'd like to add. Note, we recommend finding the .exe file to add, rather than a link to the executable. For this demo, we'll be selecting Internet Explorer. 3. Internet Explorer will now appear next to Configure. Ensure your app appears in this box for proper configuration.
5. Now under Assignment, select "Mouse Wheel Up". 6. The Auto repeat pull-down will appear. The auto-repeat pull- down will let you control how fast you'd like to send the mouse wheel up event or even a keystroke event. This will allow you to configure the rate that best meets your requirements.
7. Now we'll set the twist clockwise and twist counterclockwise control to increase and decrease font size in Internet Explorer. Select "Twist clockwise" from Control. 8. CTRL+MOUSE WHEEL DOWN increases font size in Internet Explorer. This assignment needs to be set for twist clockwise.
9. For tooltuner we want to use our "All Applications" settings. To use All Applications, just set assignment to "Use Global Settings" Note, "All Applications" configuration is a special configuration that is setup for all applications for which a configuration doesn't exist.
© 2006 Logitech. All rights reserved. Logitech, the Logitech logo and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners.
NuLOOQ navigator Support Contact Us You may obtain support for your NuLOOQ navigator in one of the following ways: ● Within US: Call 702-269-3457 Mon-Fri, 6am - 6pm PT or visit http://www.logitech.com ● Outside US: Visit the website for your country's contact information.
Ein wichtiger Punkt beim Kauf des Geräts Logitech NuLOOQ (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Logitech NuLOOQ noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Logitech NuLOOQ - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Logitech NuLOOQ reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Logitech NuLOOQ erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Logitech NuLOOQ besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Logitech NuLOOQ verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Logitech NuLOOQ. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Logitech NuLOOQ gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
