Benutzeranleitung / Produktwartung TC71 des Produzenten LG Electronics
Zur Seite of 48
OWNER ’S MANU AL T C SERIES HYDRAULIC COMP A CTORS Revision : 05/2004 Manual # : 150-1010 BREAKER TECHNOLOG Y For Models : T C51, TC71, T C80, TC91, T C151 & T C301.
.
3 Compactor Owner ’s Manual General ................................................. TC51 S pecifications .............................. TC71 S pecifications .............................. TC80 S pecifications .............................. TC91S S pecifications .
4 www .rockbreak er .com BTI compactors are designed to mount on mini-excavators, backhoes and excavators. BTI compactors combine impulse force, down pressure, and vibration to work as soil compactors or pile/sheet drivers.
5 Compactor Owner ’s Manual T C51 SPECIFICA TIONS Impulse F orce: 2,250 - 3,000 lb 2,250 - 3,000 lb 1,020 - 1,360 kg 1,020 - 1,360 kg Oil Flow R eq'd: 8 - 12 US gpm 12 - 18 USgpm 30 - 45 l/min 44 - 68 l/min Cyc les/Minute: 1,940 - 2,200 1,940 - 2,200 Hydraulic Connections: #8 JIC Male #8 JIC Male Minimum T ube I.
6 www .rockbreak er .com T C71S SPECIFICA TIONS Impulse F orce: 3,300 - 5,000 lb 3,300 - 5,000 lb 1,497 - 2,268 kg 1,497 - 2,268 kg Oil Flow R eq'd: 13 - 17 US gpm 13 - 22 USgpm 49 - 63 l/min 50 - 83 l/min Cyc les/Minute: 2,020 - 2,500 2,020 - 2,500 Hydraulic Connections: #12 JIC Male #12 JIC Male Minimum T ube I.
7 Compactor Owner ’s Manual T C80 SPECIFICA TIONS Impulse F orce: 5,000 - 8,200 lb 2,270 - 3,727 kg Oil Flow R eq'd: 20 - 26 US gpm 75 - 97 l/min Cyc les/Minute: 1,659 - 2,200 Hydraulic Connections: #12 JIC Male Minimum T ube I.
8 www .rockbreak er .com T C91S SPECIFICA TIONS Impulse F orce: 5,000 - 8,200 lb 2,270 - 3,727 kg Oil Flow R eq'd: 20 - 26 US gpm 75 - 97 l/min Cyc les/Minute: 1,659 - 2,200 Hydraulic Connections: #12 JIC Male Minimum T ube I.
9 Compactor Owner ’s Manual Impulse F orce: 1 1,120 - 16,610 lb 1 1,120 - 16,610 lb 5,055 - 7,550 kg 5,055 - 7,550 kg Oil Flow R eq'd: 25 - 31 US gpm 35 - 43 US gpm 95 - 1 17 l/min 132 - 163 l/min Cyc les/Minute: 1,800 - 2,200 1,800 - 2,200 Hydraulic Connections: #16 JIC Male #16 JIC Male Minimum T ube I.
10 www .rockbreak er .com Impulse F orce: 16,300 - 24,300 lb 16,300 - 24,300 lb 7,409 - 1 1,000 kg 7,409 - 1 1,000 kg Oil Flow R eq'd: 35 - 43 US gpm 50 - 61 gpm 132 - 163 l/min 189 - 231 l/min Cyc les/Minute: 1,800 - 2,200 1,800 - 2,200 Hydraulic Connections: #16 JIC Male #20 JIC Male Minimum T ube I.
11 Compactor Owner ’s Manual Danger , W arning, and Caution are hazard alerts used in this manual and on the compactor decals to identify hazards on or near the carrier and compactor . Danger - Immediate hazards, which WILL result in severe personal injury or death if the proper precautions are not taken.
12 www .rockbreak er .com HAZARD ALERTS Do not operate the compactor with personnel in the immediate area of the carrier and compactor . Note and avoid all hazards and obstructions such as overhangs, ledges, slide areas, electrical lines, underground cables, water mains, gas lines, etc.
13 Compactor Owner ’s Manual Hydraulic fluids are under high pressure. Fluid escaping under pressure can penetrate the skin causing serious injury . Relieve all pressure before disconnecting hoses.
14 www .rockbreak er .com Head Foot Eye Hearing Protection Protection Protection Protection Do not operate or service the compactor unless you are qualified. A void loose fitting clothing, loose or uncovered long hair , jewelry and loose personal articles.
15 Compactor Owner ’s Manual The compactor must be sized properly for both the carrier on which it will be mounted and the work to be done. Sizing the Compactor based on the Type of W or k Most applications require the soil under a road or load bearing surface to be compacted to 95% or greater than the density of the original material removed.
16 www .rockbreak er .com Always use a compactor sized to the carrier . A compactor that is too small for the carrier will damage the compactor , while a compactor too big will damage the carrier .
17 Compactor Owner ’s Manual T o run, a compactor needs hydraulic flow in one direction within a work- ing pressure range. When installing the compactor the carrier hydraulic circuit must have the f.
18 www .rockbreak er .com Often a carrier is equipped with an auxiliary control valve (see Figure 1), this valve can be adjusted to provide the correct amount of oil flow to the compactor . A pressure relief cartridge can also be installed to protect the hydraulic components.
19 Compactor Owner ’s Manual Car rier without Auxiliar y Circuit If the carrier does not have an auxiliary control valve (see Figure 2), a priority flow control valve must be installed to direct oil flow from the normal circuit to the compactor . The priority flow control valve is usual- ly equipped with a flow adjustment and pressure relief.
20 www .rockbreak er .com There is no separate pressure adjustment on the compactor . The compactor's supply oil should be directed out the left side of the boom and the return line back on the boom's right side. A combination of hoses and steel tubing is recommended to keep the installation neat and cost effective.
21 Compactor Owner ’s Manual Car rier Oil Flow Wo r k in g Pressur e Range Oil Flow & Oil Pressur e SETTING FLO W & PRESSURE For a compactor to operate properly it requires a specific oil flow and sufficient oil pressure.
22 www .rockbreak er .com BTI Ser vice Center s Adjust Car rier’ s Pressur e R elief SETTING FLO W & PRESSURE Now adjust the oil flow on the carrier , so the flow meter reading equals: T C51L/FC.
23 Compactor Owner ’s Manual Carrier oil should be clean and in accordance with the manufacturer's recommendations. After mounting the compactor on the boom and connecting the lines, bleed all air from the hydraulic system. Initially pump grease to the pins in the bracket until it oozes out around the pins.
24 www .rockbreak er .com Hour ly Production Rates Compaction of Materials BTI compactors achieve material compaction by using impulse force and vibration to displace air and water pockets in the material.
25 Compactor Owner ’s Manual Lift Depths Shut off the compactor and lift it into the air to a new position, or using minimum boom down-force slide the compactor along the ground. A void dragging the compactor's plate across the material surface ('ironing') while the motor is running.
When compaction is complete, shut off compactor before lifting it from the ground. Do not pound the ground with the compactor . Do not start in the middle of an un-compacted area. Always start at the edge, near a solid wall, bank, or a previously compacted area.
Disconnect the pressure and return lines. Cap the lines on the machine and on the compactor to prevent dirt from entering. Remove pins to disconnect compactor from boom.
28 www .rockbreaker .com 1. BREAKER TECHNOLOGY Company (hereinafter referred to as BTI) war- rants this product against defects in materials and workmanship for a period of twelve (12) months from the date of installation. This warranty does not cover o-rings, seals, fittings, hoses, or other items considered normal wear items.
29 Compactor Owner ’s Manual BRACKET OPTIONS Bolt-On Rigid T op Mount: (Shown on TC80) S tandard equipment on TC51, TC71, TC80 & TC301 Bolt-On QA Non-Swivel T op Mount: Available as an option on the TC71 & TC80 QA Swivel T op Mount: S tandard equipment on TC91S & TC151S.
30 www .rockbreaker .com T C51 P ARTS T C51 When ordering give Part Number , Part Name, Model and Serial #..
31 Compactor Owner ’s Manual T C51 P ARTS Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Description Upper W eldment Cap Fill/Drain Bearing Housing Lower W eldment Eccentric Assembly Bea.
32 www .rockbreaker .com T C71 P ARTS T C71 When ordering give Part Number , Part Name, Model and Serial #..
33 Compactor Owner ’s Manual T C71 P ARTS Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Description Upper Body Isolator Bearing Housing Bolt - Grade 8 Locknut Flat W asher L.
34 www .rockbreaker .com T C80 P ARTS T C80 When ordering give Part Number , Part Name, Model and Serial #..
35 Compactor Owner ’s Manual T C80 P ARTS Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Description T op Mount T op Frame W eldment Isolator Bolt W asher Locknut Hose Assembly Fit.
36 www .rockbreaker .com T C91S P ARTS When ordering give Part Number , Part Name, Model and Serial #. T C91S.
T C91S P ARTS Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 20 25 26 27 28 29 33 34 35 36 37 38 40 44 45 46 47 48 49 50 52 54 Description Bolt Grease Fitting 1/8” NPT Flatwasher Cap Flange T op .
38 www .rockbreaker .com T C151S P ARTS When ordering give Part Number , Part Name, Model and Serial #. T C151S.
39 Compactor Owner ’s Manual T C151S P ARTS Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 18 20 21 22 23 24 25 26 27 28 29 31 32 33 34 36 38 42 43 44 45 46 47 50 51 54 Description Bolt Grease Fitting .
40 www .rockbreaker .com T C151SH T C151SH P ARTS.
41 Compactor Owner ’s Manual T C151SH P ARTS Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 18 20 21 22 23 24 25 26 27 28 29 31 32 33 34 36 38 42 43 44 45 46 47 50 51 54 Description Bolt Grease Fitting.
42 www .rockbreaker .com T C301 P ARTS When ordering give Part Number , Part Name, Model and Serial #. T C301.
43 Compactor Owner ’s Manual T C301 P ARTS Item 1 2 3 4 5 6 7 8 9 10 11 12 13 17 19 22 24 25 26 29 31 33 34 35 Description T op W eldment Fitting Fitting Nordlock W asher Set M20 Bolt 3/4” -10UNC x 2 1/2” GR.
44 www .rockbreaker .com T C301H T C301H P ARTS.
45 Compactor Owner ’s Manual T C301H P ARTS Item 1 2 3 4 5 6 7 8 9 10 11 12 13 17 19 22 24 25 26 29 31 33 34 35 Description T op W eldment Fitting Fitting Nordlock W asher Set M20 Bolt 3/4” -10UNC x 2 1/2” GR.
.
.
SOLON F ACILITY RIVERSIDE F ACILITY THORNBURY F ACILITY 30625 Solon Industrial Drive, 3464 DURAHART ST . 35 ELGIN ST ., SOLON OHIO, RIVERSIDE,CALIF . THORNBURY ,ONT . 44139 U.S.A. 92507 U.S.A. N0H 2P0 CANADA PH. 440-542-3720 PH. 909-369-0878 PH. 519-599-2015 F AX.
Ein wichtiger Punkt beim Kauf des Geräts LG Electronics TC71 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie LG Electronics TC71 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für LG Electronics TC71 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von LG Electronics TC71 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über LG Electronics TC71 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon LG Electronics TC71 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von LG Electronics TC71 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit LG Electronics TC71. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei LG Electronics TC71 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
