Benutzeranleitung / Produktwartung L15V26D des Produzenten LG Electronics
Zur Seite of 52
© Copyright 2004, LG Electronics USA, Inc. Installation, Setup & Operating Guide I W arranty Model Number | L15V26D | LCD-TV / Monitor.
2 RECORD YOUR MODEL NUMBER (For future reference) The model and serial number of your TV are located on the back of the TV cabinet. For convenience, we suggest that you record those numbers here: MODEL NO.
IMPOR T ANT SAFETY INSTRUCTIONS 3 Important safeguards for you and your new product Y our product has been manufactured and tested with your safety in mind.
4 IMPOR T ANT SAFETY INSTRUCTIONS 14. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
5 INTRODUCTION INST ALLA TION BASIC FEA TURES CLOCK/ TIMERS VIDEO / AUDIO SPECIAL FEA TURES MISC. 5 1 Safety W arnings 2 Important Safety Instructions 3 Controls 6 Remote Control: Installing Batteries.
Controls 6 Front of the Front of the TV TV ch vo l e n te r m e n u tv/v id eo on /off Side Control Panel Side Control Panel TV/Video Button Enter Button Channel Buttons On/Off Button Menu Button V olume Buttons Remote Control Sensor Power/Standby indicator Illuminates red in standby mode, Illuminates green when the TV is turned on.
INTRODUCTION 7 + 75 Ω ANT IN PC INPUT S-VIDEO H/P PC SOUND AC INPUT VIDEO IN R L VIDEO AUDIO (MONO) COMPONENT(480i/480p/720p/1080i) DVD/DTV IN P R P B Y Power Cord Socket - This TV operates on AC power . Never attempt to operate the TV on DC power .
power apc menu mute sleep ch enter vol vol ch cc tv/video 0 23 56 4 89 7 1 mts fcr memory/erase a.prog flashbk dasp Controls 8 POWER NUMBERS APC MENU CHANNEL ( DE ) MTS FCR AUTO PROGRAM Remote Control Buttons Remote Control Buttons ● Press the FLASHBK button to view the last program you were watching.
9 INTRODUCTION TV/VIDEO CLOSED CAPTIONS MUTE ENTER VOLUME ( FG ) SLEEP TIMER P AGE 42 P AGE 40 P AGE 31 P AGE 35 P AGE 26 TV/VIDEO Button TV/VIDEO Button on Remote Control on Remote Control - Each press of this button changes the view- ing source as indicted below .
Remote Control: Installing Batteries/Operation 10 Make sure there are no objects between the remote control and its sen- sor . Don ’ t place the remote control near a heater or in a damp place. A strong impact on remote control may damage it. Signal from the remote con- trol may be disturbed by sun light or other strong light.
TV Overview 11 INTRODUCTION Accessories Accessories Remote control 1.5V 1.5V Power cord Operating guide AAA Batteries power apc menu mute sleep ch enter vol vol ch cc tv/video 0 23 56 4 89 7 1 mts fcr memory/erase a.prog flashbk dasp T ie bands - Arrange the wires with the tie band.
TV Overview 12 - Y ou can adjust the angle of the TV between -3 ° and 15 ° (Range: -3 ° ±3 and 15 ° ±3 º ). Adjusting the Adjusting the TV V TV V iewing iewing Angle Angle -3 ° 15 ° Notes ● If the TV feels cold to the touch, there may be a small “ flicker ” when turned on.
Antenna/Cable Connections 13 INST ALLA TION - For optimum picture quality , adjust antenna direction. ● T ypical wall antenna jack used in apartment buildings, connect the antenna cable as shown below . (Use the correct type of antenna cable for the type of wall antenna jack.
Antenna/Cable Connection and Viewing Setup 14 - After subscribing to a local cable TV service and installing a converter , you can watch cable TV programming. - For further cable TV information, contact a local cable service provider . Cable Cable TV Connections TV Connections 1 Connections 2 Viewing Setup a.
VCR Connection and V iewing Setup 15 INST ALLA TION - In Video mode, TV automatically reverts to TV mode if the fcr button or flashbk buttons are pressed.
External Equipment Connections 16 1 Connections ● Connect the audio/video output jacks on the external A/V equipment to the corresponding input jacks on the TV . 2 Viewing Setup Camcorder CDGP VCDP Video Game set CDI tv/video Video ● T urn on the external A/V equipment.
DVD Player Connections 17 INST ALLA TION 1 Connections 2 Viewing Setup Component ● T urn on the DVD player . ● T urn the TV on and use tv/video button to select Component source.
DTV (Set-top Box) Connections 18 1 Connections 2 Viewing Setup L + 75 Ω PC INPUT ANT IN S-VIDEO H/P PC SOUND AC INPUT VIDEO IN R L P B VIDEO (MONO) COMPONENT(480i/480p/720p/1080i) DVD/DTV IN AUDIO Y P R AUDIO YP B P R (L) (R) Component ● T urn on the DTV receiver (Set-top Box).
PC/Computer Connections (using TV as a Monitor) 19 INST ALLA TION 2 Viewing Setup PC ● T urn on the PC/Computer . ● T urn the TV on and use tv/video button to select PC source. On Remote Control 1 Connections ● Set the monitor output resolution on the PC before connecting to the TV .
PC/Computer Connections (using TV as a Monitor) 20 Notes: a. For optimum picture quality , use standard XGA (1024x768) computer output at a 60Hz refresh rate. Using other formats (i.e.: VGA, SVGA, etc) or refresh rates may result in reduced picture quality .
PC Mode Functions Check 21 INST ALLA TION DE Move F G Adjust Menu Brightness 60 H-position 0 V -position 0 Clock 40 Phase 16 Auto configure Reset Contrast 80 1 Use the menu button to display the available menu shown below. ● H-position/V -position Adjusts picture left/right and up/down.
T urning the TV On 22 2 Use the channel ( D , E ) or number buttons to select a channel to view . 3 Adjust V olume level. ● V olume ( G ) button increases the sound level.
TV Mode Menus 23 BASIC FEA TURES 1 Press the menu button repeatedly to display the available menus shown below. 2 Use the channel ( D , E ) buttons to select a menu option.
Menu Language Selection 24 1 Use the menu button to select the menu shown. 4 Press the menu button to save. English Espa ñ ol Fran ç ais Language Language 3 Use the volume ( F , G ) buttons to select the language for the menus to appear in.
Auto Programming: Finding/Erasing Channels 25 BASIC FEA TURES - For Auto program to work, the programming source must be connected to the TV and the TV must be receiving programming signals either over-the-air or from a cable-type service provider. 2 Press the a.
Auto Programming: Finding/Erasing Channels 26 1 - Select Memory (to add the channel) or Erase (to delete the channel from memory). 2 Use the channel ( D , E ) buttons to select a channel you want to add to memory or erase and then use the memory/erase or volume ( F , G ) buttons to select Memory (add) or Erase (delete).
Favorite Channel Memory 27 BASIC FEA TURES - Favorite Channel lets you quickly scan up to five channels of your choice without having to wait for the TV to scan through all the in-between channels. 1 Use the menu button to select the menu shown below .
Clock Setup 28 - If current time setting is wrong, reset the clock. 1 Use the menu button to select the menu shown below . 2 Press the volume ( G ) and then use the channel ( D , E ) buttons to set the cu r rent hour . 4 Press the menu button to save.
Of f T imer Setup 29 CLOCK/ TIMERS DE Move G Next Menu Clock 10 : 45 AM Off timer On timer Auto off Clock - Off T imer operates only if the Clock has been set to the current time. - Off T imer overrides On T imer if they are set to the same time. 1 Use the menu button to select the menu shown below .
On T imer Setup 30 1 Use the menu button to select the menu shown below . 2 Use the channel ( D , E ) buttons to select the On T imer option. 3 Press the volume ( G ) and then use the channel ( D , E ) buttons to set the turn-on hour . 8 Press the menu button to save.
Sleep T imer Setup 31 CLOCK/ TIMERS 1 Use the sleep button to set the sleep timer . ● Each press of sleep or volume ( F , G ) button changes the setting as shown below. ● T o cancel sleep time setting, press the sleep button repeatedly to select Sleep 0.
V ideo/Picture Setup 32 1 Press the apc button on the remote control. 2 Use the apc buttons or volume ( F , G ) button to select your desired picture appearance. 3 Press the enter ( A ) button to save. ● Each press of volume ( F , G ) button selects a different picture appearance.
33 VIDEO / AUDIO 1 Use the menu button to select the menu shown. 2 Use the channel ( D , E ) bu tt on to select a picture option to adjust. 3 Use the volume ( F , G ) button to make appropriate adjustments. 4 Press the menu button to save. - APC is cancelled if you set User options.
Video/Picture Setup 34 Fine Fine T T uning uning Adjustment Adjustment - Fine tune the Picture appearance to your personal preference 1 Use the menu button to select the menu shown below . 2 Use the ch ann el ( D , E ) buttons to select the Manual program option.
Audio/Sound Setup 35 VIDEO / AUDIO -DASP selects the sound appropriate for your program. 3 Press the enter ( A ) button to save. Audio Setup / DASP Audio Setup / DASP 1 Press the dasp button on the remote control. 2 Use the dasp button or volume ( F , G ) button to select the desired setting for the sound.
Audio/Sound Setup 36 Equalizer Equalizer Adjustments Adjustments 1 Use the menu button to select the menu shown. 2 Use the channel ( D , E ) button to select the DASP option, then press the volume ( G ) button.
37 VIDEO / AUDIO 1 Use the menu button to select the menu shown below . 2 Use the channel ( D , E ) button to select the Balance option. 3 Sound Balance Sound Balance Use the volume ( F , G ) button to adjust the balance.
Audio/Sound Setup 38 - A VL maintains an equal volume level automatically even if the channel is changed. 1 Use the menu button to select the menu shown below . 2 Use the channel ( D , E ) buttons to select the A VL option. 3 A A VL VL (Auto V (Auto V olume Leveler) olume Leveler) Use the volume ( F , G ) buttons to select On or Off.
39 VIDEO / AUDIO - Select Mono sound mode if the signal is not clear or in poor signal reception areas. - STEREO and SAP modes are available only if included on the broadcast signal.
Audio/Sound Setup 40 S-VIDEO H/P VI VIDEO (M COMPONENT(480i/480p/720p/1080i) DVD/DTV IN P R P B Y 1 Press the mute button on the remote control. ● T o restore muted sound, press the mute button or volume ( F , G ) buttons. ● When muted sound is restored, current volume level is displayed on the screen.
Closed Captions 41 SPECIAL FEA TURES An old, bad or illegally recorded tape is playing. Strong, random signals from a car or airplane interfere with the TV signal. The signal from the antenna is weak. The program wasn ’ t captioned when it was produced, transmitted, or taped.
Closed Captions 42 T ext services give a wide variety of informa- tion on all kind of subjects (ex. captioned program lists, weather forecasts, stock exchange topics, news for hearing- impaired---) on up to half of the TV screen. But not all stations offer text services, even though they might offer captioning.
43 SPECIAL FEA TURES CC 1 CC 3 CC 2 CC 4 T ext 1 T ext 2 T ext 3 T ext 4 1 Use the menu button to select the menu shown below . 2 Use the channel ( D , E ) buttons to select the Caption/T ext option. 3 Press the volume ( G ). 4 Press the menu button to save.
Parental Control 44 The Parental Control Function (V -Chip) is used to block program viewing based on the ratings sent by the broadcast station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked.
45 SPECIAL FEA TURES 1 Use the menu button to select the menu shown. 2 Use the channel ( D , E ) buttons to select the the Parental ctl option. DE Move G Next Menu Language English Captions Off Captio.
Parental Control 46 4 Use the channel ( D , E ) buttons to select the Set Password option. Then, press the volume ( F , G ) buttons. Enter a four digit password. Enter it again when requested. ● If Parental ctl is active, then enter the pass- word when requested.
Auto Of f 47 SPECIAL FEA TURES - If there is no input signal, the TV switches to standby mode automatically after 10 minutes. 2 Use the channel ( D , E ) buttons to select the the Auto of f option. 3 Use the volume ( F , G ) buttons to select On or Off.
Key Lock 48 DE Move F G Adjust Menu Captions Off Caption/T ext CC 1 Key lock Off Parental ctl Language English DE Move F G Adjust Menu Language English Captions Off Caption/T ext CC 1 Key lock Off Parental ctl Key lock Off - The TV can be set up so that it can only be used with the remote control.
Maintenance 49 MISC. Caring for your TV 1. Here ’ s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it ’ s almost dry , and then use it to wipe the screen.
Product Specifications 50 Model L15V26D Horizontal size (inches) 15.2 Height (inches) 14.5 Depth (inches) 7 Weight (pounds) 16 Power requirements AC 1 10-240V ~ 60Hz T elevision system NTSC T elevisio.
T roubleshooting Checklist 51 MISC. SYMPTOMS No power No picture or sound Poor picture but good sound Poor reception Lines in picture Ghosts (multiple images) Remote control does not work. Cannot tune desired channel. CHECK THESE THINGS Is power cord plugged in? Is television turned on? Check batteries in remote control.
ZENITH ELECTRONICS CORPORATION LCD-TV L15V26D LIMITED WARRANTY – USA Zenith will repair or replace your product, at Z enith’ s option, if it proves to be defective in material or workmanship under.
Ein wichtiger Punkt beim Kauf des Geräts LG Electronics L15V26D (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie LG Electronics L15V26D noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für LG Electronics L15V26D - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von LG Electronics L15V26D reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über LG Electronics L15V26D erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon LG Electronics L15V26D besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von LG Electronics L15V26D verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit LG Electronics L15V26D. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei LG Electronics L15V26D gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
