Benutzeranleitung / Produktwartung 55WS10 des Produzenten LG Electronics
Zur Seite of 84
www .lg.c om O WNER’S MANU AL MONIT OR SIGNA GE 42WS10 4 7WS10 55WS10 Please r ead this manual caref ully bef ore operating the your set and re tain it f or futur e r ef erence.
2 ENG ENGLISH T ABLE OF CONTENTS CONTENTS 4 LICENSES 5 ASSEMBLING AND PREP ARING 5 Accessories 6 Optional Accessories 7 Parts and buttons 8 Using the Mounting Cable T ie 8 Connecting the Speakers 9 Co.
3 ENG ENGLISH T ABLE OF CONTENTS 56 TROUBLESHOOTING 59 SPECIFICA TIONS 67 IR CODES 68 CONTROLLING THE MUL TIPLE PRODUCT 68 Connecting the cable 68 RS-232C Configurations 68 Communication Parameter 69 .
ENGLISH 4 LICENSES LICENSES Supported licenses may differ by model. For more information of the licenses, visit www .lg.com. HDMI, the HDMI logo and High -Definitio n Multime dia Inter face are t rademarks or registered trademarks of HDMI Licensing LLC.
5 ENG ENGLISH ASSEMBLING AND PREP ARING ASSEMBLING AND PREP ARING Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may diff er from the actual product and accessories.
6 ENG ENGLISH ASSEMBLING AND PREP ARING Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may dif fer from the actual product and accessories.
7 ENG ENGLISH ASSEMBLING AND PREP ARING y Y ou can set the Power indicator to on or off by selecting OPTION in the main menu. Parts and buttons Screen Marks Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus.
8 ENG ENGLISH ASSEMBLING AND PREP ARING Connecting the Speakers - Only on some models. 1 Connect an input signal cable to use before installing the speakers. 3 After installing your speakers, use holders and cable ties to organize the speaker cables. 2 Mount the speaker by using a screw as shown in the following.
9 ENG ENGLISH ASSEMBLING AND PREP ARING 2 Use the screws to secure the stand on the rear side of the product as shown in the diagram. Connecting the stand - Only on some models. 1 Place a soft cloth on the table and put the product with the screen facing downward.
10 ENG ENGLISH ASSEMBLING AND PREP ARING Portrait Layout - Only on some models. When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).
1 1 ENG ENGLISH ASSEMBLING AND PREP ARING Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer , see the optional T ilt Wall Mounting Bracket Installation and Setup Guide.
12 ENG ENGLISH REMOTE CONTROL REMOTE CONTROL P A G E INPUT ENERGY SA VING MARK ARC ON OFF . , ! A B C D E F G H I J K L M N O P Q RS T U V 1 /a /A - * # W X YZ C LE AR OK S.MENU MONITOR PSM AUTO MUTE BRIGHT NESS MENU ID BACK TILE ON OFF EXIT POWER / I (POWER) T ur ns th e M oni to r o n o r o f f.
13 ENG ENGLISH REMOTE CONTROL P A G E INPUT ENERGY SA VING MARK ARC ON OFF . , ! A B C D E F G H I J K L M N O P Q RS T U V 1 /a /A - * # W X YZ C LE AR OK S.MENU MONITOR PSM AUTO MUTE BRIGHT NESS MENU ID BACK TILE ON OFF EXIT POWER S.
14 ENG ENGLISH USING THE MONITOR SET USING THE MONIT OR Connecting to a PC Y our Monitor supports the Plug & Play* feature. * Plug & Play: This is the function that allows a PC to use the monitor without installing a driver . NOTE y Connect the signal input cable and tighten it by turning the screws clockwise.
15 ENG ENGLISH USING THE MONITOR SET DVI-D connection T ransmits the digital video signal from your PC to the Monitor . Connect the PC and the Monitor set with the DVI cable as shown the following illustrations. Select DVI-D input source on the monitor .
16 ENG ENGLISH USING THE MONITOR SET HDMI connection T ransmits the digital video and audio signals from your PC to the Monitor . Connect the PC and the Monitor with the HDMI cable as shown in the following illustrations. Select HDMI input source. Display Port connection T ransmits the digital video and audio signals from your PC to the Monitor .
17 ENG ENGLISH USING THE MONITOR SET Adjusting the screen Selecting an image mode Display images in its optimized settings by selecting one of the preset image modes. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to PICTURE and press OK .
18 ENG ENGLISH USING THE MONITOR SET Customizing PC display options Customize options of each image mode for the best image quality . y This function works in the following mode: RGB[PC] mode. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to PICTURE and press OK .
19 ENG ENGLISH USING THE MONITOR SET Customizing sound options Y ou may customize options of each sound mode for the best sound quality . 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to AUDIO and press OK . 3 Press the Navigation bu ttons to scroll to Sound Mode and press OK .
20 ENG ENGLISH USING THE MONITOR SET - 4:3 : This selection will allow you to view a picture with an original 4:3 aspect ratio, black bars will appear on both the left and right of the screen. - Zoom : This selection will allow you to view the picture without any alteration, while filling the entire screen.
21 ENG ENGLISH USING THE MONITOR SET Using the input list Selecting an input source 1 Press INPUT to access the input source list. - The connected device displays on each input source. 2 Press the Navigation buttons to scroll to one of the input sources and press OK .
22 ENG ENGLISH ENTERT AINMENT ENTERT AINMENT Connecting to a wired network (Depending on model) Connect the display to a local area network (LAN) via the LAN port as shown on the following illustra- tion and set up the network settings. This monitor only supports a wired network con- nection.
23 ENG ENGLISH ENTERT AINMENT y If you want to access the Internet directly on your display , the internet connection should always be on. y If you cannot access the Internet, check the network conditions from a PC on your network. y When you use Network Setting , check the LAN cable or check if DHCP in the router is turned on.
24 ENG ENGLISH ENTERT AINMENT Tips for using USB storage devices y Only a USB storage device is recognizable. y If the USB storage device is connected through a USB hub, the device is not recog- nizable. y A USB storage device using an automatic recognition programme may not be recog- nized.
25 ENG ENGLISH ENTERT AINMENT y If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source. - Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external power source.
26 ENG ENGLISH ENTERT AINMENT Supported File Formats Viewing movies Play video files on display . Y our display shows all of the video files saved in a USB storage device or shared folder on a PC. 1 Press the Navigation buttons to scroll to My Media and press OK .
27 ENG ENGLISH ENTERT AINMENT Menu Description Play Marked Play the selected movie file. Once a movie file finishes playing, the next selected one will be played automatically . Mark All Mark all movie files on the screen. Unmark All Deselect all marked movie files.
28 ENG ENGLISH ENTERT AINMENT Video options 1 Press MENU to access the Pop-Up menus. 2 Press the Navigation buttons to scroll to Set Video Play ., Set Video. or Set Audio. and press OK . y Option values changed in Movie List does not affect Photo List and Music List .
29 ENG ENGLISH ENTERT AINMENT Code Page Support Language Latin1 English, Spanish, French, German, Italian, Swedish, Finnish, Dutch, Portuguese, Danish, Roma- nian, Norwegian, Albanian, Gaelic, Welsh, .
30 ENG ENGLISH ENTERT AINMENT When you select the Set Video, , 1 Press the Navigation buttons to scroll to make appropriate adjustments. When you select the Set Audio, , 1 Press the Navigation buttons to scroll to show the Sound Mode, Clear V oice II or Balance .
31 ENG ENGLISH ENTERT AINMENT Photo options 1 Press MENU to show the Option menus. 2 Press the Navigation buttons to scroll to Set Photo View ., Set Video. or Set Audio. and press OK . y Option values changed in Movie List does not affect Photo List and Music List.
32 ENG ENGLISH ENTERT AINMENT When you select the Set Photo View , 1 Press the Navigation buttons to scroll to select Slide Speed,T ransition Effect or BGM.
33 ENG ENGLISH ENTERT AINMENT When you select the Set Video , 1 Press the Navigation buttons to scroll to make appropriate adjustments. When you select the Set Audio, 1 Press the Navigation buttons to scroll to show the Sound Mode, Clear V oice II or Balance .
34 ENG ENGLISH ENTERT AINMENT T ime elapsed /Duration 00 2. B 02 .mp 3 00 :31 / 0 4:0 4 file name y Non-supported files are displayed the pre- view image by icon only . y Abnormal files are displayed in the form of bitmap . y A damaged or corrupted music does not play but displays 00:00 in playtime.
35 ENG ENGLISH ENTERT AINMENT 1 Press MENU to access the Pop-Up menus. 2 Press the Navigation buttons to scroll to Set Au- dio Play . or Set Audio. and press OK . Music options y Option values changed in Movie List does not affect Photo List and Music List .
36 ENG ENGLISH ENTERT AINMENT DivX® VOD Guide DivX® VOD Registration In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX registration code from your device at www .divx.com/vod. 1 Press MENU to access the main menus.
37 ENG ENGLISH ENTERT AINMENT y Once the deregistration is executed, you must register your device again to see DivX® VOD contents. DivX® VOD Deregistration Y ou should deregister your device with 8 digit DivX deregistration code from your device at www .
38 ENG ENGLISH ENTERT AINMENT 4 Select a file you want and then press OK . 5 Select the PIP or PBP icon from the play list. 6 For sound select either Main or Sub. Y ou must to select the output sound before running the PIP or PBP function. Select the sound path.
39 ENG ENGLISH CUSTOMIZING SETTINGS CUST OMIZING SETTINGS Accessing main menus 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to one of the following menus and press OK . 3 Press the Navigation buttons to scroll to the setting or option you want and press OK .
40 ENG ENGLISH CUSTOMIZING SETTINGS PICTURE settings 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to PICTURE and press OK . 3 Press the Navigation buttons to scroll to the setting or option you want and press OK . - T o return to the previous level, press BACK .
41 ENG ENGLISH CUSTOMIZING SETTINGS y When using the Smart Energy Saving function, the screen may look saturated in the white area of a still image. y If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is disabled.
42 ENG ENGLISH CUSTOMIZING SETTINGS Setting Description Dynamic Contrast (Off/High/Medium/Low) Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker .
43 ENG ENGLISH CUSTOMIZING SETTINGS AUDIO settings 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to AUDIO and press OK . 3 Press the Navigation buttons to scroll to the setting or option you want and press OK . - T o return to the previous level, press BACK .
44 ENG ENGLISH CUSTOMIZING SETTINGS TIME settings 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to TIME and press OK . 3 Press the Navigation buttons to scroll to the setting or option you want and press OK . - T o return to the previous level, press BACK .
45 ENG ENGLISH CUSTOMIZING SETTINGS Setting Description Language T o choose the language in which the control names are displayed. Power Indicator Use thi s fun ct ion t o set t he po wer ind ic ato r on th e fro nt si de of the p rod uc t t o On or O ff.
46 ENG ENGLISH CUSTOMIZING SETTINGS Setting Description Tile Mode Tile Mode T o use this function - Must be displayed with various other products. - Must be in a function that can be connected to RGB Cable by distributor and RS-232C. T ile mode and choose T ile alignment and set the ID of the current product to set location.
47 ENG ENGLISH CUSTOMIZING SETTINGS Setting Description Key Lock Key input does not work. This prevents invalid key input. Product/Service Info. Displays the model name, software version, serial number , IP address, MAC address and home page. Portrait mode Rotate OSD clockwise (90°,270°) Option 90° Rotate OSD clockwise 90°.
48 ENG ENGLISH CUSTOMIZING SETTINGS T ile Mo de This monitor can be tiled with additional monitors to create a large tiled display . T ile Mo de - N at ura l m ode Whe n a cti ve, t he pa rt of th e i mag e t hat w oul d nor mal ly be di spl aye d i n t he ga p b etw een t he mon ito rs is om itt ed.
49 ENG ENGLISH CUSTOMIZING SETTINGS PIP /PB P Displays v ideos or photos st ored in th e USB dev ice on a single monitor by dividing it into the main and sub screens. (See p.37) P o s i t i o n M o d e S i z e top left top right bottom left bottom right * PI P(P ict ure I n P ict ure ) : Displa ys the Sub s cre en in the ma in sc ree n.
50 ENG ENGLISH CUSTOMIZING SETTINGS NETWORK settings 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to NETWORK and press OK . 3 Press the Navigation buttons to scroll to the setting or option you want and press OK . - T o return to the previous level, press BACK .
51 ENG ENGLISH MAKING CONNECTIONS HDMI - See p.52 Component - See p.52 A V(CVBS) - See p.53 RGB - See p.15 DVI-D - See p.15 HDMI - See p.16 Display Port - See p.16 LAN - See p.54 HDMI - See p.52 Component - See p.52 A V(CVBS) - See p.53 HDMI - See p.52 Component - See p.
52 ENG ENGLISH MAKING CONNECTIONS HDMI C o nn ec ti ng t o a HD r e ce iv er , D V D, C am co rd er , Ca m e r a, G am in g D ev i ce o r V CR pl ay e r Connect a HD receiver , DVD, or VCR player to the Monitor and select an appropriate input mode.
53 ENG ENGLISH MAKING CONNECTIONS AU DI O OUT V IDE O OUT A V(CVBS) connection T ransmits the analog video and audio signals from an external device to the Monitor . Connect the external device and the Monitor with the 15 pin signal to RCA cable as shown on the following illustration.
54 ENG ENGLISH MAKING CONNECTIONS Connecting to the LAN y Using LAN establishes communication between your PC and the monitor and enables to use the OSD menus on the PC as well as on the monitor . LAN connection A Connect PC to Monitor directly . B Using a router(Switch) C Using the Internet.
55 ENG ENGLISH MAKING CONNECTIONS RG B OU T ( PC ) V ID E O AU DI O O U T V ID E O OU T Daisy Chain Monitors Use this function to share the RGB video signal with other monitors without having to use a separate signal splitter box.
56 ENG ENGLISH TROUBLESHOOTING TROUBLESHOOTING No image is displayed Problem Resolution Is the product power cord connected? y See if the power cord is properly connected to the outlet. Is the power indicator light on? y See if the power switch is turned on.
57 ENG ENGLISH TROUBLESHOOTING 'Key Lock On' message appears. Problem Resolution The 'Key Lock On' message appears when pressing the Menu button. The Lock function prevents the OSD settings from being changed inadvertently . T o release the lock, go to Menu and Option and disable the Key Lock option.
58 ENG ENGLISH TROUBLESHOOTING Screen color is abnormal. Problem Resolution Screen has p oor c olor r esolu tion (16 colors). y Set the number of colors to more than 24 bits (true color) Select Control Panel - Display - Settings - Color T able menu in Windows.
59 ENG ENGLISH SPECIFICA TIONS SPECIFICA TIONS LCD Panel Screen T ype 1067.31 mm Wide (42 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1067.31 mm Pixel Pitch 0.4845 mm (H) x 0.4845 mm (V) Video Signal Max.
60 ENG ENGLISH SPECIFICA TIONS Dimensions (Width x Height x Depth) / Weight 99 1. 7 m m x 5 84 .3 m m x 3 7.5 m m / 12. 6 kg 99 1. 7 m m x 6 59 .2 m m x 2 98. 3 mm / 14 k g 99 1. 7 m m x 5 84 .3 m m x 7 5.7 m m / 13. 4 kg 99 1. 7 m m x 65 9.2 mm x 29 8.
61 ENG ENGLISH SPECIFICA TIONS LCD Panel Screen T ype 1 192.78 mm Wide (47 inch) TFT (Thin Film T ransistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1 192.
62 ENG ENGLISH SPECIFICA TIONS Dimensions (Width x Height x Depth) / Weight 1 102 .0 mm x 64 6.4 mm x 37. 4 mm / 17 .5 kg 1 102 .0 mm x 72 0.9 mm x 298 .3 mm / 1 8.9 k g 1 102 .0 mm x 64 6.4 mm x 74. 1 mm / 18 .3 kg 1 102 .0 mm x 7 20.9 mm x 29 8. 3 m m / 19.
63 ENG ENGLISH SPECIFICA TIONS LCD Panel Screen T ype 1387.80 mm Wide (55 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1387.
64 ENG ENGLISH SPECIFICA TIONS Dimensions (Width x Height x Depth) / Weight 12 81 .6 mm x 75 2.4 mm x 37. 8 mm / 21 .8 kg 12 81 .6 mm x 82 5.7 mm x 298 .3 mm /23 .2 kg 12 81 .6 mm x 75 2.4 mm x 79. 1 mm / 22 .5 kg 12 81 .6 mm x 8 25.7 mm x 2 98 .3 m m / 2 3.
65 ENG ENGLISH SPECIFICA TIONS 42 inch 47 inch 55 inch A 991.7 1 102.0 1281.6 B 298.3 298.3 298.3 C 37.5 37.5 37.8 D 76.1 76.1 80.0 E 584.3 646.4 752.4 F 659.2 720.9 825.7 G 726.0 824.2 950.0 H 27.6 28.0 33.5 I 27.6 28.0 33.5 J 27.6 28.0 33.5 K 102.4 102.
66 ENG ENGLISH SPECIFICA TIONS RGB (PC) supported mode Resolution Horizontal Frequency(kHz) V ertical Frequency(Hz) 640 x 350 31.469 70.8 720 x 400 31.468 70.8 640 x 480 31.469 59.94 640 x 480 37.5 75 800 x 600 37.879 60.317 800 x 600 46.875 75 832 x 624 49.
67 ENG ENGLISH IR CODES Code (Hexa) Function Note 95 R/C BUTTON 08 ON/OFF R/C BUTTON 0B R/C BUTTON C4 R/C BUTTON (Discrete IR Code) C5 R/C BUTTON (Discrete IR Code) 43 R/C BUTTON 40 Up R/C BUTT ON 41 .
68 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT CONTROLLING THE MUL TIPLE PRODUCT y Use this method to connect several products to a single PC. Y ou can control several products at a time by connecting them to a single PC. y In the Option menu, Set ID must be between 1 and 99 without being duplicated.
69 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT Command reference list C O MM AN D D A T A 1 Power k a 00H to 01H 2 Aspect Ratio k c 01H to 1FH 3 Screen Mute k d 00H to 01H 4 V olume Mute k e 00H to .
70 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT C O MM AN D D A T A 43 Auto Sleep f g 00H to 01H 44 Power On Delay f h 00H to 64H 45 Language f i 00H to 12H 46 DPM Select f j 00H to 01H 47 Reset f k 00H to 03H 48 Power Indicator f o 00H to 01H 49 Serial no.
71 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT T ran smi ssi on [C omm a nd 1][ Com ma nd2 ][ ][S et ID ][ ][D at a][ Cr] * [Co m ma nd 1]: F irs t c omm an d. (k, j, m , d , f , x ) * [Co m ma nd 2]: S eco nd com ma nd. (a to u) * [Se t I D]: Se t up the Se t ID num ber o f p rod uct .
72 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 01. Power (Command: k a) T o control Power On/Off of the set. T ransmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On Acknowledgement [a][ ][Set ID][ ][OK][Data][x] T o show the status of Power On/Off.
73 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 06. Contrast (Command: k g) T o adjust screen contrast. Y ou can also adjust the contrast in the Picture menu. T ransmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00H to Max : 64H Acknowledgement [g][ ][Set ID][ ][OK][Data][x] Data Min : 00H to Max : 64H * Refer to 'Real data mapping ’.
74 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 12. Remote Lock /Key Lock (Command: k m) T o control Remote Lock on/off to the set. This function, when controlling RS-232C, locks the remote control and the local keys.
75 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 17. White Balance Red Gain (Command: j m) T o adjust white balance red gain. T ransmission [j][m][ ][Set ID][ ][Data][Cr] Data 00~FE: Red gain 0~254 Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] 20.
76 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 23. Key (Command: m c) T o send IR remote key code. T ransmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code : Refer to ‘IR CODES’. Acknowledgement [c][ ][Set ID][ ][OK][Data][x] 26. 4 Hours Off (Command: m n) T o set the 4 Hours Off function.
77 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 28. T ile Mode (Command: d d) Change a T ile Mode. T ransmission [d][d][ ][Set ID][ ][Data][Cr] Data Description 00 or 1 1 Tile mode is off. 12 1 x 2 mode (column x row) 13 1 x 3 mode 14 1 x 4 mode ... .
78 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 34. Natural Mode (Command: d j) T o assign the T ile Natural mode for T iling function. T ransmission [d][j][ ][Set ID][ ][Data][Cr] Data 00 : Natural Off 01 : Natural On ff : Read Status Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] 37.
79 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 40. Lamp fault Check (Command: d p) T o check lamp fault. T ransmission [d][p][ ][Set ID][ ][Data][Cr] * The data is always FF(in Hex). Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] * The data is 1 byte long in Hexadecimal.
80 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 47. Reset (Command: f k) Execute the Picture, Screen and Factory Reset functions. T ransmission [f][k][ ][Set ID][ ][Data][Cr] Data 00 : Picture Reset (Reset the values set in the PICTURE menu.) 01 : Screen Reset (Reset the values set in under the Screen option.
81 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 50. S/W V ersion (Command: f z) Check the software version. T ransmission [f][z][ ][Set ID][ ][Data][Cr] Data FFH : Read Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] 53. Off T imer(Repeat Mode/ Time) (Command: f e) T o set the Off Timer(Repeat mode/ T ime) function.
82 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 54. On T imer(Repeat Mode/ T ime) (Command: f d) T o set the On T imer(Repeat mode/ T ime) function. T ransmission [f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 00: Repeat Off 01: Repeat Once 02.
83 ENG ENGLISH CONTROLLING THE MUL TIPLE PRODUCT 59. Input Select (Command: x b) T o select input source for the Set. T ransmission [x][b][ ][Set ID][ ][Data][Cr] Data 20: A V(CVBS) 40: Component 60: RGB(PC) 70: DVI-D 90: HDMI(DTV) A0: HDMI(PC) C0: Display Port(DTV) D0: Display Port(PC) Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] 60.
Mak e su r e t o r ead the S af et y P re cauti ons bef ore u sing the p ro duct . K eep th e Owne r's Ma nua l( CD ) i n an a cc e ss ib le place f or futu re r ef erenc e. The mo del a nd s erial numb er o f the SET is locat ed on the back and one s ide o f the SET .
Ein wichtiger Punkt beim Kauf des Geräts LG Electronics 55WS10 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie LG Electronics 55WS10 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für LG Electronics 55WS10 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von LG Electronics 55WS10 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über LG Electronics 55WS10 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon LG Electronics 55WS10 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von LG Electronics 55WS10 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit LG Electronics 55WS10. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei LG Electronics 55WS10 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
