Benutzeranleitung / Produktwartung SL-6703 des Produzenten Lenoxx
Zur Seite of 24
IB-SL6703(T A)-PRADO-E-091802 3 CD HOME STEREO AM/FM DUAL CASSETTE RECORDER WITH REMOTE CONTROL MODEL SL-6703 PROGRAMMABLE CD PLA YER WITH REPEA T PLA Y FLUORESCENT MUL TI-COLOR VFD DISPLA Y .
IB-SL6703(T A)-PRADO-E-091802 TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IB-SL6703(T A)-PRADO-E-091802 ADDITIONAL SAFETY INSTRUCTIONS 1 . Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2 . Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
IB-SL6703(T A)-PRADO-E-091802 CONNECTING THE AC POWER CORD Insert one end of the supplied AC power cord into the socket located at the back of the set, and the other end to the wall outlet. 3 AC SOCKET T o a wall outlet A TT ACHING THE SPEAKERS TIP If the plug of the AC power cord does not match your outlet, do not force it.
IB-SL6703(T A)-PRADO-E-091802 REMOTE CONTROL Y ou can control the CD PLA YER with the provided REMOTE CONTROL (including the functions of POWER ON/OFF , MUTE, CONTINUOUS PLA Y , DISC CHANGE, VOLUME control, CD REPEA T and PLA Y features). Slide the battery cover to remove.
IB-SL6703(T A)-PRADO-E-091802 PLA YING A CD 1 Press the POWER switch, the VFD display will turn on. 1 3&5 Open the CD DOOR by pressing the OPEN/CLOSE button and place the CD in the NO.1 disc compartment. The label side of the CD should face upward.
IB-SL6703(T A)-PRADO-E-091802 USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS T o Press or Adjust Adjust the volume VOLUME control Stop playback Pause playback will flash during pause.
IB-SL6703(T A)-PRADO-E-091802 REPEA T PLA Y PLA YING CD SONGS (TRACKS) OVER AND OVER T o repeat Press a single track (song) Press the REPEA T button once all the tracks (all songs) Y ou can play CD tracks over and over in normal or programmed play modes (see page 8).
IB-SL6703(T A)-PRADO-E-091802 8 Y ou can make a program of up to 15 tracks to play in the order you want them to be played. PROGRAM PROGRAMMED CD PLA Y SELECTING YOUR OWN MUSIC PLA YING ORDER NOTE : Programming is only done during stop mode. 1 2 3 4 5 During STOP mode, press the PROGRAM button.
IB-SL6703(T A)-PRADO-E-091802 LISTENING TO THE RADIO Set the FUNCTION switch to RADIO position. 1 2 1 2 3 Set the BAND switch to the proper band position (AM or FM), and set the FM MODE switch to STEREO or MONO. Tune into the station you prefer using the TUNING control.
IB-SL6703(T A)-PRADO-E-091802 USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Press or Set Adjust the volume VOLUME control (UP or DOWN). TIP • If the FM broadcast is noisy , set the FM MODE switch from STEREO to MONO. Turn off the Radio Set the FUNCTION switch to T APE position or press the POWER switch.
IB-SL6703(T A)-PRADO-E-091802 PLA YING A T APE Press the STOP/EJECT button (DECK A or DECK B) to open the tape compartment and insert a recorded tape. Close the door . 2 2 3 Press the PLA Y button. The player turns on and starts playing. PLA Y Set the FUNCTION switch to T APE position.
IB-SL6703(T A)-PRADO-E-091802 RELA Y PLA Y 3 4 Press the cassette P AUSE button on DECK B. 3 1 Press the cassette PLA Y button on DECK A, DECK A will play . 2 T o play tapes in DECK A and then DECK B, follow the steps below: Press the cassette PLA Y button on DECK B.
IB-SL6703(T A)-PRADO-E-091802 USE THESE BUTTONS FOR ADDITIONAL CASSETTE T APE OPERA TIONS To Stop playback Eject the cassette Press or Adjust Adjust the volume Press the VOLUME button ( UP or DOWN) Fast forward or rewind the tape F AST FOR WARD button or REWIND button Pause playback P AUSE button Press again to resume play after pause.
IB-SL6703(T A)-PRADO-E-091802 RECORDING ON A T APE Press the STOP/EJECT button (DECK B) to open the tape compartment and insert a blank tape. Select the program source (MW , FM, CD, or microphone) you want to record.
IB-SL6703(T A)-PRADO-E-091802 USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Turn off the power Press the STOP/EJECT button and press the POWER switch, the VFD display will go off. TIP Press or Set Stop recording STOP/EJECT button P AUSE button Press the button again to resume recording.
IB-SL6703(T A)-PRADO-E-091802 SINGING ALONG WITH KARAOKE FUNCTION 1 2 3 4 Insert microphone plug into the microphone jack. T o avoid mic howling, lower the volume level setting first. T o sing along with the CD player , set the FUNCTION switch to CD position, insert a KARAOKE CD disc and follow the steps to play a CD (see page 5).
IB-SL6703(T A)-PRADO-E-091802 USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Press or Adjust Adjust the MIC volume VOLUME control VOLUME CONTROL 17 TIP : If there is squealing or howling (feedback) noise during KARAOKE use, move the microphone away from the speakers or turn down the volume.
IB-SL6703(T A)-PRADO-E-091802 PRECAUTIONS On Safety As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet.
IB-SL6703(T A)-PRADO-E-091802 PRECAUTIONS (continued) Notes on CDs Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. Do not use solvents such as benzene, thinner , commercially available cleaners or anti-static spray intended for vinyl LPs.
IB-SL6703(T A)-PRADO-E-091802 MAINTENANCE Cleaning the T ape Heads Wipe the heads, the pinch roller and the capstan with a cleaning swab slightly moistened with cleaning fluid or alcohol after every 10 hours of operation for optimum playback and recording quality .
IB-SL6703(T A)-PRADO-E-091802 TROUBLE SHOOTING Problem Remedy The power is not on Connect the AC power cord to a wall outlet securely . There is no sound Make sure the FUNCTION switch is at the right position as you want. Adjust the volume.
IB-SL6703(T A)-PRADO-E-091802 SPECIFICA TION General Description Power source: AC 120V , 60Hz 28W atts DC 2 size AAA batteries for Remote Control (Alkaline batteries are recommended) Speakers (2 ways): and 2 - 5 4 ohm woofers 2 - 3 4 ohm tweeters with crossover Output power: 5.
IB-SL6703(T A)-PRADO-E-091802 23 LIMITED W ARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a period of 90 days after purchase and we will repai.
Ein wichtiger Punkt beim Kauf des Geräts Lenoxx SL-6703 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Lenoxx SL-6703 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Lenoxx SL-6703 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Lenoxx SL-6703 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Lenoxx SL-6703 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Lenoxx SL-6703 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Lenoxx SL-6703 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Lenoxx SL-6703. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Lenoxx SL-6703 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
