Benutzeranleitung / Produktwartung T61p des Produzenten Lenovo
Zur Seite of 178
T hinkP a d ® T6 1 an d T6 1p (1 4 . 1-in c h ) Hard w ar e M a in t e n a n ce Ma nu a l.
.
T hinkP a d ® T6 1 an d T6 1p (1 4 . 1-in c h ) Hard w ar e M a in t e n a n ce Ma nu a l.
Note Before using this information and the pr oduct it supports, be sure to read the general information under “Notices” on page 167. Fifth Edition (September 2011) © Copyright L enovo 2007, 2011.
Contents About this manual . . . . . . . . . .v Safety information . . . . . . . . . .1 General safety . . . . . . . . . . . . . .2 Electrical safety . . . . . . . . . . . . .3 Safety inspection guide . . . . . . . . . . .5 Handling devices that are sensitive to electr ostatic discharge .
Recovery discs . . . . . . . . . . . . 156 Common service tools . . . . . . . . . 165 Notices . . . . . . . . . . . . . . 167 T rademarks . . . . . . .
About this manual This manual contains service and refer ence information for the following ThinkPad ® products. ThinkPad T61 and T61p (14.1-inch) MT 8889, 8890, 8891, 8892, 8893, 8894, 8895, 8896, 8897, 8898, 8899, 8900, 8938, and 8939 Use this manual along with the advanced diagnostic tests to troubleshoot problems.
vi ThinkPad T61 and T61p (14.1-inch) Hardwar e Maintenance Manual.
Safety information This chapter presents following safety information that you need to be familiar with before you service a ThinkPad computer . v “General safety” on page 2 v “Electrical safety.
General safety Follow these rules to ensur e general safety: v Observe good housekeeping in the area of the machines during and after maintenance. v When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet.
Electrical safety Observe the following rules when working on electrical equipment. v Find the room emer gency power-of f (EPO) switch, disconnecting switch, or electrical outlet. If an electrical accident occurs, you can then operate the switch or unplug the power cord quickly .
v Do not touch live electrical circuits with the r eflective surface of a plastic dental mirror . The surface is conductive; such touching can cause personal injury and machine damage.
Safety inspection guide The purpose of this inspection guide is to assist you in identifying potentially unsafe conditions. As each machine was designed and built, requir ed safety items were installed to pr otect users and service personnel from injury .
Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electr ostatic discharge (ESD.) ESD damage can occur when there is a dif ference in charge between objects.
Safety notices: multilingual translations The safety notices in this section are pr ovided in English, French, German, Hebrew , Italian, Japanese, and Spanish. Safety notice 1 Before the computer is power ed on after FRU replacement, make sure all scr ews, springs, and other small parts are in place and ar e not left loose inside the computer .
Safety notice 2 D ANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery , recharge it, throw it into fire or water , or short-circuit it. Dispose of the battery as required by local ordinances or regulations.
Safety notice 3 D ANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water , or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
Safety notice 4 D ANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector , disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water . Dispose of the battery as required by local ordinances or regulations.
Safety notice 5 If the LCD breaks and the fluid fr om inside the LCD gets into your eyes or on your hands, immediately wash the affected ar eas with water for at least 15 minutes. Seek medical care if any symptoms fr om the fluid are present after washing.
Safety notice 6 D ANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation.
Safety notice 8 D ANGER Before removing any FRU, power off the computer , unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables.
Laser compliance statement Some models of ThinkPad computer are equipped fr om the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.
A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: D ANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.
16 ThinkPad T61 and T61p (14.1-inch) Hardwar e Maintenance Manual.
Important service information This chapter presents following important service information: v “Strategy for replacing FRUs” – “Strategy for replacing a har d disk drive” on page 18 – “I.
v Some computers have both a processor boar d and a system board. If you ar e instructed to r eplace either the processor boar d or the system board, and replacing one of them does not corr ect the problem, reinstall that boar d, and then replace the other one.
Strategy for replacing FRUs for CTO, CMV , and GA V Product definition Dynamic Configure To Order (CTO) This provides the ability for a customer to configur e an IBM ® or a Lenovo ™ solution from an eSite, and have this configuration sent to fulfillment, wher e it is built and shipped directly to the customer .
warranty.vm&sitestyle=lenovo Select W arranty lookup. Input the MT and the Serial number and the list of key commodities will be returned in the PEW r ecord under COMPONENT INFORMA TION. v Business Partners using Eclaim will access PEW when performing Entitlement Lookup.
Important information about replacing RoHS compliant FRUs RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry . RoHS requirements must be implemented on Lenovo products placed on the market after June 2006.
22 ThinkPad T61 and T61p (14.1-inch) Hardwar e Maintenance Manual.
General checkout This chapter presents following information: v “What to do first” on page 24 v “Checkout guide” on page 25 – “Diagnostics using PC-Doctor for DOS” on page 26 – “PC-D.
What to do first When you do return a FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: __ 1. Name and phone number of servicer __ 2. Date of service __ 3. Date on which the machine failed __ 4.
Checkout guide Use the following procedur es as a guide in identifying and correcting problems with the ThinkPad computer . Note: The diagnostic tests are intended to test only ThinkPad pr oducts. The use of non-ThinkPad products, pr ototype cards, or modified options can lead to false indications of errors and invalid system r esponses.
Diagnostics using PC-Doctor for DOS The ThinkPad computer has a test program called PC-Doctor for DOS (her eafter called PC-Doctor .) Yo u can detect err ors by running the diagnostics test included in PC-Doctor . This section is an overview of the procedure.
On the first screen, select the model and pr ess Enter . Follow the instructions on the screen. 2. The main panel of PC-Doctor appears. 3. Select Diagnostics with the arrow keys, and pr ess Enter . A pull-down menu appears. (Its exact form depends on the model.
5. Follow the instructions on the scr een. If there is a problem, PC-Doctor shows messages describing it. 6. To exit the test, select Quit — Exit Diag . To cancel the test, press Esc. Note: After running PC-Doctor , check the time and date on the system and reset them if they are incorr ect.
Detecting system information with PC-Doctor PC-Doctor can detect the following system information: Hardware Info v System Configuration v Memory Contents v Physical Disk Drives v Logical Disk Drives v.
Power system checkout To verify a symptom, do the following: 1. T urn off the computer . 2. Remove the battery pack. 3. Connect the ac adapter . 4. Check that power is supplied when you turn on the computer . 5. T urn off the computer . 6. Disconnect the ac adapter and install the charged battery pack.
Checking operational charging To check whether the battery charges properly during operation, use a dischar ged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer . Perform operational charging.
Checking the backup battery Do the following: 1. Power off the computer , and unplug the ac adapter from it. 2. T urn the computer upside down. 3. Remove the battery pack (see “1010 Battery pack” on page 62). 4. Remove the backup battery (see “1 100 Backup battery” on page 80).
Related service information This chapter presents following information: v “Restoring the factory contents by using Product Recovery discs” v “Passwords” on page 34 v “Power management” on.
5. Yo u will then be prompted to insert Product Recovery Disk 1 into the optical drive. Insert the Product Recovery Disk 1 into the optical drive, and pr ess OK . In similar fashion, you will be prompted to insert the r emaining recovery discs until all the files are copied.
Hard-disk password There ar e two hard-disk passwords (HDPs): v User HDP—for the user v Master HDP—for the system administrator , who can use it to get access to the hard disk even if the user has changed the user HDP Note: There ar e two modes for the HDP: User only and Master + User .
For models supporting the Passphrase function, press F1 while the POP icon is appearing on the screen; then enter the POP . For the other models, enter the POP . Note: To check whether the ThinkPad computer supports the Passphrase function, enter the BIOS Setup Utility and go to Security --> Password .
Power management To reduce power consumption, the computer has three power management modes: screen blank, standby , and hibernation. Screen blank mode If the time set on the “T urn off monitor” timer in the operating system expir es, the LCD backlight turns off.
v The ring indicator (RI) is signaled by a serial device or a PC Card device. v The time set on the resume timer elapses. Note: The computer does not accept any input immediately after it enters standby mode. W ait a few seconds before taking any action to r eenter operation mode.
Symptom-to-FRU index This section contains following information: v “Numeric error codes” v “Error messages” on page 43 v “Beep symptoms” on page 44 v “No-beep symptoms” on page 44 v .
T able 1. Numeric error codes (continued) Symptom or error FRU or action, in sequence 0187 EAIA data access error—The access to EEPROM is failed. System board. 0188 Invalid RFID Serialization Information Area. System board. 0189 Invalid RFID configuration information area—The EEPROM checksum is not corr ect.
T able 1. Numeric error codes (continued) Symptom or error FRU or action, in sequence 0250 System battery error—System battery is dead. 1. Charge the backup battery for more than 8 hours by connecting the ac adapter . 2. Replace the backup battery and ru n BIOS Setup Utility to reset the time and date.
T able 1. Numeric error codes (continued) Symptom or error FRU or action, in sequence 1804 Unauthorized WA N card is plugged in—Power off and r emove the WA N card. 1. Remove the WA N card that you installed. 2. System board. 1805 Unauthorized W ireless USB car d is plugged in—Power off and r emove the W ireless USB card.
Error messages T able 2. Error messages Symptom or error FRU or action, in sequence Device address conflict. 1. Load “Setup Defaults” in the BIOS Setup Utility . 2. Backup battery . 3. System board. Allocation error for device. 1. Load “Setup Defaults” in the BIOS Setup Utility .
Beep symptoms T able 3. Beep symptoms Symptom or error FRU or action, in sequence One beep and a blank, unreadable, or flashing LCD. 1. Reseat the LCD connector . 2. LCD assembly . 3. External CRT . 4. System board. One long and two short beeps, and a blank or unreadable LCD.
LCD-related symptoms T able 5. Minimum quantity of defective pixels required for LCD replacement on June 2006 or later manufactured ThinkPad LCD resolution Bright dots Dark dots Bright and dark dots X.
Intermittent problems Intermittent system hang problems can be due to a variety of causes that have nothing to do with a hardwar e defect, such as cosmic radiation, electrostatic discharge, or softwar e errors. FRU replacement should be consider ed only when a problem r ecurs.
ThinkPad T61 and T61p (14.1-inch) This chapter presents following pr oduct-specific service references and product-specific parts information. v “Specifications” v “Status indicators” on page .
T able 7. Specifications (continued) Feature Description Standard memory v 512-MB DDR2-667 SDRAM SO-DIMM (PC2-5300) card × 1 v 1-GB DDR2-667 SDRAM SO-DIMM (PC2-5300) card × 1 v 2-GB DDR2-667 SDRAM S.
T able 7. Specifications (continued) Feature Description Modem v ThinkPad Modem (MDC-1.5, 56 kbps HDA) T ouch pad v UltraNav ® ThinkLight ® Ye s Battery v Li-ion battery (6 cells) 5.
Status indicators The system status indicators show the status of the computer , as follows: 1 2 3 4 5 6 7 8 9 10 11 8 9 10 50 ThinkPad T61 and T61p (14.
T able 8. Status indicators Indicator Meaning 1 W ireless status Green: The wireless featur e (the IEEE 802.1 1 standard or IEEE 802.1 1n) is on, and the radio link is ready for use. Blinking green: Data is being transmitted. 2 W ireless PA N status R Green: Bluetooth wireless is operational.
T able 8. Status indicators (continued) Indicator Meaning 11 Ultrabay Slim status Green: An Ultrabay Slim device is installed and in use. Blinking green: An Ultrabay Slim device is in the process of being detached. T urn off: An Ultrabay Slim device is ready to be attached or detached.
FRU tests The following table shows the test for each FRU. T able 9. FRU tests FRU Applicable test System board 1. Diagnostics --> CPU/Coprocessor 2. Diagnostics --> Systemboard 3. If the ThinkPad Advanced Dock, the ThinkPad Advanced Mini Dock or the ThinkPad Essential Port Replicator is attached to the ThinkPad computer , detach it.
T able 9. FRU tests (continued) FRU Applicable test Diskette drive 1. Diagnostics --> Diskette Drives 2. Interactive T ests --> Diskette DVD drive or DVD/CD-R W combo drive 1. Diagnostics --> Other Devices --> Optical Drive 2. Interactive T ests --> Optical Drive T est Memory 1.
Fn key combinations The following table shows the function of each combination of Fn with a function key . T able 10. Fn key combinations Key combination Description Fn+F1 Reserved. Fn+F2 Reserved. Fn+F3 Select a power scheme that has been created by Power Manager .
T able 10. Fn key combinations (continued) Key combination Description Fn+F7 Apply a presentation scheme dir ectly , with no need to start Presentation Dir ector . To disable this function and use the Fn+F7 key combination for switching a display output location, start Presentation Dir ector , and change the settings.
T able 10. Fn key combinations (continued) Key combination Description Fn+Spacebar Enable the FullScreen Magnifier function. Fn+PrtSc Has the same function as the SysRq key . Fn+ScrLk Enable or disable the numeric keypad. Fn+Pause Has the same function as the Break key .
FRU replacement notices This section contains notices related to r emoving and replacing parts. Read this section carefully befor e replacing any FRU. Screw notices Loose screws can cause a r eliability problem.
Retaining serial numbers This section includes the following descriptions: v “Restoring the serial number of the system unit” v “Retaining the UUID” v “Reading or writing the ECA information.
Reading or writing the ECA information Information on Engineering Change Announcements (ECA) are stor ed in the EEPROM of the system board. The electr onic storage of this information simplifies the procedur e to check if the ECA has been previously applied to a machine.
Removing and replacing a FRU This section presents dir ections and drawings for use in removing and replacing a FRU. Be sure to observe the following general r ules: 1. Do not try to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts.
1010 Battery pack D ANGER T able 11 . Removal steps of battery pack Unlock the battery release lever 1 . Holding the battery r elease lever in the unlocked position 2 , remove the battery pack in the dir ection shown by arrow 3 . 1 2 3 When installing: Install the battery pack along the slide rails of the slot.
1020 Ultrabay Slim device T able 12. Removal steps of Ultrabay Slim device When you release the switch in step 1 , the lever pops out. In step 2 , pull the lever a little to release the device fr om the bay .
1030 Hard disk drive (HDD) cover , HDD, and HDD rubber rails For access, remove this FRU: v “1010 Battery pack” on page 62 T able 13. Removal steps of HDD cover , HDD, and HDD rubber rails 1 Step Screw (quantity) Color T orque 1 Hard disk drive scr ew , nylon-coated (1) Black 0.
T able 13. Removal steps of HDD cover , HDD, and HDD rubber rails (continued) 4 3 When installing: Make sure that the har d disk drive connector is attached firmly . 5 5 When installing: The rubber rails on the har d disk drive must be attached to the replacement drive.
1040 Palm rest or palm rest with fingerprint reader For access, remove this FRU in or der: v “1010 Battery pack” on page 62 T able 14. Removal steps of palm rest 1 1 1 1 Step Icon Screw (quantity) Color T orque 1 M2 × 14 mm, flat-head, nylon-coated (4) Black 0.
T able 14. Removal steps of palm rest (continued) 2 2 3 4 T able 15. Installation of the palm rest When installing: When you attach the palm rest, do as follows: ThinkPad T61 and T61p (14.
T able 15. Installation of the palm rest (continued) 1. Attach the fingerprint reader connector firmly to the system boar d. 2. Press the left and right top edges of the palm r est to fit it into place.
T able 15. Installation of the palm rest (continued) 3. Push the front side of the palm r est until it clicks into place. 4. Close the LCD cover , and turn the computer over . Then fasten the four screws to secure the palm r est. ThinkPad T61 and T61p (14.
1050 DIMM For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1040 Palm rest or palm r est with fingerprint reader” on page 66 T able 16. Removal steps of DIMM Note: If only one DIMM is used on the computer you are servicing, the car d must be installed in SLOT -0 ( a ), but not in SLOT -1 ( b ).
1060 Keyboard For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1040 Palm rest or palm r est with fingerprint reader” on page 66 T able 17. Removal steps of keyboard 1 Step Icon Screw (quantity) Color T orque 1 M2 × 14 mm, flat-head, nylon-coated (1) Black 0.
T able 17. Removal steps of keyboard (continued) When installing: Make sure that the keyboar d edges a are under the frame as shown in this figure.
1070 Modem daughter card (MDC-1.5) For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1040 Palm rest or palm r est with fingerprint reader” on page 66 v “1060 Keyboard” on page 71 T able 18. Removal steps of MDC-1.
T able 18. Removal steps of MDC-1.5 (continued) T urn the card over 4 , and detach the modem connector 5 . 4 5 When installing: Make sure that the modem connector and the connector on the underside of the card ar e attached firmly . 74 ThinkPad T61 and T61p (14.
1080 PCI Express Mini Card for wireless LAN For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1040 Palm rest or palm r est with fingerprint reader” on page 66 v “1060 Keyboard” on page 71 T able 19.
T able 19. Removal steps of PCI Express Mini Card for wireless LAN (continued) 3 T able 20. Installation of the PCI Express Mini Card for wireless LAN When installing the card, do as follows: v Plug the gray cable into the jack labeled MAIN on the card, and the black cable into the jack labeled AUX .
T able 20. Installation of the PCI Express Mini Card for wireless LAN (continued) v Some ThinkPad computer has three cables and the 802.1 1 a/b/g/n wireless LAN card.
1090 PCI Express Mini Card for wireless WA N For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1040 Palm rest or palm r est with fingerprint reader” on page 66 v “1060 Keyboard” on page 71 T able 21.
T able 21. Removal steps of PCI Express Mini Card for wireless WAN (continued) 3 ThinkPad T61 and T61p (14.1-inch) 79.
1 100 Backup battery D ANGER For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1040 Palm rest or palm r est with fingerprint reader” on page 66 v “1060 Keyboard” on page 71 T able 22. Removal steps of backup battery 1 2 When installing: Make sure that the battery connector is attached firmly .
111 0 SIM card slot For access, remove these FRUs, in or der: v “1010 Battery pack” on page 62 v “1040 Palm rest or palm r est with fingerprint reader” on page 66 v “1060 Keyboard” on page 71 Note: If the SIM card has been inserted in its slot, r emove it before you start the servicing.
1 120 Keyboard bezel For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1040 Palm rest or palm r est with fingerprint reader” on page 66 v “1060 Keyboard” on page 71 T able 24. Removal steps of keyboard bezel 1 2 Step Screw (quantity) Color T orque 1 M2 × 14 mm, flat-head, nylon-coated (1) Black 0.
T able 24. Removal steps of keyboard bezel (continued) 4 4 3 In step 3 , release the wir eless antenna cables from the cable guide. Step Screw (quantity) Color T orque 4 M2 × 3.5 mm, flatl-head, nylon-coated (2) Black 0.167 Nm (1.7 kgfcm) In step 5 , detach the claws.
1 130 Fan assembly For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1040 Palm rest or palm r est with fingerprint reader” on page 66 v “1060 Keyboard” on page 71 v “1 120 Keyboar d bezel” on page 82 T able 25.
T able 25. Removal steps of fan assembly (continued) 4 4 5 5 Step Screw (quantity) Color T orque 4 M2 × 9.5 mm, flat-head, nylon-coated (3) Black 0.167 Nm (1.7 kgfcm) Attention: Do not handle the fan roughly . Improper handling of the fan can cause distortion or deformation and imperfect contact with components.
T able 26. Installation of the fan assembly When installing the fan assembly , do as follows: v Before you attach the fan assembly to the computer , apply thermal grease, at an amount of 0.2 grams, on the part marked a as in the following figure.
1 140 CPU For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1040 Palm rest or palm r est with fingerprint reader” on page 66 v “1060 Keyboard” on page 71 v “1 120 Keyboar d bezel” on page 82 v “1 130 Fan assembly” on page 84 Attention: CPU is extremely sensitive.
1 150 LCD assembly For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1040 Palm rest or palm r est with fingerprint reader” on page 66 v “1060 Keyboard” on page 7.
T able 28. Removal steps of LCD assembly (continued) 3 3 2 4 4 Step Screw (quantity) Color T orque 3 M2 × 5 mm, flat-head, nylon-coated (2) Black 0.167 Nm (1.7 kgfcm) In step 4 , strip off the tapes securing the antenna cables, and r elease the cables from the cable guides of the frame.
T able 28. Removal steps of LCD assembly (continued) 5 5 When installing: 1. As you route the cables, make sur e that they are not subjected to any tension. T ension could cause the cables to be damaged by the cable guides, or a wire to be br oken. 2.
1 160 Base cover For access, remove these FRUs, in or der: v “1010 Battery pack” on page 62 v “1020 Ultrabay Slim device” on page 63 v “1030 Hard disk drive (HDD) cover , HDD, and HDD rubber.
T able 29. Removal steps of base cover (continued) 2 3 2 Step Screw (quantity) Color T orque 2 M2 × 14 mm, flat-head, nylon-coated (2) Black 0.167 Nm (1.7 kgfcm) 3 M2 × 3.5 mm, flat-head, nylon-coated (1) Black 0.167 Nm (1.7 kgfcm) 92 ThinkPad T61 and T61p (14.
T able 29. Removal steps of base cover (continued) 4 5 4 a Step Screw (quantity) Color T orque 4 M2 × 5 mm, flat-head, nylon-coated (2) Black 0.
T able 29. Removal steps of base cover (continued) Attention: Before step 6 , be sur e that the Ultrabay Slim device eject lever has not popped out. It must be housed in its position as shown in the figure a . a 6 7 94 ThinkPad T61 and T61p (14.
T able 30. Installation of the PC Card slot bezel When installing the PC Card slot bezel assembly , do as follows: For PC Card/ExpressCard slot bezel assembly 1 2 3 4 For PC Card/Smart Card slot bezel assembly 1 2 ThinkPad T61 and T61p (14.
Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover , you need to apply the following labels: a.
1 170 Speaker assembly For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1020 Ultrabay Slim device” on page 63 v “1030 Hard disk drive (HDD) cover , HDD, and HDD r.
1 180 USB sub card with cable For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1020 Ultrabay Slim device” on page 63 v “1030 Hard disk drive (HDD) cover , HDD, an.
T able 31. Removal steps of USB sub card with cable (continued) 5 3 4 5 2 In step 4 , remove the security hole bracket in the dir ection of the arrow . Step Screw (quantity) Color T orque 3 M2 × 3.5 mm, flat-head, nylon-coated (1) Black 0.
1 190 Structure frame For access, remove these FRUs, in or der: v “1010 Battery pack” on page 62 v “1020 Ultrabay Slim device” on page 63 v “1030 Hard disk drive (HDD) cover , HDD, and HDD r.
T able 32. Removal steps of structure frame (continued) Remove the ac power jack cable a and the modem cable b . 2 4 3 4 5 a b 6 When installing: Make sure the connectors ar e attached firmly , and that the cables are r outed as in the figure above.
T able 32. Removal steps of structure frame (continued) Remove the CPU support plate. 7 8 Step Screw (quantity) Color T orque 7 M2 × 5 mm, flat-head, nylon-coated (1) Black 0.167 Nm (1.7 kgfcm) 9 9 9 9 11 11 10 10 a Step Screw (quantity) Color T orque 9 M2 × 3.
T able 32. Removal steps of structure frame (continued) Remove the system board and the PC Car d/ExpressCard slots assembly fr om the structur e frame together . 12 13 When attaching the system board to the frame, do as follows: T able 33. Installation of the system board 1.
1200 System board and PC Card/ExpressCard slots assembly Important notices for handling the system board: When handling the system board, bear the following in mind. v The system boar d has an accelerometer , which can be broken by applying several thousands of G-forces.
T able 34. Removal steps of system board and PC Card/ExpressCard slots assembly 1 1 Step Screw (quantity) Color T orque 1 M2 × 3 mm, flat-head, nylon-coated (2) Silver 0.167 Nm (1.7 kgfcm) Following components soldered on the top side of the system boar d are extremely sensitive.
T able 34. Removal steps of system board and PC Card/ExpressCard slots assembly (continued) T urn the system board over , and then disconnect the PC Card/Expr essCard slots assembly a from the system boar d. 2 a When installing: Make sure that the connector of the PC Car d/Express Card slot assembly is attached to the system board firmly .
2010 LCD cover kit For access, remove this FRU: v “1010 Battery pack” on page 62 T able 35. Removal steps of LCD cover kit 2 2 1 1 1 Step Screw cap Screw (quantity) Color T orque 1 M2.5 × 7 mm, bind-head, nylon-coated (3) Black 0.392 Nm (4 kgfcm) 2 M2.
T able 35. Removal steps of LCD cover kit (continued) Detach the left and right rear edges of the LCD r ear cover 5 , and remove the cover in the direction of arr ow 6 as shown in this figure. 5 6 5 Detach the latches on the top, left, and right edge of the LCD front bezel in the direction of arr ow 7 as shown in this figure.
T able 35. Removal steps of LCD cover kit (continued) Detach the latches on the front edge of the LCD fr ont bezel in the direction of arrow 8 as shown in this figur e. 8 8 8 8 8 T able 36. Installation of the LCD cover kit When installing: Attach the LCD cover kit as follows: 1.
T able 36. Installation of the LCD cover kit (continued) 2. Attach all the latches on the top, left, and right edges of the bezel. 3 3 3 3 3 3 3 3 3 3. Attach the LCD rear cover fr om the top end. 4 4. Attach the latches of the LCD rear cover firmly .
2020 Inverter card For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “2010 LCD cover kit” on page 107 T able 37. Removal steps of inverter card 3 1 1 2 Step Screw (quantity) Color T orque 1 M2 × 4 mm, flat-head, nylon-coated (2) Black 0.
2030 Bluetooth daughter card (BDC-2) For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “2010 LCD cover kit” on page 107 T able 38. Removal steps of BDC-2 1 2 Step Screw (quantity) Color T orque 1 M2 × 4 mm, flat-head, nylon-coated (1) Black 0.
2040 Antenna assembly For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1040 Palm rest or palm r est with fingerprint reader” on page 66 v “1060 Keyboard” on pag.
T able 39. Removal steps of antenna assembly (continued) 4 4 4 3 11 4 ThinkPad T61 and T61p (14.1-inch) Hardware Maintenance Manual.
2050 LCD magnesium frame assembly and hinge assembly For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1040 Palm rest or palm r est with fingerprint reader” on page .
T able 40. Removal steps of LCD magnesium frame assembly and hinge assembly (continued) 3 Step Screw (quantity) Color T orque 3 M2 × 3 mm, flat-head, nylon-coated (1) Silver 0.
T able 40. Removal steps of LCD magnesium frame assembly and hinge assembly (continued) Remove the hinge assembly in step 6 . 6 6 ThinkPad T61 and T61p (14.
2060 LCD panel and LCD cable For access, remove these FRUs in or der: v “1010 Battery pack” on page 62 v “1040 Palm rest or palm r est with fingerprint reader” on page 66 v “1060 Keyboard”.
Locations Front view 1 ThinkLight 2 Status indicators Note: For the description of each indicator , see “Status indicators” on page 50.
Rear view 1 Status indicators Note: For the description of each indicator , see “Status indicators” on page 50. 2 PC Card/Expr essCard slots eject buttons 3 PC Card/Expr essCard .
Parts list This section contains following lists of the service parts. v “Overall” on page 122 v “LCD FRUs” on page 146 v “Keyboard” on page 152 v “Miscellaneous parts” on page 153 v .
Overall 9 8 10 14 1 2 3 7 5 4 6 11 12 13 23 24 15 16 17 18 19 20 21 22 e d f a b c 122 ThinkPad T61 and T61p (14.1-inch) Hardwar e Maintenance Manual.
T able 42. Parts list—Overall No. FRU FRU no. RoHS ID CRU ID a - f See “Miscellaneous parts” on page 153. 1 LCD unit (see “LCD FRUs” on page 146.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 3 Palm rest assembly with fingerprint r eader , with IBM logo v 8889-CTO, CTO, 22x, 23x, 26x, 2Ax, 2Cx, 2Px, 2Qx, 2Ux, 2Wx, 3.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 6 ThinkPad 1 1a/b/g W ireless LAN Mini PCI Expr ess Adapter v 8889-CTO, 24x v 8890-CTO, 24x v 8891-CTO v 8892-CTO v 8893-CTO .
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 6 ThinkPad 1 1a/b/g/n W ireless LAN Mini-PCI Expr ess Adapter v 8889-CTO v 8890-CTO v 8891-CTO v 8892-CTO v 8893-CTO v 8894-C.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 6 Intel W ireless W iFi Link 4965AGN (1 1n disabled) v 8889-CTO, 26x, 6Lx, 6Mx, 6Nx, 6Px, 6Wx, A4x, A5x, A7x, A8x, ADx, AHx, .
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 10 S ATA hard disk drive, 60 GB, 9.5 mm, 5,400 rpm v 8889-CTO, 5Xx, 5Yx, 5Zx v 8890-CTO v 8891-CTO v 8892-CTO, 2Xx v 8893-CTO.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 10 S ATA hard disk drive, 120 GB, 9.5 mm, 5,400 rpm v 8889-CTO, 24x, 28x, 2Ax, 2Bx, 2Cx, 2Dx, 2Fx, 2Hx, 2Mx, 2Px, 2Qx, 2Ux, 3.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 10 S ATA hard disk drive, 160 GB (FDE), 9.5 mm, 5,400 rpm, Seagate v 8889-CTO, 36x, 37x, 39x, 6Ax, 6Dx, 6Ex, 6Fx, 6Xx, A9x v .
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 10 S ATA hard disk drive, 100 GB, 9.5 mm, 7,200 rpm v 8889-CTO, 2Nx, 35x, 3Dx, 3Fx, 3Hx, 5Wx, 6Gx, 6Hx, 6Jx, 6Kx v 8890-CTO v.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 12 Battery pack, Li-ion (6 cell) v 8889-CTO, 26x, 28x, 2Ax, 2Bx, 2Cx, 2Dx, 2Fx, 2Hx, 2Mx, 2Nx, 2Px, 3Qx, 2Qx, 2Ux, 2Wx, 2Yx, .
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 13 DVD drive, 9.5 mm v 8889-CTO, 5Xx, 5Yx, 5Zx v 8890-CTO v 8891-CTO v 8892-CTO v 8893-CTO v 8894-CTO v 8895-CTO, 2Zx, 6Fx v .
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 13 DVD-RAM/R W drive, 9.5 mm v 8889-CTO, 22x, 23x, 24x, 28x, 2Ax, 2Bx, 2Cx, 2Dx, 2Fx, 2Hx, 2Mx, 2Nx, 2Qx, 2Ux, 2Wx, 32x, 35x,.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 15 Base cover assembly for 8892 W orld-wide v 8892-CTO, xxU, xxF , xxL, xxP , xxS, xxY , xxG, xxM, xxA, xxQ, xxB, xxH, xxC, x.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 15 Base cover assembly for 8900 W orld-wide v 8900-CTO 42W3674 R N T aiwan v 8900-CTO 42W3688 R N 15 Base cover assembly for .
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 16 1-GB DDR2-667 SDRAM SO-DIMM (PC2-5300) card v 8889-CTO, 22x, 23x, 24x, 26x, 28x, 2Ax, 2Cx, 2Dx, 2Fx, 2Hx, 2Nx, 2Wx, 2Yx, 3.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 17 System board assembly , Intel Crestline GM with AMT v 8895-CTO, A2x, A5x, A6x, A7x, A8x, A9x v 8896-CTO, ACx, ADx v 8897-C.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 18 PC Card/Expr essCard slot v 8889-CTO, 22x, 23x, 24x, 28x, 2Ax, 2Bx, 2Cx, 2Dx, 2Fx, 2Hx, 2Nx, 2Px, 2Qx, 2Ux, 2Wx, 2Yx, 32x,.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 19 CPU assembly , Intel Core 2 Duo processor T7100 (1.8 GHz) v 8889-CTO, 3Qx, 3Rx, 3Sx, 3Vx, 3Wx, 5Xx, 5Yx, 5Zx, 69x, 6Bx v 8.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 19 CPU assembly , Intel Core 2 Duo processor T7500 (2.2 GHz) v 8889-CTO, 22x, 23x, 2Cx, 2Dx, 2Fx, 2Ux, 2Wx, 32x, 3Hx, 6Ex, 6G.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 19 CPU assembly , Intel Core 2 Duo processor T7700 (2.4 GHz) G-0 Step v 8889-CTO, 35x, 36x, 37x, 39x, 3Cx, 3Dx, 3Ex, 3Fx, 5Wx.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 19 CPU assembly , Intel Core 2 Duo processor T8300 (2.4 GHz) v 8889-CTO, A7x, A9x, AEx, AHx, AJx v 8890-CTO, AQx v 8891-CTO v.
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 21 Thermal device and fan (integrate) v 8895-all v 8896-all v 8897-all v 8898-all v 8899-all v 8900-all v 8938-all 42W2821 R .
T able 42. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 22 Intel T urbo Memory , 1GB v 8889-CTO, 3Fx, 6Gx, 6Hx, 6Px, 6Qx, 6Rx, 6Sx, 72x, A8x, A9x, ACx, ADx, AEx, AFx, AKx, ALx, AMx,.
LCD FRUs In ThinkPad T61 and T61p (14.1-inch), there ar e following types of LCDs. v “14.1-inch XGA TFT” on page 147 v “14.1-inch SXGA+ TFT” on page 149 146 ThinkPad T61 and T61p (14.
14.1-inch XGA TFT T able 43. Parts list—14.1-inch XGA TFT No. FRU FRU no. RoHS ID CRU ID 1 LCD cover kit with IBM logo v 8889-CTO, 3Rx, 3Sx, 3Ux, 3Vx, 3Wx, 6Lx, 6Mx, 6Px (for xxB, xxH, xxC, xxV) v 8.
T able 43. Parts list—14.1-inch XGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 2 Antenna assembly (wireless LAN and wir eless W AN) v 8889-CTO, 3Nx, 3Px, 3Qx, 3Rx, 3Sx, 3Tx, 3Ux, 3Vx, 3Wx, 69x, .
T able 43. Parts list—14.1-inch XGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 8 LCD panel, 14.1-in. XGA v 8889-CTO, 3Mx, 3Nx, 3Px, 3Qx, 3Rx, 3Sx, 3Tx, 3Ux, 3Vx, 3Wx, 5Xx, 5Yx, 69x, 6Ax, 6Bx, 6C.
T able 44. Parts list—14.1-inch SXGA+ TFT (continued) No. FRU FRU no. RoHS ID CRU ID 1 LCD cover kit with ThinkPad logo (T series) v 8889-CTO, 24x, 26x, 28x, 2Bx, 2Dx, 2Fx, 2Hx, 2Mx, 2Nx, 2Yx, 32x, .
T able 44. Parts list—14.1-inch SXGA+ TFT (continued) No. FRU FRU no. RoHS ID CRU ID 5 Hinges, Kato 42W3653 R N Hinges, Reel 42W3654 R N 6 Inverter card, Foxconn 41W1478 R N Inverter card, TW Sumida.
Keyboard Language P/N (ALPS) P/N (Chicony) P/N (NMB) RoHS ID CRU ID Arabic 42T3212 42T3276 42T3146 R ** Belgian 42T3213 42T3277 42T3147 Brazilian Portuguese 42T3240 42T3304 42T3174 Canadian French (05.
Miscellaneous parts T able 45. Parts list—Miscellaneous parts FRU P/N RoHS ID CRU ID Screw kit (including nylon-coated scr ews): v M2 × 4 mm (black), bind head (17) v M2 × 2.7 mm (black), flat head (2) v M2 × 2.8 mm (silver), flat head (14) v M2 × 3 mm (silver), small head (15) v M2 × 3.
T able 45. Parts list—Miscellaneous parts (continued) FRU P/N RoHS ID CRU ID System board miscellaneous parts: v Insulation sheet, docking v Insulation sheet, front louver v Insulation sheet, PC Car.
Power cords A ThinkPad power cord for a specific country or r egion is usually available only in that country or region: T able 47. Parts list—2-pin power cords Region P/N (Longwell) P/N (V olex) RoHS ID CRU ID Argentina v models -CTO, xxY 42T5020 42T5105 R * Brazil v models -CTO, xxP 42T5180 42T5183 Canada, U.
Recovery discs Windows XP Professional CDs W indows XP Professional is pr einstalled as the operating system in the following models: v 8889-CTO, 28x, 2Fx, 2Hx, 32x, 36x v 8890-CTO v 8891-CTO, 2Gx, 3A.
T able 49. Parts list—Windows XP Professional recovery CDs Language P/N RoHS ID CRU ID Arabic 43T8176 R * Brazilian Portuguese 43T8165 Czech 43T8172 Danish 43T8170 Dutch 43T8171 Finnish 43T8173 Fren.
Windows V ista Home Basic (32 bit) DVDs W indows V ista Home Basic (32 bit) is pr einstalled as the operating system in the following models: v 8889-CTO v 8890-CTO v 8891-CTO, 2Sx v 8892-CTO v 8893-CTO v 8894-CTO v 8895-CTO v 8896-CTO v 8897-CTO, 29x, 2Ax v 8898-CTO v 8899-CTO v 8900-CTO v 8938-CTO, 23x, 3Cx v 8939-CTO T able 50.
Windows V ista Home Premium (32 bit) DVDs W indows V ista Home Pr emium (32 bit) is preinstalled as the operating system in the following models: v 8889-CTO v 8890-CTO v 8891-CTO, 2Sx v 8892-CTO v 889.
T able 51. Parts list—Windows Vista Home Premium (32 bit) DVDs Language P/N RoHS ID CRU ID Brazilian Portuguese 44Y2496 R * Czech 44Y2503 Danish 44Y2501 Dutch 44Y2502 Finnish 44Y2504 French 44Y2493 .
Windows V ista Business (32 bit) DVDs W indows V ista Business (32 bit) is pr einstalled as the operating system in the following models: v 8889-CTO, 24x, 26x, 2Nx, 2Qx, 2Ux, 3Hx, 3Qx, 3Rx, 3Vx, 3Wx, .
T able 52. Parts list—Windows Vista Business (32 bit) DVDs Language P/N RoHS ID CRU ID Brazilian Portuguese 44Y2467 R * Czech 44Y2474 Danish 44Y2472 Dutch 44Y2473 Finnish 44Y2475 French 44Y2464 Germ.
Windows V ista Business (64 bit) DVDs W indows V ista Business (64 bit) is pr einstalled as the operating system in the following models: v 8889-CTO, 22x, 2Ax, 2Bx, 2Cx, 2Dx, 2Mx, 2Px, 2Wx, 2Yx, 3Ex, .
Windows V ista Ultimate (32 bit) DVDs W indows V ista Ultimate (32 bit) is pr einstalled as the operating system in the following models: v 8889-CTO, 23x, 35x, 37x, 39x, 3Cx, 3Dx, 3Fx, 6Jx, 6Kx, 6Tx, .
Common service tools T able 55. Parts list—Common service tools T ool P/N Screwdriver kit 95F3598 1/4 ″ drive spinner handle 1650840 1/4 ″ Sq. to 1/4 ″ hex torx adapter 93F2838 TR7-TR-10 tamper resistant torx bits 00P6967 Removal tool antenna RF connector 08K7159 USB 2.
166 ThinkPad T61 and T61p (14.1-inch) Hardwar e Maintenance Manual.
Notices Lenovo may not offer the pr oducts, services, or features discussed in this document in all countries. Consult your local L enovo repr esentative for information on the pr oducts and services curr ently available in your area.
T rademarks 168 ThinkPad T61 and T61p (14.1-inch) Hardwar e Maintenance Manual The following terms ar e trademarks of L enovo in the United Stat es, other countries or both: Lenovo Active Pr otection .
.
(1P) P/N: 42X3545_04 *42X3545_04*.
Ein wichtiger Punkt beim Kauf des Geräts Lenovo T61p (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Lenovo T61p noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Lenovo T61p - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Lenovo T61p reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Lenovo T61p erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Lenovo T61p besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Lenovo T61p verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Lenovo T61p. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Lenovo T61p gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
