Benutzeranleitung / Produktwartung 9690 des Produzenten Lenovo
Zur Seite of 68
Leno v o 3000 User Guide Machine T ypes 9680, 9681, 9682, 9683, 9684, 9685, 9686, 9687, 9688, 9689, 9690, 9691 7812, 7813, 7814, 7815, 7816, 7817, 7818, 7819,.
.
Le n o v o 3 000.
Note Before using this information and the pr oduct it supports, be sure to read the Safety and W arranty Guide that came with this product and Appendix B, “Notices,” on page 53. Second Edition (July 2007) © Copyright Lenovo 2005, 2007. Portions © Copyright International Business Machines Corporation 2005.
Contents Introduction . . . . . . . . . . . . .v Chapter 1. Important safety information 1 Chapter 2. Arranging your workspace . .3 Comfort . . . . . . . . . . . . . . . .3 Glare and lighting . . . . . . . . . . . .3 Air circulation . . . . . . . . . .
iv User Guide.
Introduction This User Guide contains the following information: v Chapter 1, “Important safety information,” on page 1 provides information about where to find safety information for this pr oduct.
vi User Guide.
Chapter 1. Important safety information CAUTION: Before using this manual, it is important that you read and understand all the related safety information for this product. Refer to the Safety and Warranty Guide that you received with this product for the latest safety information.
2 User Guide.
Chapter 2. Arranging your workspace To get the most fr om your computer , arrange both the equipment you use and your work area to suit your needs and the kind of work you do. Y our comfort is of foremost importance, but light sour ces, air circulation, and the location of electrical outlets can also affect the way you arrange your workspace.
Where it is impossible to avoid r eflections or to adjust the lighting, an antiglare filter placed over the screen might be helpful. However , these filters might affect the clarity of the image on the screen; try them only after you have exhausted other methods of reducing glar e.
Chapter 3. Setting up your computer Read and understand the Safety and Warranty Guide befor e you set up your computer . Reading and understanding the safety information reduces the risk of personal injury and or damage to your product. Set up your computer in the best possible work area that suits your needs and habits.
4. Carefully , position the computer with the air vents facing upward so that the computer sits on the vertical stand. Connecting your computer Use the following information when connecting your computer . Look for the small connector icons on the back of your computer .
v If the voltage supply range in your local country or region is 200–240 V ac, set the switch to 230 V. 115 2. Connect the keyboard cable to the appropriate keyboar d connector , either the standard keyboar d connector 1 or the Universal Serial Bus (USB) connector 2 .
4. Connect the monitor cable to the monitor connector on the computer . v If you have a V ideo Graphics Array (VGA) Standard monitor , connect the cable to the connector as shown. Note: If your model has two monitor connectors, be sur e to use the connector on the graphics adapter .
6. If you have audio devices, attach them using the following instructions. For more information about speakers, see steps 7 and 8. 1 Audio line-in This connector receives audio signals fr om an external audio device, such as a stereo system.
9. Connect any additional devices that you have. Y our computer might not have all connectors that are shown. 1394 1394 1 USB Use this connector to attach a device that requir es a USB connection, such as a keyboard, mouse, scanner , printer , or personal digital assistant (PDA).
T urning on computer power T urn on the monitor and other external devices first, and then turn on the computer . When the power-on self-test (POST) is finished, the logo window closes. If your computer has preinstalled softwar e, the software installation pr ogram starts.
Updating your operating system Microsoft makes updates available for various operating systems thr ough the Microsoft W indows Update We b site. The We b site automatically determines what W indows updates are available for your specific computer and lists those updates only .
Features This section provides an overview of the computer featur es and preinstalled software. System information The following information covers a variety of models. For information for your specific model, use the Setup Utility . See Chapter 5, “Using the Setup Utility,” on page 21.
v 10/100/1000 Mbps integrated Ethernet controller (some models) v Peripheral Component Interconnect (PCI) V .90 Data/Fax modem (some models) System management features v Preboot Execution Environment .
v User and administrator passwords for BIOS access v Support for the addition of an integrated cable lock (Kensington lock) v Startup sequence control v Startup without diskette drive, keyboard, or mo.
Specifications This section lists the physical specifications for machine types 7816, 7817, 7818, 7819, 9686, 9687, 9688, 9689, 9690, and 9691. Dimensions Height: 410 mm (16.14 in.) W idth: 175 mm (6.9 in.) Depth: 424 mm (16.7 in.) W eight Minimum configuration: 8.
This section lists the physical specifications for machine types 7812, 7813, 7814, 7815, 9680, 9681, 9682, 9683, 9684, and 9685. Dimensions W idth: 331 mm (13.03 in.) Height: 105 mm (4.13 in.) Depth: 405 mm (15.94 in.) W eight Minimum configuration as shipped: 8.
18 User Guide.
Chapter 4. Software overview The computer is manufactured with a pr eloaded operating system and several preloaded applications. The operating systems available are: v W indows V ista v W indows XP Software provided with your Windows operating system This section describes the W indows applications included with this product.
20 User Guide.
Chapter 5. Using the Setup Utility The Setup Utility program is used to view and change the configuration settings of your computer , regar dless of which operating system you are using. However , the operating-system settings might override any similar settings in the Setup Utility program.
v Contain at least one alphabetic character , one numeric character , and one symbol v Contain at least one of the following symbols: , . / ` ; ' [] v Yo u can also use the space bar v Setup Util.
3. Select Security Profile by Device . 4. Select the desired devices and settings and press Enter . 5. Return to the Setup Utility program menu and select Exit and then Save Settings or Save and exit the Setup Utility . Note: If you do not want to save the settings, select Exit the Setup Utility without saving .
Advanced settings On some computer models the Advanced settings menu includes a setting to Enable/Disable HyperThreading. This featur e works only with HyperThreading-awar e operating systems, such as Microsoft W indows XP . The default setting for HyperThreading is Enabled.
Chapter 6. Updating system programs This chapter contains information about updating POST/BIOS and how to recover from a POST/BIOS update failur e. Using system programs System programs ar e the basic layer of software built into your computer .
7. Follow the instructions on the screen to complete the update. Updating (flashing) BIOS from your operating system Note: Due to the constant impr ovements made to the We b site, We b page content (including the links refer enced in the following procedur e) is subject to change.
Chapter 7. T roubleshooting and diagnostics This chapter describes some basic troubleshooting and diagnostic pr ograms. If your computer problem is not described her e, see Chapter 9, “Getting information, help, and service,” on page 41 for additional troubleshooting r esources.
Symptom Action The USB Keyboard does not work. V erify that: v The computer is turned on. v The keyboard is securely connected to a USB connector on the front or r ear of the computer . v No keys are stuck. If you cannot correct the pr oblem, have the computer serviced.
display . Yo u will need to have all problem-related log files available when you speak to a Lenovo technical support repr esentative. PC-Doctor for Windows PC-Doctor for W indows is a diagnostic program that works through the W indows operating system.
4. When you hear beeps or see a logo screen, stop pressing the F1 1 key . The Rescue and Recovery workspace opens. Note: For some models, pr ess the Esc key to enter Rescue and Recovery . 5. From the Rescue and Recovery workspace, select Create diagnostic disks .
PC-Doctor for Windows PE Depending upon your machine type and model, you either have PC-Doctor for DOS or PC-Doctor for W indows PE on your Lenovo computer . The PC-Doctor for W indows PE diagnostic program is part of the Rescue and Recovery workspace.
Note: The following illustration might be slightly dif ferent fr om your mouse. 1 Retainer ring 2 Ball 3 Plastic rollers 4 Ball cage To clean a mouse with a ball, follow the instructions below: 1. T urn off your computer . 2. Disconnect the mouse cable from the computer .
Chapter 8. Recovering software This chapter will help you become familiar with recovery solutions pr ovided by Lenovo. This chapter explains how and when to use the following recovery methods: v Creat.
v W indows V ista: Use Product Recovery discs to restor e your computer to the original factory contents only . When using Product Recovery discs on W indows XP , you ar e given the option to enter the Rescue and Recovery workspace and choose from a variety of r ecovery operations.
v On a second hard disk installed in your computer v On an externally attached USB hard disk v On a network drive v On recordable CDs or DVDs (a r ecordable CD or DVD drive is r equired for this optio.
same state as it was when originally shipped from the factory . If you have multiple partitions on your hard disk, you have the option to r estore the factory contents to the C: partition and leave the other partitions intact.
Creating and using rescue media Rescue media such as a CD or USB hard disk drive enables you to r ecover from failures that pr event you from gaining access to the Rescue and Recovery workspace on your hard disk. Note: The r ecovery operations you can perform using rescue media vary depending on the operating system.
2. Using an Internet browser , go to the following We b address: http://www .lenovo.com/think/support/site.wss/document.do?lndocid=MIGR-54483 3. Insert a diskette into diskette drive A. Information on the diskette will be erased and the diskette will be formatted appropriately .
v If the device subfolder contains a file with an .INF extension, you can use the Add New Hardwar e program (located in the W indows Control Panel) to reinstall the device driver .
Recovery CDs, you might not have the rescue device, CD drive, DVD drive, or USB hard disk drive defined as a startup device in the BIOS startup sequence.
Chapter 9. Getting information, help, and service This chapter contains information about help, service, and technical assistance for products manufactur ed by Lenovo. Information resources This section describes how to access useful resour ces relating to your computing needs.
To access the Lenovo Car e Productivity Center program, open the Start menu fr om the W indows desktop, select All Programs , select Lenovo Care , and click Productivity Center .
Using the documentation and diagnostic programs If you experience a problem with your computer , see Chapter 7, “T roubleshooting and diagnostics,” on page 27. For information on additional resour ces to help you troubleshoot your computer pr oblem, see “Information resour ces” on page 41.
v Serial numbers of your hardware pr oducts v Description of the problem v Exact wording of any error messages v Hardware and softwar e configuration information Using other services If you travel wit.
Appendix A. Manual modem commands The following section lists commands for manually programming your modem. Commands are accepted by the modem while it is in Command Mode. Y our modem is automatically in Command Mode until you dial a number and establish a connection.
Command Function H1 Force modem of f-hook (make busy) Note: H1 command is not supported for Italy I_ I0 Display product-identification code I1 Factory ROM checksum test I2 Internal memory test I3 Firm.
Extended AT commands Command Function &C_ &C0 Force Carrier Detect Signal High (ON) &C1 T urn on CD when remote carrier is present &D_ &D0 Modem ignores the DTR signal &D1 Mode.
Command Function &V1 Display Last Connection Statistics &W_ &W0 Stores the active pr ofile as Profile 0 &W1 Stores the active pr ofile as Profile 1 %E_ %E0 Disable auto-retrain %E1 Ena.
Fax Class 1 commands +F AE=n Data/Fax Auto Answer +FCLASS=n Service Class +FRH=n Receive data with HDLC framing +FRM=n Receive data +FRS=n Receive silence +FTH=n T ransmit data with HDLC framing +FTM=n T ransmit data +FTS=n Stop transmission and wait Fax Class 2 commands +FCLASS=n Services class.
+FPHCTO Phase C time out. +FPOLL Indicates polling request. +FPTS: Page transfer status. +FPTS= Page transfer status. +FREV? Identify revision. +FSPT Enable polling.
Attention Switzerland User: If your Swisscom phone line does not have T axsignal switched OFF , modem function may be impaired. The impairment may be r esolved by a filter with the following specifications: T elekom PTT SCR-BE T aximpulssperrfilter-12kHz PTT Art.
52 User Guide.
Appendix B. Notices Lenovo may not offer the pr oducts, services, or features discussed in this document in all countries. Consult your local Lenovo repr esentative for information on the products and services curr ently available in your area.
vary significantly . Some measurements may have been made on development-level systems and there is no guarantee that these measur ements will be the same on generally available systems. Furthermore, some measur ements may have been estimated through extrapolation.
Index A access help 42 administration, password 22 advanced settings 24 antivirus software, updating 12 arranging workspace 3 AT commands basic 45 extended 47 audio subsystem 13 B backup and recovery .
internal drives 13 introduction v L Lenovo Care pr oductivity center 41 Lenovo web site 42 lighting, glare 3 M manual modem commands 45 media, creating and using r escue 37 MNP/V .42/V .42bis/V .44, commands 48 modem commands basic AT 45 Extended AT 47 fax class 1 49 fax class 2 49 manual 45 MNP/V .
U updating (flashing) BIOS 25 antivirus software 12 operating system 12 system programs 25 updating (flashing) BIOS 26 user , password 22 using diagnostic programs 43 documentation 43 other services 4.
58 User Guide.
.
Part Number: 43C3103 Printed in USA (1P) P/N: 43C3103.
Ein wichtiger Punkt beim Kauf des Geräts Lenovo 9690 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Lenovo 9690 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Lenovo 9690 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Lenovo 9690 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Lenovo 9690 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Lenovo 9690 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Lenovo 9690 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Lenovo 9690. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Lenovo 9690 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
