Benutzeranleitung / Produktwartung 78-10169-02 des Produzenten APC
Zur Seite of 28
CHAPTER 2-1 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 2 Monitoring the System This chapter explains ho w to monitor the Cisco ICS 7750.
Chapter 2 Monitoring the System Alarms 2-2 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Alarms This section describes alarms, which indicate problems on the Cisco ICS 7750 or on systems with which it is communicating.
2-3 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Chapter 2 Monitoring the System Logging Alarm Levels The system has the following tw o alarm lev els: • Major alarm (a.
Chapter 2 Monitoring the System Logging 2-4 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Handling Log Messages with ICS System Manager ICS System Manager provides se veral options for handling the log messages directed to it.
2-5 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Chapter 2 Monitoring the System Logging T able 2-1 Log Message Elements Element Example Format Description Receiv ed date and time 1999 Nov 21 11:55:00 yyyy mmm dd hh:mm:ss The date and time when the message was recei ved.
Chapter 2 Monitoring the System Logging 2-6 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Facilities T able 2-2 describes the facility types supported by log messages. Severity Levels T able 2-3 describes log message se verity lev els.
2-7 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Chapter 2 Monitoring the System Logging Note Not all messages indicate problems. Some messages are informational. Others may help diagnose problems with communications lines, internal hardware, or system software.
Chapter 2 Monitoring the System Logging 2-8 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Default Log Configuration System IOS components (ASI cards, MRP cards, and the SSP card) ship with the default logging conf iguration shown in T able 2-4 .
2-9 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Chapter 2 Monitoring the System Logging • syslog path is the path to syslog.conf • myf ile.log is the name of your log f ile The syslog daemon (syslogd) sends messages at the lev el specif ied in syslog.
Chapter 2 Monitoring the System SNMP Basics 2-10 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 SNMP Basics The Simple Network Management Protocol (SNMP) facilitates the e xchange of management information among network de vices.
2-11 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Chapter 2 Monitoring the System SNMP Basics • An SNMP management application, together with the computer it runs on, is called a network management system (NMS). An NMS executes applications that monitor and control managed devices.
Chapter 2 Monitoring the System SNMP Basics 2-12 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 The following system components, though not SNMP-managed de vices, recei ve.
2-13 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Chapter 2 Monitoring the System SNMP Basics On the Cisco ICS 7750, the ICS System Manager software (the NMS) typically sends SNMP requests to a single IP address to access the SNMP MIBs of any system component.
Chapter 2 Monitoring the System SNMP Basics 2-14 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Supported MIBs The Cisco ICS 7750 supports the following MIBs: • CISCO-C2900-MIB—Supports the SSP card.
2-15 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Chapter 2 Monitoring the System SNMP Basics Cisco ICS 7750 Traps Cisco ICS 7750 ASI cards, MRP cards, and the SSP card can generate traps such as the following: • coldStart—Indicates power -up reset of a card.
Chapter 2 Monitoring the System Monitoring with ICS System Manager 2-16 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 • Number represents the target physical slot number (slots 1 through 8) of the SNMP request.
2-17 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Chapter 2 Monitoring the System Monitoring with CiscoWorks2000 Monitoring with CiscoWorks2000 CiscoW orks2000 uses SNMP to monitor and control system de vices. Y ou can integrate CiscoW orks2000 applications with other NMSs, such as HP OpenV ie w.
Chapter 2 Monitoring the System Monitoring with Cisco IOS Software 2-18 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 SNMP and the CiscoWorks2000 Interface Using SNMP , CiscoW orks2000 retrie ves CDP information by polling Cisco CallManager .
2-19 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Chapter 2 Monitoring the System Monitoring with Cisco IOS Software Evaluating Reachability and Response Times Polling remote parts of the network enables you to test reachability and measure response times.
Chapter 2 Monitoring the System Monitoring with Cisco IOS Software 2-20 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 W ith in-band monitoring, network management data is sent ov er the same paths as user traff ic.
2-21 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Chapter 2 Monitoring the System Monitoring a UPS Searching and Filtering Output of show Commands In Cisco IOS software Release 12.0(1)T or later , you can search and f ilter the output for show commands.
Chapter 2 Monitoring the System Monitoring a UPS 2-22 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Step 2 If any of the follo wing de vices are not turned on, power them on as follo ws: • UPS—Press the T est button on the UPS front panel.
2-23 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Chapter 2 Monitoring the System Monitoring a UPS Step 6 Install the UPS: installups Step 7 Start FmmServer: net start FmmServer Step 8 Go to “V erifying That the Cisco ICS 7750 Can Communicate with the UPS” on page 2-26 .
Chapter 2 Monitoring the System Monitoring a UPS 2-24 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 While the system is attempting to communicate with the UPS, the f irst screen of the SNMP/W eb Card Management W izard continues to be displayed (this process might take se veral minutes).
2-25 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Chapter 2 Monitoring the System Monitoring a UPS Step 17 In the left pane of the browser windo w , choose Smart-UPS 1400 RM XL > Po werChute . Step 18 In the Add Client IP Address f ield, enter the IP address of the SPE running System Manager .
Chapter 2 Monitoring the System Monitoring a UPS 2-26 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Step 32 Log in as an administrator (userID administrator ), and enter your passw ord (the default is c hangeme ).
2-27 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0 Chapter 2 Monitoring the System Monitoring a UPS Step 5 V erify that the Cisco ICS 7750 can communicate with the UPS: fmmcli getchassisinfo | more Information similar to the following will be displayed: UPS status = AC Battery Level = <non-zero value> Batt.
Chapter 2 Monitoring the System Monitoring a UPS 2-28 Cisco ICS 7750 Administration and Troubleshooting Guide 78-10169-02 Rev. B0.
Ein wichtiger Punkt beim Kauf des Geräts APC 78-10169-02 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie APC 78-10169-02 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für APC 78-10169-02 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von APC 78-10169-02 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über APC 78-10169-02 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon APC 78-10169-02 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von APC 78-10169-02 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit APC 78-10169-02. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei APC 78-10169-02 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
