Benutzeranleitung / Produktwartung REFERENCE 64 des Produzenten Krell Industries
Zur Seite of 28
DIGITAL C==:D 0 .... ~ 0 ~ 0 ~ 0 REFERENCE 64 OWNER’S REFERENCE.
INTRODUCTION Thank you for your purchase of the Krell REFERENCE 64 Digital-to-Analog Processor and welcome to the Krell family of audio components. Krell is dedicated to the development of technologically advanced components for the reproduction of digitally recorded music.
INTRODUCTION This Owner’s Reference is designed to ensure the clear, trouble free installation of your REFERENCE 64 processor. Basic In- stallation, Operation and Quea{ion and Answer sections are provided. Should you have any questions or comments, please feel free to contact your authorized dealer or the KRELL staff for assistance.
TABLE OF CONTENTS 5 UNPACKING INSTRUCTIONS 6 ASSEMBLY INSTRUCTIONS 8 PLACEMENT 9 AC POWER CONSIDERATIONS 10 INPUT AND OUTPUT CONNECTIONS 19 PROCESSOR OPERATION 21 23 OPERATING INSTRUCTIONS QUESTIONS A.
UNPACKING 1. Open the box and remove the top layer of foam. The following items will now be visible: 1 REFERENCE 64 D/A PrOcessor 1 REFERENCE 64 Power Supply 1 Power Coupler 1 AC power cord 1 AT&T.
ASSEMBLY ASSEMBLY INSTRUCTIONS 1. The processor is designed to sit directly on top of its companion Power Supply. There is a mechanical interlock built into the front feet of the processor and the chassis cover of the Power Supply. The units are secured together in the rear by the power coupler.
ASSEMBLY 5. Locate the Processor/ Power Supply coupler assembly. This assembly can only be installed in one direction. The wider portion of the assembly with the mal~ connectors goes into the female connectors inthe center of the Power Supply. The female connec- tors on the power coupler go into the Processor’s male connectors.
PLACEMENT PLACEMENT Before you install the REFERENCE 64 into your system, we recommend that you follow these guidelines in choosing the location. This will facilitate a clean, trouble-free installation. 1. Although well shielded, the Processor should not be placed in close proximity to hum-sensitive components (ioe.
AC POWER AC POWER CONSIDERATIONS NOTE: While the REFERENCE 64 has superb regulation and does not require a dedicated AC Circuit, we strongly advise against connections through extension cords or multiple AC adaptors. High quality 15 amp grounded AC strips are acceptable.
CONNECTIONS INPUT AND OUTPUT CONNECTIONS CAUTION: When making connections to this component or any other, make sure the power amplifier is OFF and the preamplifier is in the MUTE or STANDBY mode. 1. Connect the AC Mains cord to the back of the REFERENCE 64 Power Supply and plug the power cord into th AC Mains.
CONNECTIONS 2. Connect the REFERENCE 64 analog output to the line level input of your preamplifier. The REFERENCE 64 is equipped with two analog output configu- rations" Single-ended via RCA connectors and Balanced via XLR connectors.
CONNECTIONS 3. The Left and Right channel RCA outputs are labeled on the back panel. The balanced outputs are not labeled. The balanced connector closest to the Left RCA output is the left channel output and the connector closest to the RCA right output is the right balanced output.
CONNECTIONS Typical System Connection Diagram. Digital components can connect to different inputs than are shown. LOUDSPEAKERS KSA AMPLIFIER PREAMPLIFIER ~R L OUTPUT REFERENCE 64 I DAT DECK I SATELLIT.
CONNECTIONS - TAPE MONITOR INPUTS AND OUTPUTS 1 Digital only tape output: Intended for CD-R or DAT 2 Digital monitor inputs using auto selection system 1 AT&T normally active, priority over coax input 1 coax selected by default system The digital signal at the tape output is the active digital input signal selected.
CONNECTIONS DIGITAL SOURCE TO D/A CONVERTER INTERLINK CONSID- ERATIONS Care should be taken in selectihg the type of cable used to link the digital source to your Processor, We suggest the AT&T wide-band width fiber optic cable be used. The AT&T format has a bandwidth of approximately 50 MegaBit.
CONNECTIONS ’"’ ’" ,’ TIMESYNC TimeSync is a proprietary interlink system that enables a Krell CD transport and REFERENCE 64 to link and run on the CD transport clock. The TimeSync system can only be had on specific Krell transports.
CONNECTIONS The operation of the Processor utilizing the TimeSync feature requires that the data input be selected first and then the be selected. The TimeSync and the DATA TimeSync input input selected must be from the same source.
CONNECTIONS HOW TO CONNECT AT&T CABLES: a. Remove the plastic cover from the outside of the AT&T transmitter (located on Transport) and receiver (located on Pro- cessor). b. Locate the slot on the top of the AT&T receptacle. c. Locate the key on the top of the AT&T cable.
OPERATION INPUT SELECT SWITCHING The REFERENCE 64 has multiple digital inputs. Each input has its own input switch and direct path to the digital Processor.
OPERATION SOURCE AND MONITOR SELECTION The SOURCE button directs the signal from the Processor input selection section to the DAC and analog output stage. The source button must be depressed to listen to the selected input through the main audio system.
OPERATION OPERATING INSTRUCTIONS 1. Select an input with the Input switch. Notice the Signal LED will illuminate when the digital ~ource is turned on and has linked with the Processor. Once this link is complete, the Processor is ready to pass a signal.
OPERATION NOTE: While your REFERENCE 64 will perform beautifully from the moment you turn it on, it requires a minimum warm-up period of 8 hours before it begins to show its strongest sonic qualities.
QUESTIONS AND ANSWERS Q. My CD player has both fiber optic and coaxial outputs. Which one should I use? A. Given a choice, we prefer the’AT&T optical link due to its ability to completely isolate the grounds between the digital source component and the Processor.
QUESTIONS AND ANSWERS Q. I am not getting any sound through the Processor. What could be wrong? A. Most likely there has been a simple mistake in installation. Check all connections IN and OUT of the Processor. Is the digital source component powered? Check all power connections.
QUESTIONS AND ANSWERS Q. While listening to my REFERENCE 64 1 experience occasional periods of silence through my speakers. Is my Processor malfunc- tioning? A. Drop outs are caused by two primary reasons. First, drop outs can be caused by data corruption.
SPECIFICATIONS FREQUENCY RESPONSE -. l dB at 4Hz & 20 KHz SIGNAL TO NOISE 100 dB A weighted DIGITAL-TO-ANALOG CONVERTER KRELL DAC Modules in custom THERMAL STABALIZATION SHIELD PROCESSING KRELL wr.
WARRANTY AND SERVICE WARRANTY AND SERVICE INFORMATION There are no user-serviceable ~arts inside the REFERENCE 64. The REFERENCE 64 has a limited warranty of five years parts and labor.
Krell Industries, Inc. ¯ 45 Connair Road, Orange CT 06477-3650 TEL 203-799-9954 FAX 203-891-2028 E-MAlL krell@krellonline, com WEBSITE http: //www.krellonline.
Ein wichtiger Punkt beim Kauf des Geräts Krell Industries REFERENCE 64 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Krell Industries REFERENCE 64 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Krell Industries REFERENCE 64 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Krell Industries REFERENCE 64 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Krell Industries REFERENCE 64 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Krell Industries REFERENCE 64 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Krell Industries REFERENCE 64 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Krell Industries REFERENCE 64. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Krell Industries REFERENCE 64 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
