Benutzeranleitung / Produktwartung Module 9 des Produzenten Kodak
Zur Seite of 30
©Eastman Kodak Company, 2006 Processing KODAK Color Print Films, Module 9 Process ECP-2E Specifications.
Process ECP-2E Specifications -0 Table of Contents FILMS AND PROCESS SEQ UENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 Designated Films . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Process ECP-2 E Specifications 9-1 9 PROCESS ECP-2E SPECIFICATIONS This module contains specifications describing contin uous machine processing of Koda k color pr int film s. The following modul es are also used in conjunction with Process ECP-2E. Pro cess EC P- 2E differ s from Process ECP-2D in that there is no first fix or sound applicatio n.
9-2 Process ECP-2E Specifications Process ECP-2E Steps Table 9-1 Persulfate Bleac h Sequence If a customer wishes to retain the firs t fix and the first fix wash from Process ECP-2D, th e sound application m ay still be sk ipped by threading the film dir ectly from the bleach wash into the second fix.
Process ECP-2E Specifications 9-3 PROCESSING MACH INE DESIGN AND CONSTRUCTION Machine Design The films intended for Process ECP-2E are processed in roll form in a continuous processi ng m achine. Film is transported through the various solution tanks, emul sion side out, on a series of spools.
9-4 Process ECP-2E Specifications Figure 9-3 Machine Schema tic fo r Proces s ECP-2E with Pe rsulfate Bleach Sequence F002_1280EC 40 180 40 20 40 40 40 60 10 Dark EXHAUST Normal Room Light EXHAUST Solution times are in seconds.
Process ECP-2E Specifications 9-5 Figure 9-4 Machine Schematic fo r Process ECP-2E with Ferricyanid e or “UL” Bleach Sequence F002_1281EC 60 40 10 40 60 40 180 40 DRYER FIXER WASH FINAL RINSE "UL" BLEACH or BLEACH FERRICYANIDE WASH Solution times are in seconds.
9-6 Process ECP-2E Specifications Construction Materials The construction materials recommended for the develop er, stop, fixer, and bleach solutions are listed in Table 9-2. All the bleaches are quite corrosive. The UL bleach is slightly more corrosive than ferricya nide bleach, but less corrosive than persulfate bleach.
Process ECP-2E Specifications 9-7 T able 9-2 Construction Materials for Process ECP-2E Solution Plastics (P olyvinyl Chlorid e or P olyolefin s) Titanium Hastelloy C Austeniti c Stainless Steel AISI T.
9-8 Process ECP-2E Specifications Filters Filters are used to remove any insoluble material in the for m of solids and tars from processing soluti ons and wash waters. If this material is no t removed, it can adhere t o the film being processed, machine tank walls, rollers, lines, etc.
Process ECP-2E Specifications 9-9 Machine Exhaust and Room Ventilation Systems Install local exhausts at specifi c locations on the processing machine and at specific work ar eas to provide for the safety and comfort of the laboratory personnel. Supplement local exhausts with a room ventilation system having a capacity of 10 air changes per hour.
9-10 Process ECP-2E Specifications T abl e 9-3 Mechanical Specifications for Pr ocess ECP-2E with PERSULF A TE Bleach Pro cess Steps KOD AK Formula T emperatu re * * Celsius tempe ratures are rou nded consist ent with process -control re qu irements. Fahrenheit temperatures are prima ry .
Process ECP-2E Specifications 9-11 Table 9-4 Mechan ical Specificati ons for Process ECP-2E wi th FERRICYANIDE Bleach Proc ess Steps KOD AK Formula T emperature * * Celsius temperature s ar e rounded cons istent with pr ocess-contr ol requireme nts. F ahr enheit temperatur es are pr imar y .
9-12 Process ECP-2E Specifications T able 9-5 Mechanical Specifications for Process ECP-2E with UL Bleach Proces s Step s KOD AK Formula T emperature * * Celsius tempe ratures are rou nded consist ent with process -control re qu irements. Fahrenheit temperatures are prima ry .
Process ECP-2E Specifications 9-13 UL Bleach Formulations Two UL Bleach formulations are available to fill various laboratory operating and env i ronmental needs. They are: • Ammonium UL or “UL Ho use” Bleach. This formulation contains the highest percentage of am monium ion which maximizes bleach act ivity.
9-14 Process ECP-2E Specifications Chemical Supplies and Substitutions Ferric nitrat e is su pp l ied in crystalline form as nonahydrat e or dissolved in w ater as a 35 or 45% solution.
Process ECP-2E Specifications 9-15 Wash-Water Flow Rates Adequate washing in conjunction with conservation of wash water is a matter of concer n for all processors.
9-16 Process ECP-2E Specifications T ab le 9-7 Mechanical Spec ifi c ati ons f or Re wash R W -1 Proces s Step s KO DAK Formul a Te m p e r a t u r e * * F ah renheit temp eratures are primar y . Celsi us temperatures are round ed consist ent with pr ocess-cont rol require ments.
Process ECP-2E Specifications 9-17 T ab l e 9- 8 SUPPLIERS OF PR OCESSING CHEMICALS Chemical o r T rade Name Formula or Chemical Name Some Suppliers Supplier Phone Number Acetic Acid, Glacial CH 3 COOH Fisher Scientifi c 800-766-7000 Brown Chemical Compan y 201-337-0900 Ammonium Bromide NH 4 Br Amer ibrome, Inc.
9-18 Process ECP-2E Specifications Sodium Phosphate , Monobasic , Anhydrous * NaH 2 PO 4 P echiney W orld T rade USA 800-736-7893 Degussa-Huls Co rporatio n 201-641 -6100 Sodium F errocy anide, Decah ydrate * Na 4 Fe ( C N) 6 •10H 2 O Degussa-Huls Corporation 201-641-6100 Filo Chemical, Inc.
Process ECP-2E Specifications 9-19 Solution Mixing 1. Use the f ollowing mixing pr act ices when preparing processing solution s with common mixing equi pment. Mix solutions in the order in which the solutions occur in the process sequence. This order will minimiz e mixing time and o xidation, wh ile provid i ng consistent re sul ts.
9-20 Process ECP-2E Specifications Formulas and Analytical Specifica tions Maintain the fresh tank formula specifications exactly as given on the following pages. Any large deviat ion s from tank specifications, noted by chemical analysis , should be corrected im mediately by appropriate addit ions or cuts to the tank soluti on.
Process ECP-2E Specifications 9-21 Alternate Developer To process VISION Premier Color Print Film, the no rmal replenis her flow rate must be increased by 8% . If the footage processed is less than one ta nk turnover, no change of pH is required in the replenis her, but small adjustment could be necessa ry in the tank processor.
9-22 Process ECP-2E Specifications Accelerator To process VISION Premier Color Print Film, the accel erator replenisher flow rate may need to be increased. If only a small amount of footage is processed no change in the flow rate should be requir ed in the r ep leni sh er.
Process ECP-2E Specifications 9-23 Alternate Process Bleaches Note: • It is especially important to follow the Good mixi ng pract ices: when preparing this bleach. • Follow exactly the mix order given above. • Check the solution pH before starting the ferric nitrate a ddition.
9-24 Process ECP-2E Specifications Note: See Chemical Supplies a nd Substitutions for calculations regarding raw chemical concentrations and alternatives. • It is especially important to follow the Good mixi ng practi ces: when preparing this bleach.
Process ECP-2E Specifications 9-25 Fixer To be used with persulfate bleach (may al so be used with alternate process bleaches) To process a large quantity (more th an one tank turnover) of VISION P remier Color Print Film, the normal replenishment flow rate of the fix ma y need to be increased by up to 30%.
9-26 Process ECP-2E Specifications Alternate Process Fixer The Sodium Fixer is recommended as an alte rnate fixer for use only with a persulfate bleach.
Process ECP-2E Specifications 9-27 Storage of Solutions Do not use replenishe rs that ha ve been stored at normal room temperatures 21 to 24°C (70 to 75°F), lo nger than the times giv en in T able 9-9 . Storage t emperatures hi gher than 24°C (75°F) will decrease the stora ge lif e of the solutions .
Revision 7/06 Printed in U.S.A. Processing KODAK Color Pr int Films, Module 9 Process ECP-2E Specifications Processing KODAK Color Print Films, Module 9, Process ECP-2E Specifications MORE INFORMATION For more information on motion pi cture products, call or write to the Entertainment Imaging office nearest you.
Ein wichtiger Punkt beim Kauf des Geräts Kodak Module 9 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kodak Module 9 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kodak Module 9 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kodak Module 9 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kodak Module 9 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kodak Module 9 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kodak Module 9 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kodak Module 9. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kodak Module 9 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
