Benutzeranleitung / Produktwartung 600 des Produzenten Kenwood
Zur Seite of 64
COMP A CT HIFI SYSTEM NV -500 NV -600 This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area.
2 Preparation section MONITOR OUT REC OUT PLAY IN PLAY IN VIDEO 1 VIDEO 1 AUDIO REC OUT PLAY IN PLAY IN FM 75 Ω GND AM VIDEO 1 AC 110– 120V VIDEO 2 VIDEO 2 L R ANTENNA DIGITAL OUT OPTICAL AC 220.
3 Preparation section Contents Before applying power ............................................ 2 Safety precautions ........................................................... 2 IMPORT ANT SAFEGUARDS ..................................... 4 Special features .
4 Preparation section Caution : Read this page carefully to ensure safe operation. IMPORT ANT SAFEGUARDS 6. Temperature – The appliance may not function properly if used at extremely low, or freezing temperatures. The ideal ambient temperature is above +5°C (41°F).
5 Preparation section 1 3 . Lightning – For added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the appliance due to lightning and power-line surges.
6 Preparation section Special features Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately.
7 Preparation section System connection AM loop antenna connection The supplied antenna is f or indoor use. Place it as far as possible from the main sy stem, TV set, speaker cords and po wer cord, and set it to a direction whic h provides the best reception.
8 Preparation section Connection of the speaker system NV -600 + - + - MONITOR OUT REC OUT PLAY IN PLAY IN VIDEO 1 VIDEO AUDIO REC OUT FRONT SPEAKERS (6 - 16 Ω ) SUBWOOFER (4 - 16 Ω ) PLAY IN PLAY.
9 Preparation section Connection of Other Accessories (Commercially A vailable Parts) MONITOR OUT REC OUT PLAY IN PLAY IN VIDEO 1 VIDEO AUDIO REC OUT PLAY IN PLAY IN FM 75 Ω GND AM VIDEO 1 AC 110–.
10 Preparation section The space between radio channels has been set to the one that prevails in the area to which the system is shipped. However, if the current channel space setting does not match t.
11 Preparation section Controls and indicators CD CD 6 TAPE 2 3 MUTE TUNER TAPE MUTE ACTIVE TUNER/BAND STOP ON/STANDBY STANDBY/TIMER VOLUME STEREO 0 PHONES PUSH OPEN 1 1 2 3 4 5 6 7 8 9 0 ! POWER ON/S.
12 Preparation section Operation of remote control unit 3 Close the cover. 1 Remove the cover. 2 Insert batteries. ÷ Insert six R6 (“AA”-size) batteries following the polarity indications.
13 Preparation section IR ON/STANDBY CURSOR SET TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION HOME SET SET CURSOR CURSOR SET TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION T.
14 Preparation section CLOCK /LIGHT SET ¢ 4 –P.CALL– SET CLOCK 4 , ¢ SET STANDBY/TIMER CLOCK /LIGHT Clock adjustment Adjust the clock before setting the timer. After plugging the AC cord into a power outlet, set the time of the day as described below.
15 Preparation section.
16 Basic section 1 1 2 2 3 3 1 1 2 2 3 3 STANDBY/TIMER 1 1 CD 6 TUNER /BAND MUTE TAPE ™£ 2 2 VOLUME 3 3 1. Switch power ON. If a CD or casset te has been loaded in the unit, simply pressing the play k ey ( 6 ) t urns po wer ON and starts playbac k automatically .
17 Basic section PHONES INPUT ENTER ¢ 4 –P.CALL– VIDEO2 CD TUNER TAPE FUNCTION MUTE CURSOR SET Muting the sound temporarily ÷ Press again to resume the original volume. ÷ This is also cancelled when the volume is changed. MUTE Listening through headphones Insert the headphone plug into the “PHONES” jack.
18 Basic section TUNER /BAND 1 1 ¢ 4 –P.CALL– 1 1 2 2 TUNER /BAND 2 2 3 3 3 3 1 1 2 2 1. Select the TUNER input. 2. Select the broadcast band. Each press changes the band. 1 FM 2 AM or 1 FM 2 MW 3 LW 3. Select a station. It is r ecommended to pr eset radio stations in adv ance.
19 Basic section INPUT Remote control Remote control 6 BAND 1 VIDEO1 2 VIDEO2 3 CD 4 TUNER 5 T APE Frequency display preset number display Switching between stereo tuning and monaural tuning Use the monaural tuning mode when the radio wave is weak and noisy.
20 Basic section INPUT TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION Let's put out some sound A maximum of 40 stations will be preset. When there are many stations and the intended station has not been preset, please also use “One-by-one presetting (manual preset)”.
21 Basic section Desired radio stations can be selected and preset one by one. (Up to 40 stations can be preset in memory.) 1 Receive a desired station in advance. ("T o receive a station that has not been preset") ( 2 With the TUNER input selected, press the SET key to display the T uner menu.
22 Basic section 1 1 2 2 2 2 0 1 1 CD 6 T / 2 2 TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION 1. Load a disc. 1 Open the CD tray. 2 Place a disc. 3 Close the CD tray.
23 Basic section 6 BAND CD 6 TUNE R /BAN D STOP 0 Skipping tracks T o skip backwar d T o skip forwar d ÷ The track in the direction of the key pressed is skipped, and the selected track will be played from the beginning. ÷ When the 4 key is pressed once during playback, the track being played will be played from the beginning.
24 Basic section PUSH OPEN TAPE ™£ 2 2 2 2 STOP A 1 1 2 2 1 1 DIRECTION Playback of tape If you load a tape in the cassette deck in advance while the power is off. pressing the TAPE key turns power on automatically and starts the tape playback.
25 Basic section CURSOR SET 6 BAND TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION Fast forwarding/rewinding or skipping tape By leaving non-recorded blanks of 4 seconds or more between each piece of music, desired piece of music can be selected by skipping others (up to 16 in each of the backward and forward directions).
26 Basic section INPUT ¶ REC CURSOR DIRECTION SET PUSH OPEN DIRECTION Recording on T APE Note that this casset te dec k cannot r ecord ont o Metal tapes. Note Note Note Let's recording 1. Load a cassette tape. 1 Open the cassette holder. 2 Insert a tape and close the cassette holder ÷ Be sure to remo ve tape slac k.
27 Basic section REC REC 7 TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION Pause the recording (A.R.M.) ÷ Press the ¶ REC key during recording. It stops after leaving a non-recorded blank of 4 seconds.
28 Application section RDS is a system which transmits useful informa- tion (digital data) for FM broadcasts together with the broadcast signal. Tuners and receivers de- signed for RDS reception can extract the informa- tion from the broadcast signal for use with vari- ous functions such as automatic display of the station name.
29 Application section CURSOR SET INPUT SET 1 Select the TUNER input. 2 Display the "T uner" menu. 3 Select "PTY ✻✻✻ ". 4 Select the desired PTY .
30 Application section TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION 1 VIDEO1 2 VIDEO2 3 CD 4 TUNER 5 T APE CURSOR INPUT SET T o be able to listen to the desired information at any time (EON) By using the EON function, which manages the information of other stations, listening to desired information like traffic information or news etc.
31 Application section Receive an RDS station. 2 ¢ 4 –P.CALL– Select a station where “RDS” and “EON” are lit. “ RDS ” and “ EON ” are Lit Wait for the desired information. 3 CD or TAPE playback may also be started. As long as the unit is ON, the unit is always ready for the reception.
32 Application section ENTER CURSOR INPUT ENTER SET 6 TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION Playback of CD Listening in the desired sequence (program playback) Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) Program desired tracks.
33 Application section Play the programmed tracks. 6 BAND ¢ 4 –P.CALL– 1 Select the CD input. 2 Display the "CD" menu. 3 Select the message to be displayed, "Program On". 4 Select the "Check". 5 Display a program number and check the track pro- grammed under it.
34 Application section CURSOR INPUT SET 6 6 BAND TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION Repeated playback You can repeatedly listen to a favorite track or disc. Program repeat playback ÷ By progr amming only the desir ed trac ks, it is possible t o perfor m the r epeat playbac k of only the pr ogrammed tr acks lat er .
35 Application section CURSOR INPUT SET 6 TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION 1 Select the CD input. 2 Display the "CD" menu. 3 Select the message to be displayed, "Random Off" or "Random On". 4 Select "On".
36 Application section Convenient Recording Methods Selection of the Recording T ype This unit provides the following recording fea- tures in addition to normal recording. Select the appropriate method according to the purpose of recording. Note that this cassette deck cannot record onto Metal tapes.
37 Application section CURSOR ENTER SET 1 Display the "Function" menu. 2 Select the message to be displayed, "CD → T ape Rec". 3 Select the "Direct Rec". 4 Start recording Recording an entire CD onto tape (CD direct recording) ÷ This function is canceled when the pr ogram mode is activ ated.
38 Application section CURSOR ENTER SET 1 Display the "Function" menu. 2 Select the message to be displayed, "CD → T ape Rec". 3 Select the "One T rack Rec".
39 Application section CURSOR ENTER SET 1 Display the "Function" menu. 2 Select the message to be displayed, "CD → T ape Rec". 3 Select the "Program Rec".
40 Application section ¢ 4 –P.CALL– CURSOR ENTER SET 4 , ¢ T one control and sound field effect adjustment Use the following procedure to adjust the levels of the Video1 and Video2 inputs. Adjusting the external input level 1 Display the "Function" menu.
41 Application section ¢ 4 –P.CALL– CURSOR ENTER SET 4 , ¢ CURSOR Bass Boost and tone control The Bass Boost function allows you to enhance or compensate for the low frequencies and the tone control function is used for fine adjust- ments of the bass (low frequencies) and treble (high frequencies).
42 Application section CURSOR ENTER SET 4 , ¢ Dolby V irtual setting Tone control and sound field effect adjustment The Dolby Virtual function is designed to provide a simulated surround effect from two speakers on the left and right. This is a convenient function for playing a movie, etc.
43 Application section CURSOR ENTER SET 4 , ¢ Tone control and sound field effect adjustment The DSP (Digital Surround Processor) controls the tone of a signal in the digital form and makes sound processing without quality degradation possible.
44 Application section CURSOR ENTER SET 4 , ¢ ¢ 4 –P.CALL– SET T imer operation Adjust the clock before setting the timer. O.T .T . : Starts playback of the selected input source when the set time comes and turns power off in an hour. This program is executed only once every time after it is set.
45 Application section CURSOR ENTER SET 4 , ¢ Setting the timer playback Timer playback includes normal timer playback and AI (Artificial Intelligence) timer playback. Normal timer playback: Starts playback of the selected source at the set on time and turns power OFF at the set off time.
46 Application section ¢ 4 –P.CALL– SET ¢ 4 –P.CALL– SET ¢ 4 –P.CALL– SET 7 Select a preset radio station. (This step is r equired only when the tuner input is selected in the abo v e.) 8 Select the message to be displayed, "AI-Play" or “Normal-Play”.
47 Application section CURSOR ENTER SET 4 , ¢ T imer recording 1 Display the "Function" menu. 2 Select the message to be displayed, "T imer Rec Off" or “T imer Rec On”. 3 Select the message to be displayed, "On”. 4 Perform the setting op- eration in steps 4 to 5 under "Setting the timer playback".
48 Application section CURSOR SET CURSOR SET TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION Checking the time information display of CD The remote control unit can display the time information of CD such as the playing time and total time. The time information can be checked while the CD is playing or stopped.
49 Application section CURSOR ENTER SET 4 , ¢ ¢ 4 –P.CALL– SET ENTER Adjusting the display contrast Use the following procedure to adjust the density of the display on the remote control unit. 1 Display the "Function" menu. 2 Select the message to be displayed, "Contrast".
50 Application section CURSOR ENTER SET CURSOR SET SET ENTER 1 Display the "Function" menu. 2 Select the message to be displayed, "TV". 3 Select the manufacturer . 4 Select the type of the remote control codes. 5 Check the remote control operations.
51 Application section Registering the component connected to the rear -panel V ideo1 or Video2 input 1 Display the "Function" menu. 2 Select the message to be displayed, "V ideo1" or "Video2". 3 Select the type of the com- ponent (VCR, DVD, etc).
52 Application section TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION TV VIDEO1 VIDEO2 CD TUNER TAPE FUNCTION VOLUME CLOCK MUTE CONFIRM/DEMO HOME INPUT DIRECTION SET ENTER ¶ REC – P.
53 Application section TV control screen This screen consists of a single page. VCR control screen This consists of 2 pages. Each press of the SET key switches the pages alter- nately. DVD control screen This consists of 3 pages. Each press of the SET key switches the pages alternately.
54 Knowledge section Cleaning the head section Cleaning the heads and peripheral components For maintaining the best condition of the deck and for longer service life, always keep the heads (recording / playback / erase), capstan and pinch roller clean.
55 Knowledge section Safety tab (accidental erasure prevention tab) After an important recording has been finished, break the safety tab, to prevent the recorded contents from being erased or recorded on accidentally.
56 Knowledge section Note to CATV system installer This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper groundi.
57 Knowledge section In case of difficulty Operation to reset The micr ocomputer may f all into malfunction (impos- sibility t o operate, er roneous displa y , etc.
58 Knowledge section In case of difficulty Remedy Cause Symptom CD player section ÷ Place the disc properly, with the label side facing upward. ÷ Place the disc properly. ÷ Clean the disc referring to “Disc han- dling precautions” . ÷ Try another disc.
59 Knowledge section Remedy Cause Symptom ÷ Clean the head referring to “Mainte- nance” . ÷ Try another tape. ÷ Play a recorded tape. ÷ Close the holder completely. ÷ Press operation keys in more than a few seconds after closing the cassette holder.
60 Knowledge section INDEX [A] A.R.M. ...................................................................... 27 ACTIVE indicator ...................................................... 11 Adjusting the display contrast .................................
61 Knowledge section Menu display chart "TUNER" menu display <Reception Mode> Stereo/Mono Stereo Mono Direct T uning <Memory> Auto Memory (#2) Auto Preset (#1)(#3) Manual Memory .
62 Knowledge section Specifications [Amplifier section] Output pow er (U .S.A. and Canada) Rat ed output power (fr ont channel only) 30 w atts per channel minimum RMS , both c han- nels dr iven, at 8 Ω from 1 0 0 Hz to 20 kHz with no mor e than 0.9% total har monic dist ortion.
63 Knowledge section Specifications KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. ÷ Sufficient performance may not be exhibited at extremely cold locations (where water freezes).
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for informa- tion or service on this product.
Ein wichtiger Punkt beim Kauf des Geräts Kenwood 600 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenwood 600 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenwood 600 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenwood 600 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenwood 600 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenwood 600 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenwood 600 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenwood 600. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenwood 600 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
