Benutzeranleitung / Produktwartung HX-Z1 des Produzenten JVC
Zur Seite of 68
GVT0077-001A [J] INSTRUCTIONS HX-Z1 — Consists of CA-HXZ1 and SP-HXZ1 COMP A CT COMPONENT SYSTEM COMPACT DIGITAL AUDIO V O L U M E P R E S E T S O U N D M O D E For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet.
– G-1 – W arnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
– G-2 – For Canada/pour le Canada CA UTION: TO PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG T O WIDE SLO T , FULL Y INSER T . A TTENTION: POUR EVITER LES CHOCS ELECTRIQUES , INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE D ANS LA BORNE CORRESPOND ANTE DE LA PRISE ET POUSSER JUSQU A U FOND .
– 1 – Introduction About This Manual This manual is org anized as follows: • The manual mainly explains operations using the b uttons and controls on the unit. Y ou can also use the b uttons on the remote control if they ha ve the same or similar names (or marks) as those on the unit.
– 2 – Contents Location of the Buttons and Contr ols ....................... 3 Front Panel ................................................................. 3 Remote Control .......................................................... 5 Getting Started .
– 3 – Location of the Buttons and Controls Become familiar with the buttons and controls on your unit. Front Panel Front Panel T op view of p Indication-lamp panel COMPACT DIGITAL AUDIO V O L U M E P R E S E T S O U N D M O D E EN01-08.
– 4 – Continued Display Window See pages in the parentheses for details. Front Panel 1 Disc trays 2 (standby/on) button and lamp (9, 23, 24) 3 ECO (Ecology) b utton (9) 4 Remote sensor 5 Display windo w 6 FM/AM b utton (10, 12) Pr essing this button also turns on the unit.
– 5 – When using the remote control, point it at the remote sensor on the front panel. Remote Control Remote Control 1 Number buttons (12, 14, 15) 2 4 ( 1 ) (re verse skip/re verse search) b utton.
– 6 – Getting Started Supplied Accessories Make sure that y ou have all the follo wing items. The number in the parentheses indicates the quantity of the pieces supplied. • AM loop antenna (1) • FM antenna (1) • Remote control (1) • Batteries (2) If anything is missing, consult your dealer immediately .
– 7 – 1 If cords are co ver ed with insulation, twist the core of the cor d at the end of each cord, then r emove the insulation. 2 Connect the AM loop antenna to the AM LOOP terminals as illustrated. 3 T urn the AM loop antenna until y ou hav e the best r eception.
– 8 – CD OPTICAL DIGIT AL OUTPUT Connecting Other Equipment Y ou can connect both analog and digital equipment. • DO NOT connect any equipment while the power is on.
– 9 – Common Operations T urning On or Off the Power T o tur n on the unit, press (or ST ANDBY/ON on the remote control) so that the lamp on the b utton goes off. T o tur n off the unit (on standby), press (or ST ANDBY/ON on the remote control) again so that the lamp on the b utton lights up.
– 10 – Selecting the Sources T o listen to the FM/AM br oadcasts, press FM/AM. (See page 12.) T o play back CDs, pr ess CD 3¥8 . (See pages 13 – 17.) T o play back tapes, press T APE 2 3 . (See page 18.) T o select the exter nal equipment as the source, press A UX.
– 11 – Surround modes* D ANCE : Increases resonance and bass. HALL : Adds depth and brilliance to the sound. ST ADIUM : Adds clarity and spreads the sound, lik e in an outdoor stadium. SEA (Sound Effect Amplifier) modes R OCK : Boosts low and high frequenc y .
– 12 – Listening to FM and AM Broadcasts T uning in to a Station 1 Pr ess FM/AM. The unit automatically turns on and tunes in to the previously tuned station (either FM or AM). • Each time you press the button, the band alternates between FM and AM.
– 13 – Playing Back CDs (CD/CD-R/CD-RW) This unit has been designed to playback the follo wing CDs: • CD (Audio CD) • CD-R (CD-Recordable) • CD-R W (CD-ReWritable) Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit.
– 14 – Playing Back the Entire Discs—Continuous Play Y ou can play CDs continuously . 1 Load CDs. 2 Pr ess one of the disc number (CD1, CD2, and CD3) b uttons f or the disc you want to play . The unit starts searching for the CD and CD play starts from the f irst track of the selected disc.
– 15 – Programming the Playing Order of the T racks —Program Play Y ou can arrange the playing order of the tracks before y ou start playing. Y ou can program up to 32 tracks. • T o use Repeat Play (see page 17) for Program Play , press REPEA T after starting Program Play .
– 16 – Playing at Random—Random Play The tracks of all loaded CDs will be played at random. • T o use Repeat Play (see page 17) for Random Play , press REPEA T after starting Random Play . Only REPEA T 1 and REPEA T ALL can be selected for Random Play .
– 17 – Repeating T racks or CDs—Repeat Play Y ou can have all the CDs, the pro gram or the individual track currently playing to repeat as many times as you lik e.
– 18 – Y ou can play back type I tapes without changing any settings. Playing Back a T ape 1 Pr ess 0 EJECT for the cassette deck. 2 Put a cassette in with the exposed part of the tape down. 3 Close the cassette holder gently . 4 Pr ess T APE 2 3 .
– 19 – Recording Recording on a T ape 1 Press 0 EJECT to insert a recordable cassette with the exposed part of the tape do wn. 2 Close the cassette holder gently . • If you want to record on both sides of a tape, see “T o record on both sides—Rev erse Mode.
– 20 – CD Synchronized Recording By using CD Synchronized Recording methods, you can start and stop a CD play and tape recording at the same time. CD Synchronized Recording consists of the followi.
– 21 – T racks to be recorded on the rev erse side (SIDE-B) appear . SET / DISPLA Y REVERSE MODE CD REC ST ART 7 Auto Edit Recording By using Auto Edit Recording, you can record the CD tracks to f it the tape. Auto Edit Recording makes a program by selecting the CD tracks in numerical order .
– 22 – Using the T imers There are three timers a vailable—D AIL Y (Daily T imer), REC (Recording T imer), and SLEEP (Sleep T imer). Before using the timers, you need to set the clock built in the unit. (See page 9.) Using Daily Timer W ith Daily T imer, you can be a waken with your fa vorite music or radio program.
– 23 – 4 Set the off-time y ou want the unit to turn off (on standby) at. 1) Tu r n 4 / ¢ to set the hour , then press SET/DISPLA Y . “SET” appears for 1 second. 2) Tu r n 4 / ¢ to set the minute, then press SET/DISPLA Y . “SET” appears for 1 second, then the unit enters source selecting mode.
– 24 – 4 Set the on-time y ou want the unit to turn on at. 1) Tu r n 4 / ¢ to set the hour, then press SET/DISPLA Y . “SET” appears for 1 second. 2) Tu r n 4 / ¢ to set the minute, then press SET/DISPLA Y . “SET” appears for 1 second, then the unit enters of f-time setting mode.
– 25 – SLEEP 10 SLEEP 60 SLEEP 30 SLEEP 20 Canceled SLEEP 120 SLEEP 90 T o turn on or off Recording T imer after its setting is done 1 Press CLOCK/TIMER r epeatedly until “REC” appears on the display . (T imer) indicator lights up and the REC (Recording T imer) indicator starts flashing on the display .
– 26 – Maintenance T o get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in the cassette.
– 27 – If you are ha ving a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints gi ven here, or the unit has been physicall y damaged, call a qualified person, such as your dealer , for service.
– 28 – Specifications Amplifier section—CA-HXZ1 Output P ow er SUBWOOFERS: 130 W per channel, min. RMS, driven into 6 Ω at 63 Hz with no more than 10% total harmonic distortion. MAIN SPEAKERS: 55 W per channel, min. RMS, dri ven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion.
BT -51001-5 (0301) QUALITY SER VICE HOW TO LOCA TE YOUR JVC SERVICE CENTER Dear Customer , In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit.
THIS LIMITED W ARRANTY IS V ALID ONL Y IN THE FIFTY (50) UNITED ST A TES, THE DISTRICT OF COLUMBIA AND IN COMMONWEAL TH OF PUERTO RICO. WHA T WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner .
0202MWMMDWJEM EN VICT OR COMP ANY OF JAP AN, LIMITED Cover.HX-Z1[J]f.pm6 2/18/02, 5:42 PM 2.
NOTICE/ A VIS COMPACT DIGITAL AUDIO FM/AM CD3 CD2 CD1 CD TAPE AUX CLOCK / TIMER V O L U M E P R E S E T S O U N D M O D E SUBWOOFER LEVEL CANCEL / DEMO SET/ DISPLAY REPEA T EXTENDED SUPER BASS CD-R / .
GVT0077-002A [C] INSTRUCTIONS MANUEL D’INSTRUCTIONS HX-Z1 — Consists of CA-HXZ1 and SP-HXZ1 COMP A CT COMPONENT SYSTEM SYSTEME DE COMPOSANTS COMPACT COMPACT DIGITAL AUDIO V O L U M E P R E S E T S O U N D M O D E For Customer Use: Enter below the Model No .
– G-1 – W arnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
– G-2 – For Canada/pour le Canada CA UTION: TO PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG T O WIDE SLO T , FULL Y INSER T . A TTENTION: POUR EVITER LES CHOCS ELECTRIQUES , INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE D ANS LA BORNE CORRESPOND ANTE DE LA PRISE ET POUSSER JUSQU A U FOND .
– 1 – English Introduction About This Manual This manual is org anized as follows: • The manual mainly explains operations using the b uttons and controls on the unit. Y ou can also use the b uttons on the remote control if they ha ve the same or similar names (or marks) as those on the unit.
– 2 – English Contents Location of the Buttons and Contr ols ....................... 3 Front Panel ................................................................. 3 Remote Control .......................................................... 5 Getting Started .
– 3 – English Location of the Buttons and Controls Become familiar with the buttons and controls on your unit. Front Panel Front Panel T op view of p Indication-lamp panel COMPACT DIGITAL AUDIO V O L U M E P R E S E T S O U N D M O D E EN01-08.HX-Z1[C]f.
– 4 – English Continued Display Window See pages in the parentheses for details. Front Panel 1 Disc trays 2 (standby/on) button and lamp (9, 23, 24) 3 ECO (Ecology) b utton (9) 4 Remote sensor 5 Display windo w 6 FM/AM b utton (10, 12) Pr essing this button also turns on the unit.
– 5 – English When using the remote control, point it at the remote sensor on the front panel. Remote Control Remote Control 1 Number buttons (12, 14, 15) 2 4 ( 1 ) (re verse skip/re verse search).
– 6 – English Getting Started Supplied Accessories Make sure that y ou have all the follo wing items. The number in the parentheses indicates the quantity of the pieces supplied. • AM loop antenna (1) • FM antenna (1) • Remote control (1) • Batteries (2) If anything is missing, consult your dealer immediately .
– 7 – English 1 If cords are co ver ed with insulation, twist the core of the cor d at the end of each cord, then r emove the insulation. 2 Connect the AM loop antenna to the AM LOOP terminals as illustrated. 3 T urn the AM loop antenna until y ou hav e the best r eception.
– 8 – English CD OPTICAL DIGIT AL OUTPUT Connecting Other Equipment Y ou can connect both analog and digital equipment. • DO NOT connect any equipment while the power is on.
– 9 – English Common Operations T urning On or Off the Power T o tur n on the unit, press (or ST ANDBY/ON on the remote control) so that the lamp on the b utton goes off. T o tur n off the unit (on standby), press (or ST ANDBY/ON on the remote control) again so that the lamp on the b utton lights up.
– 10 – English Selecting the Sources T o listen to the FM/AM br oadcasts, press FM/AM. (See page 12.) T o play back CDs, pr ess CD 3¥8 . (See pages 13 – 17.) T o play back tapes, press T APE 2 3 . (See page 18.) T o select the exter nal equipment as the source, press A UX.
– 11 – English Surround modes* D ANCE : Increases resonance and bass. HALL : Adds depth and brilliance to the sound. ST ADIUM : Adds clarity and spreads the sound, lik e in an outdoor stadium. SEA (Sound Effect Amplifier) modes R OCK : Boosts low and high frequenc y .
– 12 – English Listening to FM and AM Broadcasts T uning in to a Station 1 Pr ess FM/AM. The unit automatically turns on and tunes in to the previously tuned station (either FM or AM). • Each time you press the button, the band alternates between FM and AM.
– 13 – English Playing Back CDs (CD/CD-R/CD-RW) This unit has been designed to playback the follo wing CDs: • CD (Audio CD) • CD-R (CD-Recordable) • CD-R W (CD-ReWritable) Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit.
– 14 – English Playing Back the Entire Discs—Continuous Play Y ou can play CDs continuously . 1 Load CDs. 2 Pr ess one of the disc number (CD1, CD2, and CD3) b uttons f or the disc you want to play . The unit starts searching for the CD and CD play starts from the f irst track of the selected disc.
– 15 – English Programming the Playing Order of the T racks —Program Play Y ou can arrange the playing order of the tracks before y ou start playing. Y ou can program up to 32 tracks. • T o use Repeat Play (see page 17) for Program Play , press REPEA T after starting Program Play .
– 16 – English Playing at Random—Random Play The tracks of all loaded CDs will be played at random. • T o use Repeat Play (see page 17) for Random Play , press REPEA T after starting Random Play . Only REPEA T 1 and REPEA T ALL can be selected for Random Play .
– 17 – English Repeating T racks or CDs—Repeat Play Y ou can have all the CDs, the pro gram or the individual track currently playing to repeat as many times as you lik e.
– 18 – English Y ou can play back type I tapes without changing any settings. Playing Back a T ape 1 Pr ess 0 EJECT for the cassette deck. 2 Put a cassette in with the exposed part of the tape down. 3 Close the cassette holder gently . 4 Pr ess T APE 2 3 .
– 19 – English Recording Recording on a T ape 1 Press 0 EJECT to insert a recordable cassette with the exposed part of the tape do wn. 2 Close the cassette holder gently . • If you want to record on both sides of a tape, see “T o record on both sides—Rev erse Mode.
– 20 – English CD Synchronized Recording By using CD Synchronized Recording methods, you can start and stop a CD play and tape recording at the same time.
– 21 – English T racks to be recorded on the rev erse side (SIDE-B) appear . SET / DISPLA Y REVERSE MODE CD REC ST ART 7 Auto Edit Recording By using Auto Edit Recording, you can record the CD tracks to f it the tape. Auto Edit Recording makes a program by selecting the CD tracks in numerical order .
– 22 – English Using the T imers There are three timers a vailable—D AIL Y (Daily T imer), REC (Recording T imer), and SLEEP (Sleep T imer). Before using the timers, you need to set the clock built in the unit. (See page 9.) Using Daily Timer W ith Daily T imer, you can be a waken with your fa vorite music or radio program.
– 23 – English 4 Set the off-time y ou want the unit to turn off (on standby) at. 1) Tu r n 4 / ¢ to set the hour , then press SET/DISPLA Y . “SET” appears for 1 second. 2) Tu r n 4 / ¢ to set the minute, then press SET/DISPLA Y . “SET” appears for 1 second, then the unit enters source selecting mode.
– 24 – English 4 Set the on-time y ou want the unit to turn on at. 1) Tu r n 4 / ¢ to set the hour, then press SET/DISPLA Y . “SET” appears for 1 second. 2) Tu r n 4 / ¢ to set the minute, then press SET/DISPLA Y . “SET” appears for 1 second, then the unit enters of f-time setting mode.
– 25 – English SLEEP 10 SLEEP 60 SLEEP 30 SLEEP 20 Canceled SLEEP 120 SLEEP 90 T o turn on or off Recording T imer after its setting is done 1 Press CLOCK/TIMER r epeatedly until “REC” appears on the display . (T imer) indicator lights up and the REC (Recording T imer) indicator starts flashing on the display .
– 26 – English Maintenance T o get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.
– 27 – English If you are ha ving a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints gi ven here, or the unit has been physicall y damaged, call a qualified person, such as your dealer , for service.
– 28 – English Specifications Amplifier section—CA-HXZ1 Output P ow er SUBWOOFERS: 130 W per channel, min. RMS, driven into 6 Ω at 63 Hz with no more than 10% total harmonic distortion. MAIN SPEAKERS: 55 W per channel, min. RMS, dri ven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion.
0202MWMMDWJEM EN, FR VICT OR COMP ANY OF JAP AN, LIMITED Cover.HX-Z1[C]f.pm6 2/18/02, 5:19 PM 2.
NOTICE/ A VIS COMPACT DIGITAL AUDIO FM/AM CD3 CD2 CD1 CD TAPE AUX CLOCK / TIMER V O L U M E P R E S E T S O U N D M O D E SUBWOOFER LEVEL CANCEL / DEMO SET/ DISPLAY REPEA T EXTENDED SUPER BASS CD-R / .
Ein wichtiger Punkt beim Kauf des Geräts JVC HX-Z1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC HX-Z1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC HX-Z1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC HX-Z1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC HX-Z1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC HX-Z1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC HX-Z1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC HX-Z1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC HX-Z1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
