Benutzeranleitung / Produktwartung HR-J6003UM des Produzenten JVC
Zur Seite of 42
H R-J6003UM VIDEOGRABADOR VIDEO CASSETTE RECORDER MANUAL DE PU30425-1791 For Customer Use: Enter below the Serial No. which is located on the rear of cabinet. Retain this information for future reference. Model No. HR-J6003UM Serial No.
2 Dear Customer , Thank you for purchasing the JVC VHS video cassette recorder . Before use, please read the safety information and precautions contained on this page to ensure safe use of your new VCR. CAUTIONS W ARNING: DANGEROUS VOL T AGE INSIDE W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
3 CONTENTS T IMER RECORDING 25 Instant Timer Recording (ITR) ............... 25 On-Screen Timer Programming ........... 25 Check And Cancel Programs .......................... 27 Auto SP/EP T imer ............................................ 28 Auto T imer .
4 CH3 CH4 RF OUT INST ALLING YOUR NEW VCR CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in “SPECIFICA TIONS” ( Z pg. 42). SITUA TE VCR 2 Place the VCR on a stable, horizontal surface. CONNECT VCR TO TV 3 The connection method you use depends on the type of TV you have.
5 12 3 45 6 78 9 0 12 3 45 6 78 9 0 6 5 / 8 q – ™ + £ Clock TURN ON THE VCR 1 Press POWER . If watching channel 3 or 4, press TV/VIDEO to select the VIDEO mode. VIDEO is displayed on the front display panel. ACCESS ON-SCREEN MENU 2 Press MENU to bring up the Main Menu screen.
6 Clock Setting ACCESS CLOCK SET SCREEN 1 Place the arrow at the Initial Set screen next to “CLOCK SET” by pressing CH 5 ∞ , then press OK . SET DA TE AND TIME 2 Press the appropriate NUMBER keys to set the date and time (if only 1 digit, press "0" first).
7 T uner Set Receivable Channels TURN ON THE VCR 1 Press POWER . If watching on channel 3 or 4, press TV/ VIDEO to select the VIDEO mode. VIDEO is displayed on the front display panel. ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS TUNER SET SCREEN 3 Place the arrow next to "TUNER SET" by pressing CH 5 ∞ , then press OK .
8 12 3 45 6 78 9 0 12 3 45 6 78 9 0 PERFORM AUTO CHANNEL SET 6 Place the arrow next to "AUT O CHANNEL SET" by pressing CH 5 ∞ , then press OK . Receivable channels in your area are automatically assigned to the CH 5 ∞ buttons, and non-receivable channels are skipped.
9 Add Or Delete A Channel ACCESS TUNER SET SCREEN 1 Access by performing steps 2 and 3 of the T uner procedure on page 7. ● T o add a channel, go to step 2 . ● T o delete a channel, skip to step 4 . ACCESS AFC SCREEN 2 Place the arrow next to "AFC" by pressing CH 5 ∞ , then press OK .
10 12 3 45 6 78 9 0 12 3 45 6 78 9 0 6 5 / 8 q – ™ + £ SIMPLE PLA YBACK AND RECORDING LOAD A CASSETTE 1 Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR.
11 Simple Recording Accidental erasure prevention ● T o prevent accidental recording on a recorded cassette, remove its record safety tab. T o record on it later , cover the hole with adhesive tape. Record safety tab LOAD A CASSETTE 1 Make sure the record safety tab is intact.
12 P AUSE DURING PLA YBACK 1 Press P AUSE . If there is vertical jitter , press CH 5 or ∞ on the VCR's front panel or remote to stabilize the picture. FRAME-BY -FRAME PLA YBACK 2 Advance the tape one frame by pressing P AUSE again. ● T o control the direction of Frame-by-Frame playback, press PUSH JOG ™ or £ during still picture mode.
13 Manual T racking Once playback begins, the VCR’ s automatic tracking function is engaged. If noise appears in the picture, you can override this and make the adjustment manually .
14 12 3 45 6 78 9 0 12 3 45 6 78 9 0 Select The Soundtrack Y our VCR can record two soundtracks simultaneously (Normal and Hi-Fi) and play back the selected one, or both together .
15 12 3 45 6 78 9 0 12 3 45 6 78 9 0 Superimpose This function, switchable between ON and OFF , determines whether or not operational indicators will appear on screen. ACCESS MAIN MENU SCREEN 1 Press MENU . ACCESS FUNCTION SET SCREEN 2 Place the arrow next to "FUNCTION SET" by pressing CH 5 ∞ , then press OK .
16 Skip Search Repeat Playback ST ART REPEA T 1 Press and hold PLA Y (until "PLA Y" blinks on the front display panel) during playback, then release. ● The entire tape is played back 20 times. STOP REPEA T 2 T o stop, press STOP at any time.
17 12 3 45 6 78 9 0 12 3 45 6 78 9 0 Instant ReV iew At the press of a button, you can power up your VCR, rewind the tape and begin viewing the most recent timer -recorded program. ACTIV A TE INST ANT REVIEW 1 After ensuring that the VCR is off and the T imer mode is disengaged, press REVIEW .
18 12 3 45 6 78 9 0 12 3 45 6 78 9 0 COUNT 0:33:27 T ape Position Indicator The T ape position indicator appears on screen when, from the stop mode, you press FF , REW or perform an Index Search or Instant ReV iew . The position of " " in relation to "B" (Beginning) or "E" (End) shows you where you are on the tape.
19 12 3 45 6 78 9 0 12 3 45 6 78 9 0 ACCESS FUNCTION SET SCREEN 4 Press CH 5 ∞ to place the arrow next to “FUNCTION SET”, then press OK . ACCESS SPECIAL FUNCTION SCREEN 5 Press CH 5 ∞ to place the arrow next to “SPECIAL FUNCTION”, then press OK .
20 12 3 45 6 78 9 0 12 3 45 6 78 9 0 B.E.S.T . Picture System PLA YBACK AND RECORDING FEA TURES (cont.) Y our VCR is equipped with the B.E.S.T . (Biconditional Equalized Signal T racking) feature, whi.
21 12 3 45 6 78 9 0 12 3 45 6 78 9 0 Recording Perform steps 1 – 3 on page 1 1 ("Simple Recording") before continuing. ST ART END B.E.S.T .PICTURE SYSTEM ST ART END B.E.S.T .PICTURE SYSTEM ST ART RECORDING 1 Press and hold REC and press PLA Y on the remote control, or press REC on the VCR's front panel.
22 12 3 45 6 78 9 0 12 3 45 6 78 9 0 PLA YBACK AND RECORDING FEA TURES (cont.) Playback The VCR assesses the quality of the tape once you initiate playback. Before beginning, perform steps 1 and 2 on page 10. ST ART PLA YBACK 1 Press PLA Y . ● The VCR adjusts the playback picture quality based on the quality of the tape in use.
23 12 3 45 6 78 9 0 12 3 45 6 78 9 0 Record One Program While W atching Another ENGAGE TV MODE 1 During recording... ● If using the RF connection ( Z pg. 4), press TV/VIDEO . The VCR's VIDEO indicator goes out and the TV broadcast being recorded disappears.
24 12 3 45 6 78 9 0 12 3 45 6 78 9 0 PLA YBACK AND RECORDING FEA TURES (cont.) Stereo And SAP (Second Audio Pr ogram) Y our VCR’ s built-in MTS decoder enables reception of Multi- channel TV Sound broadcasts. ● The ST indicator on the front display panel lights during stereo broadcast reception, and SAP lights during SAP program reception.
25 Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the VCR off after recording is finished. ST ART RECORDING 1 Press REC . ENGAGE ITR MODE 2 Press REC again. ITR blinks and 0:30 appears on the front display panel.
26 12 3 45 6 78 9 0 12 3 45 6 78 9 0 TIMER RECORDING (cont.) EXAMPLE If you program the VCR to timer record a show on September 6 on channel 40 from 12:00 noon to 1:00 PM in SP mode, the screen will l.
27 12 3 45 6 78 9 0 12 3 45 6 78 9 0 DISENGAGE TIMER 1 Press TIMER , then press POWER . ACCESS PROGRAM SET SCREEN 2 Press MENU , then press OK . CHECK PROGRAM INFORMA TION 3 Press CH 5 ∞ to check the programs in succession. Check And Cancel Pr ograms CANCEL A PROGRAM 4 Press CANCEL .
28 12 3 45 6 78 9 0 12 3 45 6 78 9 0 TIMER RECORDING (cont.) Auto SP/EP Timer If, when recording in SP mode, there is not enough tape to record the entire program, the VCR automatically switches to EP mode to allow complete recording. This feature is especially handy when recording a program of more than 2 hours in length.
29 12 3 45 6 78 9 0 12 3 45 6 78 9 0 Auto Timer When activated, this function automatically engages the timer when the VCR's power is turned off, and disengages it when the power is turned on.
30 6 5 / 8 q – ™ + £ 12 3 45 6 78 9 0 12 3 45 6 78 9 0 Edit Fr om A Camcorder Y ou can use a camcorder as the player and your VCR as the recorder . MAKE CONNECTIONS 1 Connect an A V cable (not supplied) between the camcorder ’ s VIDEO OUT and AUDIO OUT connectors and your VCR’ s VIDEO IN and AUDIO IN connectors.
31 ACCESS AUX INPUT SCREEN 9 Press CH 5 ∞ to place the arrow next to “AUX INPUT”, then press OK . SELECT INPUT 10 If you are connecting the A V cable to the AV connectors on the front of the VCR , place the arrow next to "FRONT" by pressing CH 5 ∞ .
32 Edit T o Or Fr om Another VCR Y ou can use your VCR as the player or the recorder . MAKE CONNECTIONS 1 Connect an A V cable (not supplied) between the player ’ s VIDEO OUT and AUDIO OUT connectors and the recorder’s VIDEO IN and AUDIO IN connectors.
33 78 9 0 78 9 0 6 5 / 8 q – ™ + £ 6 5 / 8 q – ™ + £ PAUSE/ SPECIAL FUNCTION REMOTE PAUSE This function makes it easier to create edited videos when your VCR is used as the source player in combination with another VCR equipped with a Remote P AUSE Connector .
34 Refer to the illustrations on page 33. LOCA TE EDIT -IN POINT 7 Find the point on the source tape from where you want the edited scene to begin by pressing PUSH JOG ™£ , then press OK on the remote control. ● The OK button on the VCR itself functions the same as the P AUSE button, so be sure to press the OK button on the remote.
35 SPECIAL FEA TURES TV Multi-Brand Remote Contr ol The VCR's remote control can control several functions on JVC remote control TVs and on the brands of remote control TVs listed below . Some TV brands have more than one code. If the TV will not function with one code, try entering another .
36 TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair . POWER POSSIBLE CAUSE ● The power cord is disconnected.
37 Set the VCR to the appropriate channel. Refer to the directions and the illustration under “Edit T o And From Another VCR” ( Z pg. 32) or “Edit From A Camcorder” ( Z pg. 30) and properly connect the units. Make sure the power to all units is on.
38 QUESTIONS AND ANSWERS PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the VCR indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads.
39 INDEX List Of T erms This guide serves as a quick way to locate frequently used terms and on-screen display names. The first page on which the term appears is listed. Most terms appear more than once in the instruction manual. A A/B Code ..........
40 INDEX (cont.) FRONT VIEW 1 POWER ON/OFF Button ( Z pg. 5) 2 MENU Button ( Z pg. 5) 3 Cassette Loading Slot 4 ST OP/EJECT Button ( Z pg. 10) 5 P AUSE Button ( Z pg. 1 1) OK Button ( Z pg. 5) 6 PUSH JOG Button ( Z pg. 12) 7 V ideo Input Connector ( Z pg.
41 FRONT DISPLA Y P ANEL 1 Audio Level Meter 2 T imer Mode Indicator ( Z pg. 26) 3 Instant T imer Recording Indicator ( Z pg. 25) 4 V ideo Mode Indicator ( Z pg. 5) 5 “Cassette Loaded” Mark 6 Counter Memory Mark ( Z pg. 17) 7 T ape Speed Indicators ( Z pg.
42 GENERAL Power requirement : AC 1 10 – 220 V ` , 50/60 Hz Power consumption : 21 W T emperature Operating : 5°C to 40°C (41°F to 104°F) Storage : –20°C to 60°C (–4°F to140°F) Operating position : Horizontal only Dimensions (W x H x D) : 400 x 94 x 291 mm (15-3/4" x 3-3/4" x 1 1-1/2") W eight : 3.
Ein wichtiger Punkt beim Kauf des Geräts JVC HR-J6003UM (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC HR-J6003UM noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC HR-J6003UM - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC HR-J6003UM reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC HR-J6003UM erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC HR-J6003UM besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC HR-J6003UM verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC HR-J6003UM. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC HR-J6003UM gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
