Benutzeranleitung / Produktwartung HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU des Produzenten JVC
Zur Seite of 52
EN LPT0566- 001A LPT0566- 001A LPT0566- 001A LPT0566- 001A ENGLISH CONTENTS Filename [Co v1.fm] VIDEO CASSETTE RECORDER SAFETY FIRST 2 Safety Precautions ...................... ........... 2 INDEX 4 INSTALLING YOUR NEW RECORDER 7 Basic Connections ...
Filename [HRJ480EU1.fm] Masterpage:Left 2 EN SAFETY FIRST Safety Precautions T he r ating plate and the safety cau tion are on the r ear of the unit . W ARNING: D ANGEROUS V OL T A GE INSIDE W ARNING: T O PREVENT FIRE OR SHOCK HAZARD , DO NO T EXPOSE THIS UNIT T O RAIN OR MOISTURE.
Filename [HRJ480EU1.fm] Masterpage:Right EN 3 When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allo w for ventilation (1 0 cm or more on both sid es, on top and at the rear).
Filename [HRJ480EU1.fm] Masterpage:Left 4 EN INDEX FRONT VIEW A ST ANDBY/ON 1 Button 墌 pg. 8 B Cassette Loading Slot C Rewind 3 Button 墌 pg. 14, 15 D Pla y 4 Button 墌 pg. 14 E Fa s t Fo r w a r d 5 Button 墌 pg. 14, 15 F SA T # Button 墌 pg. 28 G Ti m e r # Button 墌 pg.
Filename [HRJ480EU1.fm] Masterpage:Right EN 5 FRONT DISPLA Y P ANEL A “T imer” Indicator 墌 pg. 23, 25 B Pla y In dicator C Record Indicator D Channel/Clock Displa y 墌 pg. 11 T o switch displa y , press – –:– – . Channel position is not displa yed during playbac k.
Filename [HRJ480EU1.fm] Masterpage:Left 6 EN INDEX (cont.) REMOTE CONTROL A TV Butto n 墌 “Operati ng JVC TVs” below B TV/VCR Button 墌 pg . 19 and “Operating JVC TVs” below C REVIEW Button 墌 pg. 16 D NUMBER Keys 墌 pg. 18, 22 E VPS/PDC Button 墌 pg.
Filename [HRJ480EU1.fm] Masterpage:Right EN 7 INST ALLING Y OUR NEW RECORDER Basic Connections It’ s essential that your video recorder be properly connected. A Check the contents. Make sure the pac kage contains all of the accessories listed in “SPECIFIC A TIONS” on the bac k cov er .
Filename [HRJ480EU1.fm] Masterpage:Left 8 EN INITIAL SETTINGS Auto Set Up Auto Channel Set/Auto Clock Set/ Auto Guide Program Number Set A T urn on the recorder . Press 1 on the recorder or remote control. T he Country Set displa y appears on the TV screen.
Filename [HRJ480EU1.fm] Masterpage:Right EN 9 C Select the language. D Perform Auto Set Up. Press OK . T he A UT O SET/T-V LINK display appears on the front display panel and/or on the TV screen. On the front displa y panel Press rt to select “ Auto” and press OK or e .
Filename [HRJ480EU1.fm] Masterpage:Left 10 EN INITIAL SETTINGS (cont.) Preset Download Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Program Number Set NOTES: ● F or details, refer to the instruction manual of your TV .
Filename [HRJ480EU1.fm] Masterpage:Right EN 11 Results of Auto Set Up/Preset Download appear on the front display panel If both Au to Channel Set and A uto Clock Set hav e been performed successfully , the correct current time is displa yed.
Filename [HRJ480EU1.fm] Masterpage:Left 12 EN INITIAL SETTINGS (cont.) Language T his recorder offers y o u the c hoice to view on-screen messages in 13 different languages. T hough Auto Set Up selects the language automatically ( 墌 pg. 11 ), you can change the language setting manually as required.
Filename [HRJ480EU1.fm] Masterpage:Right EN 13 T-V LINK T-V Link Functions When you connect the recorder to your TV via a fully-wired 21-pin SC ART cable ( 墌 pg. 7), the following functions are a vailable. Y ou can use these functions only with a TV offering T-V Link, etc.
Filename [HRJ480EU1.fm] Masterpage:Left 14 EN PLA YBA CK Basic Playback A Load a cassette. Make sure the windo w side is up, the rear label side is facing you and the arrow on the front of the casset te is pointed tow ard the recorder . ● Don’ t apply too much pressure when inserting.
Filename [HRJ480EU1.fm] Masterpage:Right EN 15 Playback Features Still Picture/Frame-By-Frame Playback 1 Pause during playback. Press 9 . ● If there is vertical jitter , use the PR buttons to correct the picture. 2 Activate Frame-by-frame playback. Press 9 .
Filename [HRJ480EU1.fm] Masterpage:Left 16 EN PLA YBA CK (cont.) Manual T racking Y our video recorder is equipped with automatic tracking control. During pla yb ack, y ou can override this and adjust the tracking manually by pressing the PR buttons. 1 Override automatic tracking.
Filename [HRJ480EU1.fm] Masterpage:Right EN 17 Index Search Y our recorder automatically marks index codes at the beginning of each recording. T his function gives you quic k access to any one of 9 index codes in either direction. NOTE: Before starting, make sure the recorder is in the Stop mode.
Filename [HRJ480EU1.fm] Masterpage:Left 18 EN RECORDING Basic Recording A Load a cassette. Insert a cassette with th e record safety tab intact. ● T he recorder’ s po wer comes on automatically and the counte r is reset to 0:00:00. B Choose a programme.
Filename [HRJ480EU1.fm] Masterpage:Right EN 19 Recording Features Instant T imer Recording (ITR) T his easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished.
Filename [HRJ480EU1.fm] Masterpage:Left 20 EN RECORDING (cont.) Elapsed Recording T ime Indication 1 Display the counter . Press – –:– – so that a counter reading appears on the TV screen. 2 Reset the counter . Press 0000 before starting recording or pla yback.
Filename [HRJ480EU1.fm] Masterpage:Right EN 21 B.E.S.T . Picture System T he B . E.S.T . (Biconditional Equalised Signal T racking) system c h ec ks the condition of the tape in use during pla yback and recording, and compensates to provide the highest-possible pla yback and recording pictures.
Filename [HRJ480EU2.fm] Masterpage:Left 22 EN TIMER RECORDING S HOW V IEW ® Ti m e r Programming With the S HOW V IEW system, timer programming is greatly simplified because each TV progr amme has a correspondin g code number which y our recorder is able to recognize.
Filename [HRJ480EU2.fm] Masterpage:Right EN 23 D Set the tape speed. (HR-J480EU only) Press SP/LP ( p ). E Set the VPS/PDC mode. Press VPS/PDC to select “ON” or “OFF”. ● If “VPS/PDC ON” is display ed on the TV screen, VPS/PDC is set to ON.
Filename [HRJ480EU2.fm] Masterpage:Left 24 EN TIMER RECORDING (cont.) Express T imer Programming If you don’ t know the S HOW V IEW number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.
Filename [HRJ480EU2.fm] Masterpage:Right EN 25 F Enter the channel position. G Set the tape speed. (HR-J480EU only) Press SP/LP ( p ). H Set the VPS/PDC mode. Press VPS/PDC to select “ON” or “OFF”. ● If “VPS/PDC ON” is display ed on the TV screen, VPS/PDC is set to ON.
Filename [HRJ480EU2.fm] Masterpage:Left 26 EN TIMER RECORDING (cont.) Check, cancel and change programmes A Disengage the timer mode. Press # ( TIMER ), then press 1 . B Access the Programme Check screen. C Access the Programme screen. T o cancel or change a programme.
Filename [HRJ480EU2.fm] Masterpage:Right EN 27 When programmes overlap each other If “PROGRAM O VERLAPPED” appears, you ha ve another programme ov erlapping the programme you ha ve just made. T he Programme Check screen appears and conflicting programmes will start blinking.
Filename [HRJ480EU2.fm] Masterpage:Left 28 EN TIMER RECORDING (cont.) Automatic Satellite Programme Recording T his function allows y ou to automatically record a satellite programme whic h is timer-programmed on y our external satellite recei ver . Connect a satellite receive r to the recorder and programme the timer on the satellite receiv er .
Filename [HRJ480EU2.fm] Masterpage:Right EN 29 EDITING Edit From A Camcorder Y ou can use a camcorder as the sour ce play er and your recorder as the recorder . A Make connections. Connect the camcorder’ s AUDIO/VIDEO OUT connectors to the recorder’ s A V1 (L-1) IN/OUT or A V2 (L-2) IN/DECODER connector via a cable adapter .
Filename [HRJ480EU2.fm] Masterpage:Left 30 EN EDITING (cont.) Edit T o Or From Another Video Recorder Y ou can use y our recorder as the source play er or as the recording deck. A Make connections. Connect the pla yer’ s 21-pin SC ART connector to the recorder’ s 21-pin SC ART connector as illustrated.
Filename [HRJ480EU2.fm] Masterpage:Right EN 31 SYSTEM CONNECTIONS Connecting T o A Satellite Receiver Connect the decoder to the satellite recei ver’ s connector if you ha ve a decoder , A V1 (L-1) IN/OUT connector to TV’ s connector , and A V2 (L-2) IN/DECODER connector to the satellite recei ver’ s connector .
Filename [HRJ480EU2.fm] Masterpage:Left 32 EN SYSTEM CONNECTIONS (cont.) Connecting/Using A Decoder T he A V2 (L-2) IN/DECODER connector can be used as an input connector for an external decoder (descrambler). Simply connect a decoder and y ou can enjoy the v ariety of programming that is a vailable through scrambled channels.
Filename [HRJ480EU3.fm] Masterpage:Right EN 33 SUBSIDIARY SETTINGS S HOW V IEW ® System Setup Guide Program Number Set A Access the Main Menu screen. Press MENU . B Access the Initial Set screen. Press rt to mov e th e highlight bar (pointer) to “INITIAL SET”, then press OK or e .
Filename [HRJ480EU3.fm] Masterpage:Left 34 EN SUBSIDIARY SETTINGS (cont.) Mode Set Y ou can change various mode settings on th e Mode Set screen by followin g the procedure described below . ● F or each mode setting, see pages 35 to 37. A Access the Main Menu screen.
Filename [HRJ480EU3.fm] Masterpage:Right EN 35 * T he default setting is bold in the table below . 8 B.E.S.T . ON OFF Y ou can set the B.E.S.T . (Biconditional Equalised Signal T rac king) system to “ON” or “OFF” ( 墌 pg. 21). 8 PICTURE CONTROL AUTO : Provides the optimised picture benefits of the B.
Filename [HRJ480EU3.fm] Masterpage:Left 36 EN SUBSIDIARY SETTINGS (cont.) * T he default setting is bold in the table below . 8 AUTO SP ] LP TIMER (HR-J480EU only) ON OFF When this function is set to .
Filename [HRJ480EU3.fm] Masterpage:Right EN 37 * T he default setting is bold in the table below . 8 L-2 SELECT A/V : T o use this recorder as the recording deck with the pla yer connected to the A V2 (L-2) IN/DECODER connector , or to use the satellite receiv er connected to the A V2 (L-2) IN/DECODER connector .
Filename [HRJ480EU3.fm] Masterpage:Left 38 EN SUBSIDIARY SETTINGS (cont.) T uner Set Y our recorder needs to memorize all necessary stations in channel positions in order to record TV programmes.
Filename [HRJ480EU3.fm] Masterpage:Right EN 39 NOTES: ● Fine tuning is performed automatically during Auto Channel Set. If you w ant to perform it manually , refer to page 42. ● If you perform Auto Channel Set w hen the aer ial cable is not connected properly , “SC AN COMPLETED -NO SIGNAL-” appears on the TV screen in step 7 .
Filename [HRJ480EU3.fm] Masterpage:Left 40 EN SUBSIDIARY SETTINGS (cont.) Manual Channel Set Store channels that were not stored during Auto Set Up ( 墌 pg. 8), Preset Download ( 墌 pg. 10) or Auto Channel Set ( 墌 pg. 38). A Access the Main Menu screen.
Filename [HRJ480EU3.fm] Masterpage:Right EN 41 Delete A Channel A Select the item. Press rt w e until the item you want to delete begins blinking. B Delete a channel. Press & . ● T he item directly beneath the cancelled one moves up one line. ● Repeat steps 1 and 2 as necessary .
Filename [HRJ480EU3.fm] Masterpage:Left 42 EN SUBSIDIARY SETTINGS (cont.) Set Stations (A) Set station name s that are register ed in your recorder . A Select the item. Press rt w e until the item y ou want begins blinking. B Access the Manual Channel Set screen.
Filename [HRJ480EU3.fm] Masterpage:Right EN 43 TV Station And ID List * T he “ID” abbreviation is w hat is shown on-screen in lieu of the station name. The “ID” abbreviatio n is listed i n the Confirma tion screen and is display ed on th e TV screen when th e recorder is t uned to a d ifferent station.
Filename [HRJ480EU3.fm] Masterpage:Left 44 EN SUBSIDIARY SETTINGS (cont.) Clock Set A T urn on the recorder . Press 1 . B Access the Main Menu screen. Press MENU . C Access the Initial Set screen. Press rt to move the highlight bar (pointer) to “INITIAL SET”, then press OK or e .
Filename [HRJ480EU3.fm] Masterpage:Right EN 45 E Set the date and time. Press rt to set the time, then press OK or e . T he “D A TE” display begins blinking. Repeat the same procedure to set the date and y ear . ● When you set the time, press and hold rt to change the time by 30 minutes.
Filename [HRJ480EU3.fm] Masterpage:Left 46 EN SUBSIDIARY SETTINGS (cont.) Video Channel Set V ideo channel (RF output channel) is the c hannel on which y our TV receiv es picture and sound signals from the recorder through the RF cable. If y o u hav e connected the recor der to your TV via the A V connection ( 墌 pg.
Filename [HRJ480EU3.fm] Masterpage:Right EN 47 TROUBLESHOO TING Before requesting service for a problem, use this ch art and see if you can repair the trouble y ourself. Small problems are often easily corrected, and this can sa ve you the trouble of sending y our video recorder off for repair .
Filename [HRJ480EU3.fm] Masterpage:Left 48 EN TROUBLESHOO TING (cont.) RECORDING TIMER RECORDING SYMP TO M POSSIBLE CAUSE CORRECTIVE ACTION 1. Recording cannot be started. ● T here is no cassette loaded, or the cassette loaded has had its record safety tab removed.
Filename [HRJ480EU3.fm] Masterpage:Right EN 49 OTHER PROBLEMS SYMP TO M POSSIBLE CAUSE CORRECTIVE ACTION 1. Whistling or howling is heard from the TV during camcor der recording. ● T he camcorder’ s microphone is too close to the TV . P osition the camcorder so its microphone is aw ay from the TV .
Filename [HRJ480EU3.fm] Masterpage:Left 50 EN QU ESTIONS AND ANSWERS PLA YBACK Q. What happens if the en d of the tape i s reached during pla yback or sear ch? A. T he tape is automatically re wound to the beginning. Q. During sear ch, slo w , still and fr ame-by-f rame pla yback, I can’t hear an y audio.
Filename [HRJ480EU1IX.fm] Masterpage:Right EN 51 LIST OF TERMS A Auto Channe l Set .......... ................ ................ ..... 38 Auto Set Up ................ ................... ................ ....... 8 AUTO SP ] LP TIMER . ................ .
Filename [Co v 4.fm] Printed in Malaysia Printed in Malaysia Printed in Malaysia Printed in Malaysia 0101IYV 0101IYV 0101IYV 0101IYV * ID ID ID ID * PJ PJ PJ PJ EN SPECIFIC A TIONS GENERAL P ower requirement : A C 220 V – 240 V d , 50 Hz/60 Hz P ower c onsumption P ower on : 14 W P ower o ff : 3.
Ein wichtiger Punkt beim Kauf des Geräts JVC HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC HR-J480EU, HR-J280EU, HR-J281EU, HR-J289EU gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
