Benutzeranleitung / Produktwartung DT-V9L3DY des Produzenten JVC
Zur Seite of 46
INSTR UCTIONS DT -V9L3D MUL TI FORMA T LCD MONIT OR T ab le of Contents Safety Precautions .............................................. 2 IMPOR T ANT SAFEGU ARDS ........................... 2 Installation ............................................
2 • Do not install this product in the f ollowing places: – in a damp or dusty room – where the product is exposed to soot or steam, such as near the cooking counter or a humidifier – near heat sources – where condensation easily occurs, such as near the window • Do not place this product on an unstable cart, stand, or table .
Dear Customer , This apparatus is in conf or mance with the v alid European directives and standards regarding electromagnetic compatibility and electrical safety .
4 Installation CA UTION • Do not rest your arm on the monitor or lean against the monitor . • Do not touch the LCD panel when installing the monitor . • Be sure to install the monitor securely to prev ent the monitor from falling o ver , which ma y cause damage to the monitor or injury .
5 ENGLISH T o prevent an accidental fall Fix the monitor to a wall b y using str ings. Fixing the monitor Attach the hook (not provided) to the VESA mounting holes on the rear panel (use the two 100 mm pitch holes on the upper side) using M4 x 10 mm screws (not pro vided).
6 Daily Operations / Connections 7 Fr ont panel 8 D YNAMIC button/lamp Adjusts the picture to be suitable f or a bright place. • When the D YNAMIC lamp lights: – “BACK LIGHT” and “PICTURE SUB ADJ. ” are not display ed on the menu. – The setting of “BA CK LIGHT” is ineffectiv e.
7 ENGLISH If you press the input b utton of the current input, the status of the input signal and setting of muting are display ed for about 3 seconds . • Make the setting to displa y/hide the status in “ST A TUS DISPLA Y” of the “INFORMA TION” ( ☞ page 15).
8 7 Rear panel Daily Operations / Connections (cont.) 8 1 PO WER switc h T ur ns AC po wer on or off. • Y ou need to press button ( ☞ w on page 6) to use the monitor after turning on the POWER switch. 2 AC IN terminal AC po wer input connector . Connect the provided A C power cord to an A C outlet.
9 ENGLISH 7 A v ailable signals The follo wing signals are av ailable f or this monitor . Video signals No . Signal name Signal format shown in the status display ( ☞ page 7) Input terminal VIDEO/COMPONENT E.
10 Menu Configuration—MAIN MENU PICTURE IMPROVEMENT Setting for the picture quality Item T o do Setting value APERTURE * Select the frequency of the luminance signal compensated in “APERTURE LEVEL. ” OFF , LOW , HIGH APERTURE LEVEL * Compensate the frequency response of the luminance signal of the video signal.
11 ENGLISH Operation guide Shows the b uttons for each operation. • The menu automatically disappears in about 30 seconds after the pre vious operation. • Some items ma y not appear on the menu depending on the input or the input signal. • The items controlled b y the MAKE system do not appear on the menu.
12 Example of the level meter displa y —Le vel meter position and audio channels Ex.: When “LEVEL METER ch” is set to “8CH” and “BAR TYPE” is set to “3COLORS . ” Operation guide Shows the b uttons for each operation. • The menu automatically disappears in about 30 seconds after the pre vious operation.
13 ENGLISH WA VE FORM SETTING Settings for the w av e form monitor Item T o do Setting value POSITION Select the position of the wa ve f or m monitor . 1 (lower right), 2 (low er left), 3 (upper left), 4 (upper right) GAIN Adjust the gain lev el for the incoming w ave f orm data.
14 FUNCTION SETTING Settings for the sub men u display , color system, color of the tally lamp , and the format indicator . Item T o do Setting value sub menu POSI. Select the contents and displaying position of “sub menu. ” ☞ “NO TE” COLOR SYSTEM Select the color system.
15 ENGLISH Setting of “CHARA CTER SET . ” Assign a name for each video source . 1 Change the input to one that you want to assign a video source name f or . • Y ou cannot store different video source names f or composite signal input (VIDEO) and component signal input (COMPO .
16 External Control 7 About the external contr ol This monitor has two e xter nal control terminals. • MAKE/TRIGGER terminal (RJ-45): The f ollowing e xter nal control systems are av ailable .
17 ENGLISH 7 Using the RS-232C system Y ou can control the monitor from a personal computer etc. via the RS-232C terminal. • Consult y our dealer for the details of the e xternal control specification.
18 T roubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solve the prob lem, unplug the monitor and consult an authorized dealer or ser vice center . Symptom Probable cause and corrective action P age No power supply • Press the b utton.
19 ENGLISH 7 Self-chec k program This monitor has a self-check function, which allo ws it to detect malfunctions and aler t you. This mak es troubleshooting easier . Whene ver a prob lem occurs, one or some of the self-check lamps will flash. If this happens, f ollow the steps below and contact y our dealer to resolve the prob lem.
20 Maintenance Unplug this product fr om the wall outlet before cleaning. Screen T o avoid irreparab le change in appearance of the screen such as une ven color , discoloration, scratches , be careful about the follo wing: • Do not paste or stic k anything using any glues or adhesiv e tapes.
21 ENGLISH • F or easy understanding, pictures and illustrations are shown b y being emphasized, omitted or composed, and may be slightly diff erent from actual products.
22 Specifications (cont.) VESA mounting holes (8-M4, depth: 10 mm) 7 Dimensions Unit: mm <Front vie w> 222.4 218*/181** * at the higher position ** at the lower position 176 186 116 <Side view> <Rear view> 202 100 75 37.5 • When the stand is attached to the higher position.
INSTR UCTIONS DT -V9L3D Y MUL TI FORMA T LCD MONIT OR T able of Contents Safety Precautions .............................................. 2 IMPOR T ANT SAFEGU ARDS ........................... 2 Installation ...........................................
2 • Do not install this product in the f ollowing places: – in a damp or dusty room – where the product is exposed to soot or steam, such as near the cooking counter or a humidifier – near heat sources – where condensation easily occurs, such as near the window • Do not place this product on an unstable cart, stand, or table .
W ARNING: T O PREVENT FIRE OR SHOCK HAZARDS, DO NO T EXPOSE THIS APP ARA TUS T O RAIN OR MOISTURE. W ARNING: THIS APP ARA TUS MUST BE CONNECTED T O A MAINS SOCKET OUTLET WITH A PRO TECTIVE EAR THING CONNECTION. CA UTION: D ANGER OF EXPLOSION IF BA TTER Y IS INCORRECTL Y REPLA CED .
4 Installation CA UTION • Do not rest your arm on the monitor or lean against the monitor . • Do not touch the LCD panel when installing the monitor . • Be sure to install the monitor securely to prev ent the monitor from falling o ver , which ma y cause damage to the monitor or injury .
5 T o prevent an accidental fall Fix the monitor to a wall b y using str ings. Fixing the monitor Attach the hook (not provided) to the VESA mounting holes on the rear panel (use the two 100 mm pitch holes on the upper side) using M4 x 10 mm screws (not pro vided).
6 Daily Operations / Connections 7 Fr ont panel 8 D YNAMIC button/lamp Adjusts the picture to be suitable f or a bright place. • When the D YNAMIC lamp lights: – “BACK LIGHT” and “PICTURE SUB ADJ. ” are not display ed on the menu. – The setting of “BA CK LIGHT” is ineffectiv e.
7 If you press the input b utton of the current input, the status of the input signal and setting of muting are display ed for about 3 seconds . • Make the setting to displa y/hide the status in “ST A TUS DISPLA Y” of the “INFORMA TION” ( ☞ page 15).
8 7 Rear panel Daily Operations / Connections (cont.) 8 1 PO WER switc h T ur ns AC po wer on or off. • Y ou need to press button ( ☞ w on page 6) to use the monitor after turning on the POWER switch. 2 AC IN terminal AC po wer input connector . Connect the provided A C power cord to an A C outlet.
9 7 A v ailable signals The follo wing signals are av ailable f or this monitor . Video signals No . Signal name Signal format shown in the status display ( ☞ page 7) Input terminal VIDEO/COMPONENT E.
10 Menu Configuration—MAIN MENU PICTURE IMPROVEMENT Setting for the picture quality Item T o do Setting value APERTURE * Select the frequency of the luminance signal compensated in “APERTURE LEVEL. ” OFF , LOW , HIGH APERTURE LEVEL * Compensate the frequency response of the luminance signal of the video signal.
11 Operation guide Shows the b uttons for each operation. • The menu automatically disappears in about 30 seconds after the pre vious operation. • Some items ma y not appear on the menu depending on the input or the input signal. • The items controlled b y the MAKE system do not appear on the menu.
12 Example of the level meter displa y —Le vel meter position and audio channels Ex.: When “LEVEL METER ch” is set to “8CH” and “BAR TYPE” is set to “3COLORS . ” Operation guide Shows the b uttons for each operation. • The menu automatically disappears in about 30 seconds after the pre vious operation.
13 WA VE FORM SETTING Settings for the w av e form monitor Item T o do Setting value POSITION Select the position of the wa ve f or m monitor . 1 (lower right), 2 (low er left), 3 (upper left), 4 (upper right) GAIN Adjust the gain lev el for the incoming w ave f orm data.
14 FUNCTION SETTING Settings for the sub men u display , color system, color of the tally lamp , and the format indicator . Item T o do Setting value sub menu POSI. Select the contents and displaying position of “sub menu. ” ☞ “NO TE” COLOR SYSTEM Select the color system.
15 Setting of “CHARA CTER SET . ” Assign a name for each video source . 1 Change the input to one that you want to assign a video source name f or . • Y ou cannot store different video source names f or composite signal input (VIDEO) and component signal input (COMPO .
16 External Control 7 About the external contr ol This monitor has two e xter nal control terminals. • MAKE/TRIGGER terminal (RJ-45): The f ollowing e xter nal control systems are av ailable .
17 Operation of the external contr ol 1 Set “TYPE SEL. ” of “REMO TE SETTING” to “MAKE” or “TRIGGER” in the SET -UP MENU. 2 Shor t-circuit the 7th pin ter minal (ENABLE) to the 8th pin terminal (GND) so that the monitor can be controlled by the e xternal control.
18 T roubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solve the prob lem, unplug the monitor and consult an authorized dealer or ser vice center . Symptom Probable cause and corrective action P age No power supply • Press the b utton.
19 7 Self-chec k program This monitor has a self-check function, which allo ws it to detect malfunctions and aler t you. This mak es troubleshooting easier . Whene ver a prob lem occurs, one or some of the self-check lamps will flash. If this happens, f ollow the steps below and contact y our dealer to resolve the prob lem.
20 Maintenance Unplug this product fr om the wall outlet before cleaning. Screen T o avoid irreparab le change in appearance of the screen such as une ven color , discoloration, scratches , be careful about the follo wing: • Do not paste or stic k anything using any glues or adhesiv e tapes.
21 • F or easy understanding, pictures and illustrations are shown b y being emphasized, omitted or composed, and may be slightly diff erent from actual products.
22 Specifications (cont.) VESA mounting holes (8-M4, depth: 10 mm) 7 Dimensions Unit: mm (inch) <Front vie w> 222.4 (8 7/8) 218 (8 5/8)*/181 (7 1/4)** * at the higher position ** at the lower position 176 (7) 186 (7 3/8) 116 (4 5/8) <Side view> <Rear view> 202 (8) 100 75 37.
DT-V9L3D_J_en.indb 23 DT-V9L3D_J_en.indb 23 09.8.7 1:30:40 PM 09.8.7 1:30:40 PM.
© 2009 Victor Company of J apan, Limited 0809TKH-MW -MT DT -V9L3D Y MUL TI FORMA T LCD MONIT OR DT-V9L3D_J_en.indb 24 DT-V9L3D_J_en.indb 24 09.8.7 1:30:40 PM 09.
Ein wichtiger Punkt beim Kauf des Geräts JVC DT-V9L3DY (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC DT-V9L3DY noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC DT-V9L3DY - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC DT-V9L3DY reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC DT-V9L3DY erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC DT-V9L3DY besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC DT-V9L3DY verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC DT-V9L3DY. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC DT-V9L3DY gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
