Benutzeranleitung / Produktwartung 20981IEN des Produzenten JVC
Zur Seite of 27
INSTRUCTIONS For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet. Retain this inf or mation f or future reference . Model No . Se r ia l N o. GVT0056-008A [B] MICRO COMPONENT SYSTEM UX-V100 — Consists of CA-UXV100 and SP-UXV100.
G-1 Warnings, Cautions and Others IMPORT ANT for the U .K. DO NO T cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appro- priate safety appro ved e xtension lead or consult your dealer .
G-2 Front vie w Side view Caution: Pr oper V entilation T o av oid risk of electric shock and fire, and to pre vent damage , locate the apparatus as f ollows: 1 Front: No obstructions and open spacing. 2 Sides/ T op/ Bac k: No obstructions should be placed in the areas shown by the dimensions below .
G-3 SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
1 Thank you for purchasing the JVC Micro Component System. W e hope it will be a valued addition to your home, gi ving you years of enjoyment. Be sure to read this instruction manual carefully before operating your new stereo system. In it you will f ind all the information you need to set up and use the system.
2 Getting Star ted Accessories Make sure that you ha ve all of the follo wing items, which are supplied with the System. A C Po wer Cord (1) AM Loop Antenna (1) Remote Control (1) Batteries (2) FM W ire Antenna (1) If any of these items are missing, contact your dealer immediately .
3 CAUTION: Make all connections before plugging the System into an AC power outlet. Connecting the FM Antenna AM EXT AM LOOP FM (75 Ω ) COAXIAL ANTENNA T urn the loop until you hav e the best reception. CAUTION: T o avoid noise, keep antennas away fr om the System, the connecting cor d and the AC power cord.
4 CAUTION: Make all connections before plugging the System into an AC power outlet. Connecting the Speakers For each speaker , connect one end of the speak er wire to the speaker terminals on the back of the System. 1. Open each of the terminals and insert the speak er wires firmly , then close the terminals.
5 Connecting the AC Power Cor d Firmly insert the supplied A C po wer cord into the A C inlet on the back of the Unit. CAUTIONS: • ONL Y USE JVC POWER CORD PROVIDED WITH THIS SYSTEM TO A VOID MALFUNCTION OR DAMAGE TO THE SYSTEM.
6 Common Operations Adjusting the V olume Press the V OLUME + b utton to increase the volume or press the V OLUME – button to decrease it. Y ou can adjust the volume lev el between 0 and 40.
7 Showing the Clock Time In Standby mode, the digital clock appears on the display . When the System is turned on, you can display the digital clock any time. T o display the digital c lock, press the CLOCK b utton on the Unit or DISPLA Y button on the Remote Control.
8 Using the T uner FM mode indicators OR ■ Preset T uning using the Remote Control (P ossible only after presetting stations) Select the desired preset number using the UP , DO WN, > or < button on the Remote Control. After 1 second the display will show the preset number’ s band and frequency .
9 4 Press the UP , DOWN, >, or < button within 5 seconds to select the preset number . UP or > button: Increases the preset number by 1. DO WN or < button: Decreases the preset number by 1. • When the > or < button is held do wn, the preset number changes rapidly .
10 Using the CD Player > CD #¥8 CANCEL SET UP ¢ 7 < PROGRAM 4 CD 0 REPEA T RANDOM REMOTE CONTROL RM-SUXV10E CANCEL TREBLE FM/AM FM MODE DISPLAY SLEEP AUX TAPE CD CD BASS AHB PRO DOWN RANDOM UP AUTO PRESET REPEAT SET PROGRAM VOLUME Y ou can use Normal, Random, Program or Repeat Play .
11 4 Pr ess the PROGRAM button. The System enters the programing mode and the PR OGRAM indicator lights up. 5 Pr ess the > or < button to select the track to program. > button: Increases the track number by 1. < button: Decreases the track number by 1.
12 Playing at Random The tracks will play in no particular order when you use this mode. Press the RANDOM button on the Remote Control. The RANDOM indicator lights up on the display , and tracks will be played in random order .
13 AUTO REVERSE AUTO TAPE SELECTOR TAPE Using the Cassette Deck (Listening to a T ape) T APE @ # 4 7 ¢ REV . MODE When the System is in use, the display sho ws other items as well. For simplicity , only the items described in this section are shown here.
14 Using the Cassette Deck (Recor ding) When the System is in use, the display sho ws other items as well. For simplicity , only the items described in this section are shown here.
15 One track r ecording –––––––––––––––––– 1 Insert a blank or erasable tape into the Cassette Deck. 2 Play the track on the CD you wish to recor d. 3 Pr ess the REC button on the Unit. The CD player returns to the beginning of that track and the track is recorded on the tape.
16 Using Exter nal Equipment Listening to External Equipment Y ou can connect an audio equipment — used only as a playback device. ■ First make sure that the e xternal equipment is properly connected to the System. (See page 4.) 1 Set the VOLUME control to the minimum position.
17 Using the Timers The timers let you control listening and recording functions automatically . Setting the Clock • When you plug the A C po wer cord into the wall outlet, the CLOCK indicator flashes on the display . Y ou can set the clock whether the System is on or of f.
18 4 Select the music sour ce. 1. Press the TIMER button on the Unit. “TUNER” flashes on the display . 2. Press the ¢ or 4 b utton to select the music source you want to listen to. The display changes as sho wn below . 5 Set the volume level. 1. Press the TIMER button on the Unit.
19 Setting the Sleep Timer When a source is playing, use the Sleep Timer to turn the System of f after a certain number of minutes. By setting the Sleep T imer , you can fall asleep to music and kno w that your System will turn of f by itself rather than play all night.
20 • If there are f ingerprints, etc. on the lens, gently wipe clean with a cotton swab . Moisture Condensation Moisture may condense on the lens inside the System in the following cases: • After .
21 • If you are having a problem with y our System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints gi ven here, or the System has been physically damag ed, call a qualified person, such as your dealer , for service.
22 Specifications UX-V100 (CA-UXV100 and SP-UXV100) Amplifier Output Po wer 44 W (22 W + 22 W) at 4 Ω (Max.) 40 W (20 W + 20 W) at 4 Ω (10% THD) Input Sensitivity/Impedance (1 kHz) LINE IN (A UX) .
VICT OR COMP ANY OF JAP AN, LIMITED EN 1200MWMMD WJEM COVER.UX-V100[B]f 12/12/00, 12:35 PM 2.
Ein wichtiger Punkt beim Kauf des Geräts JVC 20981IEN (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC 20981IEN noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC 20981IEN - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC 20981IEN reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC 20981IEN erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC 20981IEN besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC 20981IEN verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC 20981IEN. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC 20981IEN gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
