Benutzeranleitung / Produktwartung dv9000 des Produzenten HP
Zur Seite of 300
Main tenan ce and Ser vice Gu id e HP P a v ili on d v9 000 Notebook P C Doc ument P art Number: 4 1 7 6 1 5-003 Apr il 200 7 This guide is a troubleshooting reference used for maintaining and servicing the computer .
© Copyright 2006, 2007 He wlett-P ackard Dev elopment Company , L.P . Microsoft, W indo ws, and W indo ws V ista are either trademarks or registered trademarks of Microsoft Cor poration in the United States and/or other countries.
Saf ety w arn ing no tice Å WA R N I N G : T o r educe the possib ilit y of heat-related inj uri es or of o ve rheating the comput er , do not plac e the computer dir ectly on y our lap or obstru ct the computer air ve nt s. Use the com puter only on a har d, flat surface .
Maintenance and S ervi ce Guide i v Cont ent s 1 Product Description 1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 1.2 Resetting the Computer . . . . . . . . . . . . . . . . . . . . . . . 1–4 1.3 Power Management .
v Mainte nance and Servi ce Guide Cont en ts 3 Illustrated Parts Catalog 3.1 Serial Number Location . . . . . . . . . . . . . . . . . . . . . . 3–1 3.2 Computer Major Components . . . . . . . . . . . . . . . . . . 3–2 3.3 Display Assembly Components .
Cont en ts Maintenance and S ervi ce Guide v i 5 Removal and Replacement Procedures 5.1 Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2 5.2 Disassembly Sequence Chart . . . . . . . . . . . . . . . . . . 5–2 5.3 Preparing the Computer For Disassembly .
v ii Mainte nance and Servi ce Guide Cont en ts 6 Specifications AS c r e w L i s t i n g B Backup and Recovery in Windows XP C Backup and Recovery in Windows Vista D Display Component Recycling E Con.
Maintenance and S ervi ce Guide 1–1 1 Pr odu c t De sc ript ion The HP Pa vilion dv9000 Notebook PC offers adv anced modularity , Intel® Core™ Duo processors, and extensi ve multimedia support.
1–2 Mainte nance and Serv ice Gui de Pr oduct Desc riptio n 1. 1 F e a t u r e s ■ The follo wing processors are av ailable, varying b y computer model: ❏ Intel Core Duo T7200 (2.00-GHz) ❏ Intel Core Duo T5600 (1.83-GHz) ❏ Intel Core Duo T5500 (1.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–3 ■ Integrated 10/100/1000 Gig abit Ethernet local area network (LAN) network interf ace card (NIC) with RJ-45 jack, v arying by computer model ■ Integrated high-speed 56K modem with RJ-11 jack ■ Integrated wireless support for Mini Card IEEE 802.
1–4 Mainte nance and Serv ice Gui de Pr oduct Desc riptio n 1 .2 Reset ting t h e Com pu ter If the computer you are servicing has an unkno wn password, follo w these steps to clear the password. These steps also clear CMOS: 1. Prepare the computer for disassembly (refer to Section 5.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–5 1. 3 P o w e r M a n a g e m e n t The computer comes with po wer management features that extend battery operating time and conserv e power .
1–6 Mainte nance and Serv ice Gui de Pr oduct Desc riptio n 1 .4 Exter nal C om ponen ts The external components on the front of the computer are sho wn belo w and described in T able 1-1. F ront Components Ta b l e 1 - 1 Fr ont Components Item Component Function 1 P ow er light On: The computer is on.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–7 3 Drive light Blinking: The hard drive or optical drive is being accessed. 4 Wireless s witch T urns the wire less feature on or off , but does not create a wireless connection. ✎ A wireless network must be set up in order to establish a wireless connection.
1–8 Mainte nance and Serv ice Gui de Pr oduct Desc riptio n The external components on the left side of the computer are sho w n belo w and described in T able 1-2. Lef t -S ide Com po ne nt s Ta b l e 1 - 2 Left-Side Components Item Component Function 1 Security cable slot Attaches an op tional security cable to the computer .
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–9 4 Expansion por t 3 Connects t he computer to an optional e xpansion product. ✎ The computer has only one expansion port. The term expansion port 3 describes the type of expansion port. 5 RJ-45 (network) jack Connects a network cable .
1–1 0 Maintenance and S ervi ce Guide Pr oduct Desc riptio n The external components on the right side of the computer are sho w n belo w and described in T able 1-3.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–1 1 Ta b l e 1 - 3 Right-Side Components Item Component Function 1 USB por ts (2) Connect optional USB de vices. 2 ExpressCard slot Suppor ts opti onal ExpressCard/54 cards. 3 Optical drive Reads an optical disc.
1–1 2 Maintenance and S ervi ce Guide Pr oduct Desc riptio n The computer ke yboard components are shown belo w and described in T able 1-4. Ke y b o a r d C o m p o n e n t s.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–1 3 T able 1-4 Ke yboard Components Item Component Function 1 Function ke ys Ex ecute frequen tly used system functions when pressed in combination with the fn key . 2 caps lock ke y Enables caps loc k and tur ns on the caps loc k light.
1–1 4 Maintenance and S ervi ce Guide Pr oduct Desc riptio n The computer top components are sho wn below and described in T able 1-5. T op Compone nts, P ar t 1.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–1 5 Ta b l e 1 - 5 T op Components, P ar t 1 Item Component Function 1 Integr ated camera (select models only) Records video and capt ures still photos. 2 Inter nal microphones (2, select models only) Record sound.
1–1 6 Maintenance and S ervi ce Guide Pr oduct Desc riptio n The computer top components are sho wn below and described in T able 1-6. T op Compone nts, P ar t 2.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–1 7 Ta b l e 1 - 6 T op Components, P ar t 2 Item Component Function 1 Media b utton If QuickPla y is not installed and the computer is ■ On, opens the music progr am or Media menu, which allo ws you to select a multimedia progr am.
1–1 8 Maintenance and S ervi ce Guide Pr oduct Desc riptio n 3 Pre vious/rewind bu tt o n When a disc is pla ying in the optical dr iv e: ■ Pla ys the previous tr ack or chapter , when pressed once. ■ Re winds when pressed with the fn key . 4 Pla y/pause bu tton When a disc is in the optical drive and is ■ Not pla ying, pla ys the disc.
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–1 9 The computer T ouchPad components are sho wn below and described in T able 1-7. To u c h Pa d C o m p o n e n t s Ta b l e 1 - 7 T ouchpad Components Item Component Function 1 T ouchP ad light Blue: T ouchP ad is enabled.
1–20 Maintenance and S ervi ce Guide Pr oduct Desc riptio n The external components on the bottom of the computer are sho w n belo w and described in T able 1-8. Bot tom Component s Ta b l e 1 - 8 Bottom Components Item Component Function 1 Batter y bay Holds the batter y .
Pr oduct Desc ripti on Maintenance and S ervi ce Guide 1–2 1 3 Optical dr iv e Reads an optical disc. 4 Secondar y hard dr ive ba y Holds an optional secondar y hard drive. Primar y hard dr iv e ba y Hold the primar y hard dr ive . 5 V ents (6) Enable airflo w to cool inter nal components.
1–2 2 Maintenance and S ervi ce Guide Pr oduct Desc riptio n 1. 5 D e s i g n o v e r v i e w This section presents a design ov erview of k ey parts and features of the computer . Refer to Chapter 3, “Illustrated Parts Catalog, ” to identify replacement parts, and Chapter 5, “Remo v al and Replacement Procedures, ” for disassembly steps.
Maintenance and S ervi ce Guide 2–1 2 T roubl es hooting Å WA R N I N G : Only au thori z ed techni ci ans tr ained b y HP should re pair this equipmen t . All tr oubleshooting and r e pair pr ocedures ar e detailed to allo w only subas sembl y-/module -lev el repair .
2–2 Mainte nance and Serv ice Gui de T r oubles hooting 1. T o open the Setup Utility , turn on or restart the computer in W indo ws, and then press f10 while the prompt, “Press <F10> to enter setup, ” is displayed in the lo wer-left corner of the screen.
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–3 1. T o start the Setup Utility , turn on or restart the computer in W indo ws, and then press f10 while the prompt, “Press <F10> to enter setup, ” is displayed in the lo wer-left corner of the screen.
2–4 Mainte nance and Serv ice Gui de T r oubles hooting Using Adv a nced Setu p U tilit y F eatures This guide describes the Setup Utility features recommended for all users.
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–5 ■ T o close the Setup Utility without saving your changes from the current session: If the Setup Utility menus are not visible, press esc to return to the menu display . Then us e the arro w ke ys to select Exit > Exit Discarding Changes , and then press enter .
2–6 Mainte nance and Serv ice Gui de T r oubles hooting Securi t y Me nu S y stem C onfiguration Men u Ta b l e 2 - 2 Security Menu Select T o Do This Administrator pass word Enter , chan ge, or delete an administr ator pass word. P ow er-on pass word Enter , change, or delete a po wer-on pass word.
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–7 Dia gnos tic s Men u Boot Options Set the f o llowing boot options: ■ f10 and f12 Dela y (sec.)—Set the delay f or the f10 and f12 functions of the Setup Utility in inter v als of 5 seconds each (0, 5, 10, 15, 20).
2–8 Mainte nance and Serv ice Gui de T r oubles hooting 2.2 Setup Utilit y in Wind o w s Vista The Setup Utility is a R OM-based information and customization utility that can be used e ven when your W indo ws® operating system is not working or will not load.
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–9 5. T o set your preferences and exit the Setup Utility , press f10 and then follo w the instructions on the screen. Y our preferences go into effect when the computer restarts in W indo ws.
2–1 0 Maintenance and S ervi ce Guide T r oubles hooting Restoring Default Settin gs in t he Setu p Utilit y The follo wing procedure explains ho w to restore the Setup Utility default settings. If the Setup Utility is not already running, be gin at step 1.
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–1 1 The “Press <ESC> to change boot order” message that is displayed in the lo wer-left corner of the screen each time the computer is started or restarted in W indo ws is the prompt to change the boot order .
2–1 2 Maintenance and S ervi ce Guide T r oubles hooting Main Menu Securi t y Me nu S y stem C onfiguration Men u Ta b l e 2 - 1 Main Menu Select T o Do This System Inf o rmation ■ Vie w and change the system time and date. ■ Vie w identification information about the computer .
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–1 3 Boot Options Set the f o llowing boot options: ■ f10 and f12 Dela y (sec.)—Set the delay f or the f10 and f12 functions of the Setup Utility in inter v als of 5 seconds each (0, 5, 10, 15, 20).
2–1 4 Maintenance and S ervi ce Guide T r oubles hooting Dia gnos tic s Men u Ta b l e 2 - 4 Diagnostics Men u Select T o Do This Hard Disk Self T est Run a comprehens iv e self-test on the hard drive . ✎ On models with two hard drives, this menu option is called the Primary Hard Disk Self Test.
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–1 5 2. 3 T roub leshooting Flo wc h arts Ta b l e 2 - 5 T roub leshooting Flowc har ts Overview Flowchart Description 2.1 “Flowchar t 2.1—Initial T roub leshooting” 2.2 “Flowchar t 2.
2–1 6 Maintenance and S ervi ce Guide T r oubles hooting Flowchart Description 2.14 “Flowchar t 2.14—No OS Loading, Optical Drive” 2.15 “Flowchar t 2.15—No A udio , P ar t 1” 2.16 “Flowchar t 2.16—No A udio , P ar t 2” 2.17 “Flowchar t 2.
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–1 7 Flo wc har t 2. 1—Initial T roubleshooting Connecting to network or modem? Begin troubleshooting. Is there power? Is the OS loading? Is there video? (no boot) Is there sound? Beeps, LEDs, or error messages? Keyboard/ pointing device working? Go to “Flowchar t 2.
2–1 8 Maintenance and S ervi ce Guide T r oubles hooting Flo wc har t 2.2—N o P o w er , P ar t 1 1. Reseat the power cables in the docking device and at the AC outlet. 2. Ensure the AC power source is active. 3. Ensure that the power strip is working.
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–1 9 Flo wc h art 2.3—No P o wer , P ar t 2 Continued from “Flowchar t 2.2—No P ower , Pa r t 1 . ” Visually check for debris in batter y socket and cl ean if necessary . Done N Y Po we r on ? Check batter y by recharging it, moving it to another computer , or replacing it.
2–20 Maintenance and S ervi ce Guide T r oubles hooting Flo wc har t 2.4—N o P o w er , P ar t 3 Continued from “Flowchart 2.3—No P ower , Pa r t 2 . ” Reseat AC adapter in computer and at po wer sou rce. Internal or external AC adapter? Done Done Done Done Po we r on ? Po we r on ? Po we r on ? Plug directly into AC outlet.
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–2 1 Flowc h ar t 2. 5—N o P ow er , P ar t 4 Y N Continued from “Flowchar t 2.4—No P ower , Pa r t 3 . ” Reseat loose components and boards and replace damaged items. Open computer .
2–2 2 Maintenance and S ervi ce Guide T r oubles hooting Flo wc har t 2.6—N o Video, P ar t 1 A N Stand-alone or docking device? No video. Replace the following one at a time. T est after each replacement. 1. Cable between computer and computer display (if applicable) 2.
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–2 3 Flo wc har t 2.7—N o Video, P ar t 2 Y N Continued from “Flowchart 2.6—No Video , Pa r t 1 .
2–2 4 Maintenance and S ervi ce Guide T r oubles hooting F lo wch art 2 . 8— No nf un cti on in g D o ck i ng De v ic e (i f applic able) Y N Reseat power cord in docking device and power outlet. N Check voltage setting on docking device. Reset monitor cable connector at docking device.
Tr o u b l e s h o o t i n g Maintenance and S ervi c e Guide 2–2 5 Flo wc har t 2.9—N o Opera ting S y s tem (OS) Loadin g No OS loading from hard drive, go to “Flowchart 2.10—No OS Loading, Hard Drive , P a r t 1. ” Reseat power cord in docking device and power outlet.
2–2 6 Maintenance and S ervi ce Guide T r oubles hooting Flo wc har t 2. 1 0—No OS Loa ding , H ard Driv e, Pa r t 1 Go to “Flowchart 2.17—Nonfunctioning De vice. ” Y Done N OS not loading from hard drive. Nonsystem disk message? Go to “Flowchar t 2.
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–2 7 Flo wc har t 2. 1 1—No OS Loa ding , H ard Driv e, Pa r t 2 Load OS using Operating System disc (if applicable). Continued from “Flowchar t 2.10—No OS Loading, Hard Drive, P ar t 1.
2–2 8 Maintenance and S ervi ce Guide T r oubles hooting Flo wc har t 2. 1 2—No OS Loadin g , Hard Driv e, Pa r t 3 Y System files on hard drive? Continued from “Flowchar t 2.11—No OS Loading, Hard Drive, P ar t 2. ” Clean virus. Done N Install OS and reboot.
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–29 Flo wc har t 2. 1 3—No OS Loa din g, Disk et te Driv e Replace the following components individually , retesting after each replacement: ■ Diskette drive ■ System board Done Y N Reseat diskette drive.
2–30 Maintenance and S ervi ce Guide T r oubles hooting Flo wc har t 2. 1 4—N o OS Loadin g, O ptical Driv e Y Done N Bootable disc in drive? Disc in drive? No OS loading from CD-ROM or DVD-ROM drive. Install bootable disc and reboot computer . Go to “Flowchar t 2.
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–3 1 Flo wc h art 2. 1 5—No Audio, P ar t 1 No audio. N Computer in docking device (if applicable)? Internal audio? Audio? Done Undock Audio? Done T urn up audio internally or externally .
2–3 2 Maintenance and S ervi ce Guide T r oubles hooting Flo wc har t 2. 1 6—No Audio, P art 2 YN Continued from “Flowchart 2.15—No A udio , Pa r t 1 . ” Reload audio drivers. Audio driver in OS configured? Audio? Y Y Y N N N Correct drivers for application? Connect to external speaker .
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–33 Flo wc har t 2. 1 7—Nonfun c tioning De vice Done Any physical device detected? Y N Unplug the nonfunctioning device from the computer and inspect cables and plugs for bent or broken pins or other damage.
2–3 4 Maintenance and S ervi ce Guide T r oubles hooting Flo wc har t 2. 1 8—Nonfunc tioning K e yboard Y N Keyboard operating properly? Keyboard not operating properly . External device works? Replace system board. Replace system board. Connect computer to good external keyboard.
Tr o u b l e s h o o t i n g Maintenance and S ervi ce Guide 2–35 Flo wc har t 2. 1 9—N onfunc tioning P ointing De vice Y N Pointing device not operating properly . External device works? Replace system board. Replace system board. Connect computer to good external pointing device.
2–3 6 Maintenance and S ervi ce Guide T r oubles hooting Flo wc har t 2.20—No N et w ork/Modem Conn ectio n Y Disconnect all power from the computer and open. No network or modem connection. N Done Digital line? Network or modem jack active? Replace jack or have jack activated.
Maintenance and S ervi ce Guide 3–1 3 I llus trated P ar ts C a tal og This chapter provides an illustrated parts breakdo wn and a reference for spare part numbers and option part numbers.
3–2 Mainte nance and Serv ice Gui de Illustrated P ar ts Catal og 3.2 Com pu ter Major C ompon ents Com pu te r M a jor Co mp on en ts.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–3 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components Item Description Spare P a rt Number 1 Display assemb lies (include wireless antenna transceiv ers and cab les) F or use with full-featured computer models (includes camera, camer a cab le, and microphones): 17.
3–4 Mainte nance and Serv ice Gui de Illustrated P ar ts Catal og Com pu te r M a jor Co mp on en ts.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–5 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare P a rt Number 5 Ke yboards F or use in the f.
3–6 Mainte nance and Serv ice Gui de Illustrated P ar ts Catal og Com pu te r M a jor Co mp on en ts.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–7 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare P a rt Number 10 Wireless switc h board (inc.
3–8 Mainte nance and Serv ice Gui de Illustrated P ar ts Catal og Com pu te r M a jor Co mp on en ts.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–9 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare P a rt Number 15 Processor s (include thermal pad) Intel Core Duo T7200 (2.00-GHz) Intel Core Duo T5600 (1.
3–1 0 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og Com pu te r M a jor Co mp on en ts.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–1 1 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare P a rt Number 21 Base enclosures (include .
3–1 2 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og Com pu te r M a jor Co mp on en ts.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–1 3 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare P a rt Number 25 Mini Card modules 802.11a/b/g WLAN Mini Card module f or use in the countries or regions listed below .
3–1 4 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og Com pu te r M a jor Co mp on en ts.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–1 5 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare P a rt Number 25 Mini Car d modules (Continued) 802.11a/b/g WLAN Mini Card module f or use in the countries or regions listed below .
3–1 6 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og Com pu te r M a jor Co mp on en ts.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–1 7 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare P a rt Number 25 Mini Car d modules (Continued) F or use only with models using AMD processors: 802.
3–1 8 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og Com pu te r M a jor Co mp on en ts.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–1 9 Ta b l e 3 - 1 Spare P ar ts: Computer Major Components (Continued) Item Description Spare P a rt Number 27 Optical drives (include b.
3–20 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og 3 .3 Displa y Asse mbl y Co mpon ent s Displa y Assembl y Com ponents T able 3-2 Displa y Assembl y Components Spare P ar t Number I.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–2 1 2 Display Hinge Kit (includes left and right displa y hinges) F o r use with Dual Lamp displa y panels F o r use with Single Lamp dis.
3–2 2 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og 3. 4 M as s Storage De vices Mass S tor age Dev ice s T able 3-3 Mass Storage De vices Spare P ar t Number Information Item Descrip.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–2 3 1 Har d drives (Continued) Hard drive Br ack et Kit (n ot illustrated) 434106-001 Hard drive br ack et rails (APD on ly) (not illustr.
3–2 4 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og 3.5 Pl a s t i c s K i t P lastics K it Com ponents.
Illustrated P arts Catalog Maintenance and S ervi c e Guide 3–2 5 T able 3-4 Plastics Kit Spare P ar t Number Information Item Description Spare P ar t Number Plastics Kit 432981-001 1 2 3 4 Include.
3–2 6 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og 3.6 C a b l e K i t Cable K it Co mponents.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–2 7 T able 3-5 Cable Kit Spare P ar t Number Information Item Description Spare P ar t Number Cable Kit 434677-001 1 2 3 4 5 Includes: A .
3–2 8 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og 3.7 Miscell aneous Ta b l e 3 - 6 Spare P ar ts: Miscellaneous Description Spare P ar t Number AC a d a p t e r s HP 90-W PFC A C a.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–29 HP Remote Contr ol 435743-001 Remote control, ExpressCar d 439128-001 TV tuner , ExpressCar d 439130-001 TV tuner antenna 439131-001 W.
3–30 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og Screw Kit (include the f ollowing scre ws; refer to Appendix A, “Scre w Listing, ” for more inf or mation on screw specification.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–3 1 3.8 Sequ enti al P ar t N umber Listin g T able 3-7 Spare P ar ts: Sequential P ar t Number Listing Spare P ar t Number Description 3.
3–3 2 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og 407159-002 802.11a/b/g WLAN Mini Card module f or use in the countries and regions listed below: China Ecuador Haiti Honduras P akistan Pe r u Qatar South K orea Uruguay V enezuela 407160-001 802.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–33 Spare P ar t Number Description 407674-002 802.11a/b/g WL AN Mini Card module f or use in the MOW2 countries and regions listed below:.
3–3 4 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og Spare P ar t Number Description 408479-001 TV tuner remote control 408483-001 USB infrared receiv er 408485-001 RF cab le 412175-00.
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–35 Spare P ar t Number Description 432948-001 17.0-inch, WXGA+, TFT Dual Lamp displa y assembly with BrightView f or use with full-featured computer models (includes camera, camera cab l e, microphones, wireless antenna transceiv ers, and cables) 432949-001 17.
3–3 6 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og Spare P ar t Number Description 432961-001 Microphones 432962-001 Displa y Cable Ki t (includes camera cab le) 432963-001 Displa y .
Illustrated P arts Catalog Maintenance and S ervi ce Guide 3–3 7 432980-001 Base enclosure f o r use on ly with computer models using AMD processors 432981-001 Plastics Kit 432983-001 Escrow Kit f o.
3–3 8 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og 434106-001 Hard Drive Brac ket Kit 434659-001 G73M system board (inc ludes 256-MB of video RAM and ther mal pad) 434660-001 G73 sys.
Illustrated P arts Catalog Maintenance and S ervi c e Guide 3–3 9 Spare P ar t Number Description 436067-001 Displa y bezel f or use with Single Lamp displa y panels without camera 436068-001 Displa y bezel f or use with Dual Lamp displa y panels without camera 436069-001 IAMD T urion ML-60 2.
3–40 Maintenance and S ervi ce Guide Illustrated P ar ts Catal og Spare P ar t Number Description 439129-001 Infrared emitter 439130-001 TV tuner , ExpressCard 439131-001 TV tuner antenna 439254-001.
Maintenance and S ervi ce Guide 4–1 4 Remo v al an d Repl a cement Preliminaries This chapter provides essential information for proper and safe remov al and replacement service.
4–2 Mainte nance and Serv ice Gui de Re mo val and R eplacement Pr eliminar ies 4.2 Ser vice C onsid erations The follo wing sections include some of the considerations that you should keep in mind during disassembly and assembly procedures.
Re mo val and R eplacement Pr eliminari es Maintenance and S ervi ce Guide 4–3 4.3 Pre v entin g Dam a ge to R emo v able Dri v e s Remov able dri ves are fragile components that must be handled with care.
4–4 Mainte nance and Serv ice Gui de Re mo val and R eplacement Pr eliminar ies 4.4 Pre v entin g Elec trosta tic D ama ge Many electronic components are sensiti ve to electrostatic dischar ge (ESD). Circuitry design and structure determine the degree of sensiti vity .
Re mo val and R eplacement Pr eliminari es Maintenance and S ervi ce Guide 4–5 4.5 P a c k agin g and T ranspor tin g Precautions Use the follo wing grounding precautions when packaging and transporting equipment: ■ T o av oid hand contact, transport products in static-safe containers, such as tubes, bags, or boxes.
4–6 Mainte nance and Serv ice Gui de Re mo val and R eplacement Pr eliminar ies 4.6 W orks tation Precau tions Use the follo wing grounding precautions at workstations: ■ Cov er the workstation with approv ed static-shielding material (refer to T able 4-2, “Static-Shielding Materials” ).
Re mo val and R eplacement Pr eliminari es Maintenance and S ervi ce Guide 4–7 4.7 G rounding E quip men t and Methods Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ■ When seated, wear a wrist strap connected to a grounded system.
4–8 Mainte nance and Serv ice Gui de Re mo val and R eplacement Pr eliminar ies T able 4-1 shows ho w humidity af fects the electrostatic v oltage le vels generated by dif ferent acti vities. T able 4-2 lists the shielding protection provided b y antistatic bags and floor mats.
Maintenance and S ervi ce Guide 5–1 5 Remo v al an d Repl a cement Pr ocedure s This chapter provides remo val and replacement procedures. There are as many as 109 scre ws, in 11 dif ferent sizes, that must be remov ed, replaced, or loosened when servicing the computer .
5–2 Mainte nance and Serv ice Gui de Re mo val and R eplacement Pr ocedures 5 . 1 Seri al N umber Report the computer serial number to HP when requesting information or ordering spare parts. The serial number is located on the bottom of the computer .
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–3 Section Description # of Screws Remo ved 5.4 Hard Drive 2 loosened to remov e each hard drive co ver 4 remov ed to disassemble each hard drive 5.5 Computer F e et 0 5.6 Memor y Module 2 loosened to remov e the memor y module compar tment cov er 5.
5–4 Mainte nance and Serv ice Gui de Re mo val and R eplacement Pr ocedures Section Description # of Screws Remo ved 5.14 Displa y Assemb ly Displa y bezel Camera module Displa y in v er ter Displa y panel Displa y hinges Displa y hinge cov ers Wireless antenna transceiv ers Microphones Camera cab le 6 5 0 0 6 4 0 4 0 0 5.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–5 5 .3 Preparing t he C om puter For Di sassem bl y Before you begin an y remov al or installation procedures: 1.
5–6 Mainte nance and Serv ice Gui de Re mo val and R eplacement Pr ocedures b . Slide and hold the battery release latch 1 to the left. (The front edge of the battery disengages from the computer .) c. Lift the front edge of the battery 2 and swing it back.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–7 5 .4 Hard Driv e Har d Drive Spare P ar t Number Information Har d drives (include brac ket and connector) F o r use only .
5–8 Mainte nance and Serv ice Gui de Re mo val and R eplacement Pr ocedures 1. Prepare the computer for disassembly (refer to Section 5.3 ). 2. Loosen the two capti ve Phillips PM2.0×5.0 scre ws 1 that secure each hard dri ve cov er to the computer .
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–9 5. Use the mylar tab 1 to lift the hard dri ve 2 until it disconnects from the computer .
5–1 0 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 7. Remov e the four Phillips PM3.0×3.0 screws 1 that secure the hard dri ve brack et to the hard dri ve. 8. Lift the bracket 2 straight up to remo ve it from the hard dri ve.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–1 1 5. 5 C o m p u t e r F e e t The computer feet are adhesi ve-backed rubber pads. The feet are included in the Rubber Feet Ki t, spare part number 432982-001. The feet attach to the base enclosure in the locations illustrated belo w .
5–1 2 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5 .6 Memor y Module 1. Prepare the computer for disassembly (refer to Section 5.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–1 3 2. Loosen the two capti ve Phillips PM2.0×5.0 scre ws 1 that secure the memory module compartment cov er to the computer . 3. Lift the front of the memory module compartment cov er 2 , and then swing it back.
5–1 4 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5. Spread the retaining tabs 1 on each side of the memory module socket to release the memory module. (The edge of the module opposite the socket rises a way from the computer .
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–1 5 5. 7 R TC B a t t e r y 1. Prepare the computer for disassembly (refer to Section 5.3 ). 2. Remov e the memory module compartment cover ( Section 5.6 ). 3. Disconnect the R TC battery cable 1 from the system board.
5–1 6 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5 .8 M ini Ca rd Module Mini Car d Module Spare P ar t Number Information F or use only with models using Intel processors: 802.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–1 7 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the memory module compartment cover ( Section 5.
5–1 8 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 3. Make note of which wireless antenna cable is attached to which antenna clip on the Mini Card module before disconnecting the cables. Then disconnect the cables 1 from the module.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–1 9 5 .9 Opti cal Driv e 1. Prepare the computer for disassembly ( Section 5.
5–20 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 2. Remov e the Phillips PM2.5×8.0 screw 1 that secures the optical dri ve to the computer . 3. Insert a thin tool, such as a paper clip 2 , into the media tray release hole.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–2 1 6. Position the optical dri ve with the optical dri ve bracket to ward you. 7. Remov e the two Phillips PM2.0×3.0 scre ws 1 that secure the optical dri ve brack et to the optical dri ve.
5–2 2 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5. 1 0 Swi t c h C ove r 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Close the computer . 3. T urn the computer upside do wn with the front panel to ward you.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–2 3 5. T urn the computer display-side up with the front to ward you. 6. Open the computer as far as possible. 7. Lift the rear edge of the switch cov er and swing it forward until it rests on the ke yboard.
5–2 4 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 8. Release the zero insertion force (ZIF) connector 1 to which the LED board cable is connected and disconnect the cable 2 from the LED board. 9. Remov e the switch cov er .
R emo val and R eplacement Pr ocedur es Maintenance and S ervi c e Guide 5–2 5 5. 1 1 K eyb o a r d 1. Prepare the computer for disassembly ( Section 5.
5–2 6 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 3. Remov e the Phillips PM2.5×7.0 screw that secures the ke yboard to the computer .
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–2 7 4. T urn the computer display-side up with the front panel to ward you. 5. Open the computer as far as possible. 6. Remov e the three silver Phillips PM2.5×5.0 scre ws that secure the ke yboard to the computer .
5–2 8 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 7. Lift the rear edge of the ke yboard 1 until it rests at an angle. 8. Slide the ke yboard 2 back to disengage the tabs on the front edge of the ke yboard from the top cover .
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–29 10. Release the ZIF connector 1 to which the ke yboard cable is connected and disconnect the ke yboard cable 2 from the system board. Disconnec ting the K e yboar d Cable 11.
5–30 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5 . 1 2 Spe ak er Assem bl y 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the switch cov er ( Section 5.10 ). 3. Remov e the keyboard ( Section 5.11 ).
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–3 1 6. Remov e the two black Phillips PM2.5×5.0 scre ws 1 that secure the speaker assembly to the computer . 7. Remov e the speaker assembly 2 . R emo ving the S peak er Assembl y Re verse the abo ve procedure to install the speaker assembly .
5–3 2 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5. 1 3 Powe r B u t t o n B o a r d 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the switch cov er ( Section 5.10 ). 3. Remov e the keyboard ( Section 5.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–33 6. Remov e the silver Phillips PM2.5×5.0 scre w 1 that secures the po wer button board to the computer . 7. Remov e the power b utton board 2 . R emo ving the P ow er Button Boar d Re verse the abo ve procedure to install the po wer button board.
5–3 4 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5 . 1 4 Displa y Asse mbly 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the following components: ❏ Memory module compartment cov er ( Section 5.8 ) ❏ Switch cov er ( Section 5.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–35 2. Close the computer . 3. T urn the computer upside do wn with the rear panel to ward you. 4. Remov e the two Phillips PM2.5×8.0 scre ws that secure the display assembly to the computer .
5–3 6 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5. T urn the computer display-side up with the front to ward you. 6. Open the computer to an upright position. 7. Disconnect the display cable 1 from the system board and the microphone cable 2 from the po wer button board.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–3 7 Ä CAUT I ON: Support the display a ssembl y when r emo ving the fo llo w ing sc r e ws . Failur e to support the display a ssembl y can result in damage t o the displa y assembl y and other computer componen ts.
5–3 8 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 12. Remov e the following: 1 Three rubber scre w covers on the display bezel top edge 2 T wo rubber scre w covers on the display bezel bottom edge 3 Fi ve Phillips PM2.5×8.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi c e Guide 5–3 9 13. Flex the inside edges of the left and right sides 1 and the top and bottom sides 2 of the display bezel until the bezel disengages from the display enclosure. 14. Remov e the display bezel 3 .
5–40 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures ✎ The camera module is secured to the display enclosure by a 2-sided adhesi ve pad. Apply remov al force to the middle of the module to remov e it. 15. Remov e the camera module 1 from the display enclosure.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–4 1 17. Remov e the in verter 1 from the display enclosure. 18. Disconnect the display cable 2 and the backlight cable 3 from the display in verter .
5–4 2 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 19. Remov e the six Phillips PM2.5×8.0 screws 1 that secure the display panel to the display enclosure. 20. Remov e the display panel 2 . R emo ving the Dis pla y P anel Displa y Assembl y Subcomponents Spare P ar t Number Information Displa y panels 17.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–43 21. Remov e the two Phillips PM2.0×3.0 scre ws 1 that secure each display hinge to the display enclosure. 22. Remov e the display hinges 2 . 23. Slide the left and right display hinge cov ers 3 off of the display hinges.
5–44 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 24. If it is necessary to replace the wireless antenna transcei v ers and cables, remov e the two Phillips PM2.0×4.0 scre ws 1 that secure each transcei ver to the display enclosure.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–45 28. If it is necessary to replace the microphones and cables, release the retention tabs 1 b uilt into the display enclosure that secure the microphone cables to the display enclosure.
5–4 6 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 31. If it is necessary to replace the camera cable, release the retention tabs 1 bu ilt into the display enclosure that secure the camera cable to the display enclosure. 32.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–4 7 5. 1 5 T o p C ove r 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the following components: ❏ Hard dri ve ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
5–4 8 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 2. T urn the computer upside do wn with the front tow ard you. 3. Remov e the eight Phillips PM2.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–4 9 4. Remov e the four silver Phillips PM2.5×5.0 scre ws that secure the top cov er to the computer .
5–5 0 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5. T urn the computer right-side up with the front to ward you. 6. Disconnect the po wer button board cable 1 and the LED board cable 2 from the lo w insertion force (LIF) connectors to which they are connected.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–5 1 8. Remov e the fi ve Phillips PM2.5×8.0 scre ws 1 and the silver Phillips PM2.
5–5 2 Maintenance and Se rvic e Guide Re mo val and R eplacement Pr ocedures 9. Lift the rear edge of the t op cov er until it disengages from the computer , and remov e the top cover . R emo ving the T op Co ver Re verse the abo ve procedure to install the top co ver .
R emo val and R eplacement Pr ocedur es Maintenance and S ervi c e Guide 5–5 3 5. 1 6 W i r e l e s s Sw i t c h B o a r d 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the following components: ❏ Hard dri ve ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
5–5 4 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 2. Release the ZIF connector 1 to which the wireless switch board cable is connected and disconnect the wireless switch board cable 2 from the system board.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–5 5 3. Remov e the two silver Phillips PM2.5×5.0 scre ws 1 that secure the wireless switch board to the base enclosure. 4. Remov e the wireless switch board 2 . R emo ving the W ire less S w itch Boar d Re verse the abo ve procedure to install the wireless switch board.
5–5 6 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5. 1 7 A u d i o B o a r d 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the following components: ❏ Hard dri ve ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–5 7 2. Remov e the silver Phillips PM2.5×5.0 scre w 1 that secures the audio board to the computer . 3. Slide the audio board 2 back to disengage the audio connectors from the base enclosure.
5–5 8 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5 . 1 8 Bluetoot h Modul e 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the following components: ❏ Hard dri ve ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi c e Guide 5–5 9 2. Disconnect the Bluetooth module cable 1 from the system board. ✎ The Bluetooth module cable is included with the Bluetooth module spare part kit and is also included in the Cable Kit, spare part number 434677-001.
5–60 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5 . 1 9 U SB/M agn etic B oard 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the following components: ❏ Hard dri ve ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–6 1 2. Disconnect the USB/magnetic board cable 1 from the ExpressCard assembly . ✎ The USB/magnetic board cable is included with the USB/magnetic board spare part kit and is also included in the Cable Kit, spare part number 434677-001.
5–6 2 Maintenance and Se rvic e Guide Re mo val and R eplacement Pr ocedures 5 .2 0 Ex pre ssCar d Assem bl y 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the following components: ❏ Hard dri ve ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–63 2. Push in on the ExpressCard slot bezel 1 to release the bezel from the ExpressCard slot. 3. Remov e the ExpressCard slot bezel 2 . ✎ The ExpressCard slot bezel is included in the Plastics Kit, spare part number 432981-001.
5–64 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 4. Remov e the four silver Phillips PM2.5×5.0 scre ws 1 that secure the ExpressCard assembly to the system board. 5. Slide the ExpressCard assembly 2 to the right to disconnect it from the system board.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–6 5 5. 2 1 T o p C ove r S u p p o r t Tr i m 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the following components: ❏ Hard dri ve ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
5–6 6 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 2. T urn the computer upside do wn with the front tow ard you. 3. Remov e the four Phillips PM2.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–6 7 4. T urn the computer right-side up with the front to ward you. 5. Remov e the Phillips PM2.5×8.0 screw 1 that secures the top cov er support trim to the computer . 6. Remov e the top cover support trim 2 .
5–6 8 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5 .2 2 Dis pl a y Lid S witc h Modul e 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the following components: ❏ Hard dri ve ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–6 9 2. Remov e the display lid switch module by f irmly pulling it of f the fan/heat sink assembly . ✎ The display lid switch module is secured to the fan/heat sink assembly by 2-sided tape.
5–7 0 Maintenance and Se rvic e Guide Re mo val and R eplacement Pr ocedures 5 .2 3 P o w er Co nne ctor Assembl y 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the following components: ❏ Hard dri ve ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–7 1 2. Remov e the two silver Phillips PM2.5×5.0 scre ws 1 that secure the po wer connector assembly bracket to the computer . 3. Remov e the power connector assembly brack et 2 .
5–7 2 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 4. Remov e the silver Phillips PM2.5×5.0 scre w 1 that secures the USB board to the computer . 5. Remov e the USB board 2 . 6. Disconnect the USB board cable 3 from the USB board and remov e the cable from the clips 4 in the base enclosure.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–7 3 7. Remov e the black Phillips PM2.5×5.0 screw 1 that secures the po wer connector assembly to the computer . 8. Remov e the power connector assembly 2 from its location in the base enclosure.
5–7 4 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5. 24 Sys t e m B o a r d ✎ When replacing the system board, ensure that the follo w ing components are remov ed from the defectiv e system board and installed on the replacement system board: ■ Memory modules ( Section 5.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–7 5 ❏ Speaker assembly ( Section 5.12 ) ❏ Display assembly ( Section 5.14 ) ❏ To p c o v e r ( Section 5.15 ) ❏ W ireless switch board ( Section 5.16 ) ❏ Audio board ( Section 5.
5–7 6 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 4. Remov e the three Phillips PM2.5×8.0 screws 1 and the three silver Phillips PM2.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi c e Guide 5–77 5. Lift the right side of the system board 1 until it rests at an angle. 6. Remov e the optical driv e connector board 2 . ✎ The optical dri ve connector board is a v ailable using spare part number 432992-001.
5–7 8 Maintenance and Se rvic e Guide Re mo val and R eplacement Pr ocedures 9. If it is necessary to replace th e po wer connector assembly or the USB board cable, turn the system board upside do wn with the front to ward you. 10. Disconnect the po wer connector assembly cable 1 and the USB board cable 2 from the system board.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi c e Guide 5–7 9 5 .2 5 F an/Hea t Sink Assemb ly ✎ When replacing the fan/heat sink assembly , be sure the display lid switch module is remov ed from the defectiv e fan/heat sink assembly and installed on the replacement fan/heat sink assembly .
5–80 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 2. T urn the system board upside do wn with the expansion port and external monitor port to ward you. 3. Disconnect the fan cable 1 from the system board. 4. Loosen the four capti ve Phillips PM2.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–8 1 ✎ The thermal pads and therma l paste should be thoroughly cleaned from the surfaces of the f an/heat sink assembly 1 , 2 , and 3 , the system board components 4 and 6 , and the processor 5 each time the fan/heat sink assembly is remo ved.
5–8 2 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 6. Loosen the three capti ve silv er Phillips PM2.5×5.0 screws 1 that secure the heat sink to the system board.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi ce Guide 5–83 ✎ The thermal pads and therma l paste should be thoroughly cleaned from the surfaces of the heat sink 1 , 2 , and 3 and the system board components 4 , 5 , and 6 , each time the heat sink is remov ed.
5–84 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 5. 26 P r o c e s s o r 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the following components: ❏ Hard dri ve ( Section 5.4 ) ❏ Optical dri ve ( Section 5.
R emo val and R eplacement Pr ocedur es Maintenance and S ervi c e Guide 5–85 ❏ Switch cov er ( Section 5.10 ) ❏ K eyboard ( Section 5.11 ) ❏ Speaker assembly ( Section 5.12 ) ❏ Display assembly ( Section 5.14 ) ❏ To p c o v e r ( Section 5.
5–8 6 Maintenance and S ervi ce Guide Re mo val and R eplacement Pr ocedures 2. T urn the processor locking scre w 1 one-half turn counterclockwise until you hear a click.
Maintenance and S ervi ce Guide 6–1 6 Spec ifi ca tions This chapter provides physical and performance specif ications. Ta b l e 6 - 1 Computer Dimensions With Dual Lamp Displa y Length Width Height (v aries front to rear) 28.5 cm 39.6 cm 3.2 to 4.2 cm 11.
6–2 Mainte nance and Serv ice Gui de Spe cifica tio ns T emperature Operating* Nonoperating 5°C to 35°C -20°C to 60°C 41°F to 95°F -4°F to 140°F Relative humidity (noncondensing) Operating Nonoperating 10% to 90% 5% to 95%, 38.7°C (101.6°F) maximum wet b ulb temperature Maximum altitude (unpressurized) Operating (14.
Spe cificat ion s Maintenance and S ervi ce Guide 6–3 Ta b l e 6 - 2 17.0-inch, WSXGA+, TFT Displa y Dimensions Height Width Diagonal 23.00 cm 36.90 cm 43.40 cm 9.06 in 14.49 in 17.09 in Number of colors Up to 16.8 million Contrast ratio 200:1 Brightness 180 nits typical Pixel resolution Pitch Fo r m a t Configuration 0.
6–4 Mainte nance and Serv ice Gui de Spe cifica tio ns Ta b l e 6 - 3 17.0-inch, WXGA+, TFT Displa y Dimensions Height Width Diagonal 23.00 cm 36.90 cm 43.40 cm 9.06 in 14.49 in 17.09 in Number of colors Up to 16.8 million Contrast ratio 200:1 Brightness 180 nits typical Pixel resolution Pitch Fo r m a t Configuration 0.
Spe cificat ion s Maintenance and S ervi ce Guide 6–5 Ta b l e 6 - 4 Har d Drives 160-GB* 120-GB* Dimensions Height Width We i g h t 9.5 mm 70 mm 102 g 9.
6–6 Mainte nance and Serv ice Gui de Spe cifica tio ns 100-GB* 80-GB* Dimensions Height Width We i g h t 9.5 mm 70 mm 102 g 9.5 mm 70 mm 102 g Interface type ATA - 5 ATA - 5 T ransfer rate Synchrono.
Spe cificat ion s Maintenance and S ervi ce Guide 6–7 Ta b l e 6 - 5 Primary 8-cell, Li-Ion Batter y Dimensions Height Width Depth We i g h t 1.83 cm 27.18 cm 5.23 cm 0.34 kg 0.72 in 10.70 in 2.06 in 0.75 lb Energ y V oltage Amp-hour capacity W att-hour capacity 14.
6–8 Mainte nance and Serv ice Gui de Spe cifica tio ns Ta b l e 6 - 6 D VD/CD-R W Combo Drive Applicable disc Read: D VD-R, D VD-R W , D VD-ROM (D VD-5, D VD-9, D VD-10, DV D - 1 8 ) , CD-ROM (Mode .
Spe cificat ion s Maintenance and S ervi ce Guide 6–9 Disc thickness 1.2 mm (0.047 in) T rack pitch 0.74 µm Access time CD media D VD media Random Full strok e < 110 ms < 210 ms < 130 ms < 225 ms A u dio output level Line-out, 0.
6–1 0 Maintenance and S ervi ce Guide Spe cifica tio ns Ta b l e 6 - 7 DV D ± RW / R a n d CD-R W Double-La yer Combo Drive Applicable disc Read: D VD-R, D VD-R W , D VD-ROM (D VD-5, D VD-9, D VD-1.
Spe cificat ion s Maintenance and S ervi ce Guide 6–1 1 Disc thickness 1.2 mm (0.047 in) T rack pitch 0.74 µm Access time CD media D VD media Random Full strok e < 175 ms < 285 ms < 230 ms < 335 ms A u dio output level A udio-out, 0.
6–1 2 Maintenance and S ervi ce Guide Spe cifica tio ns Ta b l e 6 - 8 System DMA Hard ware DMA System Function DMA0 Not applicable DMA1 Not applicable DMA2 Not applicable DMA3 Not applicable DMA4 D.
Spe cificat ion s Maintenance and S ervi ce Guide 6–1 3 Ta b l e 6 - 9 System Interrupts Hard ware IRQ System Function IRQ0 System timer IRQ1 Quic k Launch buttons IRQ2 Cascaded IRQ3 USB2 Enhanced H.
6–1 4 Maintenance and S ervi ce Guide Spe cifica tio ns Hard ware IRQ System Function IRQ12 Synaptics PS/2 por t pointing device IRQ13 Numeric data processor IRQ14 Primar y IDE channel IRQ15 Seconda.
Spe cificat ion s Maintenance and S ervi ce Guide 6–1 5 T able 6-10 System I/O Addresses I/O Address (he x) System Function (shipping configuration) 0x00000000-0x00000CF7 PCI bus 0x00000000-0x00000C.
6–1 6 Maintenance and S ervi ce Guide Spe cifica tio ns I/O Address (he x) System Function (shipping configuration) 0x000001F0-0x000001F7 Primar y IDE Channel 0x00000220-0x0000022F System board reso.
Spe cificat ion s Maintenance and S ervi ce Guide 6–1 7 I/O Address (he x) System Function (shipping configuration) 0x00000C6F-0x00000C6F System board resources 0x00000CD4-0x00000CD5 System board re.
6–1 8 Maintenance and S ervi ce Guide Spe cifica tio ns T able 6-11 System Memory Map Memory Map Address (he x) System Function (shipping configuration) 0xD4100000-0xD41FFFFF PCI standard PCI-to-PCI.
Spe cificat ion s Maintenance and S ervi ce Guide 6–1 9 Memory Map Address (he x) System Function (shipping configuration) 0xF2C00000-0xF6BFFFFF T e xas Instr u ments PCIxx21/x515 Cardb us Controlle.
Maintenance and S ervi ce Guide A–1 A Sc r e w List ing This appendix provides specif ication and reference information for the scre ws used in the computer . The four Phillips PM3.0×3.0 scre ws used to secure the hard dri ve bracket to the hard dri ve are included in the Hard Dri ve Brack et Kit, spare part number 434106-001.
A–2 Maintenance and S ervi ce Guide Scr ew Listin g The remaining scre ws listed in this appendix are av ailable in the Scre w Kits, spare part number 434676-001, and the Display Scre w Kit, spare part number 432967-001. Capti v e Phillips P M2 . 0×5 .
Scr ew Listin g Maintenance and S ervi ce Guide A–3 Phillips P M2 .0×1 1 . 0 Scr e w Locati ons Ta b l e A - 3 Phillips PM2.0×11.0 Screw Color Qty . Length Thread Head Width Silv er 2 11.0 mm 2.0 mm 5.0 mm Where used: 2 screws that secure the Mini Card mo dule to the computer (documented in Section 5.
A–4 Maintenance and S ervi ce Guide Scr ew Listin g Phillips P M2 .5×8. 0 Sc r ew L ocations Ta b l e A - 4 Phillips PM2.5×8.0 Screw Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 1 One scre w that secures the optical dr iv e to the computer (documented in Section 5.
Scr ew Listin g Maintenance and S ervi ce Guide A–5 Phillips P M2 .5×8. 0 Sc r ew L ocations Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Continued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 2 screws that secure the displa y assemb ly to the computer (documented in Section 5.
A–6 Maintenance and S ervi ce Guide Scr ew Listin g Phillips P M2 .5×8. 0 Sc r ew L ocations Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Continued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 5 screws that secure the displa y bezel to the displa y enclosu re (documented in Section 5.
Scr ew Listin g Maintenance and S ervi ce Guide A–7 Phillips P M2 .5×8. 0 Sc r ew L ocations Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Continued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 6 screws that secure the displa y panel to the displa y enclosure (documented in Section 5.
A–8 Maintenance and S ervi ce Guide Scr ew Listin g Phillips P M2 .5×8. 0 Sc r ew L ocations Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Continued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 8 screws that secure the top co ver to the base enclosure (documented in Section 5.
Scr ew Listin g Maintenance and S ervi ce Guide A–9 Phillips P M2 .5×8. 0 Sc r ew L ocations Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Continued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 5 screws that secure the top co ver to the base enclosure (documented in Section 5.
A–1 0 Maintenance and Serv ice Gui de Scr ew Listin g Phillips P M2 .5×8. 0 Sc r ew L ocations Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Continued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 1 F our screws that secure the top cov e r suppor t trim to the base enclosure (documented in Section 5.
Scr ew Listin g Maintenance and S ervi ce Guide A–1 1 Phillips P M2 .5×8. 0 Sc r ew L ocation Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Continued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the top co ver suppor t trim to the base enclosure (documented in Section 5.
A–1 2 Maintenance and Serv ice Gui de Scr ew Listin g Phillips P M2 .5×8. 0 Sc r ew L ocations Ta b l e A - 4 Phillips PM2.5×8.0 Screw (Continued) Color Qty . Length Thread Head Width Black 38 8.0 mm 2.5 mm 5.0 mm Where used: 3 screws that secure the system board to the base enclosure (documented in Section 5.
Scr ew Listin g Maintenance and S ervi ce Guide A–1 3 Phillips P M2 .0×3 . 0 Scr e w L ocations Ta b l e A - 5 Phillips PM2.0×3.0 Screw Color Qty . Length Thread Head Width Silv er 8 3.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the optical driv e br ack et to the optical dr ive (documented in Section 5.
A–1 4 Maintenance and Serv ice Gui de Scr ew Listin g Phillips P M2 .0×3 . 0 Scr e w L ocations Ta b l e A - 5 Phillips PM2.0×3.0 Screw (Continued) Color Qty . Length Thread Head Width Silv er 8 3.0 mm 2.0 mm 4.0 mm Where used: 4 screws that secure the displa y hinges to the displa y panel (documented in Section 5.
Scr ew Listin g Maintenance and S ervi ce Guide A–1 5 Phillips P M2 .0×3 . 0 Scr e w L ocations Ta b l e A - 5 Phillips PM2.0×3.0 Screw (Continued) Color Qty . Length Thread Head Width Silv er 8 3.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the Bluetooth modu le to the base enclosure (documented in Section 5.
A–1 6 Maintenance and Serv ice Gui de Scr ew Listin g Phillips P M2 .0×5 . 0 Sc r e w L ocations Ta b l e A - 6 Phillips PM2.0×5.0 Screw Color Qty . Length Thread Head Width Silv er 6 5.0 mm 2.0 mm 5.0 mm Where used: 6 screws that secure the s witch co v er to the computer (documented in Section 5.
Scr ew Listin g Maintenance and S ervi ce Guide A–1 7 Phillips P M2 .5×7 . 0 Sc r ew L ocation Ta b l e A - 7 Phillips PM2.5×7.0 Screw Color Qty . Length Thread Head Width Black 1 7.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the k eyboard to the computer (documented in Section 5.
A–1 8 Maintenance and Serv ice Gui de Scr ew Listin g Silv er Phillips P M2 . 5×5 . 0 Sc r ew L ocations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw Color Qty . Length Thread Head Width Silv er 28 5.0 mm 2.5 mm 5.0 mm Where used: 3 screws that secure the k eyboard to the computer (documented in Section 5.
Scr ew Listin g Maintenance and S ervi ce Guide A–1 9 Silv er Phillips P M2 . 5×5 . 0 Sc r ew L ocations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty .
A–20 Maintenance and S ervi ce Guide Scr ew Listin g Silv er Phillips P M2 . 5×5 . 0 Sc r ew L ocations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silv er 28 5.0 mm 2.5 mm 5.0 mm Where used: 4 screws that secure the top co ver to the base enclosure (documented in Section 5.
Scr ew Listin g Maintenance and S ervi ce Guide A–2 1 Silv er Phillips P M2 . 5×5 . 0 Sc r e w Locati on Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silv er 28 5.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the top co ver to the base enclosur e (documented in Section 5.
A–2 2 Maintenance and S ervi ce Guide Scr ew Listin g Silv er Phillips P M2 . 5×5 . 0 Sc r ew L ocations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silv er 28 5.0 mm 2.5 mm 5.0 mm Where used: 1 T wo scre ws that secure the wireless s witch board to the base enclosure (documented in Section 5.
Scr ew Listin g Maintenance and S ervi ce Guide A–2 3 Silv er Phillips P M2 . 5×5 . 0 Sc r ew L ocations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silv er 28 5.0 mm 2.5 mm 5.0 mm Where used: 4 screws that secure the ExpressCar d assembly to the base enclosure (documented in Section 5.
A–2 4 Maintenance and S ervi ce Guide Scr ew Listin g Silv er Phillips P M2 . 5×5 . 0 Sc r ew L ocations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty .
Scr ew Listin g Maintenance and S ervi c e Guide A–2 5 Silv er Phillips P M2 . 5×5 . 0 Sc r ew L ocations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silv er 28 5.0 mm 2.5 mm 5.0 mm Where used: 3 screws that secure the system board to the base enclosure (documented in Section 5.
A–2 6 Maintenance and S ervi ce Guide Scr ew Listin g Silv er Phillips P M2 . 5×5 . 0 Sc r ew L ocations Ta b l e A - 8 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silv er 28 5.0 mm 2.5 mm 5.0 mm Where used: 3 screws that secure the heat sink to the system board (documented in Section 5.
Scr ew Listin g Maintenance and S ervi ce Guide A–2 7 Blac k Phillips P M2 .5×5 . 0 Sc r ew L ocations Ta b l e A - 9 Blac k Phillips PM2.5×5.0 Screw Color Qty . Length Thread Head Width Black 3 5.0 mm 2.5 mm 5.0 mm Where used: T wo screws that secure the speak er assembly to the base enclosure (documented in Section 5.
A–2 8 Maintenance and S ervi ce Guide Scr ew Listin g Blac k Phillips P M2 .5×5 . 0 Sc r e w Locati on Ta b l e A - 9 Blac k Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Black 3 5.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the po wer connec tor assembly to the base enclosure (documented in Section 5.
Scr ew Listin g Maintenance and S ervi ce Guide A–29 Phillips P M2 .0×4. 0 Sc r ew L ocations T able A-10 Phillips PM2.0×4.0 Screw Color Qty . Length Thread Head Width Silv er 4 4.0 mm 2.0 mm 5.0 mm Where used: 4 screws that secure the wireless antenn a tr ansceive rs to the displa y enclosure (documented in Section 5.
A–30 Maintenance and S ervi ce Guide Scr ew Listin g Phillips P M2 .5×6 . 0 Sc r e w Locatio ns T able A-11 Phillips PM2.5×6.0 Screw Color Qty . Length Thread Head Width Black 4 6.0 mm 2.5 mm 5.0 mm Where used: 4 screws that secure the f an/heat si nk assemb ly to the system board (documented in Section 5.
Maintenance and S ervi ce Guide B–1 B B ac k u p an d R eco v er y in Win do ws X P Rec o verin g S y s te m I nform a ti on T ools provided b y the operating system and PC Recov ery software are de.
B–2 Maint enance and Serv ice Gui de Back up and R ecov er y in Windo ws XP Back ing Up Y ou r I nf o r mat io n When to Ba c k Up ■ On a regularly scheduled basis ✎ Set reminders to back up your information periodically .
Back up and R ecov er y in Windo ws XP Maintenance and S ervi ce Guide B–3 Us ing S y ste m R est or e P oint s When you back up your system, you are creating a system restore point. A system restore point allo ws you to save and name a snapshot of your hard dri ve at a specif ic point in time.
B–4 Maint enance and Serv ice Gui de Back up and R ecov er y in Windo ws XP Restoring to a Pre vious Date and Time T o re vert to a restore point (creat ed at a pre vious date and time), when the computer was functioning optimally: 1. Select Start > Help and Support > S ystem Restore .
Back up and R ecov er y in Windo ws XP Maintenance and S ervi ce Guide B–5 ■ Number each disc before inserting it into the computer optical dri ve. ■ If necessary , you can exit the program before you ha ve f inished creating the recov ery discs.
B–6 Maint enance and Serv ice Gui de Back up and R ecov er y in Windo ws XP Rein s ta lli n g S of t ware P rog ram s an d D rivers If a program or dri ver preinstalled at the factory is accidentally erased or is damaged, the Application and Dri ver Recov ery tool allo ws you to reinstall it.
Back up and R ecov er y in Windo ws XP Maintenance and S ervi ce Guide B–7 2. Select Start > All Pr ograms > System Recovery > A pplication and Driver Recov ery . The Application and Dri ver Recov ery tool opens. 3. Select A pplication Installation or Driver Installation , and then click Next .
B–8 Maint enance and Serv ice Gui de Back up and R ecov er y in Windo ws XP Reco v erin g from the Reco very Disc s T o restore the system from the recov e ry discs: 1. Back up all personal f iles. 2. Insert the f irst recov ery disc into the optical driv e and restart the computer .
Back up and R ecov er y in Windo ws XP Maintenance and S ervi ce Guide B–9 If you want to perform a destructive reco very: ✎ A destructi ve reco very formats the hard dri ve and restores the computer to its factory state. Select this option only as a last resort.
B–1 0 Mainte nance and Servi ce Guide Back up and R ecov er y in Windo ws XP 4. Click OK . 5. At the System Recov ery screen, click Advanced Options .
Maintenance and S ervi ce Guide C–1 C B ac k u p an d R eco v er y in Win d o w s Vi s t a Rec o verin g S y s te m I nform a ti on T ools provided b y the operating system and Recov ery Manager sof.
C–2 Maint enance and Serv ice Gui de Back up and R ecov er y in Windo ws V ista Back ing up Y ou r I nf or mat i on When to Ba c k Up ■ On a regularly scheduled basis. ✎ Set reminders to back up your information periodically . ■ Before the computer is repaired or restored.
Back up and R ecov er y in Windo ws V ista Maintenance and S ervi ce Guide C–3 Us ing S y ste m R est or e P oint s When you back up your system, you are creating a system restore point. A system restore point allo ws you to save and name a snapshot of your hard dri ve at a specif ic point in time.
C–4 Maint enance and Serv ice Gui de Back up and R ecov er y in Windo ws V ista Restoring to a Pre vious Date and Time T o re vert to a restore point (creat ed at a pre vious date and time), when the computer was functioning optimally , follow these steps: 1.
Back up and R ecov er y in Windo ws V ista Maintenance and S ervi ce Guide C–5 ■ If necessary , you can exit the program before you ha ve f inished creating the recov ery discs. The next time you open Recov ery Manager , you will be prompted to continue the disc creation process.
C–6 Maint enance and Serv ice Gui de Back up and R ecov er y in Windo ws V ista ■ In all cases, if a program has been deleted from your computer , the reinstallation process reinstalls the program or utility to the factory image b ut cannot restore your personal settings.
Back up and R ecov er y in Windo ws V ista Maintenance and S ervi ce Guide C–7 P erforming a Reco v er y Recov ery Manager software allo ws you to repair or restore the system if you experience system f ailure or instability . Reco very Manager works from reco very discs that you create or from a dedicated recov ery partition on the hard driv e.
C–8 Maint enance and Serv ice Gui de Back up and R ecov er y in Windo ws V ista ❏ Restart the computer and press f11 while the “Press <F11> for recov ery” message is displayed on the screen. Then select Recov ery Manager . Recov ery Manager opens.
Back up and R ecov er y in Windo ws V ista Maintenance and S ervi ce Guide C–9 Upd atin g Reinstalled Sof t war e After you perform a system recov ery , connect to the Internet to update all reinstalled software.
Maintenance and S ervi ce Guide D–1 D Dis pl a y C ompon ent Recy c lin g Å WA R N I N G : The bac klight con tains mer cury . Cautio n should be e xe r c ised whe n r emo v ing and handling the backli ght to a v oi d damaging this component and ca using e xposur e to the mer c ur y .
D–2 Maint enance and Serv ice Gui de Display C omponent Recy cling This appendix provides disassembl y instructions for the display assembly . The display assembly must be disassembled to gain access to the backlight 1 and the LCD panel 2 . ✎ Disassembly procedures dif fer from one display assembly to another .
Displa y Componen t Rec yc ling Maintenance and S ervi ce Guide D–3 Perform the follo w ing steps to disassemble the display assembly: 1. Remov e all screw co vers 1 and scre ws 2 that secure the display bezel to the display assembly .
D–4 Maint enance and Serv ice Gui de Display C omponent Recy cling 2. Lift up and out on the left and right inside edges 1 and the top and bottom inside edges 2 of the display bezel until the bezel disengages fro m the display assembly . 3. Remov e the display bezel 3 .
Displa y Componen t Rec yc ling Maintenance and S ervi ce Guide D–5 4. Disconnect all LCD panel cables 1 from the display in verter board and remov e the in verter board 2 .
D–6 Maint enance and Serv ice Gui de Display C omponent Recy cling 5. Remov e all screws 1 that secure the LCD panel to the display enclosure. 6. Remov e the LCD panel 2 from the display enclosure.
Displa y Componen t Rec yc ling Maintenance and S ervi ce Guide D–7 7. T urn the LCD panel upside do wn. 8. Remov e all screws that secure the LCD panel frame to the LCD panel.
D–8 Maint enance and Serv ice Gui de Display C omponent Recy cling 9. Use a sharp-edged tool to cut the tape 1 that secures the side of the LCD panel to the LCD panel frame.
Displa y Componen t Rec yc ling Maintenance and S ervi ce Guide D–9 11. Remov e the screws 1 that secure the backlight co ver to the LCD panel. 12. Lift the top edge of the backlight cov er 2 and swing it forward.
D–1 0 Maintenance and Serv ice Guide Display C omponent Recy cling 14. T urn the LCD panel right-side up. 15. Remov e the backlight cables 1 from the clip 2 in the LCD panel.
Displa y Componen t Rec yc ling Maintenance and S ervi ce Guide D–1 1 16. T urn the LCD panel upside do wn. 17. Remov e the backlight frame from the LCD panel.
D–1 2 Maintenance and Serv ice Guide Display C omponent Recy cling Å WA R N I N G : The bac klight con tains mer cury . Cautio n should be e xe r c ised whe n r emo v ing and handling the backli ght to a v oi d damaging this component and ca using e xposur e to the mer c ur y .
Displa y Componen t Rec yc ling Maintenance and S ervi ce Guide D–1 3 19. Disconnect the display cable 1 from the LCD panel. 20. Remov e the screws 2 that secure the LCD panel to the LCD rear panel. 21. Release the LCD panel 3 from the LCD rear panel.
D–1 4 Maintenance and Se rvi ce Guide Display C omponent Recy cling 23. Remov e the LCD panel. R emo ving the L CD P anel 24. Recycle the backlight and LCD panel.
Maintenance and S ervi ce Guide E–1 E Co nnec tor P in As si gnmen ts Ta b l e E - 1 Universal Serial Bus Pin Signal Pin Signal 1 +5 VDC 3 Data + 2 Data – 4 Ground.
E–2 Maint enance and Serv ice Gui de Connec tor P in Assignments Ta b l e E - 2 RJ-45 (Netw ork) Pin Signal Pin Signal 1 T ransmit + 5 Un used 2 T ransmit – 6 Receiv e – 3 Receive + 7 Un used 4 .
Connec tor P in Assignments Maintenance and S ervi ce Guide E–3 Ta b l e E - 3 S-Video-Out Pin Signal Pin Signal 1 TV -Ground 5 TV -CD 2 TV -CVBS 6 TV -Ground 3 TV -Ground 7 TV -YD 4 TV -Ground.
E–4 Maint enance and Serv ice Gui de Connec tor P in Assignments Ta b l e E - 4 External Monitor Pin Signal Pin Signal 1 Red analog 9 +5 VDC 2 Green analog 10 Ground 3 Blue analog 11 Monitor detect .
Connec tor P in Assignments Maintenance and S ervi ce Guide E–5 Ta b l e E - 5 RJ-11 (Modem) Pin Signal Pin Signal 1 Unused 4 Unused 2T i p 5U n u s e d 3 Ring 6 Unused.
E–6 Maint enance and Serv ice Gui de Connec tor P in Assignments Ta b l e E - 6 A udio-In (Microphone) Pin Signal Pin Signal 1 Audio signal in 3 Ground 2 Audio signal in Ta b l e E - 7 A udio-Out (H.
Maintenance and S ervi ce Guide F–1 F P o w er C ord Set Requiremen ts 3-Con duc tor P o w er Cord Set The wide range input feature of the computer permits it to operate from any line v oltage from 100 to 120 or 220 to 240 volts A C.
F–2 Maintenance and Serv ice Guide P ow er Cor d Set Requirements Gen eral R equiremen ts The requirements listed belo w are applicable to all countries and regions. ■ The length of the po wer cord set must be at least 1.5 m (5.0 ft) and a maximum of 2.
P ow er Cord Set R equirements Maintenance and S ervi ce Guide F–3 Countr y/Region -Spec ific Requiremen ts 3-Conductor P ower Cor d Set Requirements Country/Region Accredited Ag ency Applicable Not.
F–4 Maintenance and Serv ice Guide P ow er Cor d Set Requirements Ko r e a E K 4 The Netherlands KEMA 1 Norwa y NEMK O 1 P eople’ s Republic of China CCC 5 Sweden SEMK O 1 Switzerland SEV 1 T aiwan BSMI 4 United Kingdom BSI 1 United States UL 2 ✎ NOTES: 1.
Maintenance and S ervi ce Guide Inde x–1 In de x 1394 port 1–9 A AC adapter, spare part numbers 3–28 , 3–34 analog TV tuner, spare part numbers 3–28 arrow keys 1–13 audio board removal 5.
Inde x–2 Mainte nance and Servi ce Guide Inde x cables, service considerations 4–2 camera 1–15 camera cable disconnection 5–36 removal 5–46 spare part number 3–21 , 3–36 , 5–46 camera .
Inde x Maintenance and S ervi ce Guide Inde x–3 display bezel removal 5–39 spare part numbers 3–20 , 3–35 , 3–39 , 5–39 Display Cable Kit, spare part number 3–21 , 3–36 , 5–46 displa.
Inde x–4 Mainte nance and Servi ce Guide Inde x ExpressCard slot bezel illustrated 3–25 removal 5–63 external monitor port location 1–8 pin assignments E–4 F fan/heat sink assembly removal 5.
Inde x Maintenance and S ervi ce Guide Inde x–5 headset, spare part number 3–28 , 3–31 heatsink, spare part numbers 3–37 hinge removal 5–43 spare part numbers 3–21 , 3–36 , 5–43 hinge .
Inde x–6 Mainte nance and Servi ce Guide Inde x modem, troubleshooting 2–36 monitor port location 1–8 pin assignments E–4 mouse, spare part number 3–28 , 3–38 , 3–39 N network jack locat.
Inde x Maintenance and S ervi ce Guide Inde x–7 R rear components 1–8 recovering from partition on hard drive Windows Vista C–7 Windows XP B–8 recovering from the recovery discs Windows Vista .
Inde x–8 Mainte nance and Servi ce Guide Inde x S-Video-out jack location 1–8 pin assignments E–3 switch cover removal 5–22 spare part number 3–3 , 3–36 , 3–40 , 5–22 system board remo.
Inde x Maintenance and S ervi ce Guide Inde x–9 USB infrared receiver spare part numbers 3–34 USB infrared receiver, spare part numbers 3–28 USB/magnetic board removal 5–60 spare part number 3.
Ein wichtiger Punkt beim Kauf des Geräts HP dv9000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP dv9000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP dv9000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP dv9000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP dv9000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP dv9000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP dv9000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP dv9000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP dv9000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
