Benutzeranleitung / Produktwartung XU800 des Produzenten HP (Hewlett-Packard)
Zur Seite of 52
HP Kayak XU800 Troubleshooting Guide Yits.bok Page 1 Friday, December 17, 1999 11:33 AM.
Notice The infor mation contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, incl uding, but not lim ited to, the implied war ranties of merchantability and f itness for a particul ar purpose.
3 Contents Y our PC W orkstat ion does not sta rt correctly, or doe s not start at all. Refer to pag e 7. For example, the monitor is blank, error mess ages during boot, beep cod es emitted. Y our PC W orkstation starts normally, but you are having pro blems configuri ng.
Intr oduc tion 4 Introduction This manual i s for anyone who wants to: • Trouble shoot p roblems o n the PC Wor kstation • Find out where to get mo re information and support. For infor mation about setting up and using your PC W orkstation, refe r to the User’ s Guide that came with your PC W orkstation.
5 Important Warnin gs Safety Info rmation WARNIN G There is a dange r of explosio n if the battery is inc orrectly insta lled. For your safety, neve r attempt to rec harge, disassemb le, or burn an old battery. Only replac e the ba ttery w ith th e same or equ ivalent type, a s recomm ended b y the manufacturer.
Important Warnings 6 Yits.bok Page 6 Friday, December 17, 1999 11:33 AM.
Your PC Workstation Does Not Start Correctly Symptom Type of P rob lem Case 1 When the power button is p ressed, the PC Workstation sh ows no sign of activ ity at all: • PC W orks ta tion m ay not be cor rec tly con necte d to the power su pply. Refer to pa ge 9.
Your PC Worksta tion Does N ot Start Correctly 8 If Help ful Inform ation Troublesho oting Pre -Boot Checks With HP MaxiLife Har dware Refer to page 13. Checking Memory Install ed on a Memo ry Expansion Card Refer to pa ge 15. EMU (Error Message Utility) Description Refer to page 16.
9 Your PC Workst ation Does Not Start Correctly Case 1 — If There Is No Activi ty At A ll Case 1 — If There Is No Activity At All When the power button is pre ssed, the PC W orkstat ion shows no si gn of activity at all. The monitor is blank, there is no so und from the hard disk drive or fan, or the status panel does not light up.
Your PC Worksta tion Does N ot Start Correctly Case 1 — If Th ere Is No Activ ity A t All 10 If the PC Workstation still does not sta rt There is not a problem with the power supply unit. 1 Replace the power s upply unit by a known wor king power supply from the same model of PC.
11 Your PC Workst ation Does Not Start Correctly Case 2 — Moni tor Is Blan k Case 2 — Monitor Is Blank When the power button is pressed, the PC W orkstation appears to boot (sound fro m the hard disk dri ve and fan, and status LED is green ), but the monit or is blank.
Your PC Worksta tion Does N ot Start Correctly Case 2 — Monitor Is B lank 12 NOTE If the mon itor goe s blank o r becomes corrupt during a Windows boot, re fer to “Case 5 — Scre en Goes Blank or Co rrupt Ima ge” on pa ge 22.
13 Your PC Workst ation Does Not Start Correctly Case 3 — Detected Har dware Er ror Case 3 — D etected Hardware Error When the power button is pressed, the hard disk dri ve or fan can be heard, but the PC W orkstation does not boot. The m onitor rema ins blank and the status LED is red.
Your PC Worksta tion Does N ot Start Correctly Case 3 — Detected Har dware Erro r 14 Refer to page 2 1 for inf ormation about runtime error codes. Symptom... Check that... Symptom... Check that... • RDRAM modules are correctly instal led in the R IMM sockets.
15 Your PC Workst ation Does Not Start Correctly Case 3 — Detected Har dware Er ror Memory Installation NOTE Use onl y the HP memory modules p rovide d for yo ur PC Work station mod el. If you want to fi nd out abo ut availabl e accesso ries for yo ur PC Workst ation, re fer to the HP Access orie s Web site at: http://www.
Your PC Worksta tion Does N ot Start Correctly Case 4 — Boot Process Fails 16 Case 4 — Boot Process Fails When the power button is pre ssed, the PC W orkstat ion starts to boot and there is activity on the monitor , but the boot pro cess then fails with an error message.
17 Your PC Workst ation Does Not Start Correctly Case 4 — Boot Process Fails If There Is a Beep Code During Boot If an error occurs dur ing the POST , which prevents the PC W orkstation from starting, and bef ore the display device has been initialized, a series of beep codes are issued.
Your PC Worksta tion Does N ot Start Correctly Case 4 — Boot Process Fails 18 5 Processor t est error. Check that: • Processor is correctly i nstalled. • Termin ation ca rd installe d in processo r slot 2 in a single processor s ystem. • Refer to page 13 for furt her act ions to tak e.
19 Your PC Workst ation Does Not Start Correctly Case 4 — Boot Process Fails POST Test Sequence and POST Error Following the pre-boot check s, the POST (Po wer-On Self Test) sequence is in itiated. It should be noted that in some cases, a Beep and Post Error can occur at the same time.
Your PC Worksta tion Does N ot Start Correctly Case 4 — Boot Process Fails 20 • Check t hat the CD-ROM driv e has been detected in the Set up program. Press F2 to e nter t he Setup program • Check tha t the data and power cables are correctly connected to the CD -ROM drive.
21 Your PC Workst ation Does Not Start Correctly Case 4 — Boot Process Fails Runtime Errors During normal usage (and at boot) of the PC Workstation, MaxiLife continually mo nitors vital system parameters. These include: temperature, fan malfunctions, powe r voltage drops, system board PLL problems and CPU problem s.
Your PC Worksta tion Does N ot Start Correctly Case 5 — Screen Go es Blank o r Corrup t Image 22 Case 5 — Screen G oes Blank or Corr upt Image When the power button is pre ssed, the PC W orkstat i.
Configuration Prob lems If your PC W orkstation boots nor mally , but yo u are having prob lems configuring different parts of your PC W orkstation. Symptom T ype of Problem PC Workstation starts to boot, but a POST (Power- On Self-Test ) error me ssage is displayed o n the screen.
Conf iguration Problems 24 Helpful In formation Troublesho oting BIOS Problems: • Updating the BIOS. Refer to page 36. • Resto ring the BI OS Defa ult Set tings . Refer to page 36. • Clearing the CMOS. Refer to page 37. • Reco vering the BIOS (C risis Mode).
25 Configuratio n Problems If There Is a CMOS Test Error If There Is a CMOS Test Er ror NOTE Before removing the cover, always switc h off the displa y and PC Work station.
Conf iguration Problems If There Is a Keyboard or Mouse Test Err or 26 If There Is a Keyboard or Mouse Test Error NOTE Before removing the cover, always switc h off the display and PC Workstatio n. Discon nect the po wer cord a nd any ac cessory c ables.
27 Configuratio n Problems If There Is a Floppy Disk Drive Test Error If There Is a Floppy Disk Drive Test Erro r NOTE Before removing the cover, always switc h off the displa y and PC Work station. Discon nect the po wer cord a nd any ac cessory c ables.
Conf iguration Problems If There Is a Har d Disk, DVD, CD-RW or CD- ROM Test Error 28 If There Is a Ha rd Disk, DVD, CD-RW or CD-ROM Test Error NOTE Before removing the cover, always switc h off the display and PC Workstatio n. Discon nect the po wer cord a nd any ac cessory c ables.
29 Configuratio n Problems If Th ere Is a Ser ial or P arallel Por t Test Erro r If There Is a Serial or Pa rallel Port Test Error NOTE Before removing the cover, always switc h off the displa y and PC Work station. Discon nect the po wer cord a nd any ac cessory c ables.
Conf iguration Problems If Yo u C annot Tur n O ff Yo ur P C Wor kstation 30 If You Cannot Turn Off Your PC Workstation If You Have Forgotten Your Password NOTE Use these instructions if the passwords were set with the Setup pr ogram . Symptom... Check that.
31 Configuratio n Problems If There Is an IRQ P roblem If There Is an IRQ Problem NOTE Plug and Pl ay oper ating s ystems such as W indows 95 a nd Window s 98 s hould, i n normal circum stances, be able to allo cate IR Qs ac cording to the h ardware in stalle d in the P C Workst ation.
Conf iguration Problems If Your PC Workst ation Has an Audio Problem 32 If Your PC Workstation Has an Audio Problem Sympto m... Solution ... No sound when r unning any app licat ion s. If you are using Windows NT 4.0, check the v olume, mute, and balance settings .
33 Configuratio n Problems If Your PC Workstation Has a Software Problem If Your PC Workstation Has a Software Pro blem Symptom... Solution... Green power indicator light is illum inated, but some software won’t run. • Refer to the a pplication soft ware documentation and/or t he operating s ystem documentation for guidance.
Conf iguration Problems If the PC Wo rkstation Clock Is Not Keeping Time Cor rectly 34 If t he PC Wo rkstat ion Clock Is N ot Keeping Tim e Correctly WARNING There is a danger of explosion if t he batter y is inco rrectl y instal led. For your safet y, never att empt to rechar ge, disasse mble, or bur n the old battery.
35 Configuratio n Problems If You Have Problem s Using the Euro Sym bol If You Have Problems Using t he Euro Symbol If your keyboard has a Euro symbol key , it can only be used with operating sy stems and appli cations that support this feature.
Conf iguration Problems Trouble shooting BIOS Pro blems 36 Troubleshooting BIOS Prob lems The BIOS is a set of program routines that gives the PC W orkstation its fundamental oper ational characteristics. Many problems with y our PC W orkstation can be solved by updating ( flashing) the BIOS (Basic Input Output Sy stem).
37 Configuratio n Problems Trou ble shoot ing BIOS Pr oble ms Clearing the CMOS 1 Turn off the PC Workstation, disconne ct the power cord and data cables, then remove the cover. 2 Set the system board switch 4 to the DOWN position to clear the CMOS memory .
Conf iguration Problems Trouble shooting BIOS Pro blems 38 Recovering the BIOS (Crisis Mode) If for some reason the BIOS is corrupted and the standard flash cannot be used, use t he BIOS R ecovery Mode (exceptional BIOS r ecovery operation) to restore the BIOS.
39 Configuratio n Problems System Bo ard Switc hes System Board Switches There are ten system board switches use d for configuration. A certain number of these are reserved (switches 2, 5, 6, 8, 9, 10) and should not be modified , otherwise it could lead to a system failure .
Conf iguration Problems Using the HP Setup Program 40 Using the HP Setup Prog ram The Setup program all ows you to vi ew and change the confi guration of your PC W orkstat ion, such as the passwords and boot device order . Follow these instructions to check the configur ation.
41 Configuratio n Problems Mor e Tr oubl esho otin g f or Dri ves More Troubleshooting for Drives This section pr ovides more information on how to solve problems with your drives or accessory boards.
Conf iguration Problems More T roublesh ooting fo r Drives 42 If a SCSI Hard Disk Drive Is Not Available If a SCSI hard di sk drive is no t recognized du ring the sy stem boot, nor available during no.
43 Configuratio n Problems Mor e Tr oubl esho otin g f or Dri ves If the Hard Disk Activity Light Does Not Work If the hard disk activity light does not flick er when the PC W orkstation is accessing the har d disk drive: 1 Check that the contro l panel connector is fi rmly attached to the system board.
Conf iguration Problems More T roublesh ooting fo r Drives 44 CD-ROM, DVD or CD-RW Door Does No t Open If you have d ifficulty re moving a disk from the dri ve (during a power failure fo r example), you can use the manual eject button.
Troubleshooting with HP DiagTools HP DiagTools is an accurate and rel iable utili ty that helps you diagnose any potential hard ware-related pro blems. With this utility you can: • Check the hardware configuration and verify that it is functio ning correctly.
Troubleshooting with HP DiagTools 46 If you are running the diagno stics from a CD-ROM, th en the followin g settings must also be checked. ❒ In the Security menu, set all Hardware Pr otection items to “Enabled” or “Unlocked” (if app licable).
47 Troubleshooting with HP DiagTools HP DiagTools Hardware Tests The following hardware tests can be performed from HP Di agT ools: ❒ Hardware Detection .
Troubleshooting with HP DiagTools 48 Producing a Sup port Ticket To produce a comple te record of your system’s configuration and test results, you will need to create a Support Ticket If you are using HP Diag Tools fro m the hard disk drive, a floppy disk drive is re quired to sto re the Suppo rt Ticket file.
Recovering Har d Disk Drive Contents In the unlike ly event of a hard disk crash, you can recove r your PC Workstation’s preloade d operating system and software using the PC Image Engineer — Image Creation and R ecovery CD-ROM 1 supplied with your PC Workstation.
Recovering Hard Disk Drive C ontents 50 Recovering Prelo aded Drivers Y ou can use the Image Creation and Recovery CD -ROM to reinstall drivers that were delivered with the PC W orkstation. T o do this, insert the CD-ROM into the CD- ROM drive. Autom atically an HTML fil e is displayed.
Other Sources of Inform ation Getting Online Support for Troubleshoot ing HP’ s support web si te provides extensive support material that can help you troublesho ot problems on y our PC W orkstatio.
Hewlett-Packar d Support and Information Services Y ou can learn more about HP se rvice and support fr om the suppor t W eb site: www.hp.com/go/kayaksupport . Collecting Informati on Before Contacting HP Support It is recomm ended that before co ntacting HP Support you n ote down some of the information mentio ned below .
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) XU800 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) XU800 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) XU800 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) XU800 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) XU800 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) XU800 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) XU800 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) XU800. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) XU800 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
