Benutzeranleitung / Produktwartung QY468AW#ABA des Produzenten HP (Hewlett-Packard)
Zur Seite of 48
Hardware Reference Guide HP Compaq 60 05 Pro Ultra-Slim De sktop Business PC.
© Copyright 201 0 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
About This B ook This guide pr ovides bas ic informatio n for upgra ding this com puter model. WARNING! Text set off in this manner indicates tha t failure to follow direction s could result in bodily harm or loss of life.
iv About This Book ENWW.
Table of contents 1 Product Features ............ ........... ...... .......... ........... ....... ........... ....... .......... .......... ....... ..... ......... .......... ....... ....... 1 Standard Co nfiguration Feature s ........... ..........
Appendix C Se curity Lock Provisions ... ........ ............ ............. ....... ............. ............. ....... ............. . ............... .. 32 Installing a Security Loc k ......... .................. ............ .................. ...
1 Product Features Standard Conf igurati on Features The HP Compaq Ultra-Slim Desktop computer comes wi th featu res that ma y vary dependin g on the model. For a c omplete listing of the har dware an d softwar e instal led in the compute r, run th e diagnos tic util ity (in cluded on some comp uter models o nly).
Front Panel Compon ents Drive configur ation ma y vary by mode l. Figure 1-2 Front Panel Co mponents Table 1-1 Front Panel Compo nents 1 Optical Drive 5 Microphone/H eadphone Connector 2 System Power .
Rear Pa nel Compone nts Figure 1-3 Rear P anel Comp onents Table 1-2 Rear Pa nel Compon ents 1 Line-Out Connect or for powered audio devices (green) 6 Power Cord Connec tor 2 PS/2 Keyboard Connec tor .
Keyboard Figure 1-4 Keyboa rd Co mponents Table 1-3 Key board Components 1 Function Keys Perform special functions depending on the software application being used. 2 Editing Keys Include the following: Insert, Home, Page Up, Delete, End, and Page Down.
Using th e Windows Logo Key Use the Windows Logo ke y in combinat ion wi th other k eys to perform ce rtain functions a vaila ble in the Wi ndows ope rating system.
Table 1-4 Win dows Logo Key Functions (continued) Windows Logo Key + right arrow Snaps the window to the right side of the screen Windows Logo Key + down arrow Minimizes the w indow Windows Logo Key +.
2 Hardware Upgrades Servicea bility Fe atures The comp uter inc ludes fe atures that m ake it e asy to u pgrade a nd serv ice. No t ools are needed f or most o f the i nstallati on proce dures d escribed i n this chapter.
Connecting the Power Cord When c onnectin g the power supply , it is importan t to follo w the step s bel ow to ens ure the p ower co rd does n ot pull free from the comp uter. 1. Connect the round end of the po wer cord t o the p ower sup ply connec tor on the r ear of the compu ter (1).
Removin g the Com puter A ccess Pan el To ac cess i nternal c omponents , you must re move the acce ss panel : 1. Remove/di sengage a ny secu rity de vices t hat prohi bit ope ning the compu ter. 2. Remove a ll remov able med ia, such as com pact dis cs or USB flash d rives, fr om the co mputer.
Replacin g the Compu ter Acce ss Panel 1. Align the tabs on t he pane l with the slot s on the chassis then sl ide the p anel t owards th e front o f the chassi s until it stop s (1).
Removing a nd Repla cing the Front Bezel 1. Remove/di sengage a ny secu rity de vices t hat prohi bit ope ning the compu ter. 2. Remove a ll remov able med ia, such as com pact dis cs or USB flash d rives, fr om the co mputer. 3. Turn of f the com puter pr operly t hrough th e operati ng syst em, then turn off any external devices .
To re plac e th e fro nt b ezel : 1. Insert th e three h ooks on the bo ttom side of the be zel into the rect angula r holes on the chassis (1) t hen rotate the to p side o f the b ezel onto the chas sis (2 ) and snap it into p lace. Figu re 2- 5 Rep lacing th e Front B ezel 2.
Removing a Be zel Blank On so me model s, there is a bez el blank covering the exte rnal drive bay that ne eds to be remove d before ins talli ng a drive.
Changing from Des ktop t o Tower Con figuration 1. Remove/di sengage a ny secu rity de vices t hat prohi bit ope ning the compu ter. 2. Remove a ll remov able med ia, such as com pact dis cs or USB flash d rives, fr om the co mputer. 3. Turn of f the com puter pr operly t hrough th e operati ng syst em, then turn off any external devices .
Removing and I nstalli ng Memory The c omputer comes with double data rate 3 sync hronous dy namic r andom ac cess m emory (DDR 3- SDRAM) small outlin e dual inline mem ory modul es (SODIMMs ). SODIMMs The memo ry sockets on the sy stem boa rd can be populat ed with up to two industr y-stand ard SODIMM s.
Populating SODIMM Sockets There are two SODIMM so ckets on the sys tem boar d, with on e socke t per ch annel. The so ckets are labeled DIMM1 and DIMM2.
3. Turn of f the com puter pr operly t hrough th e operati ng syst em, then turn off any external devices . 4. Disconne ct the po wer cor d from th e power outlet and disconn ect any exter nal devi ces.
9. To insta ll a SO DIMM, sl ide the ne w SODIMM into the socket at app roximate ly a 30° angle ( 1) then pres s the SO DIMM down (2) so th at the latches lock it in place. Figu re 2- 10 Ins talling a SODIMM NOTE: A memory modul e can be installe d in only one way.
5. If the comp uter is on a stand, r emove th e computer from the stand an d lay the computer down. 6. Remove th e compute r access panel. 7. Disconne ct the ca ble on th e rear of the opti cal drive .
Preparing the New Optical D rive Before the new o ptical dr ive ca n be use d, the rel ease lat ch must be attache d. 1. Peel the backi ng off the adhesiv e on the relea se latch. 2. Without allo wing the re lease latch to touch the optical dr ive, caref ully align the holes on the release la tch with the pins on the si de of the optica l drive.
Installing the New Optical Drive NOT E: If you ar e insta lling an optic al drive i n a ba y that di d not p reviously have a drive i n it, yo u must r emove th e acces s panel and the be zel b lank co vering t he open ing of the bay before proce eding.
Replacing the Hard Drive NOT E: The Ultra- Slim D esktop s upports only 2.5-inch Serial ATA (SA TA) inter nal h ard drive s; parall el ATA ( PATA) i nternal har d drives a re not s upported. Before you remo ve the ol d hard d rive, be sure to ba ck up th e data from the old hard drive so that you can tr ansfer the d ata to the new ha rd driv e.
9. Lift th e hard dr ive ca rrier straight up and out of th e chass is. Figu re 2- 15 Rem oving the Hard Driv e Carrier 10. Remove the fo ur guide screws f rom the sid es of the hard dr ive carr ier. Figu re 2- 16 Re moving th e Guide Sc rews 11. Lift the ha rd drive up to th e top of t he car rier (1) a nd slide the d rive out of the car rier (2).
12. Position the hard dr ive so that the top of the hard dr ive is up again st the top of the carri er (1) so that the circuit boa rd on the bottom of the hard driv e does no t come in c ontact wi t the tabs on the bottom of the ca rrier, then slide the new hard driv e into the carrier (2).
14. To place t he hard d rive car rier back in the c hassis, align t he guide scre ws with th e slots on the drive b ay, drop the car rier stra ight do wn int o the dri ve bay (1), and press the handl e on th e carrie r all the way down (2) so that the dr ive is pr operly seated and loc ked in p lace.
Instal ling and Removing a Port Cover An opti onal rea r port cov er is available f or the computer . To inst all the port co ver: 1. Thread the cable s throug h the botto m hole o n the p ort cover (1) and connect the cables to the rear po rts on th e compute r.
A Specifications Table A-1 Specifications Desktop Dimensi ons (in the deskto p position) Height Widt h Depth (depth will increase if t he computer is equipped with a port se curity bracket) 2.60 in 9.90 in 10.00 in 6.6 cm 25.1 cm 25.4 cm Approxi mate Weight 6.
Table A-1 Speci fications (c ontinued) Rated Input Current (maximum) 1 2.4A @ 100VAC 1.2A @ 200VAC 1 This sys tem utilizes an act ive power fact or corrected exte rnal power supply . This allows t he system t o pass the CE mark requirements for use in the c ountries of the European Union.
B Battery Replacement The batter y that comes wit h the computer pr ovides powe r to the real-ti me clock. Wh en replaci ng the battery , use a battery e quivalen t to the battery origina lly instal led in the com puter. The computer comes with a 3- volt li thium coin ce ll bat tery.
NOTE: On so me compu ter model s, it may be neces sary to remove an inter nal comp onent t o gain access to the batt ery. 8. Depending on the type of b attery h older on the system board, c omplete the follow ing instr uctions to replace the batter y.
b. Insert t he new bat tery and position the cli p back into place. Figure B-3 Removing a C oin Cell Battery (Type 3) NOTE: After the b attery h as bee n replaced , use the follow ing steps t o com plete this procedur e. 9. Replace t he acces s panel .
C Security Lock Provisions NOT E: For information on data security features, refer to the Desktop Manage ment Guide a nd the HP Pr otectTools Security Manager Guide (some mod els) at http://www.hp .com . The s ecurity lo cks di splayed below and on the followin g page s can be used to secu re the c omputer.
Figure C-2 Instal ling a C able with a Port C over Installed Padlock Figure C-3 Installing a Pad lock ENWW In stalling a Securi ty Lock 33.
HP Business PC Security Lock 1. Fasten the sec urity cab le by looping it aroun d a stationary object. Figu re C-4 Secur ing the Ca ble to a Fixed Obj ect 2.
3. Screw the loc k to the chassis usi ng the screw pro vided. Figu re C-6 Attaching the Lock to the Cha ssis 4. Insert the plug end of the securi ty cable into the lock ( 1) and p ush the b utton i n (2) to en gage th e lock. Us e the ke y pro vided to disengag e the lock.
Front Bezel Security The fr ont beze l can be locked in place by ins talling a securi ty screw provide d by HP. To inst all the securi ty screw : 1. Remove/di sengage a ny secu rity de vices t hat prohi bit ope ning the compu ter. 2. Remove a ll remov able med ia, such as com pact dis cs or USB flash d rives, fr om the co mputer.
9. Install t he secur ity scre w thro ugh the mi ddle fro nt bezel relea se tab an d into the chassi s to secure the fr ont bezel in place. Figu re C-9 Inst alling th e Front Bezel S ecurity S crew 10. Replace the access panel. 11. If the compute r was on a stand, replac e the stan d.
D Electrostatic Discharge A dis charge o f static electri city fro m a finge r or ot her cond uctor ma y damage system boards or other stat ic-sensiti ve device s.
E Computer Operating Guidelines, Routine Care and Shipping Preparation Computer Operating Guidelines and Routine Care Follow these g uidelines to proper ly set u p and ca re for th e comput er and monitor: ● Keep t he compu ter away from ex cessive m oisture, dire ct sunli ght, an d extremes of hea t and cold.
Optical Driv e Precaution s Be sur e to obs erve the followin g guid elines w hile oper ating or c leaning t he opti cal drive . Operation ● Do not mov e the drive dur ing oper ation. Th is may cause i t to malfu nction during reading. ● Avoid expo sing the driv e to sudden change s in temperatu re, as conden sation may form inside the unit.
Index A access panel locking and unl ocking 32 remo ving 9 repl acing 10 appli cation ke y 4 audio co nnectors 2, 3 B battery rep lacement 29 bezel, removi ng 11 C cable loc k 32 compone nts front pan.
conne cting 8 cord con nector 3 power sup ply operat ing volt age ran ge 27 product ID locati on 6 R rear p anel com ponents 3 releas e latch attaching op tical drive 20 removin g access panel 9 batte.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) QY468AW#ABA (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) QY468AW#ABA noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) QY468AW#ABA - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) QY468AW#ABA reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) QY468AW#ABA erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) QY468AW#ABA besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) QY468AW#ABA verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) QY468AW#ABA. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) QY468AW#ABA gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
