Benutzeranleitung / Produktwartung L2206TMP des Produzenten HP (Hewlett-Packard)
Zur Seite of 33
HP Compaq L2206tm and L2206tmp LED Backlit Touch Monitors User Guide.
© 2012 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in t he United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
About this guide This guide provides information on setting up the monitor, operating the touc h screen, troubleshooting, and technical specifications. WARNING! Text set off in this manner indicates that fail ure to follow directions could result in bodily harm or loss of life.
iv About this guide.
Table of contents 1 Product features ...... ......... ............ .......... ........... ......... ............. ......... ........... ............. .... .... 1 HP LCD Touch Mo nitors ......... ............ ................. ............. ...........
vi.
1 Product features HP LCD Touch Monitors The LCD (liquid crystal dis play) monitors have an active matrix, thin -film transistor (TFT) panel. The monitor models and features include: ● L2206tm model, 54.
● Passive stylus docked in rear enclosure ● HDCP copy protection on DVI and DisplayPort inputs ● Software and d ocumentation disc that includ es monitor drivers and product documentation ● Ene.
2 Setting up the monitor To set up the monitor, ensure th at the power is turned off to the monitor, co mputer system, and other attached dev ices, and the n follow th e instructions below. Unfolding the monitor pedestal base 1. Lift the monitor from its box and place it face down on a flat surface.
Rear components Figure 2-2 Rear com ponents Component D escription 1 AC power connector Connects the AC power cable to the monitor. 2 DisplayPort Connects the DisplayPort cable to the monitor. 3 VGA connector Connects the VGA cable to the monitor. 4 DVI-D connector Connects the DVI-D cable to t he monitor.
Connecting the cables 1. Place the monitor in a convenient, well-v entilated location near the computer. 2. Remove the cable management clip from the pedest al by pulling outward on the two sides of the clip (1) and lifting the clip off the pedestal (2).
6. Connect one end of the powe r cord to the AC po wer connector on t he back of the m onitor, and connect the other end to an electrical wall outlet. Figure 2-4 Connecting the cables WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord gr ounding plug.
Adjusting the monitor NOTE: Your monitor model may look different than the model in the fo llowing il lustrati ons. 1. Tilt the monitor's panel forward or backwa rd to set it to a comfortable eye level. Figure 2-6 Tilting the monitor 2. Adjust the monitor’s height to a co mfortable position for your indi vidual workstation.
3. Pivot the monitor from landscape to portrait or ientation viewing to adapt to your application. a. Adjust the monitor to full-height position and ti lt the monitor back to full-tilt position (1). b. Pivot the monitor clockwise 90° from la ndscape to po rtrait orientation (2).
Front components Figure 2-9 Front components Table 2-1 Front components Component D escription 1 Menu button Opens, selects from, or exits th e OSD menu. 2 Minus/volume button If the OSD menu is on, press to navigate backward through the OSD menu and decrease adjustment levels.
Turning on the monitor 1. Press the power button on the computer to turn it on. 2. Press the power button on the front of the monitor to turn it on. CAUTION: Burn-in image damage may occur on monitors that display the same static image on- screen for 12 o r more consecutiv e hours of non-use.
Connecting USB devices USB connectors are used to connect devices such as a digital came ra, USB keyboard, or USB mouse. Two USB conne ctors are loca ted on the side panel of the monitor. NOTE: You must connect the USB hub cable from the mo nitor to the computer to enable the USB 2.
Removing the monitor pedestal base You can remove the monitor panel fr om the pedestal base to install the panel on a wall , swing arm, or other mounting fixture. CAUTION: Before beginning to disassembl e the monitor, be sure the mo nitor is turned off and the power and signal ca bles are both disconnected.
Mounting the monitor The monitor panel can be attached to a wall, swing arm, or other mounting fixture. NOTE: This apparatus is intended to be supported by a UL or CSA listed wall mount bracket. 1. Remove the monitor panel from the pedestal base. Refer to Removing t he monitor pedestal base on page 12 .
Locating the rating labels The rating labels on the monitor provide the spar e part number, product number, and serial number. You may need these numbers when contacting HP about the monitor model. The rating labels are located on the rear panel of the monitor display head.
3 Operating the touch screen Installing the touch software Microsoft Windows 7/Vist a/XP (plug and play) NOTE: Refer to Conne cting the ca bles on page 5 for instructions on connecting the USB cable.
● Windows XP—Select Start > Control Panel > System , and then select the Hardware tab. Select the Device Manager button. If the driver is installed correctly, two HID-compliant device entries and one USB Human Interface Device entry will appear under the Human Interface Devices category.
Using the touch function NOTE: Before using the touch funct ion, make sure the USB cable is connected an d the Windows operating system is started. NOTE: When the touch function is active, make sure there are no fo reign objects in the areas encircled in the figure below.
3. Select the View by drop-down list, and then select either Lar ge icons or Small icons . 4. Select the Tablet PC Settings control panel. NOTE: The Tablet PC Settings control panel will only appear after Microsoft Windows 7 recognizes a connected touch monitor.
6. Select the Calibrate… button. Figure 3-4 Calibrate the display 7. Repeat steps 5 and 6 for the second monitor. NOTE: If you have two monitors that are the same model, be sure to note which model is calibrated first because both wi ll appear with identical names.
Tips and troubleshooting Tips ● WARNING! Keep the display away fro m any hea t sources, suc h as electr ic radiators, natural gas pipes, or direc t sunlight. Also keep th e display away from excessive dust, mechanical vibration, or shock. For safety , remove the powe r plug prior to cleaning.
Touch screen troubleshooting NOTE: For general troubleshooting information, refer to the HP LCD Monitors Reference Guide included on the disc with your monitor. Table 3-2 Touch screen troubleshooting Problem Solution Computer does not recover from Sleep mode when the touch screen is touched.
4 Finding more information Refer to the HP LCD Monitors Reference Guide included on the disc with your monitor for additional information on: ● Optimizing monitor performance ● Safety and maintena.
A Technical specifications NOTE: All specifications represent the typical specifications provided by HP's compo nent manufacturers; actual performance may vary either higher or lower. L2206tm/L2206tmp Table A-1 L2206tm/L2206tmp specifications Display Type 54.
Table A-1 L2206tm/L2206tmp specifications (continued) Environmental requirements : Temperature (operat ing) Temperature (non-operating) Humidity (operating) Humidity (non-operating) Altitude (operatin.
Recognizing preset display resolutions The display resolutions lis ted below are the most commonly used modes an d are set as factory defaults. This monitor automaticall y recognizes these preset modes and they will appear properly sized and centered on the s creen.
Entering user modes The video controller signal may occasionally call for a mode that is not preset if: ● You are not usin g a standard g raphics adapter. ● You are not using a preset mode. It this occurs, you may need to readjust the parame ters of the monitor screen by using the on-screen display.
B LCD monitor quality and pixel policy The TFT monitor uses high-precision technology th at is manufactured according to HP stand ards to guarantee troub le-free perfo rmance. N evertheless, the display may have cosmetic imperfection s that appear as small bright or dark spots.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) L2206TMP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) L2206TMP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) L2206TMP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) L2206TMP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) L2206TMP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) L2206TMP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) L2206TMP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) L2206TMP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) L2206TMP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
