Benutzeranleitung / Produktwartung B6191-90015a des Produzenten HP (Hewlett-Packard)
Zur Seite of 81
Diagnostic/IPR Media User's Guide P A-RISC Computer Systems B6191-90015a June 1999 © Copyright 1999 Hewlett-P ackard Company.
2 Legal Notices The information contained in this document is subject to change without notice . Hewlett-P ac kard makes no warranty of any kind with regard to this manual, including , but not limited to , the implied warranties of merc hantability and fitness for a particular purpose .
3 Ethernet is a trademark of Xerox Corporation. © Copyright 1985-1986, 1988 Massachussetts Institute of T echnology . X Window System is a trademark of the Massachussetts Institute of T echnology . MS-DOS and Microsoft are U .S . registered trademarks of Microsoft Corporation.
4.
Contents 5 1. Diagnostic/IPR Media Product Overview Design of the Diagnostic/IPR Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Media Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Contents 5. Using the Diagnostic/IPR Media to Install Diagnostics on Y our System Support T ools Manager (HP-UX 9000 Series 800/700) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 EMS Hardware Monitors . . . . . . . . . . . . . . . .
7 Printing History T able 1 This printing date and part number indicate the current edition. The printing date changes when a new edition is printed. (Minor corrections and updates which are incorporated at reprint do not cause the date to change .) The part number changes when extensive technical changes are incorporated.
8.
9 About This Manual The Diagnostic/IPR Media performs two functions: • The Diagnostic/IPR Media is the swinstall format distribution media for the following hardware support products for 10.01, 10.10, 10.20, 10.30, and 11.x HP-UX systems; it is also the update format distribution media for the 9.
10 Problem Reporting. If you have any problems with the software or documentation, please contact your local Hewlett-P ackard Sales Office or Customer Service Center . Reader Comments . W e welcome your comments about our documentation. If you have editorial suggestions or recommended improvements for this document, please write to us .
Chapter 1 11 Diagnostic/IPR Media Product Overview 1 Diagnostic/IPR Media Product Overview The Diagnostic/IPR Media allows you to diagnose and fix problems when the operating system cannot be booted from the system disk. The Diagnostic/IPR Media runs on minimal hardware , with or without the system disk.
12 Chapter 1 Diagnostic/IPR Media Product Overview Design of the Diagnostic/IPR Media Design of the Diagnostic/IPR Media The following subsections discuss the physical layout of the Diagnostic/IPR Media.
Chapter 2 13 Hardware Support T ools Overview 2 Hardware Support T ools Overview The purpose of this chapter is to give a brief high-level overview of the recommended use of HP hardware support tools . This is not intended as a comprehensive troubleshooting guide, nor as a tutorial on the products themselves .
14 Chapter 2 Hardware Support T ools Overview Support T ools Manager (STM) System Support T ools Manager (STM) System The Support T ools Manager (STM) is an online support tools platform that is currently available on HP9000 series 700 and 800 machines .
Chapter 2 15 Hardware Support T ools Overview Initial System Loader (ISL) Standalone En vironment Initial System Loader (ISL) Standalone Environment The ISL standalone environment consists of the Initial System Loader , ISL-based tools which run directly from ISL, and the Offline Diagnostic Environment (ODE).
16 Chapter 2 Hardware Support T ools Overview Hard ware Suppor t T ools Usa ge Hardware Support T ools Usage Each one of the products described above plays a role in the overall system troubleshooting strategy . Figure 2-1 contains a simple flow diagram that outlines the intended use of the hardware support tools .
Chapter 2 17 Hardware Support T ools Overview Hard ware Suppor t T ools Usa ge Figure 2-1 Hardware Support T ools Usage Flow Diagram W ill the Diagnostic/IPR Media boot? If the machine will not boot t.
18 Chapter 2 Hardware Support T ools Overview Hard ware Suppor t T ools Usa ge influenced by the type of machine that is having the problem and the error symptoms .
Chapter 3 19 Using the Diagnostic/IPR Media to Run Offline Diagnostics 3 Using the Diagnostic/IPR Media to Run Offline Diagnostics The Offline Diagnostics Environment (ODE) consists of a T est Controller (TC), a System Library (SysLib), and any number of T est Modules (TMs), all resident on the Diagnostic/IPR Media in the LIF .
20 Chapter 3 Using the Diagnostic/IPR Media to Run Offline Diagnostics NO TE Changes to Offline Diagnostics as of June 1999 (IPR 9906): • The UPDATE utility for ODE has been replaced by FUPDATE .
Chapter 3 21 Using the Diagnostic/IPR Media to Run Offline Diagnostics How to Run ODE's Command Line Interface How to Run ODE's Command Line Interface T o start ODE's command line interface , do the following: 1. If you are at the PDC prompt (e .
22 Chapter 3 Using the Diagnostic/IPR Media to Run Offline Diagnostics How to Run ODE's Command Line Interface 7. Select the test module on the LIF that you wish to run, and decide whether you wish to run it interactively , or non-interactively .
Chapter 3 23 Using the Diagnostic/IPR Media to Run Offline Diagnostics T est Module Manager ( TMMGR ) . T est Module Manager ( TMMGR ) . TMMGR (pronounced TM Manager) is a special ODE module that implements an ease-of-use user interface for ODE.
24 Chapter 3 Using the Diagnostic/IPR Media to Run Offline Diagnostics T est Module Manager ( TMMGR ) . screen, use the FIRST or LAST commands . User commands at the command prompt may be chained together using a semicolon as a separator .
Chapter 3 25 Using the Diagnostic/IPR Media to Run Offline Diagnostics T est Module Manager ( TMMGR ) . user -selected tests for all selected hardware modules . Note , not all available tests for a module may be considered default. At any time the user may hit Ctrl-C to abort test execution.
26 Chapter 3 Using the Diagnostic/IPR Media to Run Offline Diagnostics T est Module Manager ( TMMGR ) . Logging Screen T o enter the logging screen, type LOG at the command prompt. The logging screen displays detailed information that each TM may ha ve output during its execution.
Chapter 3 27 Using the Diagnostic/IPR Media to Run Offline Diagnostics T est Module Manager ( TMMGR ) . When the state of SCROLL is OFF , the console display is updated using special terminal-specific control mechanisms (allowing the redraw to occur muc h faster).
28 Chapter 3 Using the Diagnostic/IPR Media to Run Offline Diagnostics T est Module Manager ( TMMGR ) . NEXT NEXT (N) Use this command to display the next page of the system screen, the environment screen, the logging screen, or a test screen. Note, <Ctrl>-N (N) can be used as a shortcut for this command.
Chapter 3 29 Using the Diagnostic/IPR Media to Run Offline Diagnostics T est Module Manager ( TMMGR ) . LOG LOG Use this command to go to the logging screen.
30 Chapter 3 Using the Diagnostic/IPR Media to Run Offline Diagnostics Updating Processor Firmware Using the Diagnostic/IPR Media Updating Processor F irmware Using the Diagnostic/IPR Media CA UTION If you should run ODE support tools with the wrong revision of processor firmware (PDC) on your system, you could cause an HPMC .
Chapter 3 31 Using the Diagnostic/IPR Media to Run Offline Diagnostics Updating Processor Firmware Using the Diagnostic/IPR Media 14.It is necessary that you shutdown the operating system on the system whose firmware you wish to change . This can be done with the reboot -h command.
32 Chapter 3 Using the Diagnostic/IPR Media to Run Offline Diagnostics Updating Processor Firmware Using the Diagnostic/IPR Media.
Chapter 4 33 Suppor t T ools Manager (STM) 4 Support T ools Manager (STM) The Support T ools Manager (STM) is a platform for online support tools currently available for HP9000 Series 700 and 800 machines . Upon startup, you connect to a local or remote system.
34 Chapter 4 Suppor t T ools Manager (STM) Running STM Running STM T o start STM and run support tools : 1. Enter the command appropriate for your terminal. • F or X W indows terminals and workstations , enter /usr/sbin/xstm . • F or non-graphics terminals , enter /usr/sbin/mstm (menu-based version) or /usr/sbin/cstm (command-line version).
Chapter 4 35 Suppor t T ools Manager (STM) Three Interfaces Three Interfaces Y ou can access the Support T ools Manager (STM) through any of three interfaces . Choose the interface appropriate for your needs , preferences, and resources . If possible, use xstm.
36 Chapter 4 Suppor t T ools Manager (STM) System Map and Device Icons System Map and Device Icons When you first connect to a computer system, you see a system map showing all the hardware entities in the system (CPU , memory , device adapters, and I/O devices).
Chapter 4 37 Suppor t T ools Manager (STM) System Map and Device Icons System Map in mstm The following figure shows a system map in mstm: Figure 4-2 /usr/sbin/stm/ui/bin/stm hpdst199 File System Dev.
38 Chapter 4 Suppor t T ools Manager (STM) System Map and Device Icons System Map in cstm The cstm system map is almost identical to the mstm system map.
Chapter 4 39 Suppor t T ools Manager (STM) Kinds of Support T ools Kinds of Support T ools T o use the diagnostics and support tools , the user first invokes one of the user interface modules ( xstm,.
40 Chapter 4 Suppor t T ools Manager (STM) Menus and Commands Menus and Commands The xstm, mstm, and cstm interfaces all have different w ays to display menus and accept commands from the user . The following subsections detail the xstm, mstm, and cstm menus and commands .
Chapter 4 41 Suppor t T ools Manager (STM) Menus and Commands mstm Menus and Commands In mstm, you traverse screens and menus , and select commands from pulldown menus , which are similar to those fou.
42 Chapter 4 Suppor t T ools Manager (STM) Menus and Commands Screen Navigation There are two types of screen navigation: • Navigating between screens • Navigating within screens T o na vigate between one screen and another , use the T ab key .
Chapter 4 43 Suppor t T ools Manager (STM) Menus and Commands Figure 4-7 mstm Menus and Commands.
44 Chapter 4 Suppor t T ools Manager (STM) Menus and Commands mstm Shortcut Keys A new 'shortcuts' feature has been added to mstm which lets you do frequently performed operations quickly .
Chapter 4 45 Suppor t T ools Manager (STM) Menus and Commands cstm Menus and Commands In cstm, you simply enter the command name (or its abbreviated form) at the prompt. There are no menus and you can enter any command at any time. The following lists the cstm commands for the HP-UX 10.
46 Chapter 4 Suppor t T ools Manager (STM) Getting Result Information (Logs) Getting Result Information (Logs) Most of the time you will get the information you need by looking at the status of device icons on the system map. F or example, a device icon in xstm is green for Successful and red for F ailure.
Chapter 4 47 Suppor t T ools Manager (STM) Remote Execution Remote Execution Y ou can run the STM user interface on one machine, and use it to run support tools on one or more remote machines .
48 Chapter 4 Suppor t T ools Manager (STM) Remote Execution Distributed Structure Efficient remote execution is possible because STM has a distributed structure. F igure 4-10 shows how the parts of STM are distributed between the UI machine and the UUT .
Chapter 4 49 Suppor t T ools Manager (STM) Getting Help Getting Help STM provides sophisticated and full-featured help systems for the main STM interface and for interactive tools such as Expert tools and Firmw are Update tools . See F igure 4-11 for a sample help display in xstm.
50 Chapter 4 Suppor t T ools Manager (STM) Getting Help Figure 4-11 Sample Online Help in xstm (for FW Update T ool).
Chapter 4 51 Suppor t T ools Manager (STM) Common Problems Common Problems Exercisers sometimes enter a "Hung" state. STM monitors the progress of all running tools and expects each tool to send a "heartbeat" every minute or so.
52 Chapter 4 Suppor t T ools Manager (STM) Common Problems The diagmond demon is automatically started for customers when they boot. It also happens automatically when you update the diagnostic system, as that also forces a reboot, which launches diagmond .
Chapter 4 53 Suppor t T ools Manager (STM) Common Problems SCSI T ape and Disk T ools report SCSI commands as failed in the T est Activity Logs. Some of the SCSI disk and tape tools log errors in their T est Activity logs indicating that commands such as LOG SENSE and INQUIRY failed.
54 Chapter 4 Suppor t T ools Manager (STM) Common Problems.
Chapter 5 55 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System 5 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System The Diagnostic/IPR Media is the swinstall format distribution media for the following hardware support products for 10.
56 Chapter 5 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System Support T ools Manager (HP-UX 9000 Series 800/700) Support T ools Manager (HP-UX 9000 Series 800/700) The Support T ools Manager (STM) on HP-UX 10.x and 11.x systems provides a simple interface to online diagnostics and support tools .
Chapter 5 57 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System EMS Hard ware Monitors EMS Hardware Monitors Included on the Diagnostic/IPR Media are the EMS Hardw are Monitors -- an important new tool for maintaining system availability .
58 Chapter 5 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System HP Predictive Support HP Predictive Support HP Predictive Support helps improve the reliability of your HP 9000 Series 800s by monitoring disk/tape drives and system memory for potential problems .
Chapter 5 59 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System HP Predictive Support • The inventory of software and patches installed on your systems is tracked by the PROACTIVE patching utility .
60 Chapter 5 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System LIF-LO AD (HP-UX 9000 Series 800 and 700 Systems) LIF-LOAD (HP-UX 9000 Series 800 and 700 Systems) The LIF-LOAD produ.
Chapter 5 61 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System Installing Online Support T ools from the Dia gnostic/IPR Media (CD-ROM) Installing Online Support T ools from the Diagnostic/IPR Media (CD-ROM) The following procedure is an example using a graphical user interface on an X11 terminal.
62 Chapter 5 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System Installing Online Support T ools from the Dia gnostic/IPR Media (CD-ROM) 1. Boot HP-UX 2. Insert the Diagnostic/IPR Media CD-ROM into the drive. 3. Find the device file for the CD-ROM drive by using the ioscan -fn or ioscan -fnC disk command.
Chapter 5 63 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System Installing Online Support T ools from the Dia gnostic/IPR Media (CD-ROM) b. Set Source Depot Type to “Local CDROM”. F or the Source Depot P ath, specify the path to the appropriate HWCR or HW patch bundle for your system.
64 Chapter 5 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System Installing Online Support T ools from the Dia gnostic/IPR Media (CD-ROM) Figure 5-1 Specify Source W indow.
Chapter 5 65 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System Installing Online Support T ools from the Dia gnostic/IPR Media (CD-ROM) 10.
66 Chapter 5 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System Installing Online Support T ools from the Dia gnostic/IPR Media (CD-ROM) 11.
Chapter 5 67 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System Installing Online Support T ools from the Dia gnostic/IPR Media (CD-ROM) Figure 5-4 Marking Products to Be Installed 12.
68 Chapter 5 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System Installing Online Support T ools from the Dia gnostic/IPR Media (CD-ROM) 13.After the analysis has completed, click the OK button to start the installation. The first "Confirmation" window appears .
Chapter 5 69 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System Installing Online Support T ools from the Dia gnostic/IPR Media (CD-ROM) 18.Check the Release Notes for other information on the products you installed. The Release Notes contain any special post-installation actions that may be required following this procedure.
70 Chapter 5 Using the Diagnostic/IPR Media to Install Diagnostics on Y our System Installing Online Support T ools from the Dia gnostic/IPR Media (CD-ROM).
Appendix A 71 Disk Copy Utility — T o make an image of a disk after install or upgrade (HP-UX 10.x to 11.x) A Disk Copy Utility — T o make an image of a disk after install or upgrade (HP-UX 10.x to 11.x) COPYUTIL is designed to copy data from a given disk to a tape and then at a later time, copy the data from the tape back to a disk.
72 Appendix A Disk Copy Utility — T o make an image of a disk after install or upgrade (HP-UX 10.x to 11.x) Operating En vironment Operating Environment COPYUTIL operates under ODE and thus it only operates in an offline environment.
Appendix A 73 Disk Copy Utility — T o make an image of a disk after install or upgrade (HP-UX 10.x to 11.x) Quick Start Instructions Quick Start Instructions Executing COPYUTIL .
74 Appendix A Disk Copy Utility — T o make an image of a disk after install or upgrade (HP-UX 10.x to 11.x) Quick Start Instructions At this point, typing UTILINFO would give you a good idea of what to do, but let us assume we just want to copy data off the last Quantum disk drive (disk index 5) onto the DDS tape drive (tape index 4).
Appendix A 75 Disk Copy Utility — T o make an image of a disk after install or upgrade (HP-UX 10.x to 11.x) Quick Start Instructions Restored Successful. COPYUTIL> Y ou have now restored the data onto your new disk drive. Y ou may wish to verify that the data on the tape and the disk are the same.
76 Appendix A Disk Copy Utility — T o make an image of a disk after install or upgrade (HP-UX 10.x to 11.x) Quick Start Instructions.
77 B EMS Hardware Monitors Included on the Diagnostic/IPR Media are the EMS Hardw are Monitors -- an important new tool for maintaining system availability . The EMS Hardware Monitors allow you to monitor the operation of a wide variety of hardware products and be alerted immediately if any failure or other unusual event occurs .
78 Appendix B EMS Hardware Monitors Enabling Hard ware Monitoring Enabling Hardware Monitoring The EMS Hardware Monitors are installed with the Support T ools Manager . Once the monitoring software is installed, you simply need to enable hardw are monitoring and all supported hardware devices on your system will automatically be monitored.
Appendix B 79 EMS Hardware Monitors Enabling Hard ware Monitoring.
80 Appendix B EMS Hardware Monitors Enabling Hard ware Monitoring.
Index Index 81 C COPYUTIL (disk copy utility) , 71 operating environment , 72 cstm user interface , 35 menus and commands , 45 system map , 38 D device icons , 36 diagnose tool (STM) , 39 Diagnostic/I.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) B6191-90015a (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) B6191-90015a noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) B6191-90015a - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) B6191-90015a reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) B6191-90015a erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) B6191-90015a besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) B6191-90015a verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) B6191-90015a. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) B6191-90015a gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
