Benutzeranleitung / Produktwartung 7.25 des Produzenten HP (Hewlett-Packard)
Zur Seite of 46
USER’S MANUAL 7.25 MOTORIZED TREADMILL MODEL NUMBER: 7.25 USER WEIGHT LIMITATION: 350lbs (160 kgs) SERVICE NUMBER: 0800-09 72100 SERIAL NUMBER (found on frame):.
2 7.25 TREADMILL PRECAUTIONS Precautions : WA RN ING : To reduce the risk of burns, fire, electric shock, or in jury to persons, read the following important precauti ons and information before operating the treadm ill.
www.smoothfitness.com 3 POWER REQUIREMENTS Power Requirements : IMPROPER CONNECTION OF THE EQUIPM ENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECT RIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SER VICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED.
4 7.25 TREADMILL PREASSEMBLY Open the boxes : You are now ready to open the bo xes of your ne w equipme nt. Make sure to inventory all of the parts that are include d i n the bo xes. Check the Hardware Comparison Ch art for a full count of th e number of parts included for this product to be assemble d prop erly.
www.smoothfitness.com 5 CONTENTS CHECKLIST Carton contents : For your convenience, we have identified the contents of the shipping carton. Please ch e ck to make sure you have all of the components before assembly. This chart is provided to hel p you id entify the component s used in th e assembly of this product.
6 7.25 TREADMILL HARDWARE COMPARISON CHART Hardware chart : For your convenience, we have identified the hard ware used in t he assembly of this product. This chart is provided to help you identify those items that may be unfam ili ar to you. No. Description Qty.
www.smoothfitness.com 7 PARTS LIST No. Description Qty. Order No. GM BOM NO. 7.25-100 Console Assembly 7.25-101 Overlay 1 7.25-101 7.25-102 Computer Insert 1 7.25-102 PL-COI-LED17 7.25-103 Console PC Board 1 7.25-103 7.25-104 Console Housing - Upp er 1 7.
8 7.25 TREADMILL PARTS LIST No. Description Qty. Order No. GM BOM NO. 7.25-307 Computer Wire - Upper 1 7.25-307 7.25-308 Motion Control Sensor Wire - Middle 2 7.25-308 7.25-400 7.25-401 Base Frame 1 7.25-401 IR-WD-BF-XT220 7.25-402 Safety Key W ire - Lower 1 7.
www.smoothfitness.com 9 PARTS LIST No. Description Qty. Order No. GM BOM NO. 7.25-506 Driving Belt 1 7.25-506 RU-PB-250J -7 7.25-507 Motor Control Board 1 7.25-507 7.25-508 Elevation Control Board 1 7.25-508 7.25-509 Elevation Support Tube 1 7.25-509 IR-WD-EF-XT220 7.
10 7.25 TREADMILL PARTS LIST No. Description Qty. Order No. GM BOM NO. 7.25-803 ＃ 8 × 12mm Screws 8 7.25-803 IR-BOLT- 02-03-M4X1 2-S 7.25-804 M8 x 15mm Bolt 2 7.25-804 IR-BOLT-01-08-M8X15X15 7.25-805 M8 x 50mm Bolt 8 7.25-805 IR-BOLT-01-01-M8X50X50 7.
www.smoothfitness.com 11 PARTS LIST No. Description Qty. Order No. GM BOM NO. 7.25-837 C Fixed 2 7.25-837 IR-BOLT-06-03-M 10C 7.25-838 M10 × 43mm Bolts 2 7.25-838 IR-BOLT-01-10-M10X42 7.25-839 Cushion Pad 8 7.25-839 AP-006 7.25-840 M10 × 40mm Screws 1 7.
12 7.25 TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY..
www.smoothfitness.com 13 PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY. 805 208 209 805 207 801 801 204 208 804 205 206 209 804 203 201 805 202 203 805 202 20.
14 7.25 TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY..
www.smoothfitness.com 15 PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY. 842 814 419 421 815 810 420 418 809 813 837 411 410 423 811 422 812 408 808 409 809 81.
16 7.25 TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY. 826 827 819 515 514 513 512 516 511 809 517 806 513 514 827 515 520 819 516 809 509 814 831 5.
www.smoothfitness.com 17 PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY. 604 602 832 605 822 818 602 603 809 601.
18 7.25 TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY. 702 703 840 814 704 701 834 835 422 836 837 841 413 706 707 835 834 814 708 838 839 828 833 8.
www.smoothfitness.com 19 ASSEMBLY STEP 1 : Remove your treadmill from the carton and place it on the floor in an open area. Connect the Middle Section Computer Wire (3 07) to the Lo wer Section Computer Wire (403) and the Middle Section Safet y Key Wire (306) to the Lower Section Safet y Key Wire (402).
20 7.25 TREADMILL ASSEMBLY STEP 2 : First connect the Motion Control Wire Midd le Section (308) to Motion Contr ol Wire Lower Section (208) as shown. Insert the Handlebar (201) into the Upright T ube (301) and secure using t wo M8 x 15mm Bolts (804), Four M8 x 50mm Bolts (805) and attach Handlebar Lower Cover (202) to Base Frame (401).
www.smoothfitness.com 21 ASSEMBLY STEP 3 : Attach the Front Handlebar (204) on the Upright Tube (301 ) and secure using four M8 x 50mm Bolts (805). 805 X4 204 301 301 805.
22 7.25 TREADMILL ASSEMBLY STEP 4 : Connect the Upper Section Computer Wire (109) to the Middle Section Computer Wire (308) and the Upper Section Safety Key Wire (108 ) to the Middle Section Safety Key Wire (307).
www.smoothfitness.com 23 ASSEMBLY STEP 5 : First Fix the Ground Wire (110) to the Upright Tube (30 1) and secure using one #8 x 19mm Metal Screws (807). Attach the Upright Cover RR (305) and the Upri ght Cover LL (302) to the Upright T ube (301). Secure using four #8 x 19mm Scre ws (806) and four #8 x 19mm Metal Screws (807).
24 7.25 TREADMILL ASSEMBLY STEP 6 : Secure by tightening the Fi x Bolts Sets (412). The Fix Bolts Sets (412) are pre-assembled to the Base Frame (401) at the factory.
www.smoothfitness.com 25 STABILIZER ADJUSTMENT FOLLOW THESE IN STRUCTIONS TO LEVEL YOUR TREADMILL : An uneven floor or improper stabil izer level can cause the treadm ill to wobble during use as well as the inclin e ad justment to function incorrectly.
26 7.25 TREADMILL FOLDING INSTRUCTIONS How to fold treadmill: Treadmill can be folded for s pace saving storage. T o do this follow instructions here: Lift the deck carefull y from rear CL IC K You will hear a click sound when the lock engages .
www.smoothfitness.com 27 UNFOLDING INSTRUCTIONS How to unfold treadmill: To unfold treadmill for use follo w the instructions here: Re lease Le ver Lift the deck fro T ip the release lever w ith your foot… portation w heels.
28 7.25 TREADMILL TRANSPORT INSTRUCTIONS TRANSPORT INSTRUCTIONS : To roll away for storage simply grab the rear deck, lift slightly and roll to desired locatio n. Lift the deck from the rear so that the trea dmill rests on the front transportation wheels.
www.smoothfitness.com 29 A B C D E F P G H I K L M N O J Time/Distance/Height A B Speed/Calories/Weight Mode C D Motio n Control On/Off Metric/English E F Stop/Enter Incline Up/Down G H Speed Profile .
30 7.25 TREADMILL COMPUTER OPERATION CUSTOM PROGRAM When selecting the custom program from C1 to C3, follow the instructions to press this button an d save the program as your own custom workout program. Follo w the C1-C3 CUS T OM PROGRAM operating instructions for details.
www.smoothfitness.com 31 COMPUTER OPERATION OPERATING INSTRUCTIONS: QUICK START When the treadmill is in POWER ON status , press the START button to activate the QUICK START program. The SPEED LED will count down 3 seconds with 3 short beep sounds then start fr om 0.
32 7.25 TREADMILL COMPUTER OPERATION SELECT OPERATING PROGRAM After completing the user information set up the SPEED PROFILE LED windo w will show “ P1 ”. Press the SPEED UP/DOWN buttons to select a P1 – P8 program or C1-C3 user program then press the STOP/ENTER button to confirm.
www.smoothfitness.com 33 COMPUTER OPERATION PROGRAM 4 – INTERVAL INCLINE If P4 is selected, the TIME LED window shows the factory setting value “24:00” an d the PULSE/INCLINE LED windo w shows a blinking “L 1”. Press the SPEED UP/DOWN buttons to select the intensity of wo rkout from L1 to L12 then pres s the STOP/ENTER button.
34 7.25 TREADMILL COMPUTER OPERATION PROGRAM 8 – HEART RATE CONTROL If P8 is selected, the TIME LED window shows the factory setting value of “60:00” and is blinking. Press the SPEED UP/DOWN buttons to adjust the workout time. Every adjustable section equ als 3 mi nutes.
www.smoothfitness.com 35 COMPUTER OPERATION When the TIME counts down to 0, the HEART RATE CONT ROL program is completed and the computer enters a one- minute COOL DOWN program. After the COOL DOWN program the comput er will return to POWER ON status.
36 7.25 TREADMILL COMPUTER OPERATION USING THE CHEST BELT HEART RATE MONITOR (optional featu re depend ant on model purchased): For proper operation, the chest belt should b e worn across the fr ont of your body just below the chest line as sho wn in the drawing.
www.smoothfitness.com 37 MOTION CONTROL OPERATION MOTION CONTROL : Walking belt speed can be inc reased, decreased or stopped using the Moti on Control sensors on the handlebars.
38 7.25 TREADMILL MAINTAINENCE HOW TO MA INTAIN THE TREADMILL : Proper maintenance is very important to en sure your treadmill is always in top working cond ition. Improper maintenance could cause damage or shorten the lif e of your trea dmill and exceed the LIMIT ED WARRANTY coverage.
www.smoothfitness.com 39 MAINTAINENCE CLEANING : Routine cleaning of your trea dmill will extend the product's life. • Warning : To prevent electrical shock, be sure the power to the treadmill is OFF and the power cord is unplugge d from the wall electrical outlet before attempting an y cl eaning or maintenance.
40 7.25 TREADMILL WARRANTY Read and follow the Assembly-instructions and the User ’s-Manual before using this product. Warranty Coverage : Smooth Fitness GmbH ("Smooth Fitness") warrants to the original owner that each new product to be free from defects in workmanship and material.
www.smoothfitness.com 41 IMPORTANT STEPS Warning : Before using this product, please consult your person al physici an for a complete physical examination. Freque nt and strenuous exercise should be approv ed by your doctor first. If any discom fort should result from your use of this product, stop exercisi ng and consult your doctor.
42 7.25 TREADMILL TARGET HEART RATE Finding your puls e : To make sure your heart is beating in it s target zone, yo u’l l need to know how to monitor your heart rate. The easiest wa y is to feel the pulse in the carotid artery on either sid e of your neck, between the windpipe and the large neck muscles.
www.smoothfitness.com 43 MUSCLE CHART Targeted muscle groups : The exercise routine that is performed o n thi s product will de velop primarily lo wer bod y m uscle groups.
44 7.25 TREADMILL STRETCHING ROUTINE Warm up and cool do wn : A successful exercise program consists of a warm-up, aero bic e xer cise, and a cool-d o wn. Do the entire program at least two and preferably three times a week, resting for a day bet ween workouts.
www.smoothfitness.com 45 TROUBLESHOOTING Troubleshooting NOTE : Do not touch any internal electric wires without consultin g the manufacturer. Treadmill will not start : 1.
Copyright © 2005 Greenmaster Industrial Co rp. All rights re served. Smooth Fitness PO BOX 436 Farnborough GU14 4BS United Kingdom Phone: 0800-09 72 100 e-mail: info@smoothfitness.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) 7.25 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) 7.25 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) 7.25 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) 7.25 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) 7.25 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) 7.25 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) 7.25 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) 7.25. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) 7.25 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
