Benutzeranleitung / Produktwartung HWM55-10 des Produzenten Haier
Zur Seite of 18
Full Automatic W ashing Machine with Pump This manual is for Please read this manual carefully before using. Retain it for future reference. HWM55-10 User's manual 0030806972C.
Contents Names of the parts................................................................................................1 Safety precautions ................................................................................................2 Installation and adjustment .
Meaning and description of the symbols Names of the parts Warning sign Forbidden sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user .
Safety precautions Do not damage the power cord, bend , extend, twist, bind or alter it by force. Do not press or nip it with weight. If the power cord or the power plug is bad, or the power plug becomes flexible, to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department.
Safety precautions Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.) The handicapped or children without care shall not use the machine.
Installa tion and adjustment The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine.
How to change the direction of the drain hose Usage of the drain hose The drainage shall be smooth with the drain hose 1.P ut the drain hose up to suitable position. Do not put it on ground. Notes: the mouth of drain pipe should higher than the water level of washing tub for avoiding to siphon phenomenon during drain.
Install th e w ater inlet h ose 6 1. Attach the water inlet hoses to the water faucet. Using pliers, tighten the coupling. ( As figure 1) NOTE : Do not over tighten. Damage to the valves can result. 2. Connect the other ends to the water inlet valve .
Pr epar a tion bef or e washing Confirm if there's special requirment for the laundries. Clear the pocket. Take out the coins , sand, hairpins etc. Fasten the buttons and zippers. When the pulsator is running , the buttons of the laundries may cause noise.
The capacity of washing and spinning of the machine refer to the larg est weight of the standard laundries under dry c ondition that can be was hed or spin ned in one time. One time washing quantity shall be lower th an the rated capacity . The thickness, size, type of the cloth will inf- luence the actual washing capacity.
U se the operation buttons A.Description of the function of the buttons Mode and meaning of indicator light Flashing: indicate the running program On: indicate the program about to run,or indicate the selected mode With it you can select one or several processes of soak,wash,rinse and spin.
After the power is switched on, press it to start the machine. During working, push it to pause. During pause, push this button to restart and go on working. START/P AUSE button Remarks: After pressing POWER ON/OFF to connect power supply , if the washing machine lasts idle more than 10 min, it would automatically shut off the supply.
B .Operating procedure and e xplana tions for the buttons 2.Push the PROGRAM SELECTION button to select the suitable automatic program 3.Push the PRO CESS SELECTION button to select suitable progr ams After switching on the power, the machine will set to wash-rinse-spin program automatically .
Even there's no water in the tub, t he spinning will sta rt after a certain period. Do not use soak process for woolen laundries . Wash the laundries that are prone to lose colors separately f rom other laundries. The pulsator will not rotat e unless the water is fil led to select ed water lev el.
After switching on, the washing machine reserved wash program will be automatically set inactive. If you desire a wash cycle to end at a reserved time, you can press the " RESERVATION " button over 2 seconds to set a reserved wash program. Refer to T he butt on of " RESERVATION " on page 1 1.
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. 1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair . If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company .
The side of connection between the water inlet hose and the washing machine The side of connection between the jointer of the water inlet hose and the water faucet User's manual Name Components o.
Ein wichtiger Punkt beim Kauf des Geräts Haier HWM55-10 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Haier HWM55-10 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Haier HWM55-10 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Haier HWM55-10 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Haier HWM55-10 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Haier HWM55-10 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Haier HWM55-10 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Haier HWM55-10. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Haier HWM55-10 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
