Benutzeranleitung / Produktwartung Model Year 2002 des Produzenten Giant
Zur Seite of 33
LAFREE TWIST Model Year 2002 Owners Manual June 2001..
Pag. 2 . Contents: 1. Read this manual ! .............................................................................................. 3 1.1 Trademarks .............................................................................................. 3 1.
Pag. 3 . 1. Read this manual ! Please read all information in this manual carefully to gain maximum performance, safety and enjoyment from your Lafree Twist electric bicycle. Congratulations! You have just pedalled into the exciting world of electric power assistance for bicycles.
Pag. 4 . 2. What it’s called 2.1 General 1. Handlebar 2. Handlebar stem (2 versions: gents and ladies) 3. Power control switch - left side 4. 3-speed hub gear shifter - right side 5. Frame 6. Seat tube 7. Front fork 8. Wheel 9. Tyre 10. Tread 11. Side wall 12.
Pag. 5 . 2.2 Battery and charger 1. Battery 2. Battery lock 3. Grip 4. Energy indicator 5. Charging socket 6. Socket cap 7. Charger 8. Charger plug 9. Power source plug 10. Refresh button 2.3 Handlebar and stem 1. Handlebar 2. Handlebar stem (2 versions: gents and ladies) 3.
Pag. 6 . 2.4 Position of the serial numbers Please record Lafree’s bike serial number and battery serial number for future reference. The serial number of the bike is stamped into the left rear “dropout” of the frame. The dropout is the piece of frame that holds the axle of the rear wheel (see fig.
Pag. 7 . 3. Fit and safety 3.1 Fit Make sure the bike fits. A bike that’s too big or too small for the rider is harder to control and can be uncomfortable or dangerous. Frame size. Your dealer will have recommended the best frame size for you, based on the information provided.
Pag. 8 . 3.2 Saddle position Correct saddle adjustment is important in getting the best performance and comfort from your bicycle. a. Up and down adjustment .
Pag. 9 . 3.3 Handlebar height and angle a. Handlebar stem height. You can raise or lower the handlebars. Loosen the stem height adjuster bolt (see fig. 13) by turning it anti-clockwise three or four turns . If the bolt rises but the stem doesn’t move, tap the bolt carefully down, using a plastic or wooden hammer.
Pag. 10 . 3.4.2 Reflectors Reflectors are important safety devices which are designed as an integral part of Lafree. The reflectors are designed to pick up and reflect street lights and car lights in a way that helps you to be seen and recognised as a moving bicyclist.
Pag. 11 . 3.5.3 Brakes Visually inspect the brakes for proper cable routing (see fig. 14a) . Squeeze the brake levers. Brake levers should engage brake shoes at approximately half way through their arc, or within about 2.5 cm. (an inch) of handlebar grip.
Pag. 12 . 4. Riding safely and responsibly NOTE: Riding a bicycle involves certain risks, including damage and injury. By choosing to ride a bicycle, you assume personal responsibility for those risks.
Pag. 13 . 5. Battery and charger operation 5.1 Battery detachment , charging & installation 5.1.1 General CAUTION: Please read the following general safety tips for charging or refresh charging Lafree Twist ’ s battery . • The charging area must be level , well ventilated , free f rom moisture and protected against direct sunlight.
Pag. 14 . Step 3. P lace the battery in a stable position, in such a way that the energy indicator is visible . Step 4. Remove the cap from the battery’s charging socket, which is located at the bottom of the battery. Step 5. Put the charger plug into the battery’s charging socket with the arrow mark UP .
Pag. 15 . Step 8. Disconnect the power source plug from the electric point . Step 9. Disconnect the charger plug from the battery . Step 10. Mount the battery onto the bicycle (step 2 and 1 in reversed order). Make sure that the battery is secured in “ LOCK ” position , so that it can not move sideways .
Pag. 16 . Step 3. P lace the battery in a stable position, in such a way that the energy indicator is visible . Step 4. Remove the cap from the battery’s charging socket, which is located at the bottom of the battery. Step 5. Put the charger plug into the battery’s charging socket with the arrow mark UP .
Pag. 17 . Refresh-charging: LIGHT ON CHARGER HOW LONG DOES IT TAKE ? WHAT’S HAPPENING ? 1. RED light blinks 0.9 sec “on” / 0.1 sec “off” Just a few moments Charging will start soon (“waiting”) 2. Push “REFRESH” button on the charger 3.
Pag. 18 . 5.1.5 Batter y capacity, range and c harg ing t ime LEDs illuminated Energy available Remaining range* [km.] Charging t ime ** 1 ( blinking ) Less than 1 % < 1 km. 4 ~ 5 hours 1 1 ~ 20 % < 5 km. 3 ~ 4 hours 2 21 ~ 40 % 5 ~ 15 km. 2 ~ 3 hours 3 41 ~ 60 % 10 ~ 20 km.
Pag. 19 . It may be clear that it’s very difficult to say how far you can ride with your power assisted Twist with a full battery, simply because there are too many factors that have influence. Under the best possible circumstances, you can cycle • max.
Pag. 20 . • Inspect the battery periodically for cracks, unusual residue, or other abnormal appearance. Do not use a battery with cracks or breaks in the casing. • Do not attempt to use the Twist’s battery as a power supply for anything other than a Lafree Twist.
Pag. 21 . 6. How things work 6.1 General It is extremely important to the performance, enjoyment and safety of your Lafree Twist and yourself to understand how many of the features of Lafree Twist operate.
Pag. 22 . LIGHT ON POWER CONTROL SWITCH: STEADY OR BLINKING HOW LONG DOES IT TAKE ? WHAT’S HAPPENING ? Steady light 2 seconds After switching from “OFF” to “ON” or “ECO”. System is okay. There’s a problem. Switch “OFF” and back “ON” again.
Pag. 23 . rotating reduces clamping force. Less than half a turn of the tension adjusting nut can make the difference between safe clamping force and unsafe clamping force. NOTE: Once the quick-release is installed in the hub axle by the manufacturer or the dealer, it never needs to be removed unless the hub itself requires servicing.
Pag. 24 . 6.3.5 Installing a quick-release front wheel (a) Rotate the quick-release lever so that it curves away from the wheel (see fig. 31 and 35). This is the “OPEN” position (you can read “OPEN” on the lever).
Pag. 25 . 6.5 Gear changing Lafree Twist is equipped with internal rear gear hub. The gear changing mechanism on your bicycle consists of a grip shifter on the handle bar and an i nternal gear hub .
Pag. 26 . 6.7 Lighting system The electricity for the lighting equipment (front and rear light) is provided by the dynamo, attached to the left side of the front fork.
Pag. 27 . 6.10 Luggage carrier If you carry luggage on the carrier, make sure everything is securely fixed and free from the rear wheel, chain, etc. Make sure the total weight of the luggage does not exceed the maximum weight of 25 kg.
Pag. 28 . If you want to learn about service and repair work on your bike, you have three options: 1. Ask your dealer whether copies of the manufacturer’s installation and service instructions for the components on your bike are available. 2. Ask your dealer to recommend a book on bicycle repair.
Pag. 29 . • Check the frame (particularly in the area around all weld joints), the handlebar, the stem and the seat post for any deep scratches, cracks or discoloration. These are signs of stress-related fatigue and indicate that a part is at the end of its useful life and needs to be replaced.
Pag. 30 . 8.3 Tightening torque No. Description Tightening torque [ Nm.] 1 Stem height adjuster bolt 20 ~22 Nm 2 Handlebar clamp bolt 13 ~15 Nm 3 Stem inclination bolt 15 ~18 Nm 4 Crank arm bolts 35 ~45 Nm 5 Wheel axle bolts (rear) 30 ~45 Nm 6 Brake lever bolts 5 ~9 Nm 7 Saddle retention bolt 8 ~12 Nm 8 Seat clamp bolt 15 ~16 Nm 1.
Pag. 31 . 9. Precautions and procedures 9.1 Emergency equipment and knowledge You should never go for a bike ride without the following emergency equipment and knowledge: • Allen wrenches 4 mm.
Pag. 32 . WARNING: Riding your Lafree Twist with a flat or under-inflated tyre can seriously damage the rim, tyre, tube and bicycle, and can cause you to lose control and fall. 9.3 If you break a spoke (a) A wheel with a loose or broken spoke is much weaker than a fully tensioned wheel.
Pag. 33 . 11. Dealer service 11.1 About your dealer Your dealer is here to help you properly service and maintain your Lafree electric bicycle, as well as help you select and understand any products and accessories you wish to examine and purchase.
Ein wichtiger Punkt beim Kauf des Geräts Giant Model Year 2002 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Giant Model Year 2002 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Giant Model Year 2002 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Giant Model Year 2002 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Giant Model Year 2002 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Giant Model Year 2002 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Giant Model Year 2002 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Giant Model Year 2002. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Giant Model Year 2002 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.