Benutzeranleitung / Produktwartung T2010 des Produzenten Fujitsu
Zur Seite of 198
User’ s Guide Lear n ho w to use y our Fujitsu Lif eBook T2010 notebook.
Cop yright and T rademark Inf ormation Fujitsu Computer Systems Co rporation has made every effort to ensure the accu racy and completeness of this document; however , a s ongoing development ef forts are continually im proving the capabilities of our products, we canno t guar antee the accuracy of the contents of this document.
© Copyright 2007 Fujitsu Computer Syst ems Corporation. All rights reserved. No part of this publication ma y be copied, reproduced, or transl ated, without prior written consen t of Fujitsu. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu.
IMPOR T ANT SAFETY INSTR UCTIONS This unit requires an AC adapter to operate . Use only UL Listed I.T . E. Class II Adapte rs with an output rating of 16 VDC, with a curr ent of 3.
Recyc ling y our batt ery Over time, the batteries that r un your mobile computer will begin to hold a char ge f or a shorter amount of time; this is a natu ral occurrence for all batteries. When this oc curs, you may want to replac e the battery with a fresh one*.
Contents Preface About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Conventions Used in the Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Fujitsu Contact Information .
7 Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Opening the Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Using the System as a Tablet . .
8 Chapter 2 Getting Started wi th Your LifeBook Power Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Connecting the Power Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 PC Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Installing PC Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Removing PC Cards . . . .
10 Chapter 5 Care and Maintenance Caring for your Life Book Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Cleaning your LifeBook not ebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Storing your LifeBook notebook .
11 Glossary/Regulatory Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 Appendix A: WLAN User’s Guide Before Using the Optional Wirele ss LAN .
12 Appendix B: Fingerpr int Sensor Device Introducing the Fingerprint Sens or Device . . . . . . . . . . . . . . . . . . . . . . . . 175 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 Installing OmniPass .
13 Preface About This Guide The LifeBook T2010 notebook fro m Fujitsu Computer Systems Corpor ation is a powe rful convertible computer . It can be used either as a standard notebook using keyboard input, or in tabl et configuration using pen input.
14 - About This Guide Fujitsu Contact Information Service and Suppor t Y ou can contact Fujitsu Service and Support in the following ways: • T oll free: 1-800-8Fujitsu (1-800-838-5487) • E-mail: 8fujitsu@us.fujitsu.c om • W e bsite: http://www .
15 - About This Guide • Purchase date • Conditions under which the problem occurred • Any error messages that have occurred • T ype of device connected, if any Fujitsu Shopping Online Y ou can go directly to the online by going to the website at: www .
16 Chapter 1 Getting to Kno w Y our LifeBook Overview This section describes the components of your Fujitsu LifeBook T2010 notebook. W e strongly recommend that you read it before using your notebook – even if you are already familiar with notebook computers.
17 - Locating the C ontrols and Connectors Locating the Contr ols and Connectors Connectors and peripheral interfaces on the Life Book T2010 notebook and the optional port replicator allow you to connect a variety of devices. Sp ecific locations are il lustrated in Figures 2 through 6 .
18 - Locating the C ontrols and Connectors Dock port Connect the note book por t replicator or other app rov ed docking device . Ref er to documentation accomp anying the do ck f or more inf ormation. Security loc k slot The security slot allows yo u to secure the notebook using compatible loc king de vices.
19 - Locating the C ontrols and Connectors Figure 2. LifeBook notebook with display open Displa y P ane l Status Speaker K eyboard Lif eBook Secur ity/ P ow er/Suspend/ T ablet PC Buttons Resume Butto.
20 - Locating the C ontrols and Connectors T op Components The following is a brief description of your LifeBook notebook’ s top components. Displa y P anel The display panel is a color LED panel with backlighting for the display of text and graphics and active digitizer functionality .
21 - Locating the C ontrols and Connectors Scroll But ton The scroll button is used in conjunction with the Qu ick Point cursor control to navigate through pages quickly and easily . Left Button This button acts the same as the left button on a mouse.
22 - Locating the C ontrols and Connectors Figure 3. LifeBook note book left-side panel Left-Side P anel Components The following is a brief description of your LifeBook notebook’ s left-side components. PC Card Slot The PC Card Slot allows you to install a T ype I or T ype II PC Card.
23 - Locating the C ontrols and Connectors Smart Card Slot A dedicated Smart Card slot is provided on your not ebook. Smart Cards are the same size and shape as credit cards, but they contain an integrated microprocessor chip. See “Smart Card Reader” on page 85.
24 - Locating the C ontrols and Connectors Figure 4. LifeBook notebook right- side panel Right-Side P anel Components The following is a brief description of your LifeBook notebook’ s right-side components. Headphone Jac k The headphone jack allows you to conne ct headphones.
25 - Locating the C ontrols and Connectors IEEE 1394 (4-pin) Jac k The 4-pin 1394 jack is used to connect between your notebook and an IEEE 1394 peripheral such as a digital video camera. See “IEEE 1394 Port” on page 91. Micr ophone Jack The microphone jack allows you to connect an external mono microphone.
26 - Locating the C ontrols and Connectors Figure 5. LifeBo ok notebook back panel Bac k P anel Components Following is a brief description of your LifeBook notebook’ s back panel components. Gigabit LAN (RJ-45) Jac k The internal LAN (RJ-45) jack is used for an internal Gigabit (10Base-T/100Base-Tx/1000Base-T) Ethernet LAN connection.
27 - Locating the C ontrols and Connectors Air V ents The air vents allow air to circulate thr ough the system to cool down the components. Anti-theft Lock Slot The anti-theft lock slot allows you to at tach an optional physical lock down device.
28 - Locating the C ontrols and Connectors Figure 6. LifeBook noteb ook bottom panel Bottom Components The following is a brief description of your LifeBook notebook’ s bottom panel components. Battery Latches The battery latches are used to secure th e Lithium ion battery in the battery bay .
29 - Locating the C ontrols and Connectors Air V ents The air vents allow air to circulate thr ough the system to cool down the components. Memory Upgrade Compartment Y our notebook comes with high speed Double Da ta Rate 2 Synchronous Dynamic RAM (DDR2 SDRAM).
30 - Status I ndicator P anel Figure 7. Status Indicator P anel Status Indicator P anel The S tatus Indicator displays sym bols that correspond to a specific component of your Fujitsu LifeBook notebook. These symbols tell you how each of those components is operating.
31 - Status I ndicator P anel Hard Drive Access Indicator The Hard Drive Access indicator shows whether your internal hard drive is being accessed . NumLk Indicator The NumLk indicator states that the integral keyboard is set in ten-key numeric keypad mode.
32 - Display P anel Figure 8. Opening the Displ ay P anel Displa y P anel Y our LifeBook T2010 notebook contains an LED display panel that is backlit for easier viewing in bright environments. The convertible design of your notebook allows you to open the display fully , rotate it in either direction 180 degrees, and lay it face up on the keyboard.
33 - Display P anel Opening the Displa y P anel Lift the display backwards, being careful not to t ouch the screen with your fi ngers, until it is at a comfortable viewing angle. (Figure 8) Using the System as a T ablet If you would like to use the system as a tablet, perform the following step s.
34 - Display P anel Adjusting Display P anel Brightness Once you have turned on your T ablet PC, you may want to adjust the brightness level of the screen to a more comfortable viewing level. There are three ways to adjust the brightness: keyboard, power management utility , and Fujitsu Menu.
35 - Display P anel Using P o wer Management to Adjust Brightness T o adjust brightness with th e power management utility ,: Windows XP: Click S tart -> Control Panel. If you are not in Classic V iew , select it in the left panel. Double-click the T ablet and Pen Settings icon, then se lect the Display tab.
36 - K eyb oard Ke yboar d Figure 12. Ke yboard Using the Ke yboar d Y our Fujitsu LifeBook notebook has an integral 84-k ey keyboard. The keys pe rform all the standard functions of a 101-key keyboard, including the W indow s keys and other specia l function keys.
37 - K eyb oard • Numeric keypad: Y our notebook allows certain keys to serve dual purposes, both as standard characters and as numeric and ma thematical keys. The ability to toggle between the standard character and numerical keys is controlled through the [NumLk] key .
38 - K eyb oard Function Ke ys Y our LifeBook notebook has 12 function keys, F1 through F12. The functions assi gned to these keys dif fer for each application.
39 - Quick P o int P ointing Device/T ouch Screen Quic k P oint P ointing Device/T ouch Screen Figure 13. T ouchpad pointing device The Quick Point is built into your Li feBook notebook. It is used to contro l the movement of the cursor to select items on your display panel.
40 - Quick P o int P ointing Device/T ouch Screen Clic king Clicking means pushing and releasing a button. T o left-click, move the cursor to the item you wish to select, press the left button once, and then immediatel y release it.
41 - Quick P o int P ointing Device/T ouch Screen Drag ging Dragging means pressing and holding the left button, while moving the cursor . T o dr ag, move the cursor to the item you wish to move. Press and hold the left button while moving the item to its new location and then release it.
42 - Quick P o int P ointing Device/T ouch Screen Quic k P oint Control Adjustment The W indows Control Panel a llows you to customiz e your Quick Point with se lections made fr om within the Mouse Properties dialog box.
43 - Quick P o int P ointing Device/T ouch Screen Clicking on T ouch Screen T o left-click, touch the object you wish to select and then lift the stylus tip immediately . Right-Clicking on T ouch Screen Windows V ista Right-click can be accom plished by holding the pen down until a circular icon appears.
44 - Quick P o int P ointing Device/T ouch Screen Calibrating the T ouch Screen In order to ensure accurate trac king between the stylus and cursor , you must run the T ouch Screen Calibration Utility before you use the T ouch Screen fo r the first time, or afte r you change the display resolution.
45 - Quick P o int P ointing Device/T ouch Screen T o run the calibration utility: 1 Go to Star t -> Cont rol P anel. If you are no t in Classi c View , select “Switch to Classic View” in the left panel. Windows XP T ablet PC Edition: Double -click the T ab let and P en Settings icon and sele ct the Settings tab .
46 - Quick P o int P ointing Device/T ouch Screen 2 Attach the end of the pen tethe r with the larger loop to the atta chment point on y our tab let. T o do so , inser t the end of the pen tet her through the att achment point, then f eed the pe n through the large lo op in the tether .
47 - V olume Control V olume Control Y our Fujitsu LifeBook notebook has multiple volume controls which interact with each other . Controlling the V olume The volume can be controlled in several dif ferent ways: • V olume can be changed or muted from within the V olume Control in the system tray .
48 - Lif eBook Security/T ablet PC Buttons Figure 14. LifeBook T2010 Note book Security/T ablet PC Buttons LifeBook Security/T ablet PC Buttons A unique feature of your Li feBook T2010 notebook is the ar ray of Security and T a blet PC buttons.
49 - Lif eBook Security/T ablet PC Buttons Pre-logon b utton functions All five buttons can be used befo re logging on to W indows (i.e., the W indows logon sc reen is displayed). Three of the buttons have secondary functions. See T able 2 for information about the pre-logon functions.
50 - Lif eBook Security/T ablet PC Buttons T able 2. Pre-logon T ablet PC Button Functions When you press the [Fn] button then press and release the [Page Up] butt on, each press of the button will act as if you had pressed the [Escape] key .
51 - Lif eBook Security/T ablet PC Buttons When you press the [Screen Rotation] button when the system is in pre-boot, the system screen orientation changes from portrait (vertical) to landscape (horizontal ) or from landscape to portrait.
52 - Lif eBook Security/T ablet PC Buttons Function / Fujitsu Menu Utility Button The [Function] button works in conjunction with the other application buttons to provide additional functionality for the buttons. Re fer to specific details above. P ost-logon b utton functions All five buttons can be us ed after logging on to W indows.
53 - Lif eBook Security/T ablet PC Buttons When the system is changed to tabl et configuration, the orientation auto matically changes to portrait mode by default. When you press the [Screen Rotation /Display Switching] button, the system screen orientation changes from portrait (vertical) to landscape (horizontal) or fr om landscape to portrait.
54 - Lif eBook Security/T ablet PC Buttons Windows XP: 1 Doub le-click on the T ablet and P en Settings icon in the Control P anel. 2 Select the T ablet Buttons tab and select the b utton y ou would lik e to change from the list. 3 Click [Ch ange] and open the drop do wn list in the Action: field.
55 - Lif eBook Security/T ablet PC Buttons P assw ords The user and supervisor password may be set on this notebook. A supervisor password is typically the same for all tablets and notebooks in a work group, of fice, or company to allo w for system management.
56 - Lif eBook Security/T ablet PC Buttons Setting Supervisor P assw ord Y ou must have set a supervisor pa ssword before setting any user passwords. The supervisor password can bypass the user password. 1 Go to the Start menu. 2 Click on Run . 3 T ype in: C:Pr ogram FilesFujitsuSecu rity P a nel ApplicationSupervisor FJSECS.
57 - Lif eBook Security/T ablet PC Buttons From Standb y/Hibernation State 1 Press your Suspend/Resume but ton. 2 When the Secu rity Indicator flashes , enter the pass word and pre ss Enter b utton.
58 - Lif eBook Security/T ablet PC Buttons Windows V ista systems: T o change the default for W indows V ista systems when the cover is closed: 1 Open the system Control P anel. 2 If the displa y is in Categor y view , click Change battery s e ttings under t he Mobile PC ca tegor y .
59 - Lif eBook Security/T ablet PC Buttons Remo ving Security P anel Application with P ass wor ds Still Active Using this feature will not allo w any changes to the password. Windows XP: User: 1 Go to Star t -> Control P anel. 2 Open Add or Re move Pr ograms Pr operties in the Control P anel.
60 - Lif eBook Security/T ablet PC Buttons 4 When User Account Control bo x appears , click Continue . Supervisor: 1 Go to Star t -> Control P anel. 2 Open Ad d or Remove Pr ograms Pr operties in the Control P anel. 3 Select the Security P anel f or Supervisor in the list, and clic k Uninstall/Chang e .
61 Chapter 2 Getting Star ted with Y our LifeBook Figure 15. Connecting the A C Adapter P ower Sour ces Y our Fujitsu LifeBook notebook has th ree possible power sources: a primar y Lithium ion battery , an AC adapter or an optional Auto/Airline adapter .
62 - P ow er Sources Connecting the P o wer Adapters The AC adapter or optional Auto/Airline adapter provides power for operating your notebook and charging the batteries. Connecting the A C Adapte r 1 Plug the DC output cab le into the DC pow er jack of y our Lif eBook noteboo k.
63 - Starting Y our Lif eBook Notebook Star ting Y our LifeBook Notebook P ower On P ower/Susp end/Resume Button The Power/Suspend/Resume button is used to turn on your LifeBook not ebook from its off state. Once you have connected your AC adapter or charged th e internal Lithium ion battery , you can power on your LifeBook notebook.
64 - Starting Y our Lif eBook Notebook Boot Sequence The procedure for starting-up your notebook is termed the Bootup sequence and involves your notebook’ s BIOS. When your LifeBook notebook is first turned on, th e main system memory is empty , and it needs to find instructions to start up your notebook.
65 - Starting Y our Lif eBook Notebook BIOS Setup Utility The BIOS Setup Utility is a pr ogram that sets up the operati ng environment for your LifeBook notebook. Y our BIOS is set at th e factory for normal operating conditi ons, therefore there is no need to set or change the BIOS’ e nvironment to operate your notebook.
66 - Starting Y our Lif eBook Notebook The T rustedCore Menu provides shortcuts to th e following menus and information screens: • BIOS Setup • Diagnostic Screen • Boot Menu • Patent Information • System Information • Continue Booting Clicking on any of the fields will invoke the screen, info rmation, or action described.
67 - Starting Y our Lif eBook Notebook Star ting Windo ws Vista the first time In order to ensure that you receiv e the most benefits from the W indows Vi s t a operating system, it should be registered the first time you use it. 1 First of all, you will need to read and acce pt the End U ser Licens e Agreements (EULAs).
68 - Starting Y our Lif eBook Notebook 8 Windows will then boot up f or the first time. As noted abov e, the first time you initializ e your Windo ws Vista system, the screen will be blank f or appro ximately two minutes.
69 - Starting Y our Lif eBook Notebook Several additional windows will a ppear , prompting you to enter a name and description for your computer , an Administrator password, and a domai n name. Read the instructions on the screens carefully and fill in the information as directed.
70 - Starting Y our Lif eBook Notebook Control” window , you will be aske d for your permission to continue. Click [Cont inue] to continue. If you cancel the operation, the ClickMe! icon will a ppear on your desktop for later installation.
71 - P ow er Management P ower Management Y our Fujitsu LifeBook notebook has many options and features for conserving battery power . Some of these features are automatic and need no us er intervention. However , others depend on the parameters you set to best suit your operating conditions, such as t hose for the display brightness.
72 - P ow er Management Standb y (Sleep) Mode Standby (Sleep) mode in W indows saves the conten ts of your system memory during periods of inactivity by maintaining power to critic al parts. This mode turns off the CPU, display , hard drive, and all other internal components except those necessary to maintain system memory and for restarting.
73 - P ow er Management Hibernation (Save-to-Disk) Feature The Hibernation feature saves the c ontents of your notebook’ s system memory to the hard drive as a part of the Suspend/Resume mode. Y ou can enable or disable this feature. Enable or Disable the Hibernation Feature Windows V ista: The default settings are not enabled.
74 - P ow er Management Windows XP: The default settings are not enabled. T o enable or disable the Hibernation fe ature follow these steps: 1 F rom the Sta r t menu, select Sett ings, and then select C ontrol P anel. 2 F rom the Control P anel select P ow er Options.
75 - P ow er Management P owering Off Before turning off th e power, check that the hard drive/optical drive access indicator is off. If you turn off the power while accessing a disk there is a risk of d ata loss. T o ensure that your notebook shuts down without error , use the W indows shut down procedure.
76 Chapter 3 User -Installab le Features Lithium ion Battery Y our LifeBook notebook has a Lithiu m ion battery that provides power for operating your notebook when no external power source is available. The battery is durable and long lasting, but should not be exposed to extreme temperatures , high voltages, chemic als or other hazards.
77 - Lithium i on Batter y Rechar ging the Batteries If you want to know the condition of the primary Lithium ion battery , check the Battery Level indicator located on the S tatus Indicato r panel. The indicator changes as the battery level changes. The Lithium ion battery is recharged internally using th e AC adapter or Auto/Airline adapter .
78 - Lithium i on Batter y Low Battery State When the battery is running low , a low battery notif ication message will appe ar . If you do not respond to the low battery message, the batterie s will continue to dischar ge until they are too low to operate.
79 - Lithium i on Batter y Shorted Batteries The Status Indicator panel indicator associated with the Battery Level indicator displays the operating level available in that battery . If this display s hows a flashing red LED, it means the battery is damaged and must be replaced so it does not da mage other parts of your LifeBook notebook.
80 - Lithium i on Batter y Figure 1 6. Removing a Bat tery 2 F ollow steps 3 throu gh 6 in “Cold Swapping Batte r ies”. Batter y Bay Release Latches Batter y P ack I F THE L ITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED , YOU MA Y NOT BE AB LE TO USE YOU R NOTEBOOK OR CHARGE YOU R BATTER Y .
81 - Memory Stick/Secure Digita l Cards Figure 17. Installi ng a Memory St ic k or SD Ca r d Memory Stick/Secure Digital Car ds Y our LifeBook notebook supports Memory Sticks and Secure Digital (SD) cards, on which you can store and transfer data to and from a variety of digital devices.
82 - Memory Stick/Secure Digita l Cards Installing Memory Stick/SD Car ds Memory S tick and SD Cards are installed in the Memo ry S tick/SD Card slot. T o install a Memory Stick or SD Card, follow these steps : 1 See yo ur specific card manual for instructions on the in stallation of y our card.
83 - PC Cards Figure 18. Installing/Remov ing PC Card PC Car ds Y our LifeBook notebook supports T ype I and T ype II PC Cards which ca n perform a variet y of functions depending on which type of card you install. Some available PC Cards: • Gigabit Ethernet Local area network (LAN) cards • IEEE1394 cards • S-A T A II cards • IEEE802.
84 - PC Cards Installing PC Cards T o install a PC Card in the PC Card slot, follow these steps: 1 See your PC Card ma nual f or instructions on the installation of y our card. Some cards ma y require that y our notebook is off while installing them. 2 Make sure there is n o PC Card curren tly in the slot.
85 - PC Cards 1 Unloc k the card from the slot b y pressing the eject butt on associated with the slot in which the card is located. When pressed, the bu tton will pop out. 2 Firmly press the button again until it is flush with the not ebook. This will eject the card slightly out of the slot allowing y ou to remo ve the card.
86 - Memory Upgrade Modul e Memory Upgrade Module Y our Fujitsu LifeBook notebook comes with a minimu m of 512 MB of high speed Double Data Rate Synchronous Dynamic RAM (DDR2-533 SDRAM) factory installed. T o increase your notebook’ s memory capacity , you may install an additi onal memory upgrade module.
87 - Memory Upgrade Modul e 7 Insert the memory upgra de module at a 45° angle . Press the connector ed ge of the module firmly down and into the connector until it lodges und er the retaining clip. Y o u’ll hear a clic k when it is proper ly in place.
88 - Memory Upgrade Modul e Removing a Memory Upgrade Module 1 P erf or m steps 1 through 4 of Inst alling a Memor y Upgrade Module. 2 Pull the clips sidew a ys aw ay from each side of the memory upgrade module at the same time. 3 While holding the clips out, remov e the module by lifting it up and pu lling it a wa y from your notebook.
89 - Devi ce P or ts De vice P orts Y our Fujitsu LifeBook notebook and th e optional Port Replicator come equipped with multiple ports to which you can connect external devices including: disk drives, keyboards, printers, etc.
90 - Devi ce P or ts Univer sal Serial Bu s P orts The Universal Serial Bus 2.0 ports (U SB) allow you to c onnect USB devices such as external game pads, pointing devices, keyboards and/or speakers. There are four USB 2.0 ports on your notebook: two on the left side and two on the rear .
91 - Devi ce P or ts IEEE 1394 P ort The 4-pin 1394 port allows you to connect digital devices that are compliant with IEEE 1394 standard. The IEEE 1394 standard is easy to use, connect, a nd disconnect. This port can allow up to 400 Mbps transfer rate.
92 - Devi ce P or ts Headphone Jac k The headphone jack allows you to connect headphone s or powered external speakers to your notebook. Y our headphones or speakers must be equipped with a 1/8” (3.5 mm) stereo mini-p lug. In order to connect headphones or speakers follow these easy steps: 1 Align the connector with the port opening.
93 - Devi ce P or ts Figure 25. Connecting an External Video Device.
94 Chapter 4 T r oub leshooting Y our LifeBook T r oubleshooting There may be occasions when you encounter simple setup or opera ting problems that you can solve on the spot, or problems with peripheral devices th at can be solved by replacing the device.
95 - T roubleshooting Y our LifeBook 7 If the prob lem has not been resolv ed, ref er to the T roubleshooting T able , that f ollows, f or mor e detailed troubleshooting in f or mation.
96 - T roubleshooting Y our LifeBook Specific Prob lems Using the T roublesho oting T able When you have problems with your LifeBook notebook, try to find th e symptoms under the Problem column of the troubleshooting table for the feature giving you difficul ty .
97 - T roubleshooting Y our LifeBook Pr oblem P ossib le Cause Possible Solutions Audio Pr oblems There is no sound coming from the built-in speak er . The volume is turned too low . Adjust the volume control on your notebook and operating system. Use the [Fn+F9] ke y co mbination on your k eyboard.
98 - T roubleshooting Y our LifeBook LifeBook notebook f ails to recognize D VD/CD- R W/CD-ROM’ s . (continued) Optical drive tra y is not latched shut.
99 - T roubleshooting Y our LifeBook Floppy Di sk Drive Prob lems Y ou cannot access your optional external floppy disk. Y ou tried to write to a wr ite protected flopp y disk. Eject the disk and set it to wr ite enable . Disk is not loaded correctly .
100 - T roubleshoot ing Y our Life Book Y ou hav e connected an e xter nal ke yboard or a mouse and it seems to be locking up the system. Y our operating system is not setup with correct software driver f or that device . Check y our device and oper ating system doc umentati on and activate the proper driver .
101 - T roubleshoot ing Y our Life Book Y ou ha v e installed a USB de vice. Y our Lif eBook notebook does not recog- nize th e de vice, or the de vice does not seem to work proper ly . (continued) Y ou ma y hav e the wrong I/O address selected fo r your de vice.
102 - T roubleshoot ing Y our Life Book Y ou turn on your Lif eBook notebook and nothin g seems to happen. (continued) The batter y is installed but is fa ul t y . Use the Status Indicator panel to verify the presence and condition of the batter y . See “Status Indicato r P anel” on page 30.
103 - T roubleshoot ing Y our Life Book Y our Life Book noteboo k turns off all by itself . (continued) Y ou hav e a battery failure. V er ify the condition of the battery using the Status Indicator panel. If the batter y is shor ted, replace or remov e it.
104 - T roubleshoot ing Y our Life Book The batter y seems to discharge too quickly (continued) The batter y has been exposed to high tempera- tures. Replace the batte ry . The battery is too hot or too cold. Restore the notebo ok to normal operating te mperature.
105 - T roubleshoot ing Y our Life Book Y our notebook appears to change setup p arameters when you star t it. BIOS setup changes were not sav ed when made a nd you exited the setup utility . Make sure y ou select Save C hanges And Exit when e xiting the BIOS setup utility .
106 - T roubleshoot ing Y our Life Book The display goes blank by itself after you hav e been using it. The notebook has gone into Video timeout, Standby mode, or Sa ve-to-Disk mode because you ha ve not used it f or a peri od of time. Press any b utton on the ke yboard, or mov e the mouse to restore operation.
107 - T roubleshoot ing Y our Life Book The Display is dark when on batter y power . The P ower Management util- ity def ault is set on low bright- ness to conser v e power . Press [Fn] + [F7] to increase brightness or dou ble-clic k on the batter y gauge and adjust P ower Control under batter y settings.
108 - T roubleshoot ing Y our Life Book P o wer On Self T es t Messages The following is an alphabetic list of error -and- status messages that Phoenix BIOS and/or your operating system can generate and an explanation of each message. Error messages are marked with an *.
109 - T roubleshoot ing Y our Life Book *Fixed Disk x F ailure or Fixed Disk Contr oller F ailure (where x = 1-4) The fixed disk is not working or not configured properly . This may mean that the hard drive type identified in your setup utility does not agree with the type detected by the Power On Self T est.
110 - T roubleshoot ing Y our Life Book *Ke yboar d error nn BIOS discovered a stuck key and displays the scan code for the stuck key . Y ou may have to replace your keyboard but may be able to use an exte rnal keyboard until then. Contact your support representative.
111 - T roubleshoot ing Y our Life Book *Press <F1> to resume, <F2> to SETUP Displayed after any recoverable error message. Press the [F1] key to continue th e boot process or the [F2] key to enter Setup and change any settings.
112 - T roubleshoot ing Y our Life Book *System CMOS chec ksum bad – run SETUP BIOS CMOS RAM has been corrupted or modified incorrectly , perhaps by an application program that changes data stored in BIOS memo ry . Run Setup and reconfigure the system.
113 - Restoring Y our Pre-instal led Software Restoring Y our Pre-installed Software The Drivers and Applications Restore (DAR) DVD contai ns sets of device driv ers and Fujitsu utilities (in specific directories) that are unique to your computer configuration fo r use as documented below .
114 - Restoring Y our Pre-instal led Software 4 In the list, chec k off all the components y ou want to install. If you w ant to install all components , click [ Select All]. Clicking [Select All] will select all of the blue -coded compo nents; y ou must select gre y and green compon ents separately .
115 - Restoring Y our Pre-instal led Software BOO T Priority Change Before restoring an image, you must first verify th at the system is set up to boot from the DVD drive.
116 - Restoring Y our Pre-instal led Software Proced ure 1 T urn on the power to your system. 2 Ensure that y ou hav e a de vice that can read D VDs either installed in y our system or atta ched externally to it. 3 Inser t the Restore Disc into the driv e tra y .
117 - Restoring Y our Pre-instal led Software In order to determine the method for accessing the Recovery and Utility applet, perform the following procedures in order . Determining whether Re covery and Utility is pre-l oaded 1 T urn on or reboot yo ur system.
118 - Restoring Y our Pre-instal led Software BOO T Priority Change Before restoring an image, you must first verify th at the system is set up to boot from the DVD drive.
119 - Restoring Y our Pre-instal led Software 3 Inser t the Recovery and Utility disc in to the drive tra y . With the boot prio r ity set in the procedure abo ve , the system will boot from the Recov er y and Utility disc. 4 Reboot your system. After the system reboots, the Recov er y and Ut ility screen appears.
120 - Restoring Y our Pre-instal led Software The FDU icon should appear in the system tray at the bottom right of your screen (roll the cursor over the icons to find the correct one). If the icon does not appear in the system tr ay , go to [Start] -> All Programs, and click on Fujitsu Driver Update; this will create the icon automatically .
121 Chapter 5 Care and Maintenance Caring f or y our LifeBook Notebook If you use your Fujitsu LifeBook notebook carefully , you will increase its life and reliability .
122 - Care and Maintenan ce • Y our LifeBook notebook is a durable but sensitive electronic device. T reat it with respect and care. • Make a habit of transporting it in a suitable carrying case. • Do not attempt to service the c omputer yourself.
123 - Care and Maintenan ce Cleaning y our LifeBook notebook • Always disconnect the power pl ug. (Pull the plug, not the cord.) • Clean your LifeBook notebook with a damp, lint-free cloth. Do not use abrasives or solvents. • Use a soft cloth to remove dust from the screen.
124 - Care and Maintenan ce • T ake the necessary plug adapters if you're trav eling overseas. Check the following diagram to determine which plug adapter you'll need or ask your travel agent. • It is recommended that you carry your notebook with you while traveling, rather than checking it in as baggage.
125 - Care and Maintenan ce • Do not drop, puncture, disassemble, mu tilate or incinerate the battery . • Recharge batteries only as described in this manual and only in ventilated areas. • Do not leave batteries in hot loca tions for more than a day or two.
126 - Care and Maintenan ce • Do not bend media discs or set heavy objects on them. • Do not spill liquids on media discs. • Do not scratch media discs. • Do not get dust on media discs. • Never write on the label surface with a ballpoi nt pen or pencil.
127 - Care and Maintenan ce PC Cards Caring f or y our Car ds PC Cards are durable, but you must treat them with care. The documentation supplied with your card will provide specific information, but .
128 Chapter 6 System Specifications Specifications This section provides the hardware and environmental specifications for your Fujitsu LifeBook notebook.
129 - Speci fications Micr oprocessor Intel® Core™ 2 Duo Ultra Low V oltage processors (Refer to the system label to determine the speed of your processor). Chipset • Intel GM965 • I/O Controller Hub 8 Mobile (ICH8-M) Memory System Memory • DDR2-533 MHz SDRAM dual-channel memory module.
130 - Speci fications Video RAM Intel® Graphics Media Accelerator X3100 video graphics. Up to 384 MB shared vid eo memory using Dynamic V ideo Memory T echnology (DVMT) A udio • Realtek codec ALC262 with High Definition (HD) audio. • Headphones: Stereo headphone jack, 3.
131 - Speci fications T rusted Platf orm Module The LifeBook T2010 has a T rusted Platform Module (TPM) installed for added system security . LifeBook Security/Applicatio n Pane l Theft Prevention Loc k T wo lock slots for use with security restraint systems.
132 - Speci fications • One stereo headphone jack • One stereo microphone/line-in jack • Dedicated Smart Card slot (requires third-party application) • W ireless LAN a ntenna with pre-installed on/off switch On the Optional P o r t Replicator: • One 15-pin D-SUB connector for VGA external monitor • Four USB 2.
133 - Speci fications Po w e r Batteries • Standard Lithium ion battery , rechargeable, 6-cell 10.8V , 5800 mAh, or , • High capacity 9-cell Lithium ion ba ttery , rechargeable, 10.8V , 8700 mAh AC A d a p t e r Autosensing 100-240V AC, supplying 16V DC, 3.
134 - Speci fications P opular Accessories For ordering or additional information on Fuji tsu accessories please visit o ur W eb site at www .shopfujitsu.
135 - Speci fications Learning About Y our Software Tu t o r i a l s All operating systems and most appli cation software have tutorials bui lt into them upon installation. W e highly recommend that you step through the tutorial before you use an application.
136 - Speci fications CyberLink P owerD VD (A vailable with some configurati ons of the optional port replicator). PowerDVD from CyberLink is a versatile DVD player software a pplication. PowerDVD provides high-quality video and audio playback on your system.
137 - Speci fications Micr osoft OneNote OneNote lets you collect all of your notes and info rmation in an electronic “notebook” so that you can organize your pictures, text, notes, and audio/ video files in a single, searchable place.
138 Glossary AC A d a p t e r A device which converts the AC volta ge from a wall outlet to the DC voltage needed to power your LifeBook notebook. Access point W ireless network device used to bri dge wireless and wired network traf fic.
139 - Glossary Asymmetric Digital Subscr iber Line. T echnology for transporting high bit-rate services over ordinary phone lines. AG P Accelerated Graphics Port. Graphics port specifically designed for graphics-intensive devices, such as video cards and 3D accelerators.
140 - Glossary Bus An electrical circuit which passes data between the CPU and the s ub-assemblies insi de your LifeBook notebook. Byte 8 bits of parallel binary information.
141 - Glossary COM P ort Abbreviation for communication port. This is your serial interface connection. Command An instruction which you give your operating system. Example: run a pa rticular application or format a floppy disk. Configuration The combination of hardware and software that make s up your system and how it is alloc ated for use.
142 - Glossary DIMM Dual-in-line memory module. Disk A spinning platter of magnetic data storage media. If the platter is very stif f it is a hard drive, if it is highly flexible it is a floppy disk, if it is a floppy disk in a hard housing with a shutter it is commonly called a diskette.
143 - Glossary DOS Disk Operating System (MS-DOS is a Microsoft Disk Operating System). Driver A computer program which converts application and operating system commands to ex ternal devices into the exact form required by a specific brand and model of device in order to produce the desired results from that pa rticular equipment.
144 - Glossary Floppy Disk A spinning platter of magne tic data storage media which is highly flexible. GB Gigabyte. One billion bytes. Hard drive A spinning platter of magnetic data storage media where the platter is ve ry stiff. I/O Input/Output. Data entering and leavi ng your notebook in electronic form.
145 - Glossary IEEE802.11g W ireless LAN standard that supports a maximum data rate of 54 Mbps. 802.1 1g devices operate in the 2.4 GHz ISM band. Infrared Light just beyond the red portion of the visible light spectrum which is invisible to humans. Infrastructure A name of a wireless LAN configur ation.
146 - Glossary IR An abbreviation for infrared. IrD A Infrared Data Association. An or ganization which produces st andards for communication using infrared as the carrier . IRQ Interrupt Request. An acronym for the hardware signal to the CPU that an exte rnal event has occurred which needs to be processed.
147 - Glossary MA C Address Media Access Control Address. A unique physical address of a netw ork card. For Ethernet, the first three bytes are used as the vendor code, controlled and assigned by IEEE.
148 - Glossary MTU Maximum T ransmission Unit The maximum data size that can be transferred at a time through the Internet or other networks. Y ou can set a smaller MTU size to obt ain successful communi cation, if you have di fficulty transferring data due to the fact that the maximum size is too large.
149 - Glossary Pa r t i t i o n A block of space on a hard drive which is set aside and made to appear to the operating system as if it were a separate disk, and addressed by the operating system accordingly . PCMCIA PCMCIA is a trademark of the Personal Computer Memory Card International Association.
150 - Glossary Program An integrated set of coded commands to your computers telling your hardware what to do and how and when to do it. Protoco l Procedures and rules use to send and receive data between computers.
151 - Glossary ROM Read Only Memory . A form of memory in which information is stored by physically altering the material. Data stored in this way can not be changed by your not ebook and does not require power to maintain it. SDRAM Synchronous Dynamic Random Access Memory .
152 - Glossary Status Indicator A display which reports the condi tion of some portion of your ha rdware. On your LifeBook notebook this is an LCD screen just above the keyboard. Stereo (audio) A system using two channels to pro cess sound from two dif ferent sources.
153 - Glossary TFT Thin Film T r ansistor – A technology for flat display panels which uses a thin film matrix of transistors to control each pixel of the display screen individually . UL Underwriters Laboratories – An inde pendent organization that tests and certifies the electrical safety of devices.
154 - Regulato ry I nf or mation Regulatory Information Notice Changes or modifications not expre ssly approved by Fujitsu could void th is user ’ s authority to operate the equipment.
155 - Regulato ry I nf or mation Notice to Users of the US T elephone Network This equipment complies with Pa rt 68 of the FCC rules, and the requirements adopted by ACT A.
156 - Regulato ry I nf or mation The equipment cannot be used on public coin service provided by the telephone company . Connection to party line service is subject to state tariffs. (Contact the state public utility commission, public service commission or corporati on commission for information).
157 - Regulato ry I nf or mation Before connecting this equipment to a telephone line the user should ensure that it is permissible to connect this equipment to the local telecommunica tion facilities. The user should be aware that compliance with the certification standards does not prevent service degradation in some situations.
158 - Regulato ry I nf or mation A vant de connecter cet équipement à une ligne téléphonique, l’utilisateur doit vérifi er s’il est permis de connecter cet équipement aux in stallations de télécommunications lo cales.
159 Appendix A: WLAN User’ s Guide FCC Regulator y Information Please note the following regulatory information related to the optional wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and A uthorization f or use Radio frequency electromagnetic ener gy is emitted from W ireless LA N de vices.
160 Regulatory Inform ation/Disclaimer s Installation and use of this W ireless LAN device must be in strict accordance with the instru ctions included in the user documentation provided with the produ ct.
161 FCC Radio Frequenc y Exposure statement The available sc ienti fic evide nce does not show that any health problems are ass ociate d with usi ng low power wireless devices. Ther e is no proof, however , that these low power wirele ss devices are absolutely safe.
162 Bef ore Using the Optional Wire less LAN Bef ore Using the Optional Wireless LAN This manual describes the procedures required to pr operly set up and configure the optional integrated W ireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual).
163 Bef ore Using the Optional Wire less LAN Wireless LAN Modes Using this Device Ad Hoc Mode "Ad Hoc Mode" refers to a wireless network archit ecture where wireless network connectivity between multiple computers is established without a central wireless ne twork device, typically known as Access Point(s).
164 Bef ore Using the Optional Wire less LAN Access P oint (Infrastruc ture) Mode Infrastructure mode refers to a wi reless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point.
165 Bef ore Using the Optional Wire less LAN How to Handle This De vice The WLAN device is an optional de vice that may come pre-installe d in your mobile computer . Under normal circumstances, it s hould not be necessary for you to remove or re-install it.
166 Bef ore Using the Optional Wire less LAN Deactiv ation Using the Wireless On/Off Switch The WLAN device can be deactivated quickly and ef ficiently by toggling th e W ireless LAN/Bluetooth On/Off Switch to the Of f position. The switch has no ef fect on non-W ireless LAN models.
167 Configuring the Wirele ss LAN Configuring the Wireless LAN The optional WLAN device can be configured to es tablish wireless network connectivity using the software that is built into W indows V ista. Support for most industry standard security solutions is contained in this software.
168 Configuring the Wirele ss LAN Configuring the WLAN Using Windows XP Proced ure 1 Click the St ar t button, then select Control P anel. 2 If the Control P anel is not in Classic View , select Cla ssic View from the le ft pane l. Double-clic k the Network Connections icon.
169 T roubleshoot ing the WLAN T r oubleshooting the WLAN T roubleshooting Causes and countermeasures for troubles you may enc ounter while using your wi reless LAN are described in the following table.
170 T roubleshoot ing the WLAN Unav ailabl e network connection (continued) The computer to be connected is turned off Chec k if the computer to be conne cted is tur ned ON.
171 WLAN Sp ecificatio ns WLAN Specifications Specifications Item Specification T ype of network The Intel PRO/Wireless 4965AGN Network Connections WLAN device conf orms to IEEE 802.11a, 802.11b/g, and 802.1 1n (draft-compliant), Wi-Fi based*. The Atheros AR5006EXS (AR5BXB6) Mini-Card Wireless network card conforms to IEEE802.
172 WLAN Sp ecificatio ns * “W i-Fi based” in dicates that the interconnectivity test of the organizati on which guarantees th e interconnectivity of wireless LAN (W i-Fi Alli ance) has been passed.
173 Using the Blueto oth Devi ce Using the Bluetooth De vice The Integrated Bluetooth module (EYTF3CSFT) is an optional device available for Fujitsu mobile computers. What is Bluetooth Bluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop computers, phones, printers, and cameras.
174 Using the Blueto oth Devi ce FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set fort h for an uncontrolled environment. The Bluetooth antenna is located on the front edge of the right palm rest and is exempt from minimum distance criteria due to its low power .
175 Appendix B: Fingerprint Sensor Device Intr oducing the Fing erprint Sensor De vice Y our system has a fingerprint sensor device at the bottom left below the display screen.
176 - Intro ducing the Fi ngerpr int Senso r De vice After you have “enrolled” - or regi stered - your fingerpri nt, you can simply swipe your fingertip over the sensor for the system recognize you. The fingerprint sensor uses Softex OmniPass wh ich provides password mana gement capabilities to Microsoft W indows operating systems.
177 - Intro ducing the Fi ngerpr int Senso r De vice • W indows XP Professional operating system • At least 35 MB available hard disk space Installing the OmniP ass Application If OmniPass is already installed on your system, go to “User Enrollment” on page 178 .
178 - Intro ducing the Fi ngerpr int Senso r De vice 1 F rom the Windo ws Desktop , doub le-click the k e y-shaped OmniP ass icon in th e taskbar (usually located in the low er right cor ner of the sc.
179 - Intro ducing the Fi ngerpr int Senso r De vice Master P assw or d Concept Computer resources are often prot ected with passwords. Whether you are logging into your computer , accessing your email, e-banking, paying bills online, or accessing network resources, you often have to supply credentials to gain access.
180 - Intro ducing the Fi ngerpr int Senso r De vice Basic Enr ollment The Enrollment W izard will guide you through the pr ocess of enrolling a us er . Unless you specified otherwise, after OmniPass inst allation the Enrollment W i zard will launch on W i ndows login.
181 - Intro ducing the Fi ngerpr int Senso r De vice Enrollin g a Fingerprint Enrolling a fingerprint will increase the security of your system and streamline the authentication procedure. Y ou enroll fingerprints in the OmniPass Control Cent er . W ith an OmniPass user logged in, double-click the system tray OmniPass icon.
182 - Intro ducing the Fi ngerpr int Senso r De vice Using OmniP ass Y ou are now ready to begin using OmniPass. Us ed regularly , OmniPass will streamline your authentications. P assw ord Repl acement Y ou will often use the password re placement function.
183 - Intro ducing the Fi ngerpr int Senso r De vice Using the following procedure, you can store a set of credentials into OmniPass. These credentials will then be linked to your “master password” or fingerprint. Go to a site that requires a login (usern ame and password), but do not log in yet.
184 - Intro ducing the Fi ngerpr int Senso r De vice If you uncheck both boxes in Settings for this Password Site, OmniPass will prom pt you for your master password or fingerprint authentication device.
185 - Intro ducing the Fi ngerpr int Senso r De vice Logging into Windo ws with a Fingerprint Device When logging into W indows with a fingerprint device, the fingerprint capture window will now appear next to the W indows Login screen. Place your enrolled fingertip on the sensor to authenticate.
186 - Intro ducing the Fi ngerpr int Senso r De vice The two check boxes in Manage Passwords govern whether OmniPass prom pts you to authenticate or directly logs you into the remembered site. OmniPass will overwrite an old set of creden tials for a website if you attempt to use Remember Password on an already remembered site.
187 - Intro ducing the Fi ngerpr int Senso r De vice T o set the default identity , highlight the identity you want as default and click [Set as Default]; click [Apply] to ensure the settings are saved. If you log in to OmniPass with a fingerprint device, you will automatically be logged in to the de fault identity for that OmniPass us er .
188 - Intro ducing the Fi ngerpr int Senso r De vice Configuring OmniP ass This section give s an overview of both the Export/Import f unction and the OmniPass Control Center . Exporting and Impor ting Users Using OmniPass Control Center , you can export and import users in and out of OmniPass.
189 - Intro ducing the Fi ngerpr int Senso r De vice This .opi file contains all your us er specific OmniPass data, and it is both encrypted and password protected.
190 - Intro ducing the Fi ngerpr int Senso r De vice OmniP ass Control Center This section will serve to explain functions within the OmniPass Control Center that weren’ t explained earlier .
191 - Intro ducing the Fi ngerpr int Senso r De vice User Settings The User Settings tab has four interfaces: Audio Settings , T askbar Tips , and Enr ollment .
192 - Intro ducing the Fi ngerpr int Senso r De vice T roubleshooting Y ou cannot use OmniPass to create W i ndows users. Y ou must first crea te the W indows user , and you will need administrative privileges to do that.
193 - Intro ducing the Fi ngerpr int Senso r De vice If you are having diff iculti es due to the first re ason, you will need to upda te OmniPass with your changed W indows account password. Click Update Password and you will be prom pted with a dialog to reconfirm your password.
194 Inde x A About This G uide 1 , 13 AC adapter 62 plug adapters 124 Air Ve nts 27 , 29 Anti-theft lo ck slot 27 Auto/Airline A dapter 62 Automatically Downl oading Driver Updates 119 B Battery 76 ca.
195 Display Panel 20 , 32 brightnes s 34 opening 33 problems 105 , 106 Dock port 18 Docki ng Port 89 Double-Clicking 40 Draggi ng 41 Drivers and Application Restore CD 113 Dual Built-in Microphones 21.
196 K Keyboard 20 , 36 cursor keys 37 function keys 37 numeric keypad 37 problems 99 windows keys 37 L Left Button 21 LifeBook Security Panel operating 56 passwords 55 setting up 54 uninstalli ng 58 L.
197 AC adapter 61 Auto/Airline ad apter 61 failure 101 , 102 management 71 off 75 on 63 problems 104 sources 61 Power Management 71 Power On Self Tes t 63 , 108 Power/Suspend/Resume Button 20 , 71 Pre.
198 Tablet PC Button Functions changing 53 Touch Screen 42 calibrating 44 clicking 43 dragging 44 Troubleshooting 94 U Universal Serial Bus Ports 90 USB 90 , 100 problems 100 , 101 USB 2.
Ein wichtiger Punkt beim Kauf des Geräts Fujitsu T2010 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Fujitsu T2010 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Fujitsu T2010 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Fujitsu T2010 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Fujitsu T2010 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Fujitsu T2010 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Fujitsu T2010 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Fujitsu T2010. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Fujitsu T2010 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
